From 6c09eba507f9f78cfc96db760d064d70d691e9b9 Mon Sep 17 00:00:00 2001 From: Jon Nettleton Date: Mon, 11 Jun 2018 15:26:19 +0300 Subject: [PATCH] mmc: break out get_op_cond code to its own function This code is useful for testing the existance of devices that do not have card detect capabilities. This breaks out the core functionality and leaves the actual init logic and error reporting in mmc_start_init(). Signed-off-by: Jon Nettleton Signed-off-by: Baruch Siach Reviewed-by: Stefano Babic --- drivers/mmc/mmc.c | 61 +++++++++++++++++++++++++++-------------------- include/mmc.h | 10 ++++++++ 2 files changed, 45 insertions(+), 26 deletions(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index f7827f527a..ad429f49c9 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -2491,36 +2491,11 @@ static int mmc_power_cycle(struct mmc *mmc) return mmc_power_on(mmc); } -int mmc_start_init(struct mmc *mmc) +int mmc_get_op_cond(struct mmc *mmc) { - bool no_card; bool uhs_en = supports_uhs(mmc->cfg->host_caps); int err; - /* - * all hosts are capable of 1 bit bus-width and able to use the legacy - * timings. - */ - mmc->host_caps = mmc->cfg->host_caps | MMC_CAP(SD_LEGACY) | - MMC_CAP(MMC_LEGACY) | MMC_MODE_1BIT; - -#if !defined(CONFIG_MMC_BROKEN_CD) - /* we pretend there's no card when init is NULL */ - no_card = mmc_getcd(mmc) == 0; -#else - no_card = 0; -#endif -#if !CONFIG_IS_ENABLED(DM_MMC) - no_card = no_card || (mmc->cfg->ops->init == NULL); -#endif - if (no_card) { - mmc->has_init = 0; -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) - pr_err("MMC: no card present\n"); -#endif - return -ENOMEDIUM; - } - if (mmc->has_init) return 0; @@ -2597,6 +2572,40 @@ retry: } } + return err; +} + +int mmc_start_init(struct mmc *mmc) +{ + bool no_card; + int err = 0; + + /* + * all hosts are capable of 1 bit bus-width and able to use the legacy + * timings. + */ + mmc->host_caps = mmc->cfg->host_caps | MMC_CAP(SD_LEGACY) | + MMC_CAP(MMC_LEGACY) | MMC_MODE_1BIT; + +#if !defined(CONFIG_MMC_BROKEN_CD) + /* we pretend there's no card when init is NULL */ + no_card = mmc_getcd(mmc) == 0; +#else + no_card = 0; +#endif +#if !CONFIG_IS_ENABLED(DM_MMC) + no_card = no_card || (mmc->cfg->ops->init == NULL); +#endif + if (no_card) { + mmc->has_init = 0; +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) + pr_err("MMC: no card present\n"); +#endif + return -ENOMEDIUM; + } + + err = mmc_get_op_cond(mmc); + if (!err) mmc->init_in_progress = 1; diff --git a/include/mmc.h b/include/mmc.h index 1729292d27..df4255b828 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -752,6 +752,16 @@ int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk, int mmc_set_bkops_enable(struct mmc *mmc); #endif +/** + * Start device initialization and return immediately; it does not block on + * polling OCR (operation condition register) status. Useful for checking + * the presence of SD/eMMC when no card detect logic is available. + * + * @param mmc Pointer to a MMC device struct + * @return 0 on success, <0 on error. + */ +int mmc_get_op_cond(struct mmc *mmc); + /** * Start device initialization and return immediately; it does not block on * polling OCR (operation condition register) status. Then you should call -- 2.25.1