From 6bf179b27004eb76df3e466bd080fc5a83ccf0dd Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Wed, 10 Jul 2019 12:29:03 +0200 Subject: [PATCH] lantiq: add Linux 5.4 support as testing kernel version Switch to the mainline Lantiq PCIe PHY driver and update the vr9.dtsi accordingly. The Lantiq IRQ SMP support added upstream required changes to the SoC dtsi as well. Following changes are made to the Lantiq kernel patches: 0005-lantiq_etop-pass-struct-device-to-DMA-API-functions.patch 0006-MIPS-lantiq-pass-struct-device-to-DMA-API-functions.patch applied upstream 0008-MIPS-lantiq-backport-old-timer-code.patch access_ok API update because it lost it's type (which was the first) parameter in upstream commit 96d4f267e40f95 ("Remove 'type' argument from access_ok() function") 0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch merged into 0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch 0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch revert upstream changes required for upstream xrx200 ethernet and xrx200 (DSA) switch driver but breaking our driver 0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch required for our driver but dropped upstream, add former upstream version 0028-NET-lantiq-various-etop-fixes.patch now has to use the phy_set_max_speed API instead of modifying phydev->supported. Also call ltq_dma_enable_irq() in ltq_etop_open() based on upstream commit cc973aecf0b054 ("MIPS: lantiq: Do not enable IRQs in dma open") Signed-off-by: Mathias Kresin Signed-off-by: Martin Blumenstingl --- target/linux/generic/config-5.4 | 1 + target/linux/lantiq/Makefile | 1 + target/linux/lantiq/ase/config-5.4 | 6 +- target/linux/lantiq/config-5.4 | 39 +- target/linux/lantiq/falcon/config-5.4 | 8 +- .../arch/mips/boot/dts/lantiq/amazonse.dtsi | 6 +- .../arch/mips/boot/dts/lantiq/ar9.dtsi | 7 +- .../arch/mips/boot/dts/lantiq/danube.dtsi | 10 +- .../arch/mips/boot/dts/lantiq/falcon.dtsi | 7 +- .../arch/mips/boot/dts/lantiq/vr9.dtsi | 27 +- .../0001-MIPS-lantiq-add-pcie-driver.patch | 24 +- .../0004-MIPS-lantiq-add-atm-hack.patch | 22 +- ...s-struct-device-to-DMA-API-functions.patch | 43 --- ...s-struct-device-to-DMA-API-functions.patch | 50 --- ...-MIPS-lantiq-backport-old-timer-code.patch | 7 +- .../0018-MTD-nand-lots-of-xrx200-fixes.patch | 19 +- .../002-pinctrl-falcon-fix-syntax-error.patch | 25 ++ ...antiq-handle-NO_XIP-on-cfi0001-flash.patch | 2 +- ...T-PHY-add-led-support-for-intel-xway.patch | 4 +- ...antiq-autoselect-soc-rev-matching-fw.patch | 45 --- ...rt-DSA-switch-driver-PMU-clock-chang.patch | 55 +++ ...-NET-MIPS-lantiq-adds-xrx200-legacy.patch} | 57 +-- ...MIPS-lantiq-Add-GPHY-Firmware-loader.patch | 352 ++++++++++++++++++ .../0028-NET-lantiq-various-etop-fixes.patch | 100 +++-- .../0030-GPIO-add-named-gpio-exports.patch | 18 +- ...PS-lantiq-add-FALC-ON-i2c-bus-master.patch | 4 +- ...iq-wifi-and-ethernet-eeprom-handling.patch | 6 +- ...42-arch-mips-increase-io_space_limit.patch | 2 +- ...e-lantiq-settings-match-vendor-drive.patch | 6 +- ...PS-lantiq-improve-USB-initialization.patch | 4 +- .../patches-5.4/0101-find_active_root.patch | 14 +- .../0151-lantiq-ifxmips_pcie-use-of.patch | 216 ++++++++++- .../lantiq/patches-5.4/0152-lantiq-VPE.patch | 6 +- .../0154-lantiq-pci-bar11mask-fix.patch | 4 +- .../0160-owrt-lantiq-multiple-flash.patch | 8 +- ...add-gphy-clk-src-device-tree-binding.patch | 4 +- .../0701-NET-lantiq-etop-of-mido.patch | 6 +- target/linux/lantiq/xrx200/config-5.4 | 17 +- target/linux/lantiq/xway/config-5.4 | 15 +- target/linux/lantiq/xway_legacy/config-5.4 | 3 +- 40 files changed, 884 insertions(+), 366 deletions(-) delete mode 100644 target/linux/lantiq/patches-5.4/0005-lantiq_etop-pass-struct-device-to-DMA-API-functions.patch delete mode 100644 target/linux/lantiq/patches-5.4/0006-MIPS-lantiq-pass-struct-device-to-DMA-API-functions.patch create mode 100644 target/linux/lantiq/patches-5.4/002-pinctrl-falcon-fix-syntax-error.patch delete mode 100644 target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch create mode 100644 target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch rename target/linux/lantiq/patches-5.4/{0025-NET-MIPS-lantiq-adds-xrx200-net.patch => 0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch} (99%) create mode 100644 target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch diff --git a/target/linux/generic/config-5.4 b/target/linux/generic/config-5.4 index 6e11c411f8..ec2b87b084 100644 --- a/target/linux/generic/config-5.4 +++ b/target/linux/generic/config-5.4 @@ -4679,6 +4679,7 @@ CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LTC4260 is not set # CONFIG_SENSORS_LTC4261 is not set +# CONFIG_SENSORS_LTQ_CPUTEMP is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX16064 is not set # CONFIG_SENSORS_MAX16065 is not set diff --git a/target/linux/lantiq/Makefile b/target/linux/lantiq/Makefile index 36e8af773f..b2b10c57bb 100644 --- a/target/linux/lantiq/Makefile +++ b/target/linux/lantiq/Makefile @@ -12,6 +12,7 @@ FEATURES:=squashfs SUBTARGETS:=xrx200 xway xway_legacy falcon ase KERNEL_PATCHVER:=4.19 +KERNEL_TESTING_PATCHVER:=5.4 define Target/Description