From 6fd2ed531909f295e03cbba0fed2b00dada6b308 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 24 Apr 2006 12:09:31 +0000 Subject: [PATCH] Merge 2.4 patches to 2.6 kernel. Update kernel config SVN-Revision: 3704 --- openwrt/target/linux/au1000-2.6/config | 21 +- .../patches/004-mtx1_watchdog.patch | 26 +- .../patches/005-au1000_eth_link_beat.patch | 24 ++ .../patches/006-mtx1_system_button.patch | 241 ++++++++++++++++++ .../au1000-2.6/patches/007-mtx1_sio2.patch | 13 + .../patches/008-isdel_cardbus.patch | 63 +++++ 6 files changed, 363 insertions(+), 25 deletions(-) create mode 100644 openwrt/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch create mode 100644 openwrt/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch create mode 100644 openwrt/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch create mode 100644 openwrt/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch diff --git a/openwrt/target/linux/au1000-2.6/config b/openwrt/target/linux/au1000-2.6/config index bb7e267ad1..aaf89b52c5 100644 --- a/openwrt/target/linux/au1000-2.6/config +++ b/openwrt/target/linux/au1000-2.6/config @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.16.7 -# Sat Apr 22 16:46:55 2006 +# Sun Apr 23 13:43:59 2006 # CONFIG_MIPS=y @@ -676,7 +676,12 @@ CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set -# CONFIG_IMQ is not set +CONFIG_IMQ=m +# CONFIG_IMQ_BEHAVIOR_AA is not set +# CONFIG_IMQ_BEHAVIOR_AB is not set +CONFIG_IMQ_BEHAVIOR_BA=y +# CONFIG_IMQ_BEHAVIOR_BB is not set +CONFIG_IMQ_NUM_DEVS=2 CONFIG_TUN=m # @@ -875,17 +880,15 @@ CONFIG_MTX1_WATCHDOG=y # # PCI-based Watchdog Cards # -CONFIG_PCIPCWATCHDOG=m -CONFIG_WDTPCI=m -CONFIG_WDT_501_PCI=y +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set -CONFIG_RTC=m -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -1250,7 +1253,7 @@ CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y +# CONFIG_ROOT_NFS is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y diff --git a/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch b/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch index 3edd749bb8..c7e329b295 100644 --- a/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch +++ b/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch @@ -1,6 +1,6 @@ diff -urN linux-2.6.16.7/drivers/char/watchdog/Kconfig linux-2.6.16.7.new/drivers/char/watchdog/Kconfig --- linux-2.6.16.7/drivers/char/watchdog/Kconfig 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7.new/drivers/char/watchdog/Kconfig 2006-04-22 16:40:32.000000000 +0200 ++++ linux-2.6.16.7.new/drivers/char/watchdog/Kconfig 2006-04-22 23:23:53.000000000 +0200 @@ -460,6 +460,14 @@ timer expired and no process has written to /dev/watchdog during that time. @@ -18,7 +18,7 @@ diff -urN linux-2.6.16.7/drivers/char/watchdog/Kconfig linux-2.6.16.7.new/driver config ZVM_WATCHDOG diff -urN linux-2.6.16.7/drivers/char/watchdog/Makefile linux-2.6.16.7.new/drivers/char/watchdog/Makefile --- linux-2.6.16.7/drivers/char/watchdog/Makefile 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7.new/drivers/char/watchdog/Makefile 2006-04-22 16:38:31.000000000 +0200 ++++ linux-2.6.16.7.new/drivers/char/watchdog/Makefile 2006-04-22 23:21:18.000000000 +0200 @@ -65,6 +65,7 @@ # MIPS Architecture @@ -29,8 +29,8 @@ diff -urN linux-2.6.16.7/drivers/char/watchdog/Makefile linux-2.6.16.7.new/drive diff -urN linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c --- linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c 2006-04-22 16:38:49.000000000 +0200 -@@ -0,0 +1,252 @@ ++++ linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c 2006-04-22 23:20:53.000000000 +0200 +@@ -0,0 +1,246 @@ +/* + * Driver for the MTX-1 Watchdog. + * @@ -119,7 +119,7 @@ diff -urN linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c linux-2.6.16.7.n +{ + if (timer_is_running) + mod_timer (&wd_trigger_timer, jiffies + 5 * HZ); -+ mtx1_trigger_wd (); ++ mtx1_trigger_wd(); +} + +static void start_wd_timer (void) @@ -241,17 +241,6 @@ diff -urN linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c linux-2.6.16.7.n +//---------[ Module Functions ]----------------- + + -+void cleanup_module (void) -+{ -+ // stop the timer, if it is running. -+ stop_wd_timer(); -+ -+ misc_deregister(&mtx1wd_miscdev); -+ -+ mtx1_disable_wd (); -+} -+ -+ +static int __init init_mtx1_watchdog(void) +{ + printk("MTX-1 watchdog driver\n"); @@ -274,7 +263,12 @@ diff -urN linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c