From 6f1c0430e88396abc8e6a91ab3cc78882c76cb7c Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Mon, 1 Oct 2018 12:22:36 -0600 Subject: [PATCH] cros: Update ec_commands to latest version This file has changed quite a bit in the last 5 years as the capabilities of the ECs have grown. Sync it up with the copy in coreboot commit b9141f2215. The only change is the addition of EC_VBNV_BLOCK_SIZE_V2. This is needed because U-Boot uses the new v2 vboot API and this is not currently fully supported by Chromium OS firmware. Signed-off-by: Simon Glass --- cmd/cros_ec.c | 5 +- drivers/misc/cros_ec.c | 7 +- drivers/misc/cros_ec_sandbox.c | 4 +- include/ec_commands.h | 4324 ++++++++++++++++++++++++++------ 4 files changed, 3613 insertions(+), 727 deletions(-) diff --git a/cmd/cros_ec.c b/cmd/cros_ec.c index fb369a4e32..3ac4f3b235 100644 --- a/cmd/cros_ec.c +++ b/cmd/cros_ec.c @@ -27,7 +27,7 @@ static int cros_ec_decode_region(int argc, char * const argv[]) { if (argc > 0) { if (0 == strcmp(*argv, "rw")) - return EC_FLASH_REGION_RW; + return EC_FLASH_REGION_ACTIVE; else if (0 == strcmp(*argv, "ro")) return EC_FLASH_REGION_RO; @@ -137,7 +137,6 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } printf("rows = %u\n", info.rows); printf("cols = %u\n", info.cols); - printf("switches = %#x\n", info.switches); } else if (0 == strcmp("curimage", cmd)) { enum ec_current_image image; @@ -177,7 +176,7 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) region = cros_ec_decode_region(argc - 2, argv + 2); if (region == EC_FLASH_REGION_RO) cmd = EC_REBOOT_JUMP_RO; - else if (region == EC_FLASH_REGION_RW) + else if (region == EC_FLASH_REGION_ACTIVE) cmd = EC_REBOOT_JUMP_RW; else return CMD_RET_USAGE; diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c index a92806c46c..07e662a51b 100644 --- a/drivers/misc/cros_ec.c +++ b/drivers/misc/cros_ec.c @@ -473,7 +473,7 @@ int cros_ec_read_hash(struct udevice *dev, struct ec_response_vboot_hash *hash) p.cmd = EC_VBOOT_HASH_START; p.hash_type = EC_VBOOT_HASH_TYPE_SHA256; p.nonce_size = 0; - p.offset = EC_VBOOT_HASH_OFFSET_RW; + p.offset = EC_VBOOT_HASH_OFFSET_ACTIVE; if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p), hash, sizeof(*hash)) < 0) @@ -894,7 +894,8 @@ int cros_ec_flash_update_rw(struct udevice *dev, const uint8_t *image, uint32_t rw_offset, rw_size; int ret; - if (cros_ec_flash_offset(dev, EC_FLASH_REGION_RW, &rw_offset, &rw_size)) + if (cros_ec_flash_offset(dev, EC_FLASH_REGION_ACTIVE, &rw_offset, + &rw_size)) return -1; if (image_size > (int)rw_size) return -1; @@ -1045,7 +1046,7 @@ int cros_ec_decode_ec_flash(struct udevice *dev, struct fdt_cros_ec *config) if (0 == strcmp(name, "ro")) { region = EC_FLASH_REGION_RO; } else if (0 == strcmp(name, "rw")) { - region = EC_FLASH_REGION_RW; + region = EC_FLASH_REGION_ACTIVE; } else if (0 == strcmp(name, "wp-ro")) { region = EC_FLASH_REGION_WP_RO; } else { diff --git a/drivers/misc/cros_ec_sandbox.c b/drivers/misc/cros_ec_sandbox.c index dedad9b857..d741554d8a 100644 --- a/drivers/misc/cros_ec_sandbox.c +++ b/drivers/misc/cros_ec_sandbox.c @@ -365,7 +365,7 @@ static int process_cmd(struct ec_state *ec, struct fmap_entry *entry; int ret, size; - entry = &ec->ec_config.region[EC_FLASH_REGION_RW]; + entry = &ec->ec_config.region[EC_FLASH_REGION_ACTIVE]; switch (req->cmd) { case EC_VBOOT_HASH_RECALC: @@ -420,7 +420,7 @@ static int process_cmd(struct ec_state *ec, switch (req->region) { case EC_FLASH_REGION_RO: - case EC_FLASH_REGION_RW: + case EC_FLASH_REGION_ACTIVE: case EC_FLASH_REGION_WP_RO: entry = &ec->ec_config.region[req->region]; resp->offset = entry->offset; diff --git a/include/ec_commands.h b/include/ec_commands.h index 7605066437..392c1f1a43 100644 --- a/include/ec_commands.h +++ b/include/ec_commands.h @@ -1,4 +1,4 @@ -/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved. +/* Copyright (c) 2018 The Chromium OS Authors. All rights reserved. * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -27,7 +27,13 @@ * On I2C, all bytes are sent serially in the same message. */ -/* Current version of this protocol */ +/* + * Current version of this protocol + * + * TODO(crosbug.com/p/11223): This is effectively useless; protocol is + * determined in other ways. Remove this once the kernel code no longer + * depends on it. + */ #define EC_PROTO_VERSION 0x00000002 /* Command version mask */ @@ -70,18 +76,22 @@ #define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */ /* The offset address of each type of data in mapped memory. */ -#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors */ -#define EC_MEMMAP_FAN 0x10 /* Fan speeds */ -#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* Temp sensors (second set) */ -#define EC_MEMMAP_ID 0x20 /* 'E' 'C' */ +#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors 0x00 - 0x0f */ +#define EC_MEMMAP_FAN 0x10 /* Fan speeds 0x10 - 0x17 */ +#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* More temp sensors 0x18 - 0x1f */ +#define EC_MEMMAP_ID 0x20 /* 0x20 == 'E', 0x21 == 'C' */ #define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */ #define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */ #define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */ #define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */ #define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */ -#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host command interface flags */ -#define EC_MEMMAP_SWITCHES 0x30 -#define EC_MEMMAP_HOST_EVENTS 0x34 +#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host cmd interface flags (8 bits) */ +/* Unused 0x28 - 0x2f */ +#define EC_MEMMAP_SWITCHES 0x30 /* 8 bits */ +/* Unused 0x31 - 0x33 */ +#define EC_MEMMAP_HOST_EVENTS 0x34 /* 32 bits */ +/* Reserve 0x38 - 0x3f for additional host event-related stuff */ +/* Battery values are all 32 bits */ #define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */ #define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */ #define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */ @@ -90,10 +100,33 @@ #define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */ #define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */ #define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */ +/* Strings are all 8 bytes (EC_MEMMAP_TEXT_MAX) */ #define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */ #define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */ #define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */ #define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */ +#define EC_MEMMAP_ALS 0x80 /* ALS readings in lux (2 X 16 bits) */ +/* Unused 0x84 - 0x8f */ +#define EC_MEMMAP_ACC_STATUS 0x90 /* Accelerometer status (8 bits )*/ +/* Unused 0x91 */ +#define EC_MEMMAP_ACC_DATA 0x92 /* Accelerometers data 0x92 - 0x9f */ +/* 0x92: Lid Angle if available, LID_ANGLE_UNRELIABLE otherwise */ +/* 0x94 - 0x99: 1st Accelerometer */ +/* 0x9a - 0x9f: 2nd Accelerometer */ +#define EC_MEMMAP_GYRO_DATA 0xa0 /* Gyroscope data 0xa0 - 0xa5 */ +/* Unused 0xa6 - 0xdf */ + +/* + * ACPI is unable to access memory mapped data at or above this offset due to + * limitations of the ACPI protocol. Do not place data in the range 0xe0 - 0xfe + * which might be needed by ACPI. + */ +#define EC_MEMMAP_NO_ACPI 0xe0 + +/* Define the format of the accelerometer mapped memory status byte. */ +#define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK 0x0f +#define EC_MEMMAP_ACC_STATUS_BUSY_BIT (1 << 4) +#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT (1 << 7) /* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */ #define EC_TEMP_SENSOR_ENTRIES 16 @@ -103,6 +136,8 @@ * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2. */ #define EC_TEMP_SENSOR_B_ENTRIES 8 + +/* Special values for mapped temperature sensors */ #define EC_TEMP_SENSOR_NOT_PRESENT 0xff #define EC_TEMP_SENSOR_ERROR 0xfe #define EC_TEMP_SENSOR_NOT_POWERED 0xfd @@ -113,6 +148,18 @@ */ #define EC_TEMP_SENSOR_OFFSET 200 +/* + * Number of ALS readings at EC_MEMMAP_ALS + */ +#define EC_ALS_ENTRIES 2 + +/* + * The default value a temperature sensor will return when it is present but + * has not been read this boot. This is a reasonable number to avoid + * triggering alarms on the host. + */ +#define EC_TEMP_SENSOR_DEFAULT (296 - EC_TEMP_SENSOR_OFFSET) + #define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */ #define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */ #define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */ @@ -142,9 +189,158 @@ #define EC_HOST_CMD_FLAG_VERSION_3 0x02 /* Wireless switch flags */ -#define EC_WIRELESS_SWITCH_WLAN 0x01 -#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 -#define EC_WIRELESS_SWITCH_WWAN 0x04 +#define EC_WIRELESS_SWITCH_ALL ~0x00 /* All flags */ +#define EC_WIRELESS_SWITCH_WLAN 0x01 /* WLAN radio */ +#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 /* Bluetooth radio */ +#define EC_WIRELESS_SWITCH_WWAN 0x04 /* WWAN power */ +#define EC_WIRELESS_SWITCH_WLAN_POWER 0x08 /* WLAN power */ + +/*****************************************************************************/ +/* + * ACPI commands + * + * These are valid ONLY on the ACPI command/data port. + */ + +/* + * ACPI Read Embedded Controller + * + * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). + * + * Use the following sequence: + * + * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write address to EC_LPC_ADDR_ACPI_DATA + * - Wait for EC_LPC_CMDR_DATA bit to set + * - Read value from EC_LPC_ADDR_ACPI_DATA + */ +#define EC_CMD_ACPI_READ 0x0080 + +/* + * ACPI Write Embedded Controller + * + * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). + * + * Use the following sequence: + * + * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write address to EC_LPC_ADDR_ACPI_DATA + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write value to EC_LPC_ADDR_ACPI_DATA + */ +#define EC_CMD_ACPI_WRITE 0x0081 + +/* + * ACPI Burst Enable Embedded Controller + * + * This enables burst mode on the EC to allow the host to issue several + * commands back-to-back. While in this mode, writes to mapped multi-byte + * data are locked out to ensure data consistency. + */ +#define EC_CMD_ACPI_BURST_ENABLE 0x0082 + +/* + * ACPI Burst Disable Embedded Controller + * + * This disables burst mode on the EC and stops preventing EC writes to mapped + * multi-byte data. + */ +#define EC_CMD_ACPI_BURST_DISABLE 0x0083 + +/* + * ACPI Query Embedded Controller + * + * This clears the lowest-order bit in the currently pending host events, and + * sets the result code to the 1-based index of the bit (event 0x00000001 = 1, + * event 0x80000000 = 32), or 0 if no event was pending. + */ +#define EC_CMD_ACPI_QUERY_EVENT 0x0084 + +/* Valid addresses in ACPI memory space, for read/write commands */ + +/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */ +#define EC_ACPI_MEM_VERSION 0x00 +/* + * Test location; writing value here updates test compliment byte to (0xff - + * value). + */ +#define EC_ACPI_MEM_TEST 0x01 +/* Test compliment; writes here are ignored. */ +#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02 + +/* Keyboard backlight brightness percent (0 - 100) */ +#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03 +/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */ +#define EC_ACPI_MEM_FAN_DUTY 0x04 + +/* + * DPTF temp thresholds. Any of the EC's temp sensors can have up to two + * independent thresholds attached to them. The current value of the ID + * register determines which sensor is affected by the THRESHOLD and COMMIT + * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme + * as the memory-mapped sensors. The COMMIT register applies those settings. + * + * The spec does not mandate any way to read back the threshold settings + * themselves, but when a threshold is crossed the AP needs a way to determine + * which sensor(s) are responsible. Each reading of the ID register clears and + * returns one sensor ID that has crossed one of its threshold (in either + * direction) since the last read. A value of 0xFF means "no new thresholds + * have tripped". Setting or enabling the thresholds for a sensor will clear + * the unread event count for that sensor. + */ +#define EC_ACPI_MEM_TEMP_ID 0x05 +#define EC_ACPI_MEM_TEMP_THRESHOLD 0x06 +#define EC_ACPI_MEM_TEMP_COMMIT 0x07 +/* + * Here are the bits for the COMMIT register: + * bit 0 selects the threshold index for the chosen sensor (0/1) + * bit 1 enables/disables the selected threshold (0 = off, 1 = on) + * Each write to the commit register affects one threshold. + */ +#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK (1 << 0) +#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK (1 << 1) +/* + * Example: + * + * Set the thresholds for sensor 2 to 50 C and 60 C: + * write 2 to [0x05] -- select temp sensor 2 + * write 0x7b to [0x06] -- C_TO_K(50) - EC_TEMP_SENSOR_OFFSET + * write 0x2 to [0x07] -- enable threshold 0 with this value + * write 0x85 to [0x06] -- C_TO_K(60) - EC_TEMP_SENSOR_OFFSET + * write 0x3 to [0x07] -- enable threshold 1 with this value + * + * Disable the 60 C threshold, leaving the 50 C threshold unchanged: + * write 2 to [0x05] -- select temp sensor 2 + * write 0x1 to [0x07] -- disable threshold 1 + */ + +/* DPTF battery charging current limit */ +#define EC_ACPI_MEM_CHARGING_LIMIT 0x08 + +/* Charging limit is specified in 64 mA steps */ +#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA 64 +/* Value to disable DPTF battery charging limit */ +#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED 0xff + +/* + * Report device orientation + * bit 0 device is tablet mode + */ +#define EC_ACPI_MEM_DEVICE_ORIENTATION 0x09 +#define EC_ACPI_MEM_DEVICE_TABLET_MODE 0x01 + +/* + * ACPI addresses 0x20 - 0xff map to EC_MEMMAP offset 0x00 - 0xdf. This data + * is read-only from the AP. Added in EC_ACPI_MEM_VERSION 2. + */ +#define EC_ACPI_MEM_MAPPED_BEGIN 0x20 +#define EC_ACPI_MEM_MAPPED_SIZE 0xe0 + +/* Current version of ACPI memory address space */ +#define EC_ACPI_MEM_VERSION_CURRENT 2 + /* * This header file is used in coreboot both in C and ACPI code. The ACPI code @@ -161,6 +357,92 @@ #define __packed __attribute__((packed)) #endif +#ifndef __aligned +#define __aligned(x) __attribute__((aligned(x))) +#endif + +/* + * Attributes for EC request and response packets. Just defining __packed + * results in inefficient assembly code on ARM, if the structure is actually + * 32-bit aligned, as it should be for all buffers. + * + * Be very careful when adding these to existing structures. They will round + * up the structure size to the specified boundary. + * + * Also be very careful to make that if a structure is included in some other + * parent structure that the alignment will still be true given the packing of + * the parent structure. This is particularly important if the sub-structure + * will be passed as a pointer to another function, since that function will + * not know about the misaligment caused by the parent structure's packing. + * + * Also be very careful using __packed - particularly when nesting non-packed + * structures inside packed ones. In fact, DO NOT use __packed directly; + * always use one of these attributes. + * + * Once everything is annotated properly, the following search strings should + * not return ANY matches in this file other than right here: + * + * "__packed" - generates inefficient code; all sub-structs must also be packed + * + * "struct [^_]" - all structs should be annotated, except for structs that are + * members of other structs/unions (and their original declarations should be + * annotated). + */ +#ifdef CONFIG_HOSTCMD_ALIGNED + +/* + * Packed structures where offset and size are always aligned to 1, 2, or 4 + * byte boundary. + */ +#define __ec_align1 __packed +#define __ec_align2 __packed __aligned(2) +#define __ec_align4 __packed __aligned(4) + +/* + * Packed structure which must be under-aligned, because its size is not a + * 4-byte multiple. This is sub-optimal because it forces byte-wise access + * of all multi-byte fields in it, even though they are themselves aligned. + * + * In theory, we could duplicate the structure with __aligned(4) for accessing + * its members, but use the __packed version for sizeof(). + */ +#define __ec_align_size1 __packed + +/* + * Packed structure which must be under-aligned, because its offset inside a + * parent structure is not a 4-byte multiple. + */ +#define __ec_align_offset1 __packed +#define __ec_align_offset2 __packed __aligned(2) + +/* + * Structures which are complicated enough that I'm skipping them on the first + * pass. They are effectively unchanged from their previous definitions. + * + * TODO(rspangler): Figure out what to do with these. It's likely necessary + * to work out the size and offset of each member and add explicit padding to + * maintain those. + */ +#define __ec_todo_packed __packed +#define __ec_todo_unpacked + +#else /* !CONFIG_HOSTCMD_ALIGNED */ + +/* + * Packed structures make no assumption about alignment, so they do inefficient + * byte-wise reads. + */ +#define __ec_align1 __packed +#define __ec_align2 __packed +#define __ec_align4 __packed +#define __ec_align_size1 __packed +#define __ec_align_offset1 __packed +#define __ec_align_offset2 __packed +#define __ec_todo_packed __packed +#define __ec_todo_unpacked + +#endif /* !CONFIG_HOSTCMD_ALIGNED */ + /* LPC command status byte masks */ /* EC has written a byte in the data register and host hasn't read it yet */ #define EC_LPC_STATUS_TO_HOST 0x01 @@ -170,7 +452,7 @@ #define EC_LPC_STATUS_PROCESSING 0x04 /* Last write to EC was a command, not data */ #define EC_LPC_STATUS_LAST_CMD 0x08 -/* EC is in burst mode. Unsupported by Chrome EC, so this bit is never set */ +/* EC is in burst mode */ #define EC_LPC_STATUS_BURST_MODE 0x10 /* SCI event is pending (requesting SCI query) */ #define EC_LPC_STATUS_SCI_PENDING 0x20 @@ -186,7 +468,9 @@ #define EC_LPC_STATUS_BUSY_MASK \ (EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING) -/* Host command response codes */ +/* Host command response codes (16-bit). Note that response codes should be + * stored in a uint16_t rather than directly in a value of this type. + */ enum ec_status { EC_RES_SUCCESS = 0, EC_RES_INVALID_COMMAND = 1, @@ -202,7 +486,9 @@ enum ec_status { EC_RES_OVERFLOW = 11, /* Table / data overflow */ EC_RES_INVALID_HEADER = 12, /* Header contains invalid data */ EC_RES_REQUEST_TRUNCATED = 13, /* Didn't get the entire request */ - EC_RES_RESPONSE_TOO_BIG = 14 /* Response was too big to handle */ + EC_RES_RESPONSE_TOO_BIG = 14, /* Response was too big to handle */ + EC_RES_BUS_ERROR = 15, /* Communications bus error */ + EC_RES_BUSY = 16 /* Up but too busy. Should retry */ }; /* @@ -222,7 +508,8 @@ enum host_event_code { EC_HOST_EVENT_BATTERY_CRITICAL = 7, EC_HOST_EVENT_BATTERY = 8, EC_HOST_EVENT_THERMAL_THRESHOLD = 9, - EC_HOST_EVENT_THERMAL_OVERLOAD = 10, + /* Event generated by a device attached to the