Build firmware images for Lantiq SoC diff --git a/target/linux/lantiq/ase/config-5.4 b/target/linux/lantiq/ase/config-5.4 index 0c211847d2..159c57bca7 100644 --- a/target/linux/lantiq/ase/config-5.4 +++ b/target/linux/lantiq/ase/config-5.4 @@ -1,4 +1,5 @@ CONFIG_ADM6996_PHY=y +CONFIG_ARCH_HAS_PTE_SPECIAL=y CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set CONFIG_CPU_MIPSR1=y @@ -6,17 +7,18 @@ CONFIG_CRC16=y CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_DEFLATE=y CONFIG_FIRMWARE_MEMMAP=y +CONFIG_GENERIC_ALLOCATOR=y CONFIG_GPIO_GENERIC=y CONFIG_GPIO_GENERIC_PLATFORM=y # CONFIG_ISDN is not set -# CONFIG_LBDAF is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_MIPS_FPU_EMULATOR=y CONFIG_NLS=y # CONFIG_PSB6970_PHY is not set # CONFIG_RTL8366_SMI is not set +CONFIG_SGL_ALLOC=y CONFIG_SOC_AMAZON_SE=y # CONFIG_SOC_XWAY is not set +CONFIG_TARGET_ISA_REV=1 CONFIG_USB=y CONFIG_USB_COMMON=y # CONFIG_USB_EHCI_HCD is not set diff --git a/target/linux/lantiq/config-5.4 b/target/linux/lantiq/config-5.4 index 560e8474dc..3d3b7db958 100644 --- a/target/linux/lantiq/config-5.4 +++ b/target/linux/lantiq/config-5.4 @@ -1,23 +1,30 @@ -CONFIG_ARCH_BINFMT_ELF_STATE=y +CONFIG_ARCH_32BIT_OFF_T=y CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y +CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y +CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_ARCH_HAS_RESET_CONTROLLER=y CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y +CONFIG_ARCH_HAS_UNCACHED_SEGMENT=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_MMAP_RND_BITS_MAX=15 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_MEMREMAP_PROT=y CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_CEVT_R4K=y CONFIG_CLKDEV_LOOKUP=y CONFIG_CLONE_BACKWARDS=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CPU_BIG_ENDIAN=y CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_LOAD_STORE_LR=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_CPU_HAS_RIXI=y CONFIG_CPU_HAS_SYNC=y @@ -27,29 +34,31 @@ CONFIG_CPU_MIPS32_R2=y CONFIG_CPU_MIPSR2=y CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_R4K_FPU=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_CPU_SUPPORTS_MSA=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CSRC_R4K=y -CONFIG_DMA_DIRECT_OPS=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y -CONFIG_DMA_NONCOHERENT_MMAP=y -CONFIG_DMA_NONCOHERENT_OPS=y CONFIG_DTC=y # CONFIG_DT_EASY50712 is not set CONFIG_EARLY_PRINTK=y +CONFIG_EFI_EARLYCON=y CONFIG_ETHERNET_PACKET_MANGLE=y CONFIG_FIXED_PHY=y +CONFIG_FONT_8x16=y +CONFIG_FONT_AUTOSELECT=y +CONFIG_FONT_SUPPORT=y +CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_GENERIC_ATOMIC64=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y CONFIG_GENERIC_IRQ_IPI=y @@ -78,7 +87,7 @@ CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_CBPF_JIT=y +CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_COPY_THREAD_TLS=y @@ -87,27 +96,27 @@ CONFIG_HAVE_DEBUG_KMEMLEAK=y CONFIG_HAVE_DEBUG_STACKOVERFLOW=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FAST_GUP=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_GENERIC_VDSO=y CONFIG_HAVE_IDE=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_KVM=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y -CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_HAVE_NET_DSA=y CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PCI=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HW_HAS_PCI=y CONFIG_HW_RANDOM=y CONFIG_HZ=250 # CONFIG_HZ_100 is not set @@ -125,6 +134,7 @@ CONFIG_LANTIQ_DT_NONE=y CONFIG_LANTIQ_ETOP=y CONFIG_LANTIQ_WDT=y # CONFIG_LANTIQ_XRX200 is not set +# CONFIG_LANTIQ_XRX200_LEGACY is not set CONFIG_LEDS_GPIO=y CONFIG_LIBFDT=y CONFIG_LOCK_DEBUGGING_SUPPORT=y @@ -137,7 +147,6 @@ CONFIG_MIGRATION=y CONFIG_MIPS=y CONFIG_MIPS_ASID_BITS=8 CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CBPF_JIT=y CONFIG_MIPS_CLOCK_VSYSCALL=y # CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set # CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set @@ -155,7 +164,6 @@ CONFIG_MTD_CFI_GEOMETRY=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_LANTIQ=y -CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPLIT_BRNIMAGE_FW=y CONFIG_MTD_SPLIT_EVA_FW=y @@ -180,6 +188,7 @@ CONFIG_PERF_USE_VMALLOC=y CONFIG_PGTABLE_LEVELS=2 CONFIG_PHYLIB=y CONFIG_PHY_LANTIQ_RCU_USB2=y +# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set CONFIG_PINCTRL=y CONFIG_PINCTRL_LANTIQ=y # CONFIG_PINCTRL_SINGLE is not set @@ -217,7 +226,9 @@ CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_MIPS16=y CONFIG_SYS_SUPPORTS_MULTITHREADING=y CONFIG_SYS_SUPPORTS_VPE_LOADER=y +CONFIG_TARGET_ISA_REV=2 CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TINY_SRCU=y CONFIG_USE_OF=y +CONFIG_WATCHDOG_CORE=y # CONFIG_XRX200_PHY_FW is not set diff --git a/target/linux/lantiq/falcon/config-5.4 b/target/linux/lantiq/falcon/config-5.4 index 84b36d0066..e2f94b54d0 100644 --- a/target/linux/lantiq/falcon/config-5.4 +++ b/target/linux/lantiq/falcon/config-5.4 @@ -1,12 +1,10 @@ -# CONFIG_MFD_CORE is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux" CONFIG_PINCTRL_FALCON=y # CONFIG_PSB6970_PHY is not set -# CONFIG_RESET_LANTIQ is not set # CONFIG_RTL8366_SMI is not set CONFIG_SOC_FALCON=y -# CONFIG_SOC_TYPE_XWAY is not set # CONFIG_SOC_XWAY is not set CONFIG_SPI_FALCON=y diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/amazonse.