linux-2.6.16.7.n + +static void __exit exit_mtx1_watchdog(void) { + ++ // stop the timer, if it is running. ++ stop_wd_timer(); ++ + misc_deregister(&mtx1wd_miscdev); ++ ++ mtx1_disable_wd(); +} + +module_init(init_mtx1_watchdog); diff --git a/openwrt/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch b/openwrt/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch new file mode 100644 index 0000000000..946bd84540 --- /dev/null +++ b/openwrt/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch @@ -0,0 +1,24 @@ +diff -urN linux-2.6.16.7/drivers/net/au1000_eth.c linux-2.6.16.7.new/drivers/net/au1000_eth.c +--- linux-2.6.16.7/drivers/net/au1000_eth.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/drivers/net/au1000_eth.c 2006-04-23 01:42:48.000000000 +0200 +@@ -12,6 +12,9 @@ + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or source@mvista.com + * ++ * Bjoern Riemer 2004 ++ * riemer@fokus.fraunhofer.de or riemer@riemer-nt.de ++ * // fixed the link beat detection with ioctls (SIOCGMIIPHY) + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it +@@ -1672,6 +1675,10 @@ + aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed); + control = MAC_DISABLE_RX_OWN | MAC_RX_ENABLE | MAC_TX_ENABLE; + #ifndef CONFIG_CPU_LITTLE_ENDIAN ++ /*riemer: fix for startup without cable */ ++ if (!link) ++ dev->flags &= ~IFF_RUNNING; ++ + control |= MAC_BIG_ENDIAN; + #endif + if (link && (dev->if_port == IF_PORT_100BASEFX)) { diff --git a/openwrt/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch b/openwrt/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch new file mode 100644 index 0000000000..511df2c8da --- /dev/null +++ b/openwrt/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch @@ -0,0 +1,241 @@ +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c 2006-04-23 11:54:31.000000000 +0200 +@@ -64,6 +64,7 @@ + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, ++ { AU1500_GPIO_207, INTC_INT_RISE_AND_FALL_EDGE, 0 }, + }; + + int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile 2006-04-23 14:01:36.000000000 +0200 +@@ -8,3 +8,4 @@ + # + + lib-y := init.o board_setup.o irqmap.o ++obj-y := mtx-1_sysbtn.o +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c 2006-04-23 14:01:17.000000000 +0200 +@@ -0,0 +1,218 @@ ++/* ++ * Driver for the MTX-1 System Button. ++ * ++ * (c) Copyright 2005 4G Systems , All Rights Reserved. ++ * http://www.4g-systems.biz ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ * ++ * Neither Michael Stickel nor 4G Systeme GmbH admit liability nor provide ++ * warranty for any of this software. This material is provided ++ * "AS-IS" and at no charge. ++ * ++ * (c) Copyright 2005 4G Systems ++ * ++ * Release 0.01. ++ * ++ * Author: Michael Stickel michael.stickel@4g-systems.biz ++ * ++ * ++ * After the module is loaded there is a device /dev/misc/btn ++ * that can be read. It returns one char '1' if the button ++ * has been pressed an '0' if it has been released. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++ ++ ++#ifndef FALSE ++# define FALSE (0) ++#endif ++ ++#ifndef TRUE ++# define TRUE (!FALSE) ++#endif ++ ++ ++//---------[ declarations ]----------------- ++ ++ ++static DECLARE_WAIT_QUEUE_HEAD(mtx1btn_wait_queue); ++static char state_changed; ++static char last_value; ++static char is_inuse; ++ ++ ++//---------[ Hardware Functions ]----------------- ++ ++// The MTX-1 Button is attached to GPIO207. ++#define MTX1_GPIO2_SYSBTN (7) ++#define MTX1_SYSBTN_IRQ (AU1500_GPIO_207) ++ ++ ++static char mtx1_getbtn (int btnno) ++{ ++ if (btnno==0) { ++ return (au_readl(GPIO2_PINSTATE) & (1<i_rdev)!=mtx1sysbtn_minor) return -ENODEV; ++ if (is_inuse) return -EBUSY; ++ is_inuse=1; ++ last_value = mtx1_getbtn(0); ++ state_changed = 0; ++ return 0; ++} ++ ++ ++static int mtx1sysbtn_release (struct inode *inode, struct file *file) { ++ if (MINOR(inode->i_rdev)==mtx1sysbtn_minor) { ++ is_inuse=0; ++ } ++ return 0; ++} ++ ++ ++static ssize_t mtx1sysbtn_read (struct file *file, char *buf, size_t count, loff_t *ppos) ++{ ++ if (count < 1) ++ return -EINVAL; ++ if (!state_changed) ++ interruptible_sleep_on (&mtx1btn_wait_queue); ++ state_changed = 0; ++ char c = last_value ? '1' : '0'; /* mtx1_getbtn(0) */ ++ if(copy_to_user(buf, &c, 1)) ++ return -EFAULT; ++ return 1; ++} ++ ++ ++static unsigned int mtx1sysbtn_poll (struct file *file, poll_table * wait) ++{ ++ unsigned int mask = 0; ++ ++ poll_wait (file, &mtx1btn_wait_queue, wait); ++ ++ if (state_changed) // state changed since last time. ++ mask |= POLLIN | POLLRDNORM; ++ ++ return mask; ++} ++ ++ ++static struct file_operations mtx1sysbtn_fops = { ++ .owner = THIS_MODULE, ++ .read = mtx1sysbtn_read, ++ .poll = mtx1sysbtn_poll, ++ .open = mtx1sysbtn_open, ++ .release = mtx1sysbtn_release ++}; ++ ++ ++static struct miscdevice mtx1sysbtn_miscdev = { ++ MISC_DYNAMIC_MINOR /* SYSBTN_MINOR */ , ++ "btn", ++ &mtx1sysbtn_fops ++}; ++ ++ ++ ++//---------[ Module Functions ]----------------- ++ ++ ++void __exit exit_mtx1_sysbtn (void) ++{ ++ is_inuse = 1; ++ mtx1_btn_stopirq (); ++ misc_deregister(&mtx1sysbtn_miscdev); ++} ++ ++ ++static int __init init_mtx1_sysbtn (void) ++{ ++ printk("MTX-1 System Button driver\n"); ++ is_inuse = 1; ++ mtx1_initbuttons (); ++ if (misc_register (&mtx1sysbtn_miscdev) >= 0) { ++ mtx1sysbtn_minor = mtx1sysbtn_miscdev.minor; ++ if (mtx1_btn_startirq () == 0) { ++ is_inuse=0; ++ return 0; ++ } ++ misc_deregister(&mtx1sysbtn_miscdev); ++ } ++ return 1; ++} ++ ++module_init(init_mtx1_sysbtn); ++module_exit(exit_mtx1_sysbtn); ++ ++MODULE_AUTHOR("Michael Stickel"); ++MODULE_DESCRIPTION("Driver for the MTX-1 system button"); ++MODULE_LICENSE("GPL"); diff --git a/openwrt/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch b/openwrt/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch new file mode 100644 index 0000000000..34d1005347 --- /dev/null +++ b/openwrt/target/linux/au1000-2.6/patches/007-mtx1_sio2.patch @@ -0,0 +1,13 @@ +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/board_setup.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/board_setup.c 2006-04-23 14:35:42.000000000 +0200 +@@ -71,9 +71,7 @@ + #endif + + // initialize sys_pinfunc: +- // disable second ethernet port (SYS_PF_NI2) +- // set U3/GPIO23 to GPIO23 (SYS_PF_U3) +- au_writel( SYS_PF_NI2 | SYS_PF_U3, SYS_PINFUNC ); ++ au_writel( SYS_PF_NI2, SYS_PINFUNC ); + + // initialize GPIO + au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR ); diff --git a/openwrt/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch b/openwrt/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch new file mode 100644 index 0000000000..9e54ac1c59 --- /dev/null +++ b/openwrt/target/linux/au1000-2.6/patches/008-isdel_cardbus.patch @@ -0,0 +1,63 @@ +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/board_setup.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/board_setup.c +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/board_setup.c 2006-04-23 14:39:21.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/board_setup.c 2006-04-23 14:39:03.000000000 +0200 +@@ -44,6 +44,9 @@ + #include + #include + ++extern int (*board_pci_idsel)(unsigned int devsel, int assert); ++int mtx1_pci_idsel(unsigned int devsel, int assert); ++ + void board_reset (void) + { + /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ +@@ -77,11 +80,37 @@ + au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR ); + au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF + au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF ++ au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON + au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF + + // enable LED and set it to green + au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR ); + au_writel( 0x18000800, GPIO2_OUTPUT ); + ++ board_pci_idsel = mtx1_pci_idsel; ++ + printk("4G Systems MTX-1 Board\n"); + } ++ ++int ++mtx1_pci_idsel(unsigned int devsel, int assert) ++{ ++#define MTX_IDSEL_ONLY_0_AND_3 0 ++#if MTX_IDSEL_ONLY_0_AND_3 ++ if (devsel != 0 && devsel != 3) { ++ printk("*** not 0 or 3\n"); ++ return 0; ++ } ++#endif ++ ++ if (assert && devsel != 0) { ++ // supress signal to cardbus ++ au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF ++ } ++ else { ++ au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON ++ } ++ au_sync_udelay(1); ++ return 1; ++} ++ +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c 2006-04-23 14:40:54.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c 2006-04-23 14:40:12.000000000 +0200 +@@ -48,7 +48,7 @@ + #include + + char irq_tab_alchemy[][5] __initdata = { +- [0] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */ ++ [0] = { -1, INTA, INTA, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */ + [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ + [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */ + [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ -- 2.25.1