EC */ + EC_HOST_EVENT_DEVICE = 10, EC_HOST_EVENT_THERMAL = 11, EC_HOST_EVENT_USB_CHARGER = 12, EC_HOST_EVENT_KEY_PRESSED = 13, @@ -240,6 +527,49 @@ enum host_event_code { /* Shutdown due to battery level too low */ EC_HOST_EVENT_BATTERY_SHUTDOWN = 17, + /* Suggest that the AP throttle itself */ + EC_HOST_EVENT_THROTTLE_START = 18, + /* Suggest that the AP resume normal speed */ + EC_HOST_EVENT_THROTTLE_STOP = 19, + + /* Hang detect logic detected a hang and host event timeout expired */ + EC_HOST_EVENT_HANG_DETECT = 20, + /* Hang detect logic detected a hang and warm rebooted the AP */ + EC_HOST_EVENT_HANG_REBOOT = 21, + + /* PD MCU triggering host event */ + EC_HOST_EVENT_PD_MCU = 22, + + /* Battery Status flags have changed */ + EC_HOST_EVENT_BATTERY_STATUS = 23, + + /* EC encountered a panic, triggering a reset */ + EC_HOST_EVENT_PANIC = 24, + + /* Keyboard fastboot combo has been pressed */ + EC_HOST_EVENT_KEYBOARD_FASTBOOT = 25, + + /* EC RTC event occurred */ + EC_HOST_EVENT_RTC = 26, + + /* Emulate MKBP event */ + EC_HOST_EVENT_MKBP = 27, + + /* EC desires to change state of host-controlled USB mux */ + EC_HOST_EVENT_USB_MUX = 28, + + /* TABLET/LAPTOP mode event*/ + EC_HOST_EVENT_MODE_CHANGE = 29, + + /* Keyboard recovery combo with hardware reinitialization */ + EC_HOST_EVENT_KEYBOARD_RECOVERY_HW_REINIT = 30, + + /* + * Reserve this last bit to indicate that at least one bit in a + * secondary host event word is set. See crbug.com/633646. + */ + EC_HOST_EVENT_EXTENDED = 31, + /* * The high bit of the event mask is not used as a host event code. If * it reads back as set, then the entire event mask should be @@ -250,10 +580,10 @@ enum host_event_code { EC_HOST_EVENT_INVALID = 32 }; /* Host event mask */ -#define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1)) +#define EC_HOST_EVENT_MASK(event_code) (1ULL << ((event_code) - 1)) /* Arguments at EC_LPC_ADDR_HOST_ARGS */ -struct ec_lpc_host_args { +struct __ec_align4 ec_lpc_host_args { uint8_t flags; uint8_t command_version; uint8_t data_size; @@ -262,7 +592,7 @@ struct ec_lpc_host_args { * all params/response data bytes. */ uint8_t checksum; -} __packed; +}; /* Flags for ec_lpc_host_args.flags */ /* @@ -272,7 +602,7 @@ struct ec_lpc_host_args { * If EC gets a command and this flag is not set, this is an old-style command. * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with * unknown length. EC must respond with an old-style response (that is, - * withouth setting EC_HOST_ARGS_FLAG_TO_HOST). + * without setting EC_HOST_ARGS_FLAG_TO_HOST). */ #define EC_HOST_ARGS_FLAG_FROM_HOST 0x01 /* @@ -284,6 +614,89 @@ struct ec_lpc_host_args { */ #define EC_HOST_ARGS_FLAG_TO_HOST 0x02 +/*****************************************************************************/ +/* + * Byte codes returned by EC over SPI interface. + * + * These can be used by the AP to debug the EC interface, and to determine + * when the EC is not in a state where it will ever get around to responding + * to the AP. + * + * Example of sequence of bytes read from EC for a current good transfer: + * 1. - - AP asserts chip select (CS#) + * 2. EC_SPI_OLD_READY - AP sends first byte(s) of request + * 3. - - EC starts handling CS# interrupt + * 4. EC_SPI_RECEIVING - AP sends remaining byte(s) of request + * 5. EC_SPI_PROCESSING - EC starts processing request; AP is clocking in + * bytes looking for EC_SPI_FRAME_START + * 6. - - EC finishes processing and sets up response + * 7. EC_SPI_FRAME_START - AP reads frame byte + * 8. (response packet) - AP reads response packet + * 9. EC_SPI_PAST_END - Any additional bytes read by AP + * 10 - - AP deasserts chip select + * 11 - - EC processes CS# interrupt and sets up DMA for + * next request + * + * If the AP is waiting for EC_SPI_FRAME_START and sees any value other than + * the following byte values: + * EC_SPI_OLD_READY + * EC_SPI_RX_READY + * EC_SPI_RECEIVING + * EC_SPI_PROCESSING + * + * Then the EC found an error in the request, or was not ready for the request + * and lost data. The AP should give up waiting for EC_SPI_FRAME_START, + * because the EC is unable to tell when the AP is done sending its request. + */ + +/* + * Framing byte which precedes a response packet from the EC. After sending a + * request, the AP will clock in bytes until it sees the framing byte, then + * clock in the response packet. + */ +#define EC_SPI_FRAME_START 0xec + +/* + * Padding bytes which are clocked out after the end of a response packet. + */ +#define EC_SPI_PAST_END 0xed + +/* + * EC is ready to receive, and has ignored the byte sent by the AP. EC expects + * that the AP will send a valid packet header (starting with + * EC_COMMAND_PROTOCOL_3) in the next 32 bytes. + */ +#define EC_SPI_RX_READY 0xf8 + +/* + * EC has started receiving the request from the AP, but hasn't started + * processing it yet. + */ +#define EC_SPI_RECEIVING 0xf9 + +/* EC has received the entire request from the AP and is processing it. */ +#define EC_SPI_PROCESSING 0xfa + +/* + * EC received bad data from the AP, such as a packet header with an invalid + * length. EC will ignore all data until chip select deasserts. + */ +#define EC_SPI_RX_BAD_DATA 0xfb + +/* + * EC received data from the AP before it was ready. That is, the AP asserted + * chip select and started clocking data before the EC was ready to receive it. + * EC will ignore all data until chip select deasserts. + */ +#define EC_SPI_NOT_READY 0xfc + +/* + * EC was ready to receive a request from the AP. EC has treated the byte sent + * by the AP as part of a request packet, or (for old-style ECs) is processing + * a fully received packet but is not ready to respond yet. + */ +#define EC_SPI_OLD_READY 0xfd + /*****************************************************************************/ /* @@ -332,8 +745,8 @@ struct ec_lpc_host_args { #define EC_HOST_REQUEST_VERSION 3 /* Version 3 request from host */ -struct ec_host_request { - /* Struct version (=3) +struct __ec_align4 ec_host_request { + /* Structure version (=3) * * EC will return EC_RES_INVALID_HEADER if it receives a header with a * version it doesn't know how to parse. @@ -357,13 +770,13 @@ struct ec_host_request { /* Length of data which follows this header */ uint16_t data_len; -} __packed; +}; #define EC_HOST_RESPONSE_VERSION 3 /* Version 3 response from EC */ -struct ec_host_response { - /* Struct version (=3) */ +struct __ec_align4 ec_host_response { + /* Structure version (=3) */ uint8_t struct_version; /* @@ -380,18 +793,21 @@ struct ec_host_response { /* Unused bytes in current protocol version; set to 0 */ uint16_t reserved; -} __packed; +}; /*****************************************************************************/ /* * Notes on commands: * - * Each command is an 8-byte command value. Commands which take params or - * return response data specify structs for that data. If no struct is + * Each command is an 16-bit command value. Commands which take params or + * return response data specify structures for that data. If no structure is * specified, the command does not input or output data, respectively. * Parameter/response length is implicit in the structs. Some underlying * communication protocols (I2C, SPI) may add length or checksum headers, but * those are implementation-dependent and not defined here. + * + * All commands MUST be #defined to be 4-digit UPPER CASE hex values + * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work. */ /*****************************************************************************/ @@ -401,28 +817,28 @@ struct ec_host_response { * Get protocol version, used to deal with non-backward compatible protocol * changes. */ -#define EC_CMD_PROTO_VERSION 0x00 +#define EC_CMD_PROTO_VERSION 0x0000 -struct ec_response_proto_version { +struct __ec_align4 ec_response_proto_version { uint32_t version; -} __packed; +}; /* * Hello. This is a simple command to test the EC is responsive to * commands. */ -#define EC_CMD_HELLO 0x01 +#define EC_CMD_HELLO 0x0001 -struct ec_params_hello { +struct __ec_align4 ec_params_hello { uint32_t in_data; /* Pass anything here */ -} __packed; +}; -struct ec_response_hello { +struct __ec_align4 ec_response_hello { uint32_t out_data; /* Output will be in_data + 0x01020304 */ -} __packed; +}; /* Get version number */ -#define EC_CMD_GET_VERSION 0x02 +#define EC_CMD_GET_VERSION 0x0002 enum ec_current_image { EC_IMAGE_UNKNOWN = 0, @@ -430,49 +846,49 @@ enum ec_current_image { EC_IMAGE_RW }; -struct ec_response_get_version { +struct __ec_align4 ec_response_get_version { /* Null-terminated version strings for RO, RW */ char version_string_ro[32]; char version_string_rw[32]; char reserved[32]; /* Was previously RW-B string */ uint32_t current_image; /* One of ec_current_image */ -} __packed; +}; /* Read test */ -#define EC_CMD_READ_TEST 0x03 +#define EC_CMD_READ_TEST 0x0003 -struct ec_params_read_test { +struct __ec_align4 ec_params_read_test { uint32_t offset; /* Starting value for read buffer */ uint32_t size; /* Size to read in bytes */ -} __packed; +}; -struct ec_response_read_test { +struct __ec_align4 ec_response_read_test { uint32_t data[32]; -} __packed; +}; /* * Get build information * * Response is null-terminated string. */ -#define EC_CMD_GET_BUILD_INFO 0x04 +#define EC_CMD_GET_BUILD_INFO 0x0004 /* Get chip info */ -#define EC_CMD_GET_CHIP_INFO 0x05 +#define EC_CMD_GET_CHIP_INFO 0x0005 -struct ec_response_get_chip_info { +struct __ec_align4 ec_response_get_chip_info { /* Null-terminated strings */ char vendor[32]; char name[32]; char revision[32]; /* Mask version */ -} __packed; +}; /* Get board HW version */ -#define EC_CMD_GET_BOARD_VERSION 0x06 +#define EC_CMD_GET_BOARD_VERSION 0x0006 -struct ec_response_board_version { +struct __ec_align2 ec_response_board_version { uint16_t board_version; /* A monotonously incrementing number. */ -} __packed; +}; /* * Read memory-mapped data. @@ -482,72 +898,73 @@ struct ec_response_board_version { * * Response is params.size bytes of data. */ -#define EC_CMD_READ_MEMMAP 0x07 +#define EC_CMD_READ_MEMMAP 0x0007 -struct ec_params_read_memmap { +struct __ec_align1 ec_params_read_memmap { uint8_t offset; /* Offset in memmap (EC_MEMMAP_*) */ uint8_t size; /* Size to read in bytes */ -} __packed; +}; /* Read versions supported for a command */ -#define EC_CMD_GET_CMD_VERSIONS 0x08 +#define EC_CMD_GET_CMD_VERSIONS 0x0008 -struct ec_params_get_cmd_versions { +struct __ec_align1 ec_params_get_cmd_versions { uint8_t cmd; /* Command to check */ -} __packed; +}; + +struct __ec_align2 ec_params_get_cmd_versions_v1 { + uint16_t cmd; /* Command to check */ +}; -struct ec_response_get_cmd_versions { +struct __ec_align4 ec_response_get_cmd_versions { /* * Mask of supported versions; use EC_VER_MASK() to compare with a * desired version. */ uint32_t version_mask; -} __packed; +}; /* - * Check EC communcations status (busy). This is needed on i2c/spi but not + * Check EC communications status (busy). This is needed on i2c/spi but not * on lpc since it has its own out-of-band busy indicator. * * lpc must read the status from the command register. Attempting this on * lpc will overwrite the args/parameter space and corrupt its data. */ -#define EC_CMD_GET_COMMS_STATUS 0x09 +#define EC_CMD_GET_COMMS_STATUS 0x0009 /* Avoid using ec_status which is for return values */ enum ec_comms_status { EC_COMMS_STATUS_PROCESSING = 1 << 0, /* Processing cmd */ }; -struct ec_response_get_comms_status { +struct __ec_align4 ec_response_get_comms_status { uint32_t flags; /* Mask of enum ec_comms_status */ -} __packed; +}; -/* - * Fake a variety of responses, purely for testing purposes. - * FIXME: Would be nice to force checksum errors. - */ -#define EC_CMD_TEST_PROTOCOL 0x0a +/* Fake a variety of responses, purely for testing purposes. */ +#define EC_CMD_TEST_PROTOCOL 0x000A /* Tell the EC what to send back to us. */ -struct ec_params_test_protocol { +struct __ec_align4 ec_params_test_protocol { uint32_t ec_result; uint32_t ret_len; uint8_t buf[32]; -} __packed; +}; /* Here it comes... */ -struct ec_response_test_protocol { +struct __ec_align4 ec_response_test_protocol { uint8_t buf[32]; -} __packed; +}; -/* Get prococol information */ -#define EC_CMD_GET_PROTOCOL_INFO 0x0b +/* Get protocol information */ +#define EC_CMD_GET_PROTOCOL_INFO 0x000B /* Flags for ec_response_get_protocol_info.flags */ /* EC_RES_IN_PROGRESS may be returned if a command is slow */ #define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0) -struct ec_response_get_protocol_info { +struct __ec_align4 ec_response_get_protocol_info { /* Fields which exist if at least protocol version 3 supported */ /* Bitmask of protocol versions supported (1 << n means version n)*/ @@ -561,15 +978,153 @@ struct ec_response_get_protocol_info { /* Flags; see EC_PROTOCOL_INFO_* */ uint32_t flags; -} __packed; +}; + + +/*****************************************************************************/ +/* Get/Set miscellaneous values */ + +/* The upper byte of .flags tells what to do (nothing means "get") */ +#define EC_GSV_SET 0x80000000 + +/* The lower three bytes of .flags identifies the parameter, if that has + meaning for an individual command. */ +#define EC_GSV_PARAM_MASK 0x00ffffff + +struct __ec_align4 ec_params_get_set_value { + uint32_t flags; + uint32_t value; +}; + +struct __ec_align4 ec_response_get_set_value { + uint32_t flags; + uint32_t value; +}; + +/* More than one command can use these structs to get/set parameters. */ +#define EC_CMD_GSV_PAUSE_IN_S5 0x000C + +/*****************************************************************************/ +/* List the features supported by the firmware */ +#define EC_CMD_GET_FEATURES 0x000D + +/* Supported features */ +enum ec_feature_code { + /* + * This image contains a limited set of features. Another image + * in RW partition may support more features. + */ + EC_FEATURE_LIMITED = 0, + /* + * Commands for probing/reading/writing/erasing the flash in the + * EC are present. + */ + EC_FEATURE_FLASH = 1, + /* + * Can control the fan speed directly. + */ + EC_FEATURE_PWM_FAN = 2, + /* + * Can control the intensity of the keyboard backlight. + */ + EC_FEATURE_PWM_KEYB = 3, + /* + * Support Google lightbar, introduced on Pixel. + */ + EC_FEATURE_LIGHTBAR = 4, + /* Control of LEDs */ + EC_FEATURE_LED = 5, + /* Exposes an interface to control gyro and sensors. + * The host goes through the EC to access these sensors. + * In addition, the EC may provide composite sensors, like lid angle. + */ + EC_FEATURE_MOTION_SENSE = 6, + /* The keyboard is controlled by the EC */ + EC_FEATURE_KEYB = 7, + /* The AP can use part of the EC flash as persistent storage. */ + EC_FEATURE_PSTORE = 8, + /* The EC monitors BIOS port 80h, and can return POST codes. */ + EC_FEATURE_PORT80 = 9, + /* + * Thermal management: include TMP specific commands. + * Higher level than direct fan control. + */ + EC_FEATURE_THERMAL = 10, + /* Can switch the screen backlight on/off */ + EC_FEATURE_BKLIGHT_SWITCH = 11, + /* Can switch the wifi module on/off */ + EC_FEATURE_WIFI_SWITCH = 12, + /* Monitor host events, through for example SMI or SCI */ + EC_FEATURE_HOST_EVENTS = 13, + /* The EC exposes GPIO commands to control/monitor connected devices. */ + EC_FEATURE_GPIO = 14, + /* The EC can send i2c messages to downstream devices. */ + EC_FEATURE_I2C = 15, + /* Command to control charger are included */ + EC_FEATURE_CHARGER = 16, + /* Simple battery support. */ + EC_FEATURE_BATTERY = 17, + /* + * Support Smart battery protocol + * (Common Smart Battery System Interface Specification) + */ + EC_FEATURE_SMART_BATTERY = 18, + /* EC can detect when the host hangs. */ + EC_FEATURE_HANG_DETECT = 19, + /* Report power information, for pit only */ + EC_FEATURE_PMU = 20, + /* Another Cros EC device is present downstream of this one */ + EC_FEATURE_SUB_MCU = 21, + /* Support USB Power delivery (PD) commands */ + EC_FEATURE_USB_PD = 22, + /* Control USB multiplexer, for audio through USB port for instance. */ + EC_FEATURE_USB_MUX = 23, + /* Motion Sensor code has an internal software FIFO */ + EC_FEATURE_MOTION_SENSE_FIFO = 24, + /* Support temporary secure vstore */ + EC_FEATURE_VSTORE = 25, + /* EC decides on USB-C SS mux state, muxes configured by host */ + EC_FEATURE_USBC_SS_MUX_VIRTUAL = 26, + /* EC has RTC feature that can be controlled by host commands */ + EC_FEATURE_RTC = 27, + /* The MCU exposes a Fingerprint sensor */ + EC_FEATURE_FINGERPRINT = 28, + /* The MCU exposes a Touchpad */ + EC_FEATURE_TOUCHPAD = 29, + /* The MCU has RWSIG task enabled */ + EC_FEATURE_RWSIG = 30, + /* EC has device events support */ + EC_FEATURE_DEVICE_EVENT = 31, + /* EC supports the unified wake masks for LPC/eSPI systems */ + EC_FEATURE_UNIFIED_WAKE_MASKS = 32, +}; + +#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32)) +#define EC_FEATURE_MASK_1(event_code) (1UL << (event_code - 32)) +struct __ec_align4 ec_response_get_features { + uint32_t flags[2]; +}; + +/*****************************************************************************/ +/* Get the board's SKU ID from EC */ +#define EC_CMD_GET_SKU_ID 0x000E + +/* Set SKU ID from AP */ +#define EC_CMD_SET_SKU_ID 0x000F + +struct __ec_align4 ec_sku_id_info { + uint32_t sku_id; +}; /*****************************************************************************/ /* Flash commands */ /* Get flash info */ -#define EC_CMD_FLASH_INFO 0x10 +#define EC_CMD_FLASH_INFO 0x0010 +#define EC_VER_FLASH_INFO 2 -struct ec_response_flash_info { +/* Version 0 returns these fields */ +struct __ec_align4 ec_response_flash_info { /* Usable flash size, in bytes */ uint32_t flash_size; /* @@ -587,40 +1142,157 @@ struct ec_response_flash_info { * multiple of this. */ uint32_t protect_block_size; -} __packed; +}; + +/* Flags for version 1+ flash info command */ +/* EC flash erases bits to 0 instead of 1 */ +#define EC_FLASH_INFO_ERASE_TO_0 (1 << 0) + +/* Flash must be selected for read/write/erase operations to succeed. This may + * be necessary on a chip where write/erase can be corrupted by other board + * activity, or where the chip needs to enable some sort of programming voltage, + * or where the read/write/erase operations require cleanly suspending other + * chip functionality. */ +#define EC_FLASH_INFO_SELECT_REQUIRED (1 << 1) /* - * Read flash + * Version 1 returns the same initial fields as version 0, with additional + * fields following. * - * Response is params.size bytes of data. + * gcc anonymous structs don't seem to get along with the __packed directive; + * if they did we'd define the version 0 structure as a sub-structure of this + * one. + * + * Version 2 supports flash banks of different sizes: + * The caller specified the number of banks it has preallocated + * (num_banks_desc) + * The EC returns the number of banks describing the flash memory. + * It adds banks descriptions up to num_banks_desc. */ -#define EC_CMD_FLASH_READ 0x11 +struct __ec_align4 ec_response_flash_info_1 { + /* Version 0 fields; see above