From 70c4c032ea112cc42aa1ce959c33fc4825eaef95 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 1 Jun 2008 01:23:48 -0400 Subject: [PATCH] Blackfin: enable support for nested interrupts During cpu init, make sure we initialize the CEC properly so that interrupts can fire and be handled while U-Boot is running. Signed-off-by: Mike Frysinger --- cpu/blackfin/start.S | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/cpu/blackfin/start.S b/cpu/blackfin/start.S index 8303292a50..c4d52b4857 100644 --- a/cpu/blackfin/start.S +++ b/cpu/blackfin/start.S @@ -75,7 +75,7 @@ ENTRY(_start) serial_early_puts("Init Registers"); - /* Disable nested interrupts and enable CYCLES for udelay() */ + /* Disable self-nested interrupts and enable CYCLES for udelay() */ R0 = CCEN | 0x30; SYSCFG = R0; @@ -180,7 +180,7 @@ ENTRY(_start) /* Now lower ourselves from the highest interrupt level to * the lowest. We do this by masking all interrupts but 15, - * setting the 15 handler to "board_init_f", raising the 15 + * setting the 15 handler to ".Lenable_nested", raising the 15 * interrupt, and then returning from the highest interrupt * level to the dummy "jump" until the interrupt controller * services the pending 15 interrupt. @@ -190,8 +190,8 @@ ENTRY(_start) r1 = r6; p0.l = LO(EVT15); p0.h = HI(EVT15); - p1.l = _cpu_init_f; - p1.h = _cpu_init_f; + p1.l = .Lenable_nested; + p1.h = .Lenable_nested; [p0] = p1; p2.l = LO(IMASK); p2.h = HI(IMASK); @@ -204,6 +204,12 @@ ENTRY(_start) reti = p4; rti; + /* Enable nested interrupts before continuing with cpu init */ +.Lenable_nested: + cli r7; + [--sp] = reti; + jump.l _cpu_init_f; + .LWAIT_HERE: jump .LWAIT_HERE; ENDPROC(_start) -- 2.25.1