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/amazonse.dtsi index 496150b7a7..f2845ee4ac 100644 --- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/amazonse.dtsi +++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/amazonse.dtsi @@ -42,11 +42,7 @@ #interrupt-cells = <1>; interrupt-controller; compatible = "lantiq,icu"; - reg = <0x80200 0x28 - 0x80228 0x28 - 0x80250 0x28 - 0x80278 0x28 - 0x802a0 0x28>; + reg = <0x80200 0xc8>; }; watchdog@803f0 { diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9.dtsi index 12af82b8ce..d4afd23f7b 100644 --- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9.dtsi +++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9.dtsi @@ -42,11 +42,8 @@ #interrupt-cells = <1>; interrupt-controller; compatible = "lantiq,icu"; - reg = <0x80200 0x28 - 0x80228 0x28 - 0x80250 0x28 - 0x80278 0x28 - 0x802a0 0x28>; + /* TODO: AR9 should have ICU1 (like VR9) too */ + reg = <0x80200 0xc8>; }; watchdog@803f0 { diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube.dtsi index ae8c1c045a..eae613e008 100644 --- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube.dtsi +++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube.dtsi @@ -42,11 +42,11 @@ #interrupt-cells = <1>; interrupt-controller; compatible = "lantiq,icu"; - reg = <0x80200 0x28 - 0x80228 0x28 - 0x80250 0x28 - 0x80278 0x28 - 0x802a0 0x28>; + /* + * There is a second ICU, but the SoC is not SMP + * capable. + */ + reg = <0x80200 0xc8>; }; watchdog@803f0 { diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/falcon.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/falcon.dtsi index dada3bcff2..cf9b33ea93 100644 --- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/falcon.dtsi +++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/falcon.dtsi @@ -268,11 +268,8 @@ #interrupt-cells = <1>; interrupt-controller; compatible = "lantiq,icu"; - reg = <0x80200 0x28 - 0x80228 0x28 - 0x80250 0x28 - 0x80278 0x28 - 0x802a0 0x28>; + /* TODO: Number of ICUs isn't known */ + reg = <0x80200 0xc8>; }; watchdog@803f0 { diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9.dtsi index 35b1f180a5..19f42d8c84 100644 --- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9.dtsi +++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9.dtsi @@ -1,4 +1,5 @@ #include +#include / { #address-cells = <1>; @@ -46,11 +47,8 @@ #interrupt-cells = <1>; interrupt-controller; compatible = "lantiq,icu"; - reg = <0x80200 0x28 - 0x80228 0x28 - 0x80250 0x28 - 0x80278 0x28 - 0x802a0 0x28>; + reg = <0x80200 0xc8 /* icu0 */ + 0x80300 0xc8>; /* icu1 */ }; watchdog@803f0 { @@ -100,6 +98,18 @@ interrupts = <150 151 152 153 154 155>; }; + pcie0_phy: phy@106800 { + compatible = "lantiq,vrx200-pcie-phy"; + reg = <0x106800 0x100>; + lantiq,rcu = <&rcu0>; + lantiq,rcu-endian-offset = <0x4c>; + lantiq,rcu-big-endian-mask = <0x80>; /* bit 7 */ + big-endian; + resets = <&reset0 12 24>, <&reset0 22 22>; + reset-names = "phy", "pcie"; + #phy-cells = <1>; + }; + rcu0: rcu@203000 { #address-cells = <1>; #size-cells = <1>; @@ -465,6 +475,13 @@ interrupt-parent = <&icu0>; interrupts = <161 144>; + phys = <&pcie0_phy LANTIQ_PCIE_PHY_MODE_36MHZ>; + phy-names = "pcie"; + + resets = <&reset0 22 22>; + + lantiq,rcu = <&rcu0>; + device_type = "pci"; gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>; diff --git a/target/linux/lantiq/patches-5.4/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-5.4/0001-MIPS-lantiq-add-pcie-driver.patch index 4cea5547c2..bcd928aea9 100644 --- a/target/linux/lantiq/patches-5.4/0001-MIPS-lantiq-add-pcie-driver.patch +++ b/target/linux/lantiq/patches-5.4/0001-MIPS-lantiq-add-pcie-driver.patch @@ -44,12 +44,12 @@ Signed-off-by: John Crispin @@ -20,6 +20,7 @@ config SOC_XWAY bool "XWAY" select SOC_TYPE_XWAY - select HW_HAS_PCI + select HAVE_PCI + select ARCH_SUPPORTS_MSI select MFD_SYSCON select MFD_CORE -@@ -52,6 +53,15 @@ config PCI_LANTIQ +@@ -52,4 +53,13 @@ config PCI_LANTIQ bool "PCI Support" depends on SOC_XWAY && PCI @@ -62,12 +62,10 @@ Signed-off-by: John Crispin + depends on PCIE_LANTIQ && PCI_MSI + default y + - config XRX200_PHY_FW - bool "XRX200 PHY firmware loader" - depends on SOC_XWAY + endif --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile -@@ -49,6 +49,8 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o +@@ -51,6 +51,8 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o @@ -155,7 +153,7 @@ Signed-off-by: John Crispin + ifx_pcie_rc_class_early_fixup); --- a/arch/mips/pci/fixup-lantiq.c +++ b/arch/mips/pci/fixup-lantiq.c -@@ -8,12 +8,18 @@ +@@ -6,12 +6,18 @@ #include #include @@ -174,7 +172,7 @@ Signed-off-by: John Crispin if (ltq_pci_plat_arch_init) return ltq_pci_plat_arch_init(dev); -@@ -25,5 +31,10 @@ int pcibios_plat_dev_init(struct pci_dev +@@ -23,5 +29,10 @@ int pcibios_plat_dev_init(struct pci_dev int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { @@ -4143,7 +4141,7 @@ Signed-off-by: John Crispin + --- a/arch/mips/pci/pci-legacy.c +++ b/arch/mips/pci/pci-legacy.c -@@ -311,3 +311,30 @@ char *__init pcibios_setup(char *str) +@@ -308,3 +308,30 @@ char *__init pcibios_setup(char *str) return pcibios_plat_setup(str); return str; } @@ -5484,7 +5482,7 @@ Signed-off-by: John Crispin + --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig -@@ -54,6 +54,7 @@ config PCIEAER_INJECT +@@ -52,6 +52,7 @@ config PCIEAER_INJECT config PCIE_ECRC bool "PCI Express ECRC settings control" depends on PCIEAER @@ -5494,7 +5492,7 @@ Signed-off-by: John Crispin (transaction layer end-to-end CRC checking). --- a/include/linux/pci.h +++ b/include/linux/pci.h -@@ -1325,6 +1325,8 @@ void pci_walk_bus(struct pci_bus *top, i +@@ -1390,6 +1390,8 @@ void pci_walk_bus(struct pci_bus *top, i void *userdata); int pci_cfg_space_size(struct pci_dev *dev); unsigned char pci_bus_max_busnr(struct pci_bus *bus); @@ -5505,9 +5503,9 @@ Signed-off-by: John Crispin unsigned long type); --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h -@@ -1065,6 +1065,12 @@ +@@ -1072,6 +1072,12 @@ + #define PCI_DEVICE_ID_SGI_IOC3 0x0003 #define PCI_DEVICE_ID_SGI_LITHIUM 0x1002 - #define PCI_DEVICE_ID_SGI_IOC4 0x100a +#define PCI_VENDOR_ID_INFINEON 0x15D1 +#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F diff --git a/target/linux/lantiq/patches-5.4/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-5.4/0004-MIPS-lantiq-add-atm-hack.patch index b74642af14..1b1a0a1ca7 100644 --- a/target/linux/lantiq/patches-5.4/0004-MIPS-lantiq-add-atm-hack.patch +++ b/target/linux/lantiq/patches-5.4/0004-MIPS-lantiq-add-atm-hack.patch @@ -8,7 +8,7 @@ Signed-off-by: John Crispin arch/mips/include/asm/mach-lantiq/lantiq_atm.h | 196 +++++++++++++++++++++++ arch/mips/include/asm/mach-lantiq/lantiq_ptm.h | 203 ++++++++++++++++++++++++ arch/mips/lantiq/irq.c | 2 + - arch/mips/mm/cache.c | 2 + + arch/mips/mm/cache.c | 4 + include/uapi/linux/atm.h | 6 + net/atm/common.c | 6 + net/atm/proc.c | 2 +- @@ -423,7 +423,7 @@ Signed-off-by: John Crispin + --- a/arch/mips/lantiq/irq.c +++ b/arch/mips/lantiq/irq.c -@@ -14,6 +14,7 @@ +@@ -12,6 +12,7 @@ #include #include #include @@ -431,25 +431,27 @@ Signed-off-by: John Crispin #include #include -@@ -96,6 +97,7 @@ void ltq_mask_and_ack_irq(struct irq_dat - ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier); - ltq_icu_w32(im, BIT(offset), isr); +@@ -91,6 +92,7 @@ void ltq_disable_irq(struct irq_data *d) + } + raw_spin_unlock_irqrestore(<q_icu_lock, flags); } +EXPORT_SYMBOL(ltq_mask_and_ack_irq); - static void ltq_ack_irq(struct irq_data *d) + void ltq_mask_and_ack_irq(struct irq_data *d) { --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c -@@ -64,6 +64,8 @@ void (*_dma_cache_wback)(unsigned long s +@@ -62,6 +62,10 @@ void (*_dma_cache_wback_inv)(unsigned lo + void (*_dma_cache_wback)(unsigned long start, unsigned long size); void (*_dma_cache_inv)(unsigned long start, unsigned long size); - EXPORT_SYMBOL(_dma_cache_wback_inv); ++EXPORT_SYMBOL(_dma_cache_wback_inv); +EXPORT_SYMBOL(_dma_cache_wback); +EXPORT_SYMBOL(_dma_cache_inv); - ++ #endif /* CONFIG_DMA_NONCOHERENT */ + /* --- a/include/uapi/linux/atm.h +++ b/include/uapi/linux/atm.h @@ -131,8 +131,14 @@ @@ -469,7 +471,7 @@ Signed-off-by: John Crispin int max_pcr; /* maximum PCR in cells per second */ --- a/net/atm/proc.c +++ b/net/atm/proc.c -@@ -141,7 +141,7 @@ static void *vcc_seq_next(struct seq_fil +@@ -142,7 +142,7 @@ static void *vcc_seq_next(struct seq_fil static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc) { static const char *const class_name[] = { diff --git a/target/linux/lantiq/patches-5.4/0005-lantiq_etop-pass-struct-device-to-DMA-API-functions.patch b/target/linux/lantiq/patches-5.4/0005-lantiq_etop-pass-struct-device-to-DMA-API-functions.patch deleted file mode 100644 index ccde787d2d..0000000000 --- a/target/linux/lantiq/patches-5.4/0005-lantiq_etop-pass-struct-device-to-DMA-API-functions.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 74e0deb89a8ba27c132b1f0e08643e215b5c1f92 Mon Sep 17 00:00:00 2001 -From: Christoph Hellwig -Date: Mon, 11 Feb 2019 14:20:00 +0100 -Subject: [PATCH] lantiq_etop: pass struct device to DMA API functions - -The DMA API generally relies on a struct device to work properly, and -only barely works without one for legacy reasons. Pass the easily -available struct device from the platform_device to remedy this. - -Note this driver seems to lack dma_unmap_* calls entirely, but fixing -that is left for another time. - -Signed-off-by: Christoph Hellwig -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/lantiq_etop.