for description */ + uint32_t flash_size; + uint32_t write_block_size; + uint32_t erase_block_size; + uint32_t protect_block_size; -struct ec_params_flash_read { - uint32_t offset; /* Byte offset to read */ - uint32_t size; /* Size to read in bytes */ -} __packed; + /* Version 1 adds these fields: */ + /* + * Ideal write size in bytes. Writes will be fastest if size is + * exactly this and offset is a multiple of this. For example, an EC + * may have a write buffer which can do half-page operations if data is + * aligned, and a slower word-at-a-time write mode. + */ + uint32_t write_ideal_size; -/* Write flash */ -#define EC_CMD_FLASH_WRITE 0x12 -#define EC_VER_FLASH_WRITE 1 + /* Flags; see EC_FLASH_INFO_* */ + uint32_t flags; +}; -/* Version 0 of the flash command supported only 64 bytes of data */ +struct __ec_align4 ec_params_flash_info_2 { + /* Number of banks to describe */ + uint16_t num_banks_desc; + /* Reserved; set 0; ignore on read */ + uint8_t reserved[2]; +}; + +struct ec_flash_bank { + /* Number of sector is in this bank. */ + uint16_t count; + /* Size in power of 2 of each sector (8 --> 256 bytes) */ + uint8_t size_exp; + /* Minimal write size for the sectors in this bank */ + uint8_t write_size_exp; + /* Erase size for the sectors in this bank */ + uint8_t erase_size_exp; + /* Size for write protection, usually identical to erase size. */ + uint8_t protect_size_exp; + /* Reserved; set 0; ignore on read */ + uint8_t reserved[2]; +}; + +struct __ec_align4 ec_response_flash_info_2 { + /* Total flash in the EC. */ + uint32_t flash_size; + /* Flags; see EC_FLASH_INFO_* */ + uint32_t flags; + /* Maximum size to use to send data to write to the EC. */ + uint32_t write_ideal_size; + /* Number of banks present in the EC. */ + uint16_t num_banks_total; + /* Number of banks described in banks array. */ + uint16_t num_banks_desc; + struct ec_flash_bank banks[0]; +}; + +/* + * Read flash + * + * Response is params.size bytes of data. + */ +#define EC_CMD_FLASH_READ 0x0011 + +struct __ec_align4 ec_params_flash_read { + uint32_t offset; /* Byte offset to read */ + uint32_t size; /* Size to read in bytes */ +}; + +/* Write flash */ +#define EC_CMD_FLASH_WRITE 0x0012 +#define EC_VER_FLASH_WRITE 1 + +/* Version 0 of the flash command supported only 64 bytes of data */ #define EC_FLASH_WRITE_VER0_SIZE 64 -struct ec_params_flash_write { +struct __ec_align4 ec_params_flash_write { uint32_t offset; /* Byte offset to write */ uint32_t size; /* Size to write in bytes */ /* Followed by data to write */ -} __packed; +}; /* Erase flash */ -#define EC_CMD_FLASH_ERASE 0x13 +#define EC_CMD_FLASH_ERASE 0x0013 -struct ec_params_flash_erase { +/* v0 */ +struct __ec_align4 ec_params_flash_erase { uint32_t offset; /* Byte offset to erase */ uint32_t size; /* Size to erase in bytes */ -} __packed; +}; + + +#define EC_VER_FLASH_WRITE 1 +/* v1 add async erase: + * subcommands can returns: + * EC_RES_SUCCESS : erased (see ERASE_SECTOR_ASYNC case below). + * EC_RES_INVALID_PARAM : offset/size are not aligned on a erase boundary. + * EC_RES_ERROR : other errors. + * EC_RES_BUSY : an existing erase operation is in progress. + * EC_RES_ACCESS_DENIED: Trying to erase running image. + * + * When ERASE_SECTOR_ASYNC returns EC_RES_SUCCESS, the operation is just + * properly queued. The user must call ERASE_GET_RESULT subcommand to get + * the proper result. + * When ERASE_GET_RESULT returns EC_RES_BUSY, the caller must wait and send + * ERASE_GET_RESULT again to get the result of ERASE_SECTOR_ASYNC. + * ERASE_GET_RESULT command may timeout on EC where flash access is not + * permitted while erasing. (For instance, STM32F4). + */ +enum ec_flash_erase_cmd { + FLASH_ERASE_SECTOR, /* Erase and wait for result */ + FLASH_ERASE_SECTOR_ASYNC, /* Erase and return immediately. */ + FLASH_ERASE_GET_RESULT, /* Ask for last erase result */ +}; + +struct __ec_align4 ec_params_flash_erase_v1 { + /* One of ec_flash_erase_cmd. */ + uint8_t cmd; + /* Pad byte; currently always contains 0 */ + uint8_t reserved; + /* No flags defined yet; set to 0 */ + uint16_t flag; + /* Same as v0 parameters. */ + struct ec_params_flash_erase params; +}; /* * Get/set flash protection. @@ -632,7 +1304,7 @@ struct ec_params_flash_erase { * * If mask=0, simply returns the current flags state. */ -#define EC_CMD_FLASH_PROTECT 0x15 +#define EC_CMD_FLASH_PROTECT 0x0015 #define EC_VER_FLASH_PROTECT 1 /* Command version 1 */ /* Flags for flash protection */ @@ -655,15 +1327,23 @@ struct ec_params_flash_erase { * re-requesting the desired flags, or by a hard reset if that fails. */ #define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5) -/* Entile flash code protected when the EC boots */ +/* Entire flash code protected when the EC boots */ #define EC_FLASH_PROTECT_ALL_AT_BOOT (1 << 6) - -struct ec_params_flash_protect { +/* RW flash code protected when the EC boots */ +#define EC_FLASH_PROTECT_RW_AT_BOOT (1 << 7) +/* RW flash code protected now. */ +#define EC_FLASH_PROTECT_RW_NOW (1 << 8) +/* Rollback information flash region protected when the EC boots */ +#define EC_FLASH_PROTECT_ROLLBACK_AT_BOOT (1 << 9) +/* Rollback information flash region protected now */ +#define EC_FLASH_PROTECT_ROLLBACK_NOW (1 << 10) + +struct __ec_align4 ec_params_flash_protect { uint32_t mask; /* Bits in flags to apply */ uint32_t flags; /* New flags to apply */ -} __packed; +}; -struct ec_response_flash_protect { +struct __ec_align4 ec_response_flash_protect { /* Current value of flash protect flags */ uint32_t flags; /* @@ -674,7 +1354,7 @@ struct ec_response_flash_protect { uint32_t valid_flags; /* Flags which can be changed given the current protection state */ uint32_t writable_flags; -} __packed; +}; /* * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash @@ -682,89 +1362,166 @@ struct ec_response_flash_protect { */ /* Get the region offset/size */ -#define EC_CMD_FLASH_REGION_INFO 0x16 +#define EC_CMD_FLASH_REGION_INFO 0x0016 #define EC_VER_FLASH_REGION_INFO 1 enum ec_flash_region { /* Region which holds read-only EC image */ EC_FLASH_REGION_RO = 0, - /* Region which holds rewritable EC image */ - EC_FLASH_REGION_RW, + /* Region which holds active rewritable EC image */ + EC_FLASH_REGION_ACTIVE, /* * Region which should be write-protected in the factory (a superset of * EC_FLASH_REGION_RO) */ EC_FLASH_REGION_WP_RO, + /* Region which holds updatable image */ + EC_FLASH_REGION_UPDATE, /* Number of regions */ EC_FLASH_REGION_COUNT, }; -struct ec_params_flash_region_info { +struct __ec_align4 ec_params_flash_region_info { uint32_t region; /* enum ec_flash_region */ -} __packed; +}; -struct ec_response_flash_region_info { +struct __ec_align4 ec_response_flash_region_info { uint32_t offset; uint32_t size; -} __packed; +}; /* Read/write VbNvContext */ -#define EC_CMD_VBNV_CONTEXT 0x17 +#define EC_CMD_VBNV_CONTEXT 0x0017 #define EC_VER_VBNV_CONTEXT 1 #define EC_VBNV_BLOCK_SIZE 16 +#define EC_VBNV_BLOCK_SIZE_V2 64 enum ec_vbnvcontext_op { EC_VBNV_CONTEXT_OP_READ, EC_VBNV_CONTEXT_OP_WRITE, }; -struct ec_params_vbnvcontext { +struct __ec_align4 ec_params_vbnvcontext { uint32_t op; - uint8_t block[EC_VBNV_BLOCK_SIZE]; -} __packed; + uint8_t block[EC_VBNV_BLOCK_SIZE_V2]; +}; + +struct __ec_align4 ec_response_vbnvcontext { + uint8_t block[EC_VBNV_BLOCK_SIZE_V2]; +}; + + +/* Get SPI flash information */ +#define EC_CMD_FLASH_SPI_INFO 0x0018 + +struct __ec_align1 ec_response_flash_spi_info { + /* JEDEC info from command 0x9F (manufacturer, memory type, size) */ + uint8_t jedec[3]; + + /* Pad byte; currently always contains 0 */ + uint8_t reserved0; + + /* Manufacturer / device ID from command 0x90 */ + uint8_t mfr_dev_id[2]; + + /* Status registers from command 0x05 and 0x35 */ + uint8_t sr1, sr2; +}; + -struct ec_response_vbnvcontext { - uint8_t block[EC_VBNV_BLOCK_SIZE]; -} __packed; +/* Select flash during flash operations */ +#define EC_CMD_FLASH_SELECT 0x0019 + +struct __ec_align4 ec_params_flash_select { + /* 1 to select flash, 0 to deselect flash */ + uint8_t select; +}; /*****************************************************************************/ /* PWM commands */ /* Get fan target RPM */ -#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20 +#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x0020 -struct ec_response_pwm_get_fan_rpm { +struct __ec_align4 ec_response_pwm_get_fan_rpm { uint32_t rpm; -} __packed; +}; /* Set target fan RPM */ -#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21 +#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x0021 + +/* Version 0 of input params */ +struct __ec_align4 ec_params_pwm_set_fan_target_rpm_v0 { + uint32_t rpm; +}; -struct ec_params_pwm_set_fan_target_rpm { +/* Version 1 of input params */ +struct __ec_align_size1 ec_params_pwm_set_fan_target_rpm_v1 { uint32_t rpm; -} __packed; + uint8_t fan_idx; +}; /* Get keyboard backlight */ -#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22 +/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */ +#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x0022 -struct ec_response_pwm_get_keyboard_backlight { +struct __ec_align1 ec_response_pwm_get_keyboard_backlight { uint8_t percent; uint8_t enabled; -} __packed; +}; /* Set keyboard backlight */ -#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23 +/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */ +#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x0023 -struct ec_params_pwm_set_keyboard_backlight { +struct __ec_align1 ec_params_pwm_set_keyboard_backlight { uint8_t percent; -} __packed; +}; /* Set target fan PWM duty cycle */ -#define EC_CMD_PWM_SET_FAN_DUTY 0x24 +#define EC_CMD_PWM_SET_FAN_DUTY 0x0024 + +/* Version 0 of input params */ +struct __ec_align4 ec_params_pwm_set_fan_duty_v0 { + uint32_t percent; +}; -struct ec_params_pwm_set_fan_duty { +/* Version 1 of input params */ +struct __ec_align_size1 ec_params_pwm_set_fan_duty_v1 { uint32_t percent; -} __packed; + uint8_t fan_idx; +}; + +#define EC_CMD_PWM_SET_DUTY 0x0025 +/* 16 bit duty cycle, 0xffff = 100% */ +#define EC_PWM_MAX_DUTY 0xffff + +enum ec_pwm_type { + /* All types, indexed by board-specific enum pwm_channel */ + EC_PWM_TYPE_GENERIC = 0, + /* Keyboard backlight */ + EC_PWM_TYPE_KB_LIGHT, + /* Display backlight */ + EC_PWM_TYPE_DISPLAY_LIGHT, + EC_PWM_TYPE_COUNT, +}; + +struct __ec_align4 ec_params_pwm_set_duty { + uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */ + uint8_t pwm_type; /* ec_pwm_type */ + uint8_t index; /* Type-specific index, or 0 if unique */ +}; + +#define EC_CMD_PWM_GET_DUTY 0x0026 + +struct __ec_align1 ec_params_pwm_get_duty { + uint8_t pwm_type; /* ec_pwm_type */ + uint8_t index; /* Type-specific index, or 0 if unique */ +}; + +struct __ec_align2 ec_response_pwm_get_duty { + uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */ +}; /*****************************************************************************/ /* @@ -773,9 +1530,9 @@ struct ec_params_pwm_set_fan_duty { * into a subcommand. We'll make separate structs for subcommands with * different input args, so that we know how much to expect. */ -#define EC_CMD_LIGHTBAR_CMD 0x28 +#define EC_CMD_LIGHTBAR_CMD 0x0028 -struct rgb_s { +struct __ec_todo_unpacked rgb_s { uint8_t r, g, b; }; @@ -783,17 +1540,17 @@ struct rgb_s { /* List of tweakable parameters. NOTE: It's __packed so it can be sent in a * host command, but the alignment is the same regardless. Keep it that way. */ -struct lightbar_params { +struct __ec_todo_packed lightbar_params_v0 { /* Timing */ - int google_ramp_up; - int google_ramp_down; - int s3s0_ramp_up; - int s0_tick_delay[2]; /* AC=0/1 */ - int s0a_tick_delay[2]; /* AC=0/1 */ - int s0s3_ramp_down; - int s3_sleep_for; - int s3_ramp_up; - int s3_ramp_down; + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; /* Oscillation */ uint8_t new_s0; @@ -815,52 +1572,221 @@ struct lightbar_params { /* Color palette */ struct rgb_s color[8]; /* 0-3 are Google colors */ -} __packed; +}; + +struct __ec_todo_packed lightbar_params_v1 { + /* Timing */ + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; + int32_t s5_ramp_up; + int32_t s5_ramp_down; + int32_t tap_tick_delay; + int32_t tap_gate_delay; + int32_t tap_display_time; + + /* Tap-for-battery params */ + uint8_t tap_pct_red; + uint8_t tap_pct_green; + uint8_t tap_seg_min_on; + uint8_t tap_seg_max_on; + uint8_t tap_seg_osc; + uint8_t tap_idx[3]; + + /* Oscillation */ + uint8_t osc_min[2]; /* AC=0/1 */ + uint8_t osc_max[2]; /* AC=0/1 */ + uint8_t w_ofs[2]; /* AC=0/1 */ + + /* Brightness limits based on the backlight and AC. */ + uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ + uint8_t bright_bl_on_min[2]; /* AC=0/1 */ + uint8_t bright_bl_on_max[2]; /* AC=0/1 */ + + /* Battery level thresholds */ + uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; + + /* Map [AC][battery_level] to color index */ + uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ + uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ + + /* s5: single color pulse on inhibited power-up */ + uint8_t s5_idx; + + /* Color palette */ + struct rgb_s color[8]; /* 0-3 are Google colors */ +}; + +/* Lightbar command params v2 + * crbug.com/467716 + * + * lightbar_parms_v1 was too big for i2c, therefore in v2, we split them up by + * logical groups to make it more manageable ( < 120 bytes). + * + * NOTE: Each of these groups must be less than 120 bytes. + */ + +struct __ec_todo_packed lightbar_params_v2_timing { + /* Timing */ + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; + int32_t s5_ramp_up; + int32_t s5_ramp_down; + int32_t tap_tick_delay; + int32_t tap_gate_delay; + int32_t tap_display_time; +}; + +struct __ec_todo_packed lightbar_params_v2_tap { + /* Tap-for-battery params */ + uint8_t tap_pct_red; + uint8_t tap_pct_green; + uint8_t tap_seg_min_on; + uint8_t tap_seg_max_on; + uint8_t tap_seg_osc; + uint8_t tap_idx[3]; +}; + +struct __ec_todo_packed lightbar_params_v2_oscillation { + /* Oscillation */ + uint8_t osc_min[2]; /* AC=0/1 */ + uint8_t osc_max[2]; /* AC=0/1 */ + uint8_t w_ofs[2]; /* AC=0/1 */ +}; + +struct __ec_todo_packed lightbar_params_v2_brightness { + /* Brightness limits based on the backlight and AC. */ + uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ + uint8_t bright_bl_on_min[2]; /* AC=0/1 */ + uint8_t bright_bl_on_max[2]; /* AC=0/1 */ +}; + +struct __ec_todo_packed lightbar_params_v2_thresholds { + /* Battery level thresholds */ + uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; +}; + +struct __ec_todo_packed lightbar_params_v2_colors { + /* Map [AC][battery_level] to color index */ + uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ + uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ + + /* s5: single color pulse on inhibited power-up */ + uint8_t s5_idx; + + /* Color palette */ + struct rgb_s color[8]; /* 0-3 are Google colors */ +}; + +/* Lightbyte program. */ +#define EC_LB_PROG_LEN 192 +struct __ec_todo_unpacked lightbar_program { + uint8_t size; + uint8_t data[EC_LB_PROG_LEN]; +}; -struct ec_params_lightbar { +struct __ec_todo_packed ec_params_lightbar { uint8_t cmd; /* Command (see enum lightbar_command) */ union { - struct { + struct __ec_todo_unpacked { /* no args */ - } dump, off, on, init, get_seq, get_params; + } dump, off, on, init, get_seq, get_params_v0, get_params_v1, + version, get_brightness, get_demo, suspend, resume, + get_params_v2_timing, get_params_v2_tap, + get_params_v2_osc, get_params_v2_bright, + get_params_v2_thlds, get_params_v2_colors; - struct num { + struct __ec_todo_unpacked { uint8_t num; - } brightness, seq, demo; + } set_brightness, seq, demo; - struct reg { + struct __ec_todo_unpacked { uint8_t ctrl, reg, value; } reg; - struct rgb { + struct __ec_todo_unpacked { uint8_t led, red, green, blue; - } rgb; + } set_rgb; + + struct __ec_todo_unpacked { + uint8_t led; + } get_rgb; - struct lightbar_params set_params; + struct __ec_todo_unpacked { + uint8_t enable; + } manual_suspend_ctrl; + + struct lightbar_params_v0 set_params_v0; + struct lightbar_params_v1 set_params_v1; + + struct lightbar_params_v2_timing set_v2par_timing; + struct lightbar_params_v2_tap set_v2par_tap; + struct lightbar_params_v2_oscillation set_v2par_osc; + struct lightbar_params_v2_brightness set_v2par_bright; + struct lightbar_params_v2_thresholds set_v2par_thlds; + struct lightbar_params_v2_colors set_v2par_colors; + + struct lightbar_program set_program; }; -} __packed; +}; -struct ec_response_lightbar { +struct __ec_todo_packed ec_response_lightbar { union { - struct dump { - struct { + struct __ec_todo_unpacked { + struct __ec_todo_unpacked { uint8_t reg; uint8_t ic0; uint8_t ic1; } vals[23]; } dump; - struct get_seq { + struct __ec_todo_unpacked { uint8_t num; - } get_seq; + } get_seq, get_brightness, get_demo; - struct lightbar_params get_params; + struct lightbar_params_v0 get_params_v0; + struct lightbar_params_v1 get_params_v1; - struct { + + struct lightbar_params_v2_timing get_params_v2_timing; + struct lightbar_params_v2_tap get_params_v2_tap; + struct lightbar_params_v2_oscillation get_params_v2_osc; + struct lightbar_params_v2_brightness get_params_v2_bright; + struct lightbar_params_v2_thresholds get_params_v2_thlds; + struct lightbar_params_v2_colors get_params_v2_colors; + + struct __ec_todo_unpacked { + uint32_t num; + uint32_t flags; + } version; + + struct __ec_todo_unpacked { + uint8_t red, green, blue; + } get_rgb; + + struct __ec_todo_unpacked { /* no return params */ - } off, on, init, brightness, seq, reg, rgb, demo, set_params; + } off, on, init, set_brightness, seq, reg, set_rgb, + demo, set_params_v0, set_params_v1, + set_program, manual_suspend_ctrl, suspend, resume, + set_v2par_timing, set_v2par_tap, + set_v2par_osc, set_v2par_bright, set_v2par_thlds, + set_v2par_colors; }; -} __packed; +}; /* Lightbar commands */ enum lightbar_command { @@ -868,26 +1794,64 @@ enum lightbar_command { LIGHTBAR_CMD_OFF = 1, LIGHTBAR_CMD_ON = 2, LIGHTBAR_CMD_INIT = 3, - LIGHTBAR_CMD_BRIGHTNESS = 4, + LIGHTBAR_CMD_SET_BRIGHTNESS = 4, LIGHTBAR_CMD_SEQ = 5, LIGHTBAR_CMD_REG = 6, - LIGHTBAR_CMD_RGB = 7, + LIGHTBAR_CMD_SET_RGB = 7, LIGHTBAR_CMD_GET_SEQ = 8, LIGHTBAR_CMD_DEMO = 9, - LIGHTBAR_CMD_GET_PARAMS = 10, - LIGHTBAR_CMD_SET_PARAMS = 11, + LIGHTBAR_CMD_GET_PARAMS_V0 = 10, + LIGHTBAR_CMD_SET_PARAMS_V0 = 11, + LIGHTBAR_CMD_VERSION = 12, + LIGHTBAR_CMD_GET_BRIGHTNESS = 13, + LIGHTBAR_CMD_GET_RGB = 14, + LIGHTBAR_CMD_GET_DEMO = 15, + LIGHTBAR_CMD_GET_PARAMS_V1 = 16, + LIGHTBAR_CMD_SET_PARAMS_V1 = 17, + LIGHTBAR_CMD_SET_PROGRAM = 18, + LIGHTBAR_CMD_MANUAL_SUSPEND_CTRL = 19, + LIGHTBAR_CMD_SUSPEND = 20, + LIGHTBAR_CMD_RESUME = 21, + LIGHTBAR_CMD_GET_PARAMS_V2_TIMING = 22, + LIGHTBAR_CMD_SET_PARAMS_V2_TIMING = 23, + LIGHTBAR_CMD_GET_PARAMS_V2_TAP = 24, + LIGHTBAR_CMD_SET_PARAMS_V2_TAP = 25, + LIGHTBAR_CMD_GET_PARAMS_V2_OSCILLATION = 26, + LIGHTBAR_CMD_SET_PARAMS_V2_OSCILLATION = 27, + LIGHTBAR_CMD_GET_PARAMS_V2_BRIGHTNESS = 28, + LIGHTBAR_CMD_SET_PARAMS_V2_BRIGHTNESS = 