From 70c55f5ab324d43093f1c8745462d92042b7306d Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Wed, 11 May 2011 12:22:46 +0000 Subject: [PATCH] mvsata: issue hard reset on initialization Before the actual initialization do a hard reset of the SATA port and the connected device. changes v1->v2: - add comment for udelay Signed-off-by: Michael Walle Cc: Prafulla Wadaskar Cc: Albert Aribaud --- drivers/block/mvsata_ide.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c index e0e4097593..1be395fb45 100644 --- a/drivers/block/mvsata_ide.c +++ b/drivers/block/mvsata_ide.c @@ -33,7 +33,9 @@ /* SATA port registers */ struct mvsata_port_registers { - u32 reserved1[192]; + u32 reserved0[10]; + u32 edma_cmd; + u32 reserved1[181]; /* offset 0x300 : ATA Interface registers */ u32 sstatus; u32 serror; @@ -76,6 +78,7 @@ struct mvsata_port_registers { * and for SStatus DETection. */ +#define MVSATA_EDMA_CMD_ATA_RST 0x00000004 #define MVSATA_SCONTROL_DET_MASK 0x0000000F #define MVSATA_SCONTROL_DET_NONE 0x00000000 #define MVSATA_SCONTROL_DET_INIT 0x00000001 @@ -115,6 +118,11 @@ static int mvsata_ide_initialize_port(struct mvsata_port_registers *port) u32 status; u32 timeleft = 10000; /* wait at most 10 ms for SATA reset to complete */ + /* Hard reset */ + writel(MVSATA_EDMA_CMD_ATA_RST, &port->edma_cmd); + udelay(25); /* taken from original marvell port */ + writel(0, &port->edma_cmd); + /* Set control IPM to 3 (no low power) and DET to 1 (initialize) */ control = readl(&port->scontrol); control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT; -- 2.25.1