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/net/ethernet/lantiq_etop.c -+++ b/drivers/net/ethernet/lantiq_etop.c -@@ -112,10 +112,12 @@ struct ltq_etop_priv { - static int - ltq_etop_alloc_skb(struct ltq_etop_chan *ch) - { -+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev); -+ - ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN); - if (!ch->skb[ch->dma.desc]) - return -ENOMEM; -- ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL, -+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(&priv->pdev->dev, - ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN, - DMA_FROM_DEVICE); - ch->dma.desc_base[ch->dma.desc].addr = -@@ -493,7 +495,7 @@ ltq_etop_tx(struct sk_buff *skb, struct - netif_trans_update(dev); - - spin_lock_irqsave(&priv->lock, flags); -- desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len, -+ desc->addr = ((unsigned int) dma_map_single(&priv->pdev->dev, skb->data, len, - DMA_TO_DEVICE)) - byte_offset; - wmb(); - desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | diff --git a/target/linux/lantiq/patches-5.4/0006-MIPS-lantiq-pass-struct-device-to-DMA-API-functions.patch b/target/linux/lantiq/patches-5.4/0006-MIPS-lantiq-pass-struct-device-to-DMA-API-functions.patch deleted file mode 100644 index 412dd62050..0000000000 --- a/target/linux/lantiq/patches-5.4/0006-MIPS-lantiq-pass-struct-device-to-DMA-API-functions.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 74f03104ed465ff71b11076ef620e4eaa53dbf74 Mon Sep 17 00:00:00 2001 -From: Christoph Hellwig -Date: Fri, 1 Feb 2019 09:47:44 +0100 -Subject: [PATCH] MIPS: lantiq: pass struct device to DMA API functions - -The DMA API generally relies on a struct device to work properly, and -only barely works without one for legacy reasons. Pass the easily -available struct device from the platform_device to remedy this. - -Also use GFP_KERNEL instead of GFP_ATOMIC as the gfp_t for the memory -allocation, as we aren't in interrupt context or under a lock. - -Note that this whole function looks somewhat bogus given that we never -even look at the returned dma address, and the CPHYSADDR magic on -a returned noncached mapping looks "interesting". But I'll leave -that to people more familiar with the code to sort out. - -Signed-off-by: Christoph Hellwig -Signed-off-by: Paul Burton -Cc: John Crispin -Cc: Vinod Koul -Cc: Dmitry Tarnyagin -Cc: Nicolas Ferre -Cc: Sudip Mukherjee -Cc: Felipe Balbi -Cc: linux-mips@vger.kernel.org -Cc: linux-kernel@vger.kernel.org -Cc: dmaengine@vger.kernel.org -Cc: netdev@vger.kernel.org -Cc: linux-usb@vger.kernel.org -Cc: linux-fbdev@vger.kernel.org -Cc: alsa-devel@alsa-project.org -Cc: iommu@lists.linux-foundation.org ---- - arch/mips/lantiq/xway/vmmc.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/mips/lantiq/xway/vmmc.c -+++ b/arch/mips/lantiq/xway/vmmc.c -@@ -31,8 +31,8 @@ static int vmmc_probe(struct platform_de - dma_addr_t dma; - - cp1_base = -- (void *) CPHYSADDR(dma_alloc_coherent(NULL, CP1_SIZE, -- &dma, GFP_ATOMIC)); -+ (void *) CPHYSADDR(dma_alloc_coherent(&pdev->dev, CP1_SIZE, -+ &dma, GFP_KERNEL)); - - gpio_count = of_gpio_count(pdev->dev.of_node); - while (gpio_count > 0) { diff --git a/target/linux/lantiq/patches-5.4/0008-MIPS-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-5.4/0008-MIPS-lantiq-backport-old-timer-code.patch index 52e4cbeb1b..1d869afd9a 100644 --- a/target/linux/lantiq/patches-5.4/0008-MIPS-lantiq-backport-old-timer-code.patch +++ b/target/linux/lantiq/patches-5.4/0008-MIPS-lantiq-backport-old-timer-code.patch @@ -172,7 +172,8 @@ Signed-off-by: John Crispin +#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */ --- a/arch/mips/lantiq/xway/Makefile +++ b/arch/mips/lantiq/xway/Makefile -@@ -1,3 +1,9 @@ +@@ -1,4 +1,10 @@ + # SPDX-License-Identifier: GPL-2.0-only -obj-y := prom.o sysctrl.o clk.o dma.o gptu.o dcdc.o +obj-y := prom.o sysctrl.o clk.o dma.o dcdc.o + @@ -880,14 +881,14 @@ Signed-off-by: John Crispin + int ret; + struct gptu_ioctl_param param; + -+ if (!access_ok(VERIFY_READ, (void __user *)arg, sizeof(struct gptu_ioctl_param))) ++ if (!access_ok((void __user *)arg, sizeof(struct gptu_ioctl_param))) + return -EFAULT; + copy_from_user(¶m, (void __user *)arg, sizeof(param)); + + if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER + || GPTU_SET_COUNTER) && param.timer < 2) + || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER) -+ && !access_ok(VERIFY_WRITE, (void __user *)arg, ++ && !access_ok((void __user *)arg, + sizeof(struct gptu_ioctl_param))) + return -EFAULT; + diff --git a/target/linux/lantiq/patches-5.4/0018-MTD-nand-lots-of-xrx200-fixes.patch b/target/linux/lantiq/patches-5.4/0018-MTD-nand-lots-of-xrx200-fixes.patch index 4e34580efc..d68466c368 100644 --- a/target/linux/lantiq/patches-5.4/0018-MTD-nand-lots-of-xrx200-fixes.patch +++ b/target/linux/lantiq/patches-5.4/0018-MTD-nand-lots-of-xrx200-fixes.