29, + LIGHTBAR_CMD_GET_PARAMS_V2_THRESHOLDS = 30, + LIGHTBAR_CMD_SET_PARAMS_V2_THRESHOLDS = 31, + LIGHTBAR_CMD_GET_PARAMS_V2_COLORS = 32, + LIGHTBAR_CMD_SET_PARAMS_V2_COLORS = 33, LIGHTBAR_NUM_CMDS }; /*****************************************************************************/ /* LED control commands */ -#define EC_CMD_LED_CONTROL 0x29 +#define EC_CMD_LED_CONTROL 0x0029 enum ec_led_id { + /* LED to indicate battery state of charge */ EC_LED_ID_BATTERY_LED = 0, - EC_LED_ID_POWER_BUTTON_LED, + /* + * LED to indicate system power state (on or in suspend). + * May be on power button or on C-panel. + */ + EC_LED_ID_POWER_LED, + /* LED on power adapter or its plug */ EC_LED_ID_ADAPTER_LED, + /* LED to indicate left side */ + EC_LED_ID_LEFT_LED, + /* LED to indicate right side */ + EC_LED_ID_RIGHT_LED, + /* LED to indicate recovery mode with HW_REINIT */ + EC_LED_ID_RECOVERY_HW_REINIT_LED, + /* LED to indicate sysrq debug mode. */ + EC_LED_ID_SYSRQ_DEBUG_LED, + + EC_LED_ID_COUNT }; /* LED control flags */ @@ -900,18 +1864,19 @@ enum ec_led_colors { EC_LED_COLOR_BLUE, EC_LED_COLOR_YELLOW, EC_LED_COLOR_WHITE, + EC_LED_COLOR_AMBER, EC_LED_COLOR_COUNT }; -struct ec_params_led_control { +struct __ec_align1 ec_params_led_control { uint8_t led_id; /* Which LED to control */ uint8_t flags; /* Control flags */ uint8_t brightness[EC_LED_COLOR_COUNT]; -} __packed; +}; -struct ec_response_led_control { +struct __ec_align1 ec_response_led_control { /* * Available brightness value range. * @@ -920,7 +1885,7 @@ struct ec_response_led_control { * Other values means the LED is control by PWM. */ uint8_t brightness_range[EC_LED_COLOR_COUNT]; -} __packed; +}; /*****************************************************************************/ /* Verified boot commands */ @@ -931,9 +1896,9 @@ struct ec_response_led_control { */ /* Verified boot hash command */ -#define EC_CMD_VBOOT_HASH 0x2A +#define EC_CMD_VBOOT_HASH 0x002A -struct ec_params_vboot_hash { +struct __ec_align4 ec_params_vboot_hash { uint8_t cmd; /* enum ec_vboot_hash_cmd */ uint8_t hash_type; /* enum ec_vboot_hash_type */ uint8_t nonce_size; /* Nonce size; may be 0 */ @@ -941,9 +1906,9 @@ struct ec_params_vboot_hash { uint32_t offset; /* Offset in flash to hash */ uint32_t size; /* Number of bytes to hash */ uint8_t nonce_data[64]; /* Nonce data; ignored if nonce_size=0 */ -} __packed; +}; -struct ec_response_vboot_hash { +struct __ec_align4 ec_response_vboot_hash { uint8_t status; /* enum ec_vboot_hash_status */ uint8_t hash_type; /* enum ec_vboot_hash_type */ uint8_t digest_size; /* Size of hash digest in bytes */ @@ -951,7 +1916,7 @@ struct ec_response_vboot_hash { uint32_t offset; /* Offset in flash which was hashed */ uint32_t size; /* Number of bytes hashed */ uint8_t hash_digest[64]; /* Hash digest data */ -} __packed; +}; enum ec_vboot_hash_cmd { EC_VBOOT_HASH_GET = 0, /* Get current hash status */ @@ -975,741 +1940,2662 @@ enum ec_vboot_hash_status { * If one of these is specified, the EC will automatically update offset and * size to the correct values for the specified image (RO or RW). */ -#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe -#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd +#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe +#define EC_VBOOT_HASH_OFFSET_ACTIVE 0xfffffffd +#define EC_VBOOT_HASH_OFFSET_UPDATE 0xfffffffc /*****************************************************************************/ -/* USB charging control commands */ +/* + * Motion sense commands. We'll make separate structs for sub-commands with + * different input args, so that we know how much to expect. + */ +#define EC_CMD_MOTION_SENSE_CMD 0x002B -/* Set USB port charging mode */ -#define EC_CMD_USB_CHARGE_SET_MODE 0x30 +/* Motion sense commands */ +enum motionsense_command { + /* + * Dump command returns all motion sensor data including motion sense + * module flags and individual sensor flags. + */ + MOTIONSENSE_CMD_DUMP = 0, -struct ec_params_usb_charge_set_mode { - uint8_t usb_port_id; - uint8_t mode; -} __packed; + /* + * Info command returns data describing the details of a given sensor, + * including enum motionsensor_type, enum motionsensor_location, and + * enum motionsensor_chip. + */ + MOTIONSENSE_CMD_INFO = 1, -/*****************************************************************************/ -/* Persistent storage for host */ + /* + * EC Rate command is a setter/getter command for the EC sampling rate + * in milliseconds. + * It is per sensor, the EC run sample task at the minimum of all + * sensors EC_RATE. + * For sensors without hardware FIFO, EC_RATE should be equals to 1/ODR + * to collect all the sensor samples. + * For sensor with hardware FIFO, EC_RATE is used as the maximal delay + * to process of all motion sensors in milliseconds. + */ + MOTIONSENSE_CMD_EC_RATE = 2, -/* Maximum bytes that can be read/written in a single command */ -#define EC_PSTORE_SIZE_MAX 64 + /* + * Sensor ODR command is a setter/getter command for the output data + * rate of a specific motion sensor in millihertz. + */ + MOTIONSENSE_CMD_SENSOR_ODR = 3, -/* Get persistent storage info */ -#define EC_CMD_PSTORE_INFO 0x40 + /* + * Sensor range command is a setter/getter command for the range of + * a specified motion sensor in +/-G's or +/- deg/s. + */ + MOTIONSENSE_CMD_SENSOR_RANGE = 4, -struct ec_response_pstore_info { - /* Persistent storage size, in bytes */ - uint32_t pstore_size; - /* Access size; read/write offset and size must be a multiple of this */ - uint32_t access_size; -} __packed; + /* + * Setter/getter command for the keyboard wake angle. When the lid + * angle is greater than this value, keyboard wake is disabled in S3, + * and when the lid angle goes less than this value, keyboard wake is + * enabled. Note, the lid angle measurement is an approximate, + * un-calibrated value, hence the wake angle isn't exact. + */ + MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5, -/* - * Read persistent storage - * - * Response is params.size bytes of data. - */ -#define EC_CMD_PSTORE_READ 0x41 + /* + * Returns a single sensor data. + */ + MOTIONSENSE_CMD_DATA = 6, -struct ec_params_pstore_read { - uint32_t offset; /* Byte offset to read */ - uint32_t size; /* Size to read in bytes */ -} __packed; + /* + * Return sensor fifo info. + */ + MOTIONSENSE_CMD_FIFO_INFO = 7, -/* Write persistent storage */ -#define EC_CMD_PSTORE_WRITE 0x42 + /* + * Insert a flush element in the fifo and return sensor fifo info. + * The host can use that element to synchronize its operation. + */ + MOTIONSENSE_CMD_FIFO_FLUSH = 8, -struct ec_params_pstore_write { - uint32_t offset; /* Byte offset to write */ - uint32_t size; /* Size to write in bytes */ - uint8_t data[EC_PSTORE_SIZE_MAX]; -} __packed; + /* + * Return a portion of the fifo. + */ + MOTIONSENSE_CMD_FIFO_READ = 9, -/*****************************************************************************/ -/* Real-time clock */ + /* + * Perform low level calibration. + * On sensors that support it, ask to do offset calibration. + */ + MOTIONSENSE_CMD_PERFORM_CALIB = 10, -/* RTC params and response structures */ -struct ec_params_rtc { - uint32_t time; -} __packed; + /* + * Sensor Offset command is a setter/getter command for the offset + * used for calibration. + * The offsets can be calculated by the host, or via + * PERFORM_CALIB command. + */ + MOTIONSENSE_CMD_SENSOR_OFFSET = 11, -struct ec_response_rtc { - uint32_t time; -} __packed; + /* + * List available activities for a MOTION sensor. + * Indicates if they are enabled or disabled. + */ + MOTIONSENSE_CMD_LIST_ACTIVITIES = 12, -/* These use ec_response_rtc */ -#define EC_CMD_RTC_GET_VALUE 0x44 -#define EC_CMD_RTC_GET_ALARM 0x45 + /* + * Activity management + * Enable/Disable activity recognition. + */ + MOTIONSENSE_CMD_SET_ACTIVITY = 13, -/* These all use ec_params_rtc */ -#define EC_CMD_RTC_SET_VALUE 0x46 -#define EC_CMD_RTC_SET_ALARM 0x47 + /* + * Lid Angle + */ + MOTIONSENSE_CMD_LID_ANGLE = 14, -/*****************************************************************************/ -/* Port80 log access */ + /* + * Allow the FIFO to trigger interrupt via MKBP events. + * By default the FIFO does not send interrupt to process the FIFO + * until the AP is ready or it is coming from a wakeup sensor. + */ + MOTIONSENSE_CMD_FIFO_INT_ENABLE = 15, -/* Get last port80 code from previous boot */ -#define EC_CMD_PORT80_LAST_BOOT 0x48 + /* + * Spoof the readings of the sensors. The spoofed readings can be set + * to arbitrary values, or will lock to the last read actual values. + */ + MOTIONSENSE_CMD_SPOOF = 16, -struct ec_response_port80_last_boot { - uint16_t code; -} __packed; + /* Number of motionsense sub-commands. */ + MOTIONSENSE_NUM_CMDS +}; -/*****************************************************************************/ -/* Thermal engine commands */ +/* List of motion sensor types. */ +enum motionsensor_type { + MOTIONSENSE_TYPE_ACCEL = 0, + MOTIONSENSE_TYPE_GYRO = 1, + MOTIONSENSE_TYPE_MAG = 2, + MOTIONSENSE_TYPE_PROX = 3, + MOTIONSENSE_TYPE_LIGHT = 4, + MOTIONSENSE_TYPE_ACTIVITY = 5, + MOTIONSENSE_TYPE_BARO = 6, + MOTIONSENSE_TYPE_MAX, +}; -/* Set thershold value */ -#define EC_CMD_THERMAL_SET_THRESHOLD 0x50 +/* List of motion sensor locations. */ +enum motionsensor_location { + MOTIONSENSE_LOC_BASE = 0, + MOTIONSENSE_LOC_LID = 1, + MOTIONSENSE_LOC_MAX, +}; -struct ec_params_thermal_set_threshold { - uint8_t sensor_type; - uint8_t threshold_id; - uint16_t value; -} __packed; +/* List of motion sensor chips. */ +enum motionsensor_chip { + MOTIONSENSE_CHIP_KXCJ9 = 0, + MOTIONSENSE_CHIP_LSM6DS0 = 1, + MOTIONSENSE_CHIP_BMI160 = 2, + MOTIONSENSE_CHIP_SI1141 = 3, + MOTIONSENSE_CHIP_SI1142 = 4, + MOTIONSENSE_CHIP_SI1143 = 5, + MOTIONSENSE_CHIP_KX022 = 6, + MOTIONSENSE_CHIP_L3GD20H = 7, + MOTIONSENSE_CHIP_BMA255 = 8, + MOTIONSENSE_CHIP_BMP280 = 9, + MOTIONSENSE_CHIP_OPT3001 = 10, +}; -/* Get threshold value */ -#define EC_CMD_THERMAL_GET_THRESHOLD 0x51 +struct __ec_todo_packed ec_response_motion_sensor_data { + /* Flags for each sensor. */ + uint8_t flags; + /* sensor number the data comes from */ + uint8_t sensor_num; + /* Each sensor is up to 3-axis. */ + union { + int16_t data[3]; + struct __ec_todo_packed { + uint16_t reserved; + uint32_t timestamp; + }; + struct __ec_todo_unpacked { + uint8_t activity; /* motionsensor_activity */ + uint8_t state; + int16_t add_info[2]; + }; + }; +}; -struct ec_params_thermal_get_threshold { - uint8_t sensor_type; - uint8_t threshold_id; -} __packed; +/* Note: used in ec_response_get_next_data */ +struct __ec_todo_packed ec_response_motion_sense_fifo_info { + /* Size of the fifo */ + uint16_t size; + /* Amount of space used in the fifo */ + uint16_t count; + /* Timestamp recorded in us */ + uint32_t timestamp; + /* Total amount of vector lost */ + uint16_t total_lost; + /* Lost events since the last fifo_info, per sensors */ + uint16_t lost[0]; +}; -struct ec_response_thermal_get_threshold { - uint16_t value; -} __packed; +struct __ec_todo_packed ec_response_motion_sense_fifo_data { + uint32_t number_data; + struct ec_response_motion_sensor_data data[0]; +}; -/* Toggle automatic fan control */ -#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52 +/* List supported activity recognition */ +enum motionsensor_activity { + MOTIONSENSE_ACTIVITY_RESERVED = 0, + MOTIONSENSE_ACTIVITY_SIG_MOTION = 1, + MOTIONSENSE_ACTIVITY_DOUBLE_TAP = 2, +}; -/* Get TMP006 calibration data */ -#define EC_CMD_TMP006_GET_CALIBRATION 0x53 +struct __ec_todo_unpacked ec_motion_sense_activity { + uint8_t sensor_num; + uint8_t activity; /* one of enum motionsensor_activity */ + uint8_t enable; /* 1: enable, 0: disable */ + uint8_t reserved; + uint16_t parameters[3]; /* activity dependent parameters */ +}; -struct ec_params_tmp006_get_calibration { - uint8_t index; -} __packed; +/* Module flag masks used for the dump sub-command. */ +#define MOTIONSENSE_MODULE_FLAG_ACTIVE (1<<0) -struct ec_response_tmp006_get_calibration { - float s0; - float b0; - float b1; - float b2; -} __packed; +/* Sensor flag masks used for the dump sub-command. */ +#define MOTIONSENSE_SENSOR_FLAG_PRESENT (1<<0) -/* Set TMP006 calibration data */ -#define EC_CMD_TMP006_SET_CALIBRATION 0x54 +/* + * Flush entry for synchronization. + * data contains time stamp + */ +#define MOTIONSENSE_SENSOR_FLAG_FLUSH (1<<0) +#define MOTIONSENSE_SENSOR_FLAG_TIMESTAMP (1<<1) +#define MOTIONSENSE_SENSOR_FLAG_WAKEUP (1<<2) +#define MOTIONSENSE_SENSOR_FLAG_TABLET_MODE (1<<3) -struct ec_params_tmp006_set_calibration { - uint8_t index; - uint8_t reserved[3]; /* Reserved; set 0 */ - float s0; - float b0; - float b1; - float b2; -} __packed; +/* + * Send this value for the data element to only perform a read. If you + * send any other value, the EC will interpret it as data to set and will + * return the actual value set. + */ +#define EC_MOTION_SENSE_NO_VALUE -1 -/*****************************************************************************/ -/* MKBP - Matrix KeyBoard Protocol */ +#define EC_MOTION_SENSE_INVALID_CALIB_TEMP 0x8000 + +/* MOTIONSENSE_CMD_SENSOR_OFFSET subcommand flag */ +/* Set Calibration information */ +#define MOTION_SENSE_SET_OFFSET 1 + +#define LID_ANGLE_UNRELIABLE 500 + +enum motionsense_spoof_mode { + /* Disable spoof mode. */ + MOTIONSENSE_SPOOF_MODE_DISABLE = 0, + + /* Enable spoof mode, but use provided component values. */ + MOTIONSENSE_SPOOF_MODE_CUSTOM, + + /* Enable spoof mode, but use the current sensor values. */ + MOTIONSENSE_SPOOF_MODE_LOCK_CURRENT, + + /* Query the current spoof mode status for the sensor. */ + MOTIONSENSE_SPOOF_MODE_QUERY, +}; + +struct __ec_todo_packed ec_params_motion_sense { + uint8_t cmd; + union { + /* Used for MOTIONSENSE_CMD_DUMP */ + struct __ec_todo_unpacked { + /* + * Maximal number of sensor the host is expecting. + * 0 means the host is only interested in the number + * of sensors controlled by the EC. + */ + uint8_t max_sensor_count; + } dump; + + /* + * Used for MOTIONSENSE_CMD_KB_WAKE_ANGLE. + */ + struct __ec_todo_unpacked { + /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. + * kb_wake_angle: angle to wakup AP. + */ + int16_t data; + } kb_wake_angle; + + /* Used for MOTIONSENSE_CMD_INFO, MOTIONSENSE_CMD_DATA + * and MOTIONSENSE_CMD_PERFORM_CALIB. */ + struct __ec_todo_unpacked { + uint8_t sensor_num; + } info, info_3, data, fifo_flush, perform_calib, + list_activities; + + /* + * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR + * and MOTIONSENSE_CMD_SENSOR_RANGE. + */ + struct __ec_todo_unpacked { + uint8_t sensor_num; + + /* Rounding flag, true for round-up, false for down. */ + uint8_t roundup; + + uint16_t reserved; + + /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ + int32_t data; + } ec_rate, sensor_odr, sensor_range; + + /* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */ + struct __ec_todo_packed { + uint8_t sensor_num; + + /* + * bit 0: If set (MOTION_SENSE_SET_OFFSET), set + * the calibration information in the EC. + * If unset, just retrieve calibration information. + */ + uint16_t flags; + + /* + * Temperature at calibration, in units of 0.01 C + * 0x8000: invalid / unknown. + * 0x0: 0C + * 0x7fff: +327.67C + */ + int16_t temp; + + /* + * Offset for calibration. + * Unit: + * Accelerometer: 1/1024 g + * Gyro: 1/1024 deg/s + * Compass: 1/16 uT + */ + int16_t offset[3]; + } sensor_offset; + + /* Used for MOTIONSENSE_CMD_FIFO_INFO */ + struct __ec_todo_unpacked { + } fifo_info; + + /* Used for MOTIONSENSE_CMD_FIFO_READ */ + struct __ec_todo_unpacked { + /* + * Number of expected vector to return. + * EC may return less or 0 if none available. + */ + uint32_t max_data_vector; + } fifo_read; + + struct ec_motion_sense_activity set_activity; + + /* Used for MOTIONSENSE_CMD_LID_ANGLE */ + struct __ec_todo_unpacked { + } lid_angle; + + /* Used for MOTIONSENSE_CMD_FIFO_INT_ENABLE */ + struct __ec_todo_unpacked { + /* + * 1: enable, 0 disable fifo, + * EC_MOTION_SENSE_NO_VALUE return value. + */ + int8_t enable; + } fifo_int_enable; + + /* Used for MOTIONSENSE_CMD_SPOOF */ + struct __ec_todo_packed { + uint8_t sensor_id; + + /* See enum motionsense_spoof_mode. */ + uint8_t spoof_enable; + + /* Ignored, used for alignment. */ + uint8_t reserved; + + /* Individual component values to spoof. */ + int16_t components[3]; + } spoof; + }; +}; + +struct __ec_todo_packed ec_response_motion_sense { + union { + /* Used for MOTIONSENSE_CMD_DUMP */ + struct __ec_todo_unpacked { + /* Flags representing the motion sensor module. */ + uint8_t module_flags; + + /* Number of sensors managed directly by the EC */ + uint8_t sensor_count; + + /* + * sensor data is truncated if response_max is too small + * for holding all the data. + */ + struct ec_response_motion_sensor_data sensor[0]; + } dump; + + /* Used for MOTIONSENSE_CMD_INFO. */ + struct __ec_todo_unpacked { + /* Should be element of enum motionsensor_type. */ + uint8_t type; + + /* Should be element of enum motionsensor_location. */ + uint8_t location; + + /* Should be element of enum motionsensor_chip. */ + uint8_t chip; + } info; + + /* Used for MOTIONSENSE_CMD_INFO version 3 */ + struct __ec_todo_unpacked { + /* Should be element of enum motionsensor_type. */ + uint8_t type; + + /* Should be element of enum motionsensor_location. */ + uint8_t location; + + /* Should be element of enum motionsensor_chip. */ + uint8_t chip; + + /* Minimum sensor sampling frequency */ + uint32_t min_frequency; + + /* Maximum sensor sampling frequency */ + uint32_t max_frequency; + + /* Max number of sensor events that could be in fifo */ + uint32_t fifo_max_event_count; + } info_3; + + /* Used for MOTIONSENSE_CMD_DATA */ + struct ec_response_motion_sensor_data data; + + /* + * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR, + * MOTIONSENSE_CMD_SENSOR_RANGE, + * MOTIONSENSE_CMD_KB_WAKE_ANGLE, + * MOTIONSENSE_CMD_FIFO_INT_ENABLE and + * MOTIONSENSE_CMD_SPOOF. + */ + struct __ec_todo_unpacked { + /* Current value of the parameter queried. */ + int32_t ret; + } ec_rate, sensor_odr, sensor_range, kb_wake_angle, + fifo_int_enable, spoof; + + /* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */ + struct __ec_todo_unpacked { + int16_t temp; + int16_t offset[3]; + } sensor_offset, perform_calib; + + struct ec_response_motion_sense_fifo_info fifo_info, fifo_flush; + + struct ec_response_motion_sense_fifo_data fifo_read; + + struct __ec_todo_packed { + uint16_t reserved; + uint32_t enabled; + uint32_t disabled; + } list_activities; + + struct __ec_todo_unpacked { + } set_activity; + + /* Used for MOTIONSENSE_CMD_LID_ANGLE */ + struct __ec_todo_unpacked { + /* + * Angle between 0 and 360 degree if available, + * LID_ANGLE_UNRELIABLE otherwise. + */ + uint16_t value; + } lid_angle; + }; +}; + +/*****************************************************************************/ +/* Force lid open command */ + +/* Make lid event always open */ +#define EC_CMD_FORCE_LID_OPEN 0x002C + +struct __ec_align1 ec_params_force_lid_open { + uint8_t