From 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778 Mon Sep 17 00:00:00 2001 From: Grzegorz Bernacki Date: Fri, 7 Sep 2007 18:35:37 +0200 Subject: [PATCH] [PPC440SPe] PCIe environment settings for Katmai and Yucca - 'pciconfighost' is set by default in order to be able to scan bridges behind the primary host/PCIe - 'pciscandelay' env variable is recognized to allow for user-controlled delay before the PCIe bus enumeration; some peripheral devices require a significant delay before they can be scanned (e.g. LSI8408E); without the delay they are not detected Signed-off-by: Grzegorz Bernacki --- board/amcc/katmai/katmai.c | 12 ++++++++++++ board/amcc/yucca/yucca.c | 12 ++++++++++++ include/configs/katmai.h | 3 ++- include/configs/yucca.h | 3 ++- 4 files changed, 28 insertions(+), 2 deletions(-) diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index a9ae4a3739..afd60ece62 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -396,6 +396,8 @@ void pcie_setup_hoses(int busno) { struct pci_controller *hose; int i, bus; + char *env; + unsigned int delay; /* * assume we're called after the PCIX hose is initialized, which takes @@ -439,6 +441,16 @@ void pcie_setup_hoses(int busno) */ #else ppc440spe_setup_pcie_rootpoint(hose, i); + + env = getenv ("pciscandelay"); + if (env != NULL) { + delay = simple_strtoul (env, NULL, 10); + if (delay > 5) + printf ("Warning, expect noticable delay before PCIe" + "scan due to 'pciscandelay' value!\n"); + mdelay (delay * 1000); + } + /* * Config access can only go down stream */ diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 252e4fe07a..397b01873f 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -850,6 +850,8 @@ void pcie_setup_hoses(int busno) { struct pci_controller *hose; int i, bus; + char *env; + unsigned int delay; /* * assume we're called after the PCIX hose is initialized, which takes @@ -895,6 +897,16 @@ void pcie_setup_hoses(int busno) */ #else ppc440spe_setup_pcie_rootpoint(hose, i); + + env = getenv ("pciscandelay"); + if (env != NULL) { + delay = simple_strtoul (env, NULL, 10); + if (delay > 5) + printf ("Warning, expect noticable delay before PCIe" + "scan due to 'pciscandelay' value!\n"); + mdelay (delay * 1000); + } + /* * Config access can only go down stream */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 7834e39084..7908e5a474 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -201,6 +201,7 @@ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ "kozio=bootm ffc60000\0" \ + "pciconfighost=1\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -322,7 +323,7 @@ #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#undef CONFIG_PCI_CONFIG_HOST_BRIDGE +#define CONFIG_PCI_CONFIG_HOST_BRIDGE /* Board-specific PCI */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 323535aa9f..74033b4aef 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -182,6 +182,7 @@ "cp.b ${fileaddr} FFFB0000 ${filesize};" \ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ + "pciconfighost=1\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -297,7 +298,7 @@ #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#undef CONFIG_PCI_CONFIG_HOST_BRIDGE +#define CONFIG_PCI_CONFIG_HOST_BRIDGE /* Board-specific PCI */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ -- 2.25.1