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/drivers/mtd/nand/raw/xway_nand.c +++ b/drivers/mtd/nand/raw/xway_nand.c -@@ -63,6 +63,24 @@ +@@ -61,6 +61,24 @@ #define NAND_CON_CSMUX (1 << 1) #define NAND_CON_NANDM 1 @@ -35,7 +35,7 @@ Signed-off-by: John Crispin struct xway_nand_data { struct nand_chip chip; unsigned long csflags; -@@ -94,10 +112,22 @@ static void xway_select_chip(struct mtd_ +@@ -91,10 +109,22 @@ static void xway_select_chip(struct nand case -1: ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON); ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON); @@ -58,11 +58,10 @@ Signed-off-by: John Crispin ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON); ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON); break; -@@ -108,6 +138,12 @@ static void xway_select_chip(struct mtd_ - - static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +@@ -107,6 +137,11 @@ static void xway_cmd_ctrl(struct nand_ch { -+ + struct mtd_info *mtd = nand_to_mtd(chip); + + if (req_mask) { + if (cmd != NAND_CMD_STATUS) + ltq_ebu_w32(0, EBU_NAND_WAIT); /* Clear nand ready */ @@ -71,7 +70,7 @@ Signed-off-by: John Crispin if (cmd == NAND_CMD_NONE) return; -@@ -118,6 +154,24 @@ static void xway_cmd_ctrl(struct mtd_inf +@@ -117,6 +152,24 @@ static void xway_cmd_ctrl(struct nand_ch while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) ; @@ -95,8 +94,8 @@ Signed-off-by: John Crispin + } } - static int xway_dev_ready(struct mtd_info *mtd) -@@ -157,6 +211,7 @@ static int xway_nand_probe(struct platfo + static int xway_dev_ready(struct nand_chip *chip) +@@ -156,6 +209,7 @@ static int xway_nand_probe(struct platfo int err; u32 cs; u32 cs_flag = 0; @@ -104,7 +103,7 @@ Signed-off-by: John Crispin /* Allocate memory for the device structure (and zero it) */ data = devm_kzalloc(&pdev->dev, sizeof(struct xway_nand_data), -@@ -192,6 +247,15 @@ static int xway_nand_probe(struct platfo +@@ -191,6 +245,15 @@ static int xway_nand_probe(struct platfo if (!err && cs == 1) cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1; diff --git a/target/linux/lantiq/patches-5.4/002-pinctrl-falcon-fix-syntax-error.patch b/target/linux/lantiq/patches-5.4/002-pinctrl-falcon-fix-syntax-error.patch new file mode 100644 index 0000000000..40a833be54 --- /dev/null +++ b/target/linux/lantiq/patches-5.4/002-pinctrl-falcon-fix-syntax-error.patch @@ -0,0 +1,25 @@ +From d2fee0bb982195540e4fbe009996fcdbc26d163c Mon Sep 17 00:00:00 2001 +From: Mathias Kresin +Date: Thu, 5 Mar 2020 08:17:27 +0100 +Subject: [PATCH] pinctrl: falcon: fix syntax error + +Add the missing semicolon after of_node_put to get the file compiled. + +Fixes: f17d2f54d36d ("pinctrl: falcon: Add of_node_put() before return") +Cc: stable@vger.kernel.org # v5.4+ +Signed-off-by: Mathias Kresin +--- + drivers/pinctrl/pinctrl-falcon.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pinctrl/pinctrl-falcon.c ++++ b/drivers/pinctrl/pinctrl-falcon.c +@@ -451,7 +451,7 @@ static int pinctrl_falcon_probe(struct p + falcon_info.clk[*bank] = clk_get(&ppdev->dev, NULL); + if (IS_ERR(falcon_info.clk[*bank])) { + dev_err(&ppdev->dev, "failed to get clock\n"); +- of_node_put(np) ++ of_node_put(np); + return PTR_ERR(falcon_info.clk[*bank]); + } + falcon_info.membase[*bank] = devm_ioremap_resource(&pdev->dev, diff --git a/target/linux/lantiq/patches-5.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-5.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch index 502c5af9f2..c1fc59487a 100644 --- a/target/linux/lantiq/patches-5.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch +++ b/target/linux/lantiq/patches-5.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/drivers/mtd/maps/lantiq-flash.c +++ b/drivers/mtd/maps/lantiq-flash.c -@@ -131,7 +131,11 @@ ltq_mtd_probe(struct platform_device *pd +@@ -129,7 +129,11 @@ ltq_mtd_probe(struct platform_device *pd if (!ltq_mtd->map) return -ENOMEM; diff --git a/target/linux/lantiq/patches-5.4/0023-NET-PHY-add-led-support-for-intel-xway.patch b/target/linux/lantiq/patches-5.4/0023-NET-PHY-add-led-support-for-intel-xway.patch index e5ba24c3e7..5a668b6f56 100644 --- a/target/linux/lantiq/patches-5.4/0023-NET-PHY-add-led-support-for-intel-xway.patch +++ b/target/linux/lantiq/patches-5.4/0023-NET-PHY-add-led-support-for-intel-xway.patch @@ -13,7 +13,7 @@ Signed-off-by: John Crispin --- a/drivers/net/phy/intel-xway.c +++ b/drivers/net/phy/intel-xway.c -@@ -154,6 +154,51 @@ +@@ -145,6 +145,51 @@ #define PHY_ID_PHY11G_VR9_1_2 0xD565A409 #define PHY_ID_PHY22F_VR9_1_2 0xD565A419 @@ -65,7 +65,7 @@ Signed-off-by: John Crispin static int xway_gphy_config_init(struct phy_device *phydev) { int err; -@@ -192,6 +237,7 @@ static int xway_gphy_config_init(struct +@@ -183,6 +228,7 @@ static int xway_gphy_config_init(struct phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H, ledxh); phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, ledxl); diff --git a/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch b/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch deleted file mode 100644 index 7fbd97feca..0000000000 --- a/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch +++ /dev/null @@ -1,45 +0,0 @@ -From ae0c287060749dc72c866484d12bd3cade8c517d Mon Sep 17 00:00:00 2001 -From: Mathias Kresin -Date: Fri, 19 Jan 2018 20:19:06 +0100 -Subject: [PATCH] MIPS: lantiq: autoselect matching vr9 rev gphy firmware - -Add a custom xrx200 ethernet phy compatible to load the firmware matching -the vr9 revision without specifing an expected revision. - -We have quite a few boards in the tree were later produced ones are using -a more recent vr9. It is impossible to distinguish which revision of the -vr9 is used without opening the case and removing a heatsink for some of -them. - -Signed-off-by: Mathias Kresin ---- - drivers/soc/lantiq/gphy.c | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/drivers/soc/lantiq/gphy.c -+++ b/drivers/soc/lantiq/gphy.c -@@ -55,6 +55,7 @@ static const struct xway_gphy_match_data - }; - - static const struct of_device_id xway_gphy_match[] = { -+ { .compatible = "lantiq,xrx200-gphy", .data = NULL }, - { .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data }, - { .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data }, - { .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data }, -@@ -111,6 +112,16 @@ static int xway_gphy_of_probe(struct pla - - gphy_fw_name_cfg = of_device_get_match_data(dev); - -+ if (of_device_is_compatible(pdev->dev.of_node, "lantiq,xrx200-gphy")) -+ switch (ltq_soc_type()) { -+ case SOC_TYPE_VR9: -+ gphy_fw_name_cfg = &xrx200a1x_gphy_data; -+ break; -+ case SOC_TYPE_VR9_2: -+ gphy_fw_name_cfg = &xrx200a2x_gphy_data; -+ break; -+ } -+ - priv->gphy_clk_gate = devm_clk_get(dev, NULL); - if (IS_ERR(priv->gphy_clk_gate)) { - dev_err(dev, "Failed to lookup gate clock\n"); diff --git a/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch b/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch new file mode 100644 index 0000000000..a364d6d67b --- /dev/null +++ b/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch @@ -0,0 +1,55 @@ +From d0ee51bbb7ce9880749a3d4794ec1fbbcda0f381 Mon Sep 17 00:00:00 2001 +From: Mathias Kresin +Date: Sun, 7 Jul 2019 21:45:51 +0200 +Subject: [PATCH] MIPS: lantiq revert DSA switch driver PMU/clock changes + +Switch back to the former used names, to make the legacy switch driver +happy. + +Signed-off-by: Mathias Kresin +--- + arch/mips/lantiq/xway/sysctrl.c | 14 +++++++------- + 1 file changed, 7 insertions(+), 7 deletions(-) + +--- a/arch/mips/lantiq/xway/sysctrl.c ++++ b/arch/mips/lantiq/xway/sysctrl.c +@@ -503,7 +503,7 @@ void __init ltq_soc_init(void) + clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI); + clkdev_add_pmu("1f106a00.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI); + clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL); +- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP); ++ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP); + clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + } else if (of_machine_is_compatible("lantiq,ar10")) { +@@ -511,11 +511,11 @@ void __init ltq_soc_init(void) + ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz()); + clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); + clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1); +- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | ++ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | + PMU_PPE_DP | PMU_PPE_TC); + clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); +- clkdev_add_pmu("1e108000.gswip", "gphy0", 0, 0, PMU_GPHY); +- clkdev_add_pmu("1e108000.gswip", "gphy1", 0, 0, PMU_GPHY); ++ clkdev_add_pmu("1f203020.gphy", NULL, 1, 0, PMU_GPHY); ++ clkdev_add_pmu("1f203068.gphy", NULL, 1, 0, PMU_GPHY); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE); + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); +@@ -534,12 +534,12 @@ void __init ltq_soc_init(void) + clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS); + + clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); +- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, ++ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, + PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | + PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | + PMU_PPE_QSB | PMU_PPE_TOP); +- clkdev_add_pmu("1e108000.gswip", "gphy0", 0, 0, PMU_GPHY); +- clkdev_add_pmu("1e108000.gswip", "gphy1", 0, 0, PMU_GPHY); ++ clkdev_add_pmu("1f203020.gphy", NULL, 0, 0, PMU_GPHY); ++ clkdev_add_pmu("1f203068.gphy", NULL, 0, 0, PMU_GPHY); + clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); diff --git a/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch similarity index 99% rename from target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch rename to target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch index 4e5b55eb3e..6a2143e17e 100644 --- a/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch +++ b/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch @@ -1,43 +1,43 @@ From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 22 Oct 2012 12:22:23 +0200 -Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net +Subject: NET: MIPS: lantiq: adds xrx200 ethernet and switch driver --- drivers/net/ethernet/Kconfig | 8 +- drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/lantiq_pce.h | 163 +++ - drivers/net/ethernet/lantiq_xrx200.c | 1798 +++++++++++++++++++++++++++++++ - drivers/net/ethernet/lantiq_xrx200_sw.h | 1328 +++++++++++++++++++++++ + drivers/net/ethernet/lantiq_xrx200_legacy.c | 1798 +++++++++++++++++++++++++++++++ + drivers/net/ethernet/lantiq_xrx200_legacy.h | 1328 +++++++++++++++++++++++ 5 files changed, 3297 insertions(+), 1 deletion(-) create mode 100644 drivers/net/ethernet/lantiq_pce.h - create mode 100644 drivers/net/ethernet/lantiq_xrx200.c - create mode 100644 drivers/net/ethernet/lantiq_xrx200_sw.h + create mode 100644 drivers/net/ethernet/lantiq_xrx200_legacy.c + create mode 100644 drivers/net/ethernet/lantiq_xrx200_legacy.h --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig -@@ -106,7 +106,13 @@ config LANTIQ_ETOP +@@ -108,7 +108,13 @@ config LANTIQ_ETOP tristate "Lantiq SoC ETOP driver" depends on SOC_TYPE_XWAY ---help--- - Support for the MII0 inside the Lantiq SoC + Support for the MII0 inside the Lantiq ADSL SoC + -+config LANTIQ_XRX200 ++config LANTIQ_XRX200_LEGACY + tristate "Lantiq SoC XRX200 driver" + depends on SOC_TYPE_XWAY + ---help--- + Support for the MII0 inside the Lantiq VDSL SoC - source "drivers/net/ethernet/marvell/Kconfig" - source "drivers/net/ethernet/mediatek/Kconfig" + config LANTIQ_XRX200 + tristate "Lantiq / Intel xRX200 PMAC network driver" --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile -@@ -49,6 +49,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal - obj-$(CONFIG_JME) += jme.o +@@ -51,6 +51,7 @@ obj-$(CONFIG_JME) += jme.o obj-$(CONFIG_KORINA) += korina.o obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o -+obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o + obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o ++obj-$(CONFIG_LANTIQ_XRX200_LEGACY) += lantiq_xrx200_legacy.o obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/ obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ @@ -208,8 +208,8 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net + MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), +}; --- /dev/null -+++ b/drivers/net/ethernet/lantiq_xrx200.c -@@ -0,0 +1,1924 @@ ++++ b/drivers/net/ethernet/lantiq_xrx200_legacy.c +@@ -0,0 +1,1927 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -246,7 +246,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net +#include + +#include "lantiq_pce.h" -+#include "lantiq_xrx200_sw.h" ++#include "lantiq_xrx200_legacy.h" + +#define SW_POLLING +#define SW_ROUTING @@ -1117,6 +1117,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net + if (XRX200_DMA_IS_RX(i)) + napi_enable(&priv->hw->chan[i].napi); + ltq_dma_open(&priv->hw->chan[i].dma); ++ ltq_dma_enable_irq(&priv->hw->chan[i].dma); + } + priv->hw->chan[i].refcount++; + spin_unlock_bh(&priv->hw->chan[i].lock); @@ -1604,16 +1605,18 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net + return PTR_ERR(phydev); + } + -+ phydev->supported &= (SUPPORTED_10baseT_Half -+ | SUPPORTED_10baseT_Full -+ | SUPPORTED_100baseT_Half -+ | SUPPORTED_100baseT_Full -+ | SUPPORTED_1000baseT_Half -+ | SUPPORTED_1000baseT_Full -+ | SUPPORTED_Autoneg -+ | SUPPORTED_MII -+ | SUPPORTED_TP); -+ phydev->advertising = phydev->supported; ++ linkmode_zero(phydev->supported); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, phydev->supported); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_MII_BIT, phydev->supported); ++ linkmode_set_bit_array(phy_10_100_features_array, ++ ARRAY_SIZE(phy_10_100_features_array), ++ phydev->supported); ++ linkmode_set_bit_array(phy_gbit_features_array, ++ ARRAY_SIZE(phy_gbit_features_array), ++ phydev->supported); ++ linkmode_copy(phydev->advertising, phydev->supported); ++ + port->phydev = phydev; + phydev->phy_link_change = xrx200_phy_link_change; + @@ -1970,7 +1973,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net + priv->id = hw->num_devs; + + mac = of_get_mac_address(iface); -+ if (mac) ++ if (!IS_ERR(mac)) + memcpy(priv->mac, mac, ETH_ALEN); + + /* is this the wan interface ? */ @@ -2135,7 +2138,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net +MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet"); +MODULE_LICENSE("GPL"); --- /dev/null -+++ b/drivers/net/ethernet/lantiq_xrx200_sw.h ++++ b/drivers/net/ethernet/lantiq_xrx200_legacy.h @@ -0,0 +1,1328 @@ +/* + * This program is free software; you can redistribute it and/or modify it diff --git a/target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch b/target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch new file mode 100644 index 0000000000..8fd29161fe --- /dev/null +++ b/target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch @@ -0,0 +1,352 @@ +From c8eedcadc38a5e6008d3990fbe0a5285b30335fc Mon Sep 17 00:00:00 2001 +From: Mathias Kresin +Date: Sun, 7 Jul 2019 21:48:56 +0200 +Subject: [PATCH] MIPS: lantiq: Add GPHY Firmware loader + +Upstream, the GPHY Firmware loader has been merged into the DSA switch +driver. But we don't use the driver yet, so bring it back. + +Signed-off-by: Mathias Kresin +--- + .../bindings/mips/lantiq/rcu-gphy.txt | 36 +++ + .../devicetree/bindings/mips/lantiq/rcu.txt | 18 ++ + arch/mips/configs/xway_defconfig | 1 + + arch/mips/lantiq/Kconfig | 4 + + drivers/soc/lantiq/Makefile | 1 + + drivers/soc/lantiq/gphy.c | 224 ++++++++++++++++++ + 6 files changed, 284 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt + create mode 100644 drivers/soc/lantiq/gphy.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt +@@ -0,0 +1,37 @@ ++Lantiq XWAY SoC GPHY binding ++============================ ++ ++This binding describes a software-defined ethernet PHY, provided by the RCU ++module on newer Lantiq XWAY SoCs (xRX200 and newer). ++ ++------------------------------------------------------------