enabled; +}; + +/*****************************************************************************/ +/* Configure the behavior of the power button */ +#define EC_CMD_CONFIG_POWER_BUTTON 0x002D + +enum ec_config_power_button_flags { + /* Enable/Disable power button pulses for x86 devices */ + EC_POWER_BUTTON_ENABLE_PULSE = (1 << 0), +}; + +struct __ec_align1 ec_params_config_power_button { + /* See enum ec_config_power_button_flags */ + uint8_t flags; +}; + +/*****************************************************************************/ +/* USB charging control commands */ + +/* Set USB port charging mode */ +#define EC_CMD_USB_CHARGE_SET_MODE 0x0030 + +struct __ec_align1 ec_params_usb_charge_set_mode { + uint8_t usb_port_id; + uint8_t mode; +}; + +/*****************************************************************************/ +/* Persistent storage for host */ + +/* Maximum bytes that can be read/written in a single command */ +#define EC_PSTORE_SIZE_MAX 64 + +/* Get persistent storage info */ +#define EC_CMD_PSTORE_INFO 0x0040 + +struct __ec_align4 ec_response_pstore_info { + /* Persistent storage size, in bytes */ + uint32_t pstore_size; + /* Access size; read/write offset and size must be a multiple of this */ + uint32_t access_size; +}; + +/* + * Read persistent storage + * + * Response is params.size bytes of data. + */ +#define EC_CMD_PSTORE_READ 0x0041 + +struct __ec_align4 ec_params_pstore_read { + uint32_t offset; /* Byte offset to read */ + uint32_t size; /* Size to read in bytes */ +}; + +/* Write persistent storage */ +#define EC_CMD_PSTORE_WRITE 0x0042 + +struct __ec_align4 ec_params_pstore_write { + uint32_t offset; /* Byte offset to write */ + uint32_t size; /* Size to write in bytes */ + uint8_t data[EC_PSTORE_SIZE_MAX]; +}; + +/*****************************************************************************/ +/* Real-time clock */ + +/* RTC params and response structures */ +struct __ec_align4 ec_params_rtc { + uint32_t time; +}; + +struct __ec_align4 ec_response_rtc { + uint32_t time; +}; + +/* These use ec_response_rtc */ +#define EC_CMD_RTC_GET_VALUE 0x0044 +#define EC_CMD_RTC_GET_ALARM 0x0045 + +/* These all use ec_params_rtc */ +#define EC_CMD_RTC_SET_VALUE 0x0046 +#define EC_CMD_RTC_SET_ALARM 0x0047 + +/* Pass as time param to SET_ALARM to clear the current alarm */ +#define EC_RTC_ALARM_CLEAR 0 + +/*****************************************************************************/ +/* Port80 log access */ + +/* Maximum entries that can be read/written in a single command */ +#define EC_PORT80_SIZE_MAX 32 + +/* Get last port80 code from previous boot */ +#define EC_CMD_PORT80_LAST_BOOT 0x0048 +#define EC_CMD_PORT80_READ 0x0048 + +enum ec_port80_subcmd { + EC_PORT80_GET_INFO = 0, + EC_PORT80_READ_BUFFER, +}; + +struct __ec_todo_packed ec_params_port80_read { + uint16_t subcmd; + union { + struct __ec_todo_unpacked { + uint32_t offset; + uint32_t num_entries; + } read_buffer; + }; +}; + +struct __ec_todo_packed ec_response_port80_read { + union { + struct __ec_todo_unpacked { + uint32_t writes; + uint32_t history_size; + uint32_t last_boot; + } get_info; + struct __ec_todo_unpacked { + uint16_t codes[EC_PORT80_SIZE_MAX]; + } data; + }; +}; + +struct __ec_align2 ec_response_port80_last_boot { + uint16_t code; +}; + +/*****************************************************************************/ +/* Temporary secure storage for host verified boot use */ + +/* Number of bytes in a vstore slot */ +#define EC_VSTORE_SLOT_SIZE 64 + +/* Maximum number of vstore slots */ +#define EC_VSTORE_SLOT_MAX 32 + +/* Get persistent storage info */ +#define EC_CMD_VSTORE_INFO 0x0049 +struct __ec_align_size1 ec_response_vstore_info { + /* Indicates which slots are locked */ + uint32_t slot_locked; + /* Total number of slots available */ + uint8_t slot_count; +}; + +/* + * Read temporary secure storage + * + * Response is EC_VSTORE_SLOT_SIZE bytes of data. + */ +#define EC_CMD_VSTORE_READ 0x004A + +struct __ec_align1 ec_params_vstore_read { + uint8_t slot; /* Slot to read from */ +}; + +struct __ec_align1 ec_response_vstore_read { + uint8_t data[EC_VSTORE_SLOT_SIZE]; +}; + +/* + * Write temporary secure storage and lock it. + */ +#define EC_CMD_VSTORE_WRITE 0x004B + +struct __ec_align1 ec_params_vstore_write { + uint8_t slot; /* Slot to write to */ + uint8_t data[EC_VSTORE_SLOT_SIZE]; +}; + +/*****************************************************************************/ +/* Thermal engine commands. Note that there are two implementations. We'll + * reuse the command number, but the data and behavior is incompatible. + * Version 0 is what originally shipped on Link. + * Version 1 separates the CPU thermal limits from the fan control. + */ + +#define EC_CMD_THERMAL_SET_THRESHOLD 0x0050 +#define EC_CMD_THERMAL_GET_THRESHOLD 0x0051 + +/* The version 0 structs are opaque. You have to know what they are for + * the get/set commands to make any sense. + */ + +/* Version 0 - set */ +struct __ec_align2 ec_params_thermal_set_threshold { + uint8_t sensor_type; + uint8_t threshold_id; + uint16_t value; +}; + +/* Version 0 - get */ +struct __ec_align1 ec_params_thermal_get_threshold { + uint8_t sensor_type; + uint8_t threshold_id; +}; + +struct __ec_align2 ec_response_thermal_get_threshold { + uint16_t value; +}; + + +/* The version 1 structs are visible. */ +enum ec_temp_thresholds { + EC_TEMP_THRESH_WARN = 0, + EC_TEMP_THRESH_HIGH, + EC_TEMP_THRESH_HALT, + + EC_TEMP_THRESH_COUNT +}; + +/* + * Thermal configuration for one temperature sensor. Temps are in degrees K. + * Zero values will be silently ignored by the thermal task. + * + * Note that this structure is a sub-structure of + * ec_params_thermal_set_threshold_v1, but maintains its alignment there. + */ +struct __ec_align4 ec_thermal_config { + uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */ + uint32_t temp_fan_off; /* no active cooling needed */ + uint32_t temp_fan_max; /* max active cooling needed */ +}; + +/* Version 1 - get config for one sensor. */ +struct __ec_align4 ec_params_thermal_get_threshold_v1 { + uint32_t sensor_num; +}; +/* This returns a struct ec_thermal_config */ + +/* Version 1 - set config for one sensor. + * Use read-modify-write for best results! */ +struct __ec_align4 ec_params_thermal_set_threshold_v1 { + uint32_t sensor_num; + struct ec_thermal_config cfg; +}; +/* This returns no data */ + +/****************************************************************************/ + +/* Toggle automatic fan control */ +#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052 + +/* Version 1 of input params */ +struct __ec_align1 ec_params_auto_fan_ctrl_v1 { + uint8_t fan_idx; +}; + +/* Get/Set TMP006 calibration data */ +#define EC_CMD_TMP006_GET_CALIBRATION 0x0053 +#define EC_CMD_TMP006_SET_CALIBRATION 0x0054 + +/* + * The original TMP006 calibration only needed four params, but now we need + * more. Since the algorithm is nothing but magic numbers anyway, we'll leave + * the params opaque. The v1 "get" response will include the algorithm number + * and how many params it requires. That way we can change the EC code without + * needing to update this file. We can also use a different algorithm on each + * sensor. + */ + +/* This is the same struct for both v0 and v1. */ +struct __ec_align1 ec_params_tmp006_get_calibration { + uint8_t index; +}; + +/* Version 0 */ +struct __ec_align4 ec_response_tmp006_get_calibration_v0 { + float s0; + float b0; + float b1; + float b2; +}; + +struct __ec_align4 ec_params_tmp006_set_calibration_v0 { + uint8_t index; + uint8_t reserved[3]; + float s0; + float b0; + float b1; + float b2; +}; + +/* Version 1 */ +struct __ec_align4 ec_response_tmp006_get_calibration_v1 { + uint8_t algorithm; + uint8_t num_params; + uint8_t reserved[2]; + float val[0]; +}; + +struct __ec_align4 ec_params_tmp006_set_calibration_v1 { + uint8_t index; + uint8_t algorithm; + uint8_t num_params; + uint8_t reserved; + float val[0]; +}; + + +/* Read raw TMP006 data */ +#define EC_CMD_TMP006_GET_RAW 0x0055 + +struct __ec_align1 ec_params_tmp006_get_raw { + uint8_t index; +}; + +struct __ec_align4 ec_response_tmp006_get_raw { + int32_t t; /* In 1/100 K */ + int32_t v; /* In nV */ +}; + +/*****************************************************************************/ +/* MKBP - Matrix KeyBoard Protocol */ /* * Read key state * * Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for * expected response size. + * + * NOTE: This has been superseded by EC_CMD_MKBP_GET_NEXT_EVENT. If you wish + * to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type + * EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX. */ -#define EC_CMD_MKBP_STATE 0x60 +#define EC_CMD_MKBP_STATE 0x0060 + +/* + * Provide information about various MKBP things. See enum ec_mkbp_info_type. + */ +#define EC_CMD_MKBP_INFO 0x0061 + +struct __ec_align_size1 ec_response_mkbp_info { + uint32_t rows; + uint32_t cols; + /* Formerly "switches", which was 0. */ + uint8_t reserved; +}; + +struct __ec_align1 ec_params_mkbp_info { + uint8_t info_type; + uint8_t event_type; +}; + +enum ec_mkbp_info_type { + /* + * Info about the keyboard matrix: number of rows and columns. + * + * Returns struct ec_response_mkbp_info. + */ + EC_MKBP_INFO_KBD = 0, + + /* + * For buttons and switches, info about which specifically are + * supported. event_type must be set to one of the values in enum + * ec_mkbp_event. + * + * For EC_MKBP_EVENT_BUTTON and EC_MKBP_EVENT_SWITCH, returns a 4 byte + * bitmask indicating which buttons or switches are present. See the + * bit inidices below. + */ + EC_MKBP_INFO_SUPPORTED = 1, + + /* + * Instantaneous state of buttons and switches. + * + * event_type must be set to one of the values in enum ec_mkbp_event. + * + * For EC_MKBP_EVENT_KEY_MATRIX, returns uint8_t key_matrix[13] + * indicating the current state of the keyboard matrix. + * + * For EC_MKBP_EVENT_HOST_EVENT, return uint32_t host_event, the raw + * event state. + * + * For EC_MKBP_EVENT_BUTTON, returns uint32_t buttons, indicating the + * state of supported buttons. + * + * For EC_MKBP_EVENT_SWITCH, returns uint32_t switches, indicating the + * state of supported switches. + */ + EC_MKBP_INFO_CURRENT = 2, +}; + +/* Simulate key press */ +#define EC_CMD_MKBP_SIMULATE_KEY 0x0062 + +struct __ec_align1 ec_params_mkbp_simulate_key { + uint8_t col; + uint8_t row; + uint8_t pressed; +}; + +/* Configure keyboard scanning */ +#define EC_CMD_MKBP_SET_CONFIG 0x0064 +#define EC_CMD_MKBP_GET_CONFIG 0x0065 + +/* flags */ +enum mkbp_config_flags { + EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */ +}; + +enum mkbp_config_valid { + EC_MKBP_VALID_SCAN_PERIOD = 1 << 0, + EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1, + EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3, + EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4, + EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5, + EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6, + EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7, +}; + +/* + * Configuration for our key scanning algorithm. + * + * Note that this is used as a sub-structure of + * ec_{params/response}_mkbp_get_config. + */ +struct __ec_align_size1 ec_mkbp_config { + uint32_t valid_mask; /* valid fields */ + uint8_t flags; /* some flags (enum mkbp_config_flags) */ + uint8_t valid_flags; /* which flags are valid */ + uint16_t scan_period_us; /* period between start of scans */ + /* revert to interrupt mode after no activity for this long */ + uint32_t poll_timeout_us; + /* + * minimum post-scan relax time. Once we finish a scan we check + * the time until we are due to start the next one. If this time is + * shorter this field, we use this instead. + */ + uint16_t min_post_scan_delay_us; + /* delay between setting up output and waiting for it to settle */ + uint16_t output_settle_us; + uint16_t debounce_down_us; /* time for debounce on key down */ + uint16_t debounce_up_us; /* time for debounce on key up */ + /* maximum depth to allow for fifo (0 = no keyscan output) */ + uint8_t fifo_max_depth; +}; + +struct __ec_align_size1 ec_params_mkbp_set_config { + struct ec_mkbp_config config; +}; + +struct __ec_align_size1 ec_response_mkbp_get_config { + struct ec_mkbp_config config; +}; + +/* Run the key scan emulation */ +#define EC_CMD_KEYSCAN_SEQ_CTRL 0x0066 + +enum ec_keyscan_seq_cmd { + EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */ + EC_KEYSCAN_SEQ_CLEAR = 1, /* Clear sequence */ + EC_KEYSCAN_SEQ_ADD = 2, /* Add item to sequence */ + EC_KEYSCAN_SEQ_START = 3, /* Start running sequence */ + EC_KEYSCAN_SEQ_COLLECT = 4, /* Collect sequence summary data */ +}; + +enum ec_collect_flags { + /* + * Indicates this scan was processed by the EC. Due to timing, some + * scans may be skipped. + */ + EC_KEYSCAN_SEQ_FLAG_DONE = 1 << 0, +}; + +struct __ec_align1 ec_collect_item { + uint8_t flags; /* some flags (enum ec_collect_flags) */ +}; + +struct __ec_todo_packed ec_params_keyscan_seq_ctrl { + uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */ + union { + struct __ec_align1 { + uint8_t active; /* still active */ + uint8_t num_items; /* number of items */ + /* Current item being presented */ + uint8_t cur_item; + } status; + struct __ec_todo_unpacked { + /* + * Absolute time for this scan, measured from the + * start of the sequence. + */ + uint32_t time_us; + uint8_t scan[0]; /* keyscan data */ + } add; + struct __ec_align1 { + uint8_t start_item; /* First item to return */ + uint8_t num_items; /* Number of items to return */ + } collect; + }; +}; + +struct __ec_todo_packed ec_result_keyscan_seq_ctrl { + union { + struct __ec_todo_unpacked { + uint8_t num_items; /* Number of items */ + /* Data for each item */ + struct ec_collect_item item[0]; + } collect; + }; +}; + +/* + * Get the next pending MKBP event. + * + * Returns EC_RES_UNAVAILABLE if there is no event pending. + */ +#define EC_CMD_GET_NEXT_EVENT 0x0067 + +enum ec_mkbp_event { + /* Keyboard matrix changed. The event data is the new matrix state. */ + EC_MKBP_EVENT_KEY_MATRIX = 0, + + /* New host event. The event data is 4 bytes of host event flags. */ + EC_MKBP_EVENT_HOST_EVENT = 1, + + /* New Sensor FIFO data. The event data is fifo_info structure. */ + EC_MKBP_EVENT_SENSOR_FIFO = 2, + + /* The state of the non-matrixed buttons have changed. */ + EC_MKBP_EVENT_BUTTON = 3, + + /* The state of the switches have changed. */ + EC_MKBP_EVENT_SWITCH = 4, + + /* New Fingerprint sensor event, the event data is fp_events bitmap. */ + EC_MKBP_EVENT_FINGERPRINT = 5, + + /* + * Sysrq event: send emulated sysrq. The event data is sysrq, + * corresponding to the key to be pressed. + */ + EC_MKBP_EVENT_SYSRQ = 6, + + /* Number of MKBP events */ + EC_MKBP_EVENT_COUNT, +}; + +union __ec_align_offset1 ec_response_get_next_data { + uint8_t key_matrix[13]; + + /* Unaligned */ + uint32_t host_event; + + struct __ec_todo_unpacked { + /* For aligning the fifo_info */ + uint8_t reserved[3]; + struct ec_response_motion_sense_fifo_info info; + } sensor_fifo; + + uint32_t buttons; + + uint32_t switches; + + uint32_t fp_events; + + uint32_t sysrq; +}; + +struct __ec_align1 ec_response_get_next_event { + uint8_t event_type; + /* Followed by event data if any */ + union ec_response_get_next_data data; +}; + +/* Bit indices for buttons and switches.*/ +/* Buttons */ +#define EC_MKBP_POWER_BUTTON 0 +#define EC_MKBP_VOL_UP 1 +#define EC_MKBP_VOL_DOWN 2 +#define EC_MKBP_RECOVERY 3 + +/* Switches */ +#define EC_MKBP_LID_OPEN 0 +#define EC_MKBP_TABLET_MODE 1 + +/* Run keyboard factory test scanning */ +#define EC_CMD_KEYBOARD_FACTORY_TEST 0x0068 + +struct __ec_align2 ec_response_keyboard_factory_test { + uint16_t shorted; /* Keyboard pins are shorted */ +}; + +/* Fingerprint events in 'fp_events' for EC_MKBP_EVENT_FINGERPRINT */ +#define EC_MKBP_FP_RAW_EVENT(fp_events) ((fp_events) & 0x00FFFFFF) +#define EC_MKBP_FP_FINGER_DOWN (1 << 29) +#define EC_MKBP_FP_FINGER_UP (1 << 30) +#define EC_MKBP_FP_IMAGE_READY (1 << 31) + +/*****************************************************************************/ +/* Temperature sensor commands */ + +/* Read temperature sensor info */ +#define EC_CMD_TEMP_SENSOR_GET_INFO 0x0070 + +struct __ec_align1 ec_params_temp_sensor_get_info { + uint8_t id; +}; + +struct __ec_align1 ec_response_temp_sensor_get_info { + char sensor_name[32]; + uint8_t sensor_type; +}; + +/*****************************************************************************/ + +/* + * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI + * commands accidentally sent to the wrong interface. See the ACPI section + * below. + */ + +/*****************************************************************************/ +/* Host event commands */ + + +/* Obsolete. New implementation should use EC_CMD_PROGRAM_HOST_EVENT instead */ +/* + * Host event mask params and response structures, shared by all of the host + * event commands below. + */ +struct __ec_align4 ec_params_host_event_mask { + uint32_t mask; +}; + +struct __ec_align4 ec_response_host_event_mask { + uint32_t mask; +}; + +/* These all use ec_response_host_event_mask */ +#define EC_CMD_HOST_EVENT_GET_B 0x0087 +#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x0088 +#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x0089 +#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x008D + +/* These all use ec_params_host_event_mask */ +#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x008A +#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x008B +#define EC_CMD_HOST_EVENT_CLEAR 0x008C +#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x008E +#define EC_CMD_HOST_EVENT_CLEAR_B 0x008F + +/* + * Unified host event programming interface - Should be used by newer versions + * of BIOS/OS to program host events and masks + */ + +struct __ec_align4 ec_params_host_event { + + /* Action requested by host - one of enum ec_host_event_action. */ + uint8_t action; + + /* + * Mask type that the host requested the action on - one of + * enum ec_host_event_mask_type. + */ + uint8_t mask_type; + + /* Set to 0, ignore on read */ + uint16_t reserved; + + /* Value to be used in case of set operations. */ + uint64_t value; +}; + +/* + * Response structure returned by EC_CMD_HOST_EVENT. + * Update the value on a GET request. Set to 0 on GET/CLEAR + */ + +struct __ec_align4 ec_response_host_event { + + /* Mask value in case of get operation */ + uint64_t value; +}; + +enum ec_host_event_action { + /* + * params.value is ignored. Value of mask_type populated + * in response.value + */ + EC_HOST_EVENT_GET, + + /* Bits in params.value are set */ + EC_HOST_EVENT_SET, + + /* Bits in params.value are cleared */ + EC_HOST_EVENT_CLEAR, +}; + +enum ec_host_event_mask_type { + + /* Main host event copy */ + EC_HOST_EVENT_MAIN, + + /* Copy B of host events */ + EC_HOST_EVENT_B, + + /* SCI Mask */ + EC_HOST_EVENT_SCI_MASK, + + /* SMI Mask */ + EC_HOST_EVENT_SMI_MASK, + + /* Mask of events that should be always reported in hostevents */ + EC_HOST_EVENT_ALWAYS_REPORT_MASK, + + /* Active wake mask */ + EC_HOST_EVENT_ACTIVE_WAKE_MASK, + + /* Lazy wake mask for S0ix */ + EC_HOST_EVENT_LAZY_WAKE_MASK_S0IX, + + /* Lazy wake mask for S3 */ + EC_HOST_EVENT_LAZY_WAKE_MASK_S3, + + /* Lazy wake mask for S5 */ + EC_HOST_EVENT_LAZY_WAKE_MASK_S5, +}; + +#define EC_CMD_HOST_EVENT 0x00A4 + +/*****************************************************************************/ +/* Switch commands */ + +/* Enable/disable LCD backlight */ +#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x0090 + +struct __ec_align1 ec_params_switch_enable_backlight { + uint8_t enabled; +}; + +/* Enable/disable WLAN/Bluetooth */ +#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x0091 +#define EC_VER_SWITCH_ENABLE_WIRELESS 1 + +/* Version 0 params; no response */ +struct __ec_align1 ec_params_switch_enable_wireless_v0 { + uint8_t enabled; +}; + +/* Version 1 params */ +struct __ec_align1 ec_params_switch_enable_wireless_v1 { + /* Flags to enable now */ + uint8_t now_flags; + + /* Which flags to copy from now_flags */ + uint8_t now_mask; + + /* + * Flags to leave enabled in S3, if they're on at the S0->S3 + * transition. (Other flags will be disabled by the S0->S3 + * transition.) + */ + uint8_t suspend_flags; + + /* Which flags to copy from suspend_flags */ + uint8_t suspend_mask; +}; + +/* Version 1 response */ +struct __ec_align1 ec_response_switch_enable_wireless_v1 { + /* Flags to enable now */ + uint8_t now_flags; + + /* Flags to leave enabled in S3 */ + uint8_t suspend_flags; +}; + +/*****************************************************************************/ +/* GPIO commands. Only available on EC if write protect has been disabled. */ + +/* Set GPIO output value */ +#define EC_CMD_GPIO_SET 0x0092 + +struct __ec_align1 ec_params_gpio_set { + char name[32]; + uint8_t val; +}; + +/* Get GPIO value */ +#define EC_CMD_GPIO_GET 0x0093 + +/* Version 0 of input params and response */ +struct __ec_align1 ec_params_gpio_get { + char name[32]; +}; + +struct __ec_align1 ec_response_gpio_get { + uint8_t val; +}; + +/* Version 1 of input params and response */ +struct __ec_align1 ec_params_gpio_get_v1 { + uint8_t subcmd; + union { + struct __ec_align1 { + char name[32]; + } get_value_by_name; + struct __ec_align1 { + uint8_t index; + } get_info; + }; +}; + +struct __ec_todo_packed ec_response_gpio_get_v1 { + union { + struct __ec_align1 { + uint8_t val; + } get_value_by_name, get_count; + struct __ec_todo_unpacked { + uint8_t val; + char name[32]; + uint32_t flags; + } get_info; + }; +}; + +enum gpio_get_subcmd { + EC_GPIO_GET_BY_NAME = 0, + EC_GPIO_GET_COUNT = 1, + EC_GPIO_GET_INFO = 2, +}; + +/*****************************************************************************/ +/* I2C commands. Only available when flash write protect is unlocked. */ + +/* + * CAUTION: These commands are deprecated, and are not supported anymore in EC + * builds >= 8398.0.0 (see crosbug.com/p/23570). + * + * Use EC_CMD_I2C_PASSTHRU instead. + */ + +/* Read I2C bus */ +#define EC_CMD_I2C_READ 0x0094 + +struct __ec_align_size1 ec_params_i2c_read { + uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ + uint8_t read_size; /* Either 8 or 16. */ + uint8_t port; + uint8_t offset; +}; + +struct __ec_align2 ec_response_i2c_read { + uint16_t data; +}; + +/* Write I2C bus */ +#define EC_CMD_I2C_WRITE 0x0095 + +struct __ec_align_size1 ec_params_i2c_write { + uint16_t data; + uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ + uint8_t write_size; /* Either 8 or 16. */ + uint8_t port; + uint8_t offset; +}; + +/*****************************************************************************/ +/* Charge state commands. Only available when flash write protect unlocked. */ + +/* Force charge state machine to stop charging the battery or force it to + * discharge the battery. + */ +#define EC_CMD_CHARGE_CONTROL 0x0096 +#define EC_VER_CHARGE_CONTROL 1 + +enum ec_charge_control_mode { + CHARGE_CONTROL_NORMAL = 0, + CHARGE_CONTROL_IDLE, + CHARGE_CONTROL_DISCHARGE, +}; + +struct __ec_align4 ec_params_charge_control { + uint32_t mode; /* enum charge_control_mode */ +}; + +/*****************************************************************************/ +/* Console commands. Only available when flash write protect is unlocked. */ + +/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */ +#define EC_CMD_CONSOLE_SNAPSHOT 0x0097 + +/* + * Read data from the saved snapshot. If the subcmd parameter is + * CONSOLE_READ_NEXT, this will return data starting from the beginning of + * the latest snapshot. If it is CONSOLE_READ_RECENT, it will start from the + * end of the previous snapshot. + * + * The params are only looked at in version >= 1 of this command. Prior + * versions will just default to CONSOLE_READ_NEXT behavior. + * + * Response is null-terminated string. Empty string, if there is no more + * remaining output. + */ +#define EC_CMD_CONSOLE_READ 0x0098 + +enum ec_console_read_subcmd { + CONSOLE_READ_NEXT = 0, + CONSOLE_READ_RECENT +}; + +struct __ec_align1 ec_params_console_read_v1 { + uint8_t subcmd; /* enum ec_console_read_subcmd */ +}; + +/*****************************************************************************/ + +/* + * Cut off battery power immediately or after the host has shut down. + * + * return EC_RES_INVALID_COMMAND if unsupported by a board/battery. + * EC_RES_SUCCESS if the command was successful. + * EC_RES_ERROR if the cut off command failed. + */ +#define EC_CMD_BATTERY_CUT_OFF 0x0099 + +#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0) + +struct __ec_align1 ec_params_battery_cutoff { + uint8_t flags; +}; + +/*****************************************************************************/ +/* USB port mux control. */ + +/* + * Switch USB mux or return to automatic switching. + */ +#define EC_CMD_USB_MUX 0x009A + +struct __ec_align1 ec_params_usb_mux { + uint8_t mux; +}; + +/*****************************************************************************/ +/* LDOs / FETs control. */ + +enum ec_ldo_state { + EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */ + EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */ +}; + +/* + * Switch on/off a LDO. + */ +#define EC_CMD_LDO_SET 0x009B + +struct __ec_align1 ec_params_ldo_set { + uint8_t index; + uint8_t state; +}; + +/* + * Get LDO state. + */ +#define EC_CMD_LDO_GET 0x009C + +struct __ec_align1 ec_params_ldo_get { + uint8_t index; +}; + +struct __ec_align1 ec_response_ldo_get { + uint8_t state; +}; + +/*****************************************************************************/ +/* Power info. */ + +/* + * Get power info. + */ +#define EC_CMD_POWER_INFO 0x009D + +struct __ec_align4 ec_response_power_info { + uint32_t usb_dev_type; + uint16_t voltage_ac; + uint16_t voltage_system; + uint16_t current_system; + uint16_t usb_current_limit; +}; + +/*****************************************************************************/ +/* I2C passthru command */ + +#define EC_CMD_I2C_PASSTHRU 0x009E + +/* Read data; if not present, message is a write */ +#define EC_I2C_FLAG_READ (1 << 15) + +/* Mask for address */ +#define EC_I2C_ADDR_MASK 0x3ff + +#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */ +#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */ + +/* Any error */ +#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT) + +struct __ec_align2 ec_params_i2c_passthru_msg { + uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */ + uint16_t len; /* Number of bytes to read or write */ +}; + +struct __ec_align2 ec_params_i2c_passthru { + uint8_t port; /* I2C port number */ + uint8_t num_msgs; /* Number of messages */ + struct ec_params_i2c_passthru_msg msg[]; + /* Data to write for all messages is concatenated here */ +}; + +struct __ec_align1 ec_response_i2c_passthru { + uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */ + uint8_t num_msgs; /* Number of messages processed */ + uint8_t data[]; /* Data read by messages concatenated here */ +}; + +/*****************************************************************************/ +/* Power button hang detect */ + +#define EC_CMD_HANG_DETECT 0x009F + +/* Reasons to start hang detection timer */ +/* Power button pressed */ +#define EC_HANG_START_ON_POWER_PRESS (1 << 0) + +/* Lid closed */ +#define EC_HANG_START_ON_LID_CLOSE (1 << 1) + + /* Lid opened */ +#define EC_HANG_START_ON_LID_OPEN (1 << 2) + +/* Start of AP S3->S0 transition (booting or resuming from suspend) */ +#define EC_HANG_START_ON_RESUME (1 << 3) + +/* Reasons to cancel hang detection */ + +/* Power button released */ +#define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8) + +/* Any host command from AP received */ +#define EC_HANG_STOP_ON_HOST_COMMAND (1 << 9) + +/* Stop on end of AP S0->S3 transition (suspending or shutting down) */ +#define EC_HANG_STOP_ON_SUSPEND (1 << 10) + +/* + * If this flag is set, all the other fields are ignored, and the hang detect + * timer is started. This provides the AP a way to start the hang timer + * without reconfiguring any of the other hang detect settings. Note that + * you must previously have configured the timeouts. + */ +#define EC_HANG_START_NOW (1 << 30) + +/* + * If this flag is set, all the other fields are ignored (including + * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer + * without reconfiguring any of the other hang detect settings. + */ +#define EC_HANG_STOP_NOW (1 << 31) + +struct __ec_align4 ec_params_hang_detect { + /* Flags; see EC_HANG_* */ + uint32_t flags; + + /* Timeout in msec before generating host event, if enabled */ + uint16_t host_event_timeout_msec; + + /* Timeout in msec before generating warm reboot, if enabled */ + uint16_t warm_reboot_timeout_msec; +}; + +/*****************************************************************************/ +/* Commands for battery charging */ + +/* + * This is the single catch-all host command to exchange data regarding the + * charge state machine (v2 and up). + */ +#define EC_CMD_CHARGE_STATE 0x00A0 + +/* Subcommands for this host command */ +enum charge_state_command { + CHARGE_STATE_CMD_GET_STATE, + CHARGE_STATE_CMD_GET_PARAM, + CHARGE_STATE_CMD_SET_PARAM, + CHARGE_STATE_NUM_CMDS +}; + +/* + * Known param numbers are defined here. Ranges are reserved for board-specific + * params, which are handled by the particular implementations. + */ +enum charge_state_params { + CS_PARAM_CHG_VOLTAGE, /* charger voltage limit */ + CS_PARAM_CHG_CURRENT, /* charger current limit */ + CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */ + CS_PARAM_CHG_STATUS, /* charger-specific status */ + CS_PARAM_CHG_OPTION, /* charger-specific options */ + CS_PARAM_LIMIT_POWER, /* + * Check if power is limited due to + * low battery and / or a weak external + * charger. READ ONLY. + */ + /* How many so far? */ + CS_NUM_BASE_PARAMS, + + /* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */ + CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000, + CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff, + + /* Other custom param ranges go here... */ +}; + +struct __ec_todo_packed ec_params_charge_state { + uint8_t cmd; /* enum charge_state_command */ + union { + struct __ec_align1 { + /* no args */ + } get_state; + + struct __ec_todo_unpacked { + uint32_t param; /* enum charge_state_param */ + } get_param; + + struct __ec_todo_unpacked { + uint32_t param; /* param to set */ + uint32_t value; /* value to set */ + } set_param; + }; +}; + +struct __ec_align4 ec_response_charge_state { + union { + struct __ec_align4 { + int ac; + int chg_voltage; + int chg_current; + int chg_input_current; + int batt_state_of_charge; + } get_state; + + struct __ec_align4 { + uint32_t value; + } get_param; + struct __ec_align4 { + /* no return values */ + } set_param; + }; +}; + + +/* + * Set maximum battery charging current. + */ +#define EC_CMD_CHARGE_CURRENT_LIMIT 0x00A1 + +struct __ec_align4 ec_params_current_limit { + uint32_t limit; /* in mA */ +}; + +/* + * Set maximum external voltage / current. + */ +#define EC_CMD_EXTERNAL_POWER_LIMIT 0x00A2 + +/* Command v0 is used only on Spring and is obsolete + unsupported */ +struct __ec_align2 ec_params_external_power_limit_v1 { + uint16_t current_lim; /* in mA, or EC_POWER_LIMIT_NONE to clear limit */ + uint16_t voltage_lim; /* in mV, or EC_POWER_LIMIT_NONE to clear limit */ +}; + +#define EC_POWER_LIMIT_NONE 0xffff + +/* + * Set maximum voltage & current of a dedicated charge port + */ +#define EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT 0x00A3 + +struct __ec_align2 ec_params_dedicated_charger_limit { + uint16_t current_lim; /* in mA */ + uint16_t voltage_lim; /* in mV */ +}; + +/*****************************************************************************/ +/* Hibernate/Deep Sleep Commands */ + +/* Set the delay before going into hibernation. */ +#define EC_CMD_HIBERNATION_DELAY 0x00A8 + +struct __ec_align4 ec_params_hibernation_delay { + /* + * Seconds to wait in G3 before hibernate. Pass in 0 to read the + * current settings without changing them. + */ + uint32_t seconds; +}; + +struct __ec_align4 ec_response_hibernation_delay { + /* + * The current time in seconds in which the system has been in the G3 + * state. This value is reset if the EC transitions out of G3. + */ + uint32_t time_g3; + + /* + * The current time remaining in seconds until the EC should hibernate. + * This value is also reset if the EC transitions out of G3. + */ + uint32_t time_remaining; + + /* + * The current time in seconds that the EC should wait in G3 before + * hibernating. + */ + uint32_t hibernate_delay; +}; + +/* Inform the EC when entering a sleep state */ +#define EC_CMD_HOST_SLEEP_EVENT 0x00A9 + +enum host_sleep_event { + HOST_SLEEP_EVENT_S3_SUSPEND = 1, + HOST_SLEEP_EVENT_S3_RESUME = 2, + HOST_SLEEP_EVENT_S0IX_SUSPEND = 3, + HOST_SLEEP_EVENT_S0IX_RESUME = 4 +}; + +struct __ec_align1 ec_params_host_sleep_event { + uint8_t sleep_event; +}; + +/*****************************************************************************/ +/* Device events */ +#define EC_CMD_DEVICE_EVENT 0x00AA + +enum ec_device_event { + EC_DEVICE_EVENT_TRACKPAD, + EC_DEVICE_EVENT_DSP, + EC_DEVICE_EVENT_WIFI, +}; + +enum ec_device_event_param { + /* Get and clear pending device events */ + EC_DEVICE_EVENT_PARAM_GET_CURRENT_EVENTS, + /* Get device event mask */ + EC_DEVICE_EVENT_PARAM_GET_ENABLED_EVENTS, + /* Set device event mask */ + EC_DEVICE_EVENT_PARAM_SET_ENABLED_EVENTS, +}; + +#define EC_DEVICE_EVENT_MASK(event_code) (1UL << (event_code % 32)) -/* Provide information about the matrix : number of rows and columns */ -#define EC_CMD_MKBP_INFO 0x61 +struct __ec_align_size1 ec_params_device_event { + uint32_t event_mask; + uint8_t param; +}; -struct ec_response_mkbp_info { - uint32_t rows; - uint32_t cols; - uint8_t switches; -} __packed; +struct __ec_align4 ec_response_device_event { + uint32_t event_mask; +}; -/* Simulate key press */ -#define EC_CMD_MKBP_SIMULATE_KEY 0x62 +/*****************************************************************************/ +/* Smart battery pass-through */ -struct ec_params_mkbp_simulate_key { - uint8_t col; - uint8_t row; - uint8_t pressed; -} __packed; +/* Get / Set 16-bit smart battery registers */ +#define EC_CMD_SB_READ_WORD 0x00B0 +#define EC_CMD_SB_WRITE_WORD 0x00B1 -/* Configure keyboard scanning */ -#define EC_CMD_MKBP_SET_CONFIG 0x64 -#define EC_CMD_MKBP_GET_CONFIG 0x65 +/* Get / Set string smart battery parameters + * formatted as SMBUS "block". + */ +#define EC_CMD_SB_READ_BLOCK 0x00B2 +#define EC_CMD_SB_WRITE_BLOCK 0x00B3 -/* flags */ -enum mkbp_config_flags { - EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */ +struct __ec_align1 ec_params_sb_rd { + uint8_t reg; }; -enum mkbp_config_valid { - EC_MKBP_VALID_SCAN_PERIOD = 1 << 0, - EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1, - EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3, - EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4, - EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5, - EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6, - EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7, +struct __ec_align2 ec_response_sb_rd_word { + uint16_t value; }; -/* Configuration for our key scanning algorithm */ -struct ec_mkbp_config { - uint32_t valid_mask; /* valid fields */ - uint8_t flags; /* some flags (enum mkbp_config_flags) */ - uint8_t valid_flags; /* which flags are valid */ - uint16_t scan_period_us; /* period between start of scans */ - /* revert to interrupt mode after no activity for this long */ - uint32_t poll_timeout_us; - /* - * minimum post-scan relax time. Once we finish a scan we check - * the time until we are due to start the next one. If this time is - * shorter this field, we use this instead. - */ - uint16_t min_post_scan_delay_us; - /* delay between setting up output and waiting for it to settle */ - uint16_t output_settle_us; - uint16_t debounce_down_us; /* time for debounce on key down */ - uint16_t debounce_up_us; /* time for debounce on key up */ - /* maximum depth to allow for fifo (0 = no keyscan output) */ - uint8_t fifo_max_depth; -} __packed; +struct __ec_align1 ec_params_sb_wr_word { + uint8_t reg; + uint16_t value; +}; -struct ec_params_mkbp_set_config { - struct ec_mkbp_config config; -} __packed; +struct __ec_align1 ec_response_sb_rd_block { + uint8_t data[32]; +}; -struct ec_response_mkbp_get_config { - struct ec_mkbp_config config; -} __packed; +struct __ec_align1 ec_params_sb_wr_block { + uint8_t reg; + uint16_t data[32]; +}; -/* Run the key scan emulation */ -#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66 +/*****************************************************************************/ +/* Battery vendor parameters + * + * Get or set vendor-specific parameters in the battery. Implementations may + * differ between boards or batteries. On a set operation, the response + * contains the actual value set, which may be rounded or clipped from the + * requested value. + */ -enum ec_keyscan_seq_cmd { - EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */ - EC_KEYSCAN_SEQ_CLEAR = 1, /* Clear sequence */ - EC_KEYSCAN_SEQ_ADD = 2, /* Add item to sequence */ - EC_KEYSCAN_SEQ_START = 3, /* Start running sequence */ - EC_KEYSCAN_SEQ_COLLECT = 4, /* Collect sequence summary data */ +#define EC_CMD_BATTERY_VENDOR_PARAM 0x00B4 + +enum ec_battery_vendor_param_mode { + BATTERY_VENDOR_PARAM_MODE_GET = 0, + BATTERY_VENDOR_PARAM_MODE_SET, }; -enum ec_collect_flags { - /* - * Indicates this scan was processed by the EC. Due to timing, some - * scans may be skipped. - */ - EC_KEYSCAN_SEQ_FLAG_DONE = 1 << 0, +struct __ec_align_size1 ec_params_battery_vendor_param { + uint32_t param; + uint32_t value; + uint8_t mode; }; -struct ec_collect_item { - uint8_t flags; /* some flags (enum ec_collect_flags) */ +struct __ec_align4 ec_response_battery_vendor_param { + uint32_t value; }; -struct ec_params_keyscan_seq_ctrl { - uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */ +/*****************************************************************************/ +/* + * Smart Battery Firmware Update Commands + */ +#define EC_CMD_SB_FW_UPDATE 0x00B5 + +enum ec_sb_fw_update_subcmd { + EC_SB_FW_UPDATE_PREPARE = 0x0, + EC_SB_FW_UPDATE_INFO = 0x1, /*query sb info */ + EC_SB_FW_UPDATE_BEGIN = 0x2, /*check if protected */ + EC_SB_FW_UPDATE_WRITE = 0x3, /*check if protected */ + EC_SB_FW_UPDATE_END = 0x4, + EC_SB_FW_UPDATE_STATUS = 0x5, + EC_SB_FW_UPDATE_PROTECT = 0x6, + EC_SB_FW_UPDATE_MAX = 0x7, +}; + +#define SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE 32 +#define SB_FW_UPDATE_CMD_STATUS_SIZE 2 +#define SB_FW_UPDATE_CMD_INFO_SIZE 8 + +struct __ec_align4 ec_sb_fw_update_header { + uint16_t subcmd; /* enum ec_sb_fw_update_subcmd */ + uint16_t fw_id; /* firmware id */ +}; + +struct __ec_align4 ec_params_sb_fw_update { + struct ec_sb_fw_update_header hdr; union { - struct { - uint8_t active; /* still active */ - uint8_t num_items; /* number of items */ - /* Current item being presented */ - uint8_t cur_item; - } status; - struct { - /* - * Absolute time for this scan, measured from the - * start of the sequence. - */ - uint32_t time_us; - uint8_t scan[0]; /* keyscan data */ - } add; - struct { - uint8_t start_item; /* First item to return */ - uint8_t num_items; /* Number of items to return */ - } collect; + /* EC_SB_FW_UPDATE_PREPARE = 0x0 */ + /* EC_SB_FW_UPDATE_INFO = 0x1 */ + /* EC_SB_FW_UPDATE_BEGIN = 0x2 */ + /* EC_SB_FW_UPDATE_END = 0x4 */ + /* EC_SB_FW_UPDATE_STATUS = 0x5 */ + /* EC_SB_FW_UPDATE_PROTECT = 0x6 */ + struct __ec_align4 { + /* no args */ + } dummy; + + /* EC_SB_FW_UPDATE_WRITE = 0x3 */ + struct __ec_align4 { + uint8_t data[SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE]; + } write; }; -} __packed; +}; -struct ec_result_keyscan_seq_ctrl { +struct __ec_align1 ec_response_sb_fw_update { union { - struct { - uint8_t num_items; /* Number of items */ - /* Data for each item */ - struct ec_collect_item item[0]; - } collect; + /* EC_SB_FW_UPDATE_INFO = 0x1 */ + struct __ec_align1 { + uint8_t data[SB_FW_UPDATE_CMD_INFO_SIZE]; + } info; + + /* EC_SB_FW_UPDATE_STATUS = 0x5 */ + struct __ec_align1 { + uint8_t data[SB_FW_UPDATE_CMD_STATUS_SIZE]; + } status; }; -} __packed; +}; + +/* + * Entering Verified Boot Mode Command + * Default mode is VBOOT_MODE_NORMAL if EC did not receive this command. + * Valid Modes are: normal, developer, and recovery. + */ +#define EC_CMD_ENTERING_MODE 0x00B6 + +struct __ec_align4 ec_params_entering_mode { + int vboot_mode; +}; + +#define VBOOT_MODE_NORMAL 0 +#define VBOOT_MODE_DEVELOPER 1 +#define VBOOT_MODE_RECOVERY 2 /*****************************************************************************/ -/* Temperature sensor commands */ +/* + * I2C passthru protection command: Protects I2C tunnels against access on + * certain addresses (board-specific). + */ +#define EC_CMD_I2C_PASSTHRU_PROTECT 0x00B7 -/* Read temperature sensor info */ -#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70 +enum ec_i2c_passthru_protect_subcmd { + EC_CMD_I2C_PASSTHRU_PROTECT_STATUS = 0x0, + EC_CMD_I2C_PASSTHRU_PROTECT_ENABLE = 0x1, +}; -struct ec_params_temp_sensor_get_info { - uint8_t id; -} __packed; +struct __ec_align1 ec_params_i2c_passthru_protect { + uint8_t subcmd; + uint8_t port; /* I2C port number */ +}; -struct ec_response_temp_sensor_get_info { - char sensor_name[32]; - uint8_t sensor_type; -} __packed; +struct __ec_align1 ec_response_i2c_passthru_protect { + uint8_t status; /* Status flags (0: unlocked, 1: locked) */ +}; /*****************************************************************************/ +/* System commands */ /* - * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI - * commands accidentally sent to the wrong interface. See the ACPI section - * below. + * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't + * necessarily reboot the EC. Rename to "image" or something similar? */ +#define EC_CMD_REBOOT_EC 0x00D2 -/*****************************************************************************/ -/* Host event commands */ +/* Command */ +enum ec_reboot_cmd { + EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */ + EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */ + EC_REBOOT_JUMP_RW = 2, /* Jump to RW without rebooting */ + /* (command 3 was jump to RW-B) */ + EC_REBOOT_COLD = 4, /* Cold-reboot */ + EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */ + EC_REBOOT_HIBERNATE = 6, /* Hibernate EC */ + EC_REBOOT_HIBERNATE_CLEAR_AP_OFF = 7, /* and clears AP_OFF flag */ +}; + +/* Flags for ec_params_reboot_ec.reboot_flags */ +#define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */ +#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) /* Reboot after AP shutdown */ +#define EC_REBOOT_FLAG_SWITCH_RW_SLOT (1 << 2) /* Switch RW slot */ + +struct __ec_align1 ec_params_reboot_ec { + uint8_t cmd; /* enum ec_reboot_cmd */ + uint8_t flags; /* See EC_REBOOT_FLAG_* */ +}; /* - * Host event mask params and response structures, shared by all of the host - * event commands below. + * Get information on last EC panic. + * + * Returns variable-length platform-dependent panic information. See panic.h + * for details. */ -struct ec_params_host_event_mask { - uint32_t mask; -} __packed; +#define EC_CMD_GET_PANIC_INFO 0x00D3 -struct ec_response_host_event_mask { - uint32_t mask; -} __packed; +/*****************************************************************************/ +/* + * Special commands + * + * These do not follow the normal rules for commands. See each command for + * details. + */ -/* These all use ec_response_host_event_mask */ -#define EC_CMD_HOST_EVENT_GET_B 0x87 -#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x88 -#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x89 -#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d +/* + * Reboot NOW + * + * This command will work even when the EC LPC interface is busy, because the + * reboot command is processed at interrupt level. Note that when the EC + * reboots, the host will reboot too, so there is no response to this command. + * + * Use EC_CMD_REBOOT_EC to reboot the EC more politely. + */ +#define EC_CMD_REBOOT 0x00D1 /* Think "die" */ -/* These all use ec_params_host_event_mask */ -#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x8a -#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x8b -#define EC_CMD_HOST_EVENT_CLEAR 0x8c -#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e -#define EC_CMD_HOST_EVENT_CLEAR_B 0x8f +/* + * Resend last response (not supported on LPC). + * + * Returns EC_RES_UNAVAILABLE if there is no response available - for example, + * there was no previous command, or the previous command's response was too + * big to save. + */ +#define EC_CMD_RESEND_RESPONSE 0x00DB + +/* + * This header byte on a command indicate version 0. Any header byte less + * than this means that we are talking to an old EC which doesn't support + * versioning. In that case, we assume version 0. + * + * Header bytes greater than this indicate a later version. For example, + * EC_CMD_VERSION0 + 1 means we are using version 1. + * + * The old EC interface must not use commands 0xdc or higher. + */ +#define EC_CMD_VERSION0 0x00DC /*****************************************************************************/ -/* Switch commands */ +/* + * PD commands + * + * These commands are for PD MCU communication. + */ -/* Enable/disable LCD backlight */ -#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90 +/* EC to PD MCU exchange status command */ +#define EC_CMD_PD_EXCHANGE_STATUS 0x0100 +#define EC_VER_PD_EXCHANGE_STATUS 2 -struct ec_params_switch_enable_backlight { - uint8_t enabled; -} __packed; +enum pd_charge_state { + PD_CHARGE_NO_CHANGE = 0, /* Don't change charge state */ + PD_CHARGE_NONE, /* No charging allowed */ + PD_CHARGE_5V, /* 5V charging only */ + PD_CHARGE_MAX /* Charge at max voltage */ +}; -/* Enable/disable WLAN/Bluetooth */ -#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91 +/* Status of EC being sent to PD */ +#define EC_STATUS_HIBERNATING (1 << 0) + +struct __ec_align1 ec_params_pd_status { + uint8_t status; /* EC status */ + int8_t batt_soc; /* battery state of charge */ + uint8_t charge_state; /* charging state (from enum pd_charge_state) */ +}; + +/* Status of PD being sent back to EC */ +#define PD_STATUS_HOST_EVENT (1 << 0) /* Forward host event to AP */ +#define PD_STATUS_IN_RW (1 << 1) /* Running RW image */ +#define PD_STATUS_JUMPED_TO_IMAGE (1 << 2) /* Current image was jumped to */ +#define PD_STATUS_TCPC_ALERT_0 (1 << 3) /* Alert active in port 0 TCPC */ +#define PD_STATUS_TCPC_ALERT_1 (1 << 4) /* Alert active in port 1 TCPC */ +#define PD_STATUS_TCPC_ALERT_2 (1 << 5) /* Alert active in port 2 TCPC */ +#define PD_STATUS_TCPC_ALERT_3 (1 << 6) /* Alert active in port 3 TCPC */ +#define PD_STATUS_EC_INT_ACTIVE (PD_STATUS_TCPC_ALERT_0 | \ + PD_STATUS_TCPC_ALERT_1 | \ + PD_STATUS_HOST_EVENT) +struct __ec_align_size1 ec_response_pd_status { + uint32_t curr_lim_ma; /* input current limit */ + uint16_t status; /* PD MCU status */ + int8_t active_charge_port; /* active charging port */ +}; + +/* AP to PD MCU host event status command, cleared on read */ +#define EC_CMD_PD_HOST_EVENT_STATUS 0x0104 + +/* PD MCU host event status bits */ +#define PD_EVENT_UPDATE_DEVICE (1 << 0) +#define PD_EVENT_POWER_CHANGE (1 << 1) +#define PD_EVENT_IDENTITY_RECEIVED (1 << 2) +#define PD_EVENT_DATA_SWAP (1 << 3) +struct __ec_align4 ec_response_host_event_status { + uint32_t status; /* PD MCU host event status */ +}; + +/* Set USB type-C port role and muxes */ +#define EC_CMD_USB_PD_CONTROL 0x0101 + +enum usb_pd_control_role { + USB_PD_CTRL_ROLE_NO_CHANGE = 0, + USB_PD_CTRL_ROLE_TOGGLE_ON = 1, /* == AUTO */ + USB_PD_CTRL_ROLE_TOGGLE_OFF = 2, + USB_PD_CTRL_ROLE_FORCE_SINK = 3, + USB_PD_CTRL_ROLE_FORCE_SOURCE = 4, + USB_PD_CTRL_ROLE_COUNT +}; + +enum usb_pd_control_mux { + USB_PD_CTRL_MUX_NO_CHANGE = 0, + USB_PD_CTRL_MUX_NONE = 1, + USB_PD_CTRL_MUX_USB = 2, + USB_PD_CTRL_MUX_DP = 3, + USB_PD_CTRL_MUX_DOCK = 4, + USB_PD_CTRL_MUX_AUTO = 5, + USB_PD_CTRL_MUX_COUNT +}; + +enum usb_pd_control_swap { + USB_PD_CTRL_SWAP_NONE = 0, + USB_PD_CTRL_SWAP_DATA = 1, + USB_PD_CTRL_SWAP_POWER = 2, + USB_PD_CTRL_SWAP_VCONN = 3, + USB_PD_CTRL_SWAP_COUNT +}; + +struct __ec_align1 ec_params_usb_pd_control { + uint8_t port; + uint8_t role; + uint8_t mux; + uint8_t swap; +}; -struct ec_params_switch_enable_wireless { +#define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */ +#define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */ +#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */ + +#define PD_CTRL_RESP_ROLE_POWER (1 << 0) /* 0=SNK/1=SRC */ +#define PD_CTRL_RESP_ROLE_DATA (1 << 1) /* 0=UFP/1=DFP */ +#define PD_CTRL_RESP_ROLE_VCONN (1 << 2) /* Vconn status */ +#define PD_CTRL_RESP_ROLE_DR_POWER (1 << 3) /* Partner is dualrole power */ +#define PD_CTRL_RESP_ROLE_DR_DATA (1 << 4) /* Partner is dualrole data */ +#define PD_CTRL_RESP_ROLE_USB_COMM (1 << 5) /* Partner USB comm capable */ +#define PD_CTRL_RESP_ROLE_EXT_POWERED (1 << 6) /* Partner externally powerd */ + +struct __ec_align1 ec_response_usb_pd_control { uint8_t enabled; -} __packed; + uint8_t role; + uint8_t polarity; + uint8_t state; +}; -/*****************************************************************************/ -/* GPIO commands. Only available on EC if write protect has been disabled. */ +struct __ec_align1 ec_response_usb_pd_control_v1 { + uint8_t enabled; + uint8_t role; + uint8_t polarity; + char state[32]; +}; -/* Set GPIO output value */ -#define EC_CMD_GPIO_SET 0x92 +#define EC_CMD_USB_PD_PORTS 0x0102 -struct ec_params_gpio_set { - char name[32]; - uint8_t val; -} __packed; +/* Maximum number of PD ports on a device, num_ports will be <= this */ +#define EC_USB_PD_MAX_PORTS 8 -/* Get GPIO value */ -#define EC_CMD_GPIO_GET 0x93 +struct __ec_align1 ec_response_usb_pd_ports { + uint8_t num_ports; +}; -struct ec_params_gpio_get { - char name[32]; -} __packed; -struct ec_response_gpio_get { - uint8_t val; -} __packed; +#define EC_CMD_USB_PD_POWER_INFO 0x0103 + +#define PD_POWER_CHARGING_PORT 0xff +struct __ec_align1 ec_params_usb_pd_power_info { + uint8_t port; +}; + +enum usb_chg_type { + USB_CHG_TYPE_NONE, + USB_CHG_TYPE_PD, + USB_CHG_TYPE_C, + USB_CHG_TYPE_PROPRIETARY, + USB_CHG_TYPE_BC12_DCP, + USB_CHG_TYPE_BC12_CDP, + USB_CHG_TYPE_BC12_SDP, + USB_CHG_TYPE_OTHER, + USB_CHG_TYPE_VBUS, + USB_CHG_TYPE_UNKNOWN, +}; +enum usb_power_roles { + USB_PD_PORT_POWER_DISCONNECTED, + USB_PD_PORT_POWER_SOURCE, + USB_PD_PORT_POWER_SINK, + USB_PD_PORT_POWER_SINK_NOT_CHARGING, +}; + +struct __ec_align2 usb_chg_measures { + uint16_t voltage_max; + uint16_t voltage_now; + uint16_t current_max; + uint16_t current_lim; +}; + +struct __ec_align4 ec_response_usb_pd_power_info { + uint8_t role; + uint8_t type; + uint8_t dualrole; + uint8_t reserved1; + struct usb_chg_measures meas; + uint32_t max_power; +}; + +/* Write USB-PD device FW */ +#define EC_CMD_USB_PD_FW_UPDATE 0x0110 + +enum usb_pd_fw_update_cmds { + USB_PD_FW_REBOOT, + USB_PD_FW_FLASH_ERASE, + USB_PD_FW_FLASH_WRITE, + USB_PD_FW_ERASE_SIG, +}; + +struct __ec_align4 ec_params_usb_pd_fw_update { + uint16_t dev_id; + uint8_t cmd; + uint8_t port; + uint32_t size; /* Size to write in bytes */ + /* Followed by data to write */ +}; -/*****************************************************************************/ -/* I2C commands. Only available when flash write protect is unlocked. */ +/* Write USB-PD Accessory RW_HASH table entry */ +#define EC_CMD_USB_PD_RW_HASH_ENTRY 0x0111 +/* RW hash is first 20 bytes of SHA-256 of RW section */ +#define PD_RW_HASH_SIZE 20 +struct __ec_align1 ec_params_usb_pd_rw_hash_entry { + uint16_t dev_id; + uint8_t dev_rw_hash[PD_RW_HASH_SIZE]; + uint8_t reserved; /* For alignment of current_image + * TODO(rspangler) but it's not aligned! + * Should have been reserved[2]. */ + uint32_t current_image; /* One of ec_current_image */ +}; -/* Read I2C bus */ -#define EC_CMD_I2C_READ 0x94 +/* Read USB-PD Accessory info */ +#define EC_CMD_USB_PD_DEV_INFO 0x0112 -struct ec_params_i2c_read { - uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ - uint8_t read_size; /* Either 8 or 16. */ +struct __ec_align1 ec_params_usb_pd_info_request { uint8_t port; - uint8_t offset; -} __packed; -struct ec_response_i2c_read { - uint16_t data; -} __packed; +}; -/* Write I2C bus */ -#define EC_CMD_I2C_WRITE 0x95 +/* Read USB-PD Device discovery info */ +#define EC_CMD_USB_PD_DISCOVERY 0x0113 +struct __ec_align_size1 ec_params_usb_pd_discovery_entry { + uint16_t vid; /* USB-IF VID */ + uint16_t pid; /* USB-IF PID */ + uint8_t ptype; /* product type (hub,periph,cable,ama) */ +}; -struct ec_params_i2c_write { - uint16_t data; - uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ - uint8_t write_size; /* Either 8 or 16. */ - uint8_t port; - uint8_t offset; -} __packed; +/* Override default charge behavior */ +#define EC_CMD_PD_CHARGE_PORT_OVERRIDE 0x0114 -/*****************************************************************************/ -/* Charge state commands. Only available when flash write protect unlocked. */ +/* Negative port parameters have special meaning */ +enum usb_pd_override_ports { + OVERRIDE_DONT_CHARGE = -2, + OVERRIDE_OFF = -1, + /* [0, CONFIG_USB_PD_PORT_COUNT): Port# */ +}; -/* Force charge state machine to stop in idle mode */ -#define EC_CMD_CHARGE_FORCE_IDLE 0x96 +struct __ec_align2 ec_params_charge_port_override { + int16_t override_port; /* Override port# */ +}; -struct ec_params_force_idle { - uint8_t enabled; -} __packed; +/* Read (and delete) one entry of PD event log */ +#define EC_CMD_PD_GET_LOG_ENTRY 0x0115 -/*****************************************************************************/ -/* Console commands. Only available when flash write protect is unlocked. */ +struct __ec_align4 ec_response_pd_log { + uint32_t timestamp; /* relative timestamp in milliseconds */ + uint8_t type; /* event type : see PD_EVENT_xx below */ + uint8_t size_port; /* [7:5] port number [4:0] payload size in bytes */ + uint16_t data; /* type-defined data payload */ + uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */ +}; -/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */ -#define EC_CMD_CONSOLE_SNAPSHOT 0x97 + +/* The timestamp is the microsecond counter shifted to get about a ms. */ +#define PD_LOG_TIMESTAMP_SHIFT 10 /* 1 LSB = 1024us */ + +#define PD_LOG_SIZE_MASK 0x1f +#define PD_LOG_PORT_MASK 0xe0 +#define PD_LOG_PORT_SHIFT 5 +#define PD_LOG_PORT_SIZE(port, size) (((port) << PD_LOG_PORT_SHIFT) | \ + ((size) & PD_LOG_SIZE_MASK)) +#define PD_LOG_PORT(size_port) ((size_port) >> PD_LOG_PORT_SHIFT) +#define PD_LOG_SIZE(size_port) ((size_port) & PD_LOG_SIZE_MASK) + +/* PD event log : entry types */ +/* PD MCU events */ +#define PD_EVENT_MCU_BASE 0x00 +#define PD_EVENT_MCU_CHARGE (PD_EVENT_MCU_BASE+0) +#define PD_EVENT_MCU_CONNECT (PD_EVENT_MCU_BASE+1) +/* Reserved for custom board event */ +#define PD_EVENT_MCU_BOARD_CUSTOM (PD_EVENT_MCU_BASE+2) +/* PD generic accessory events */ +#define PD_EVENT_ACC_BASE 0x20 +#define PD_EVENT_ACC_RW_FAIL (PD_EVENT_ACC_BASE+0) +#define PD_EVENT_ACC_RW_ERASE (PD_EVENT_ACC_BASE+1) +/* PD power supply events */ +#define PD_EVENT_PS_BASE 0x40 +#define PD_EVENT_PS_FAULT (PD_EVENT_PS_BASE+0) +/* PD video dongles events */ +#define PD_EVENT_VIDEO_BASE 0x60 +#define PD_EVENT_VIDEO_DP_MODE (PD_EVENT_VIDEO_BASE+0) +#define PD_EVENT_VIDEO_CODEC (PD_EVENT_VIDEO_BASE+1) +/* Returned in the "type" field, when there is no entry available */ +#define PD_EVENT_NO_ENTRY 0xff /* - * Read next chunk of data from saved snapshot. - * - * Response is null-terminated string. Empty string, if there is no more - * remaining output. + * PD_EVENT_MCU_CHARGE event definition : + * the payload is "struct usb_chg_measures" + * the data field contains the port state flags as defined below : */ -#define EC_CMD_CONSOLE_READ 0x98 - -/*****************************************************************************/ +/* Port partner is a dual role device */ +#define CHARGE_FLAGS_DUAL_ROLE (1 << 15) +/* Port is the pending override port */ +#define CHARGE_FLAGS_DELAYED_OVERRIDE (1 << 14) +/* Port is the override port */ +#define CHARGE_FLAGS_OVERRIDE (1 << 13) +/* Charger type */ +#define CHARGE_FLAGS_TYPE_SHIFT 3 +#define CHARGE_FLAGS_TYPE_MASK (0xf << CHARGE_FLAGS_TYPE_SHIFT) +/* Power delivery role */ +#define CHARGE_FLAGS_ROLE_MASK (7 << 0) /* - * Cut off battery power output if the battery supports. - * - * For unsupported battery, just don't implement this command and lets EC - * return EC_RES_INVALID_COMMAND. + * PD_EVENT_PS_FAULT data field flags definition : */ -#define EC_CMD_BATTERY_CUT_OFF 0x99 - -/*****************************************************************************/ -/* USB port mux control. */ +#define PS_FAULT_OCP 1 +#define PS_FAULT_FAST_OCP 2 +#define PS_FAULT_OVP 3 +#define PS_FAULT_DISCH 4 /* - * Switch USB mux or return to automatic switching. + * PD_EVENT_VIDEO_CODEC payload is "struct mcdp_info". */ -#define EC_CMD_USB_MUX 0x9a +struct __ec_align4 mcdp_version { + uint8_t major; + uint8_t minor; + uint16_t build; +}; -struct ec_params_usb_mux { - uint8_t mux; -} __packed; +struct __ec_align4 mcdp_info { + uint8_t family[2]; + uint8_t chipid[2]; + struct mcdp_version irom; + struct mcdp_version fw; +}; -/*****************************************************************************/ -/* LDOs / FETs control. */ +/* struct mcdp_info field decoding */ +#define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1]) +#define MCDP_FAMILY(family) ((family[0] << 8) | family[1]) -enum ec_ldo_state { - EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */ - EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */ +/* Get/Set USB-PD Alternate mode info */ +#define EC_CMD_USB_PD_GET_AMODE 0x0116 +struct __ec_align_size1 ec_params_usb_pd_get_mode_request { + uint16_t svid_idx; /* SVID index to get */ + uint8_t port; /* port */ }; -/* - * Switch on/off a LDO. - */ -#define EC_CMD_LDO_SET 0x9b +struct __ec_align4 ec_params_usb_pd_get_mode_response { + uint16_t svid; /* SVID */ + uint16_t opos; /* Object Position */ + uint32_t vdo[6]; /* Mode VDOs */ +}; -struct ec_params_ldo_set { - uint8_t index; - uint8_t state; -} __packed; +#define EC_CMD_USB_PD_SET_AMODE 0x0117 -/* - * Get LDO state. - */ -#define EC_CMD_LDO_GET 0x9c +enum pd_mode_cmd { + PD_EXIT_MODE = 0, + PD_ENTER_MODE = 1, + /* Not a command. Do NOT remove. */ + PD_MODE_CMD_COUNT, +}; -struct ec_params_ldo_get { - uint8_t index; -} __packed; +struct __ec_align4 ec_params_usb_pd_set_mode_request { + uint32_t cmd; /* enum pd_mode_cmd */ + uint16_t svid; /* SVID to set */ + uint8_t opos; /* Object Position */ + uint8_t port; /* port */ +}; -struct ec_response_ldo_get { - uint8_t state; -} __packed; +/* Ask the PD MCU to record a log of a requested type */ +#define EC_CMD_PD_WRITE_LOG_ENTRY 0x0118 -/*****************************************************************************/ -/* Power info. */ +struct __ec_align1 ec_params_pd_write_log_entry { + uint8_t type; /* event type : see PD_EVENT_xx above */ + uint8_t port; /* port#, or 0 for events unrelated to a given port */ +}; -/* - * Get power info. - */ -#define EC_CMD_POWER_INFO 0x9d -struct ec_response_power_info { - uint32_t usb_dev_type; - uint16_t voltage_ac; - uint16_t voltage_system; - uint16_t current_system; - uint16_t usb_current_limit; -} __packed; +/* Control USB-PD chip */ +#define EC_CMD_PD_CONTROL 0x0119 -/*****************************************************************************/ -/* I2C passthru command */ +enum ec_pd_control_cmd { + PD_SUSPEND = 0, /* Suspend the PD chip (EC: stop talking to PD) */ + PD_RESUME, /* Resume the PD chip (EC: start talking to PD) */ + PD_RESET, /* Force reset the PD chip */ + PD_CONTROL_DISABLE /* Disable further calls to this command */ +}; -#define EC_CMD_I2C_PASSTHRU 0x9e +struct __ec_align1 ec_params_pd_control { + uint8_t chip; /* chip id (should be 0) */ + uint8_t subcmd; +}; -/* Slave address is 10 (not 7) bit */ -#define EC_I2C_FLAG_10BIT (1 << 16) +/* Get info about USB-C SS muxes */ +#define EC_CMD_USB_PD_MUX_INFO 0x011A -/* Read data; if not present, message is a write */ -#define EC_I2C_FLAG_READ (1 << 15) +struct __ec_align1 ec_params_usb_pd_mux_info { + uint8_t port; /* USB-C port number */ +}; -/* Mask for address */ -#define EC_I2C_ADDR_MASK 0x3ff +/* Flags representing mux state */ +#define USB_PD_MUX_USB_ENABLED (1 << 0) +#define USB_PD_MUX_DP_ENABLED (1 << 1) +#define USB_PD_MUX_POLARITY_INVERTED (1 << 2) +#define USB_PD_MUX_HPD_IRQ (1 << 3) -#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */ -#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */ +struct __ec_align1 ec_response_usb_pd_mux_info { + uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */ +}; -/* Any error */ -#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT) +#define EC_CMD_PD_CHIP_INFO 0x011B -struct ec_params_i2c_passthru_msg { - uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */ - uint16_t len; /* Number of bytes to read or write */ -} __packed; +struct __ec_align1 ec_params_pd_chip_info { + uint8_t port; /* USB-C port number */ + uint8_t renew; /* Force renewal */ +}; -struct ec_params_i2c_passthru { - uint8_t port; /* I2C port number */ - uint8_t num_msgs; /* Number of messages */ - struct ec_params_i2c_passthru_msg msg[]; - /* Data to write for all messages is concatenated here */ -} __packed; +struct __ec_align2 ec_response_pd_chip_info { + uint16_t vendor_id; + uint16_t product_id; + uint16_t device_id; + union { + uint8_t fw_version_string[8]; + uint64_t fw_version_number; + }; +}; -struct ec_response_i2c_passthru { - uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */ - uint8_t num_msgs; /* Number of messages processed */ - uint8_t data[]; /* Data read by messages concatenated here */ -} __packed; +/* Run RW signature verification and get status */ +#define EC_CMD_RWSIG_CHECK_STATUS 0x011C + +struct __ec_align4 ec_response_rwsig_check_status { + uint32_t status; +}; +/* For controlling RWSIG task */ +#define EC_CMD_RWSIG_ACTION 0x011D -/*****************************************************************************/ -/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */ +enum rwsig_action { + RWSIG_ACTION_ABORT = 0, /* Abort RWSIG and prevent jumping */ + RWSIG_ACTION_CONTINUE = 1, /* Jump to RW immediately */ +}; + +struct __ec_align4 ec_params_rwsig_action { + uint32_t action; +}; + +/* Run verification on a slot */ +#define EC_CMD_EFS_VERIFY 0x011E + +struct __ec_align1 ec_params_efs_verify { + uint8_t region; /* enum ec_flash_region */ +}; /* - * Dump charge state machine context. - * - * Response is a binary dump of charge state machine context. + * Retrieve info from Cros Board Info store. Response is based on the data + * type. Integers return a uint32. Strings return a string, using the response + * size to determine how big it is. + */ +#define EC_CMD_GET_CROS_BOARD_INFO 0x011F +/* + * Write info into Cros Board Info on EEPROM. Write fails if the board has + * hardware write-protect enabled. */ -#define EC_CMD_CHARGE_DUMP 0xa0 +#define EC_CMD_SET_CROS_BOARD_INFO 0x0120 + +enum cbi_data_tag { + CBI_TAG_BOARD_VERSION = 0, /* uint16_t or uint8_t[] = {minor,major} */ + CBI_TAG_OEM_ID = 1, /* uint8_t */ + CBI_TAG_SKU_ID = 2, /* uint8_t */ + CBI_TAG_COUNT, +}; /* - * Set maximum battery charging current. + * Flags to control read operation + * + * RELOAD: Invalidate cache and read data from EEPROM. Useful to verify + * write was successful without reboot. */ -#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1 +#define CBI_GET_RELOAD (1 << 0) -struct ec_params_current_limit { - uint32_t limit; /* in mA */ -} __packed; +struct __ec_align4 ec_params_get_cbi { + uint32_t type; /* enum cbi_data_tag */ + uint32_t flag; /* CBI_GET_* */ +}; /* - * Set maximum external power current. + * Flags to control write behavior. + * + * NO_SYNC: Makes EC update data in RAM but skip writing to EEPROM. It's + * useful when writing multiple fields in a row. + * INIT: Needs to be set when creating a new CBI from scratch. All fields + * will be initialized to zero first. */ -#define EC_CMD_EXT_POWER_CURRENT_LIMIT 0xa2 +#define CBI_SET_NO_SYNC (1 << 0) +#define CBI_SET_INIT (1 << 1) + +struct __ec_align1 ec_params_set_cbi { + uint32_t tag; /* enum cbi_data_tag */ + uint32_t flag; /* CBI_SET_* */ + uint32_t size; /* Data size */ + uint8_t data[]; /* For string and raw data */ +}; -struct ec_params_ext_power_current_limit { - uint32_t limit; /* in mA */ -} __packed; +/*****************************************************************************/ +/* The command range 0x200-0x2FF is reserved for Rotor. */ /*****************************************************************************/ -/* Smart battery pass-through */ +/* + * Reserve a range of host commands for the CR51 firmware. + */ +#define EC_CMD_CR51_BASE 0x0300 +#define EC_CMD_CR51_LAST 0x03FF -/* Get / Set 16-bit smart battery registers */ -#define EC_CMD_SB_READ_WORD 0xb0 -#define EC_CMD_SB_WRITE_WORD 0xb1 +/*****************************************************************************/ +/* Fingerprint MCU commands: range 0x0400-0x040x */ -/* Get / Set string smart battery parameters - * formatted as SMBUS "block". - */ -#define EC_CMD_SB_READ_BLOCK 0xb2 -#define EC_CMD_SB_WRITE_BLOCK 0xb3 +/* Fingerprint SPI sensor passthru command: prototyping ONLY */ +#define EC_CMD_FP_PASSTHRU 0x0400 -struct ec_params_sb_rd { - uint8_t reg; -} __packed; +#define EC_FP_FLAG_NOT_COMPLETE 0x1 -struct ec_response_sb_rd_word { - uint16_t value; -} __packed; +struct __ec_align2 ec_params_fp_passthru { + uint16_t len; /* Number of bytes to write then read */ + uint16_t flags; /* EC_FP_FLAG_xxx */ + uint8_t data[]; /* Data to send */ +}; -struct ec_params_sb_wr_word { - uint8_t reg; - uint16_t value; -} __packed; +/* Fingerprint sensor configuration command: prototyping ONLY */ +#define EC_CMD_FP_SENSOR_CONFIG 0x0401 -struct ec_response_sb_rd_block { - uint8_t data[32]; -} __packed; +#define EC_FP_SENSOR_CONFIG_MAX_REGS 16 -struct ec_params_sb_wr_block { - uint8_t reg; - uint16_t data[32]; -} __packed; +struct __ec_align2 ec_params_fp_sensor_config { + uint8_t count; /* Number of setup registers */ + /* + * the value to send to each of the 'count' setup registers + * is stored in the 'data' array for 'len' bytes just after + * the previous one. + */ + uint8_t len[EC_FP_SENSOR_CONFIG_MAX_REGS]; + uint8_t data[]; +}; -/* - * Entering Verified Boot Mode Command - * Default mode is VBOOT_MODE_NORMAL if EC did not receive this command. - * Valid Modes are: normal, developer, and recovery. - */ -#define EC_CMD_ENTERING_MODE 0xb6 +/* Configure the Fingerprint MCU behavior */ +#define EC_CMD_FP_MODE 0x0402 + +/* Put the sensor in its lowest power mode */ +#define FP_MODE_DEEPSLEEP (1<<0) +/* Wait to see a finger on the sensor */ +#define FP_MODE_FINGER_DOWN (1<<1) +/* Poll until the finger has left the sensor */ +#define FP_MODE_FINGER_UP (1<<2) +/* Capture the current finger image */ +#define FP_MODE_CAPTURE (1<<3) +/* special value: don't change anything just read back current mode */ +#define FP_MODE_DONT_CHANGE (1<<31) + +struct __ec_align4 ec_params_fp_mode { + uint32_t mode; /* as defined by FP_MODE_ constants */ + /* TBD */ +}; -struct ec_params_entering_mode { - int vboot_mode; -} __packed; +struct __ec_align4 ec_response_fp_mode { + uint32_t mode; /* as defined by FP_MODE_ constants */ + /* TBD */ +}; -#define VBOOT_MODE_NORMAL 0 -#define VBOOT_MODE_DEVELOPER 1 -#define VBOOT_MODE_RECOVERY 2 +/* Retrieve Fingerprint sensor information */ +#define EC_CMD_FP_INFO 0x0403 + +struct __ec_align2 ec_response_fp_info { + /* Sensor identification */ + uint32_t vendor_id; + uint32_t product_id; + uint32_t model_id; + uint32_t version; + /* Image frame characteristics */ + uint32_t frame_size; + uint32_t pixel_format; /* using V4L2_PIX_FMT_ */ + uint16_t width; + uint16_t height; + uint16_t bpp; +}; + +/* Get the last captured finger frame: TODO: will be AES-encrypted */ +#define EC_CMD_FP_FRAME 0x0404 + +struct __ec_align4 ec_params_fp_frame { + uint32_t offset; + uint32_t size; +}; /*****************************************************************************/ -/* System commands */ +/* Touchpad MCU commands: range 0x0500-0x05FF */ -/* - * TODO: this is a confusing name, since it doesn't necessarily reboot the EC. - * Rename to "set image" or something similar. - */ -#define EC_CMD_REBOOT_EC 0xd2 +/* Perform touchpad self test */ +#define EC_CMD_TP_SELF_TEST 0x0500 -/* Command */ -enum ec_reboot_cmd { - EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */ - EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */ - EC_REBOOT_JUMP_RW = 2, /* Jump to RW without rebooting */ - /* (command 3 was jump to RW-B) */ - EC_REBOOT_COLD = 4, /* Cold-reboot */ - EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */ - EC_REBOOT_HIBERNATE = 6 /* Hibernate EC */ +/* Get number of frame types, and the size of each type */ +#define EC_CMD_TP_FRAME_INFO 0x0501 + +struct __ec_align4 ec_response_tp_frame_info { + uint32_t n_frames; + uint32_t frame_sizes[0]; }; -/* Flags for ec_params_reboot_ec.reboot_flags */ -#define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */ -#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) /* Reboot after AP shutdown */ +/* Create a snapshot of current frame readings */ +#define EC_CMD_TP_FRAME_SNAPSHOT 0x0502 -struct ec_params_reboot_ec { - uint8_t cmd; /* enum ec_reboot_cmd */ - uint8_t flags; /* See EC_REBOOT_FLAG_* */ -} __packed; +/* Read the frame */ +#define EC_CMD_TP_FRAME_GET 0x0503 -/* - * Get information on last EC panic. - * - * Returns variable-length platform-dependent panic information. See panic.h - * for details. - */ -#define EC_CMD_GET_PANIC_INFO 0xd3 +struct __ec_align4 ec_params_tp_frame_get { + uint32_t frame_index; + uint32_t offset; + uint32_t size; +}; /*****************************************************************************/ /* - * ACPI commands - * - * These are valid ONLY on the ACPI command/data port. - */ - -/* - * ACPI Read Embedded Controller + * Reserve a range of host commands for board-specific, experimental, or + * special purpose features. These can be (re)used without updating this file. * - * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). + * CAUTION: Don't go nuts with this. Shipping products should document ALL + * their EC commands for easier development, testing, debugging, and support. * - * Use the following sequence: + * All commands MUST be #defined to be 4-digit UPPER CASE hex values + * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work. * - * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD - * - Wait for EC_LPC_CMDR_PENDING bit to clear - * - Write address to EC_LPC_ADDR_ACPI_DATA - * - Wait for EC_LPC_CMDR_DATA bit to set - * - Read value from EC_LPC_ADDR_ACPI_DATA - */ -#define EC_CMD_ACPI_READ 0x80 - -/* - * ACPI Write Embedded Controller + * In your experimental code, you may want to do something like this: * - * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). + * #define EC_CMD_MAGIC_FOO 0x0000 + * #define EC_CMD_MAGIC_BAR 0x0001 + * #define EC_CMD_MAGIC_HEY 0x0002 * - * Use the following sequence: + * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_FOO, magic_foo_handler, + * EC_VER_MASK(0); * - * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD - * - Wait for EC_LPC_CMDR_PENDING bit to clear - * - Write address to EC_LPC_ADDR_ACPI_DATA - * - Wait for EC_LPC_CMDR_PENDING bit to clear - * - Write value to EC_LPC_ADDR_ACPI_DATA - */ -#define EC_CMD_ACPI_WRITE 0x81 - -/* - * ACPI Query Embedded Controller + * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_BAR, magic_bar_handler, + * EC_VER_MASK(0); * - * This clears the lowest-order bit in the currently pending host events, and - * sets the result code to the 1-based index of the bit (event 0x00000001 = 1, - * event 0x80000000 = 32), or 0 if no event was pending. + * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_HEY, magic_hey_handler, + * EC_VER_MASK(0); */ -#define EC_CMD_ACPI_QUERY_EVENT 0x84 +#define EC_CMD_BOARD_SPECIFIC_BASE 0x3E00 +#define EC_CMD_BOARD_SPECIFIC_LAST 0x3FFF -/* Valid addresses in ACPI memory space, for read/write commands */ -/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */ -#define EC_ACPI_MEM_VERSION 0x00 /* - * Test location; writing value here updates test compliment byte to (0xff - - * value). + * Given the private host command offset, calculate the true private host + * command value. */ -#define EC_ACPI_MEM_TEST 0x01 -/* Test compliment; writes here are ignored. */ -#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02 -/* Keyboard backlight brightness percent (0 - 100) */ -#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03 - -/* Current version of ACPI memory address space */ -#define EC_ACPI_MEM_VERSION_CURRENT 1 - +#define EC_PRIVATE_HOST_COMMAND_VALUE(command) \ + (EC_CMD_BOARD_SPECIFIC_BASE + (command)) /*****************************************************************************/ /* - * Special commands + * Passthru commands * - * These do not follow the normal rules for commands. See each command for - * details. - */ - -/* - * Reboot NOW + * Some platforms have sub-processors chained to each other. For example. * - * This command will work even when the EC LPC interface is busy, because the - * reboot command is processed at interrupt level. Note that when the EC - * reboots, the host will reboot too, so there is no response to this command. + * AP <--> EC <--> PD MCU * - * Use EC_CMD_REBOOT_EC to reboot the EC more politely. - */ -#define EC_CMD_REBOOT 0xd1 /* Think "die" */ - -/* - * Resend last response (not supported on LPC). + * The top 2 bits of the command number are used to indicate which device the + * command is intended for. Device 0 is always the device receiving the + * command; other device mapping is board-specific. * - * Returns EC_RES_UNAVAILABLE if there is no response available - for example, - * there was no previous command, or the previous command's response was too - * big to save. + * When a device receives a command to be passed to a sub-processor, it passes + * it on with the device number set back to 0. This allows the sub-processor + * to remain blissfully unaware of whether the command originated on the next + * device up the chain, or was passed through from the AP. + * + * In the above example, if the AP wants to send command 0x0002 to the PD MCU, + * AP sends command 0x4002 to the EC + * EC sends command 0x0002 to the PD MCU + * EC forwards PD MCU response back to the AP */ -#define EC_CMD_RESEND_RESPONSE 0xdb +/* Offset and max command number for sub-device n */ +#define EC_CMD_PASSTHRU_OFFSET(n) (0x4000 * (n)) +#define EC_CMD_PASSTHRU_MAX(n) (EC_CMD_PASSTHRU_OFFSET(n) + 0x3fff) + +/*****************************************************************************/ /* - * This header byte on a command indicate version 0. Any header byte less - * than this means that we are talking to an old EC which doesn't support - * versioning. In that case, we assume version 0. - * - * Header bytes greater than this indicate a later version. For example, - * EC_CMD_VERSION0 + 1 means we are using version 1. - * - * The old EC interface must not use commands 0dc or higher. + * Deprecated constants. These constants have been renamed for clarity. The + * meaning and size has not changed. Programs that use the old names should + * switch to the new names soon, as the old names may not be carried forward + * forever. */ -#define EC_CMD_VERSION0 0xdc +#define EC_HOST_PARAM_SIZE EC_PROTO2_MAX_PARAM_SIZE +#define EC_LPC_ADDR_OLD_PARAM EC_HOST_CMD_REGION1 +#define EC_OLD_PARAM_SIZE EC_HOST_CMD_REGION_SIZE -#endif /* !__ACPI__ */ +#endif /* !__ACPI__ && !__KERNEL__ */ #endif /* __CROS_EC_COMMANDS_H */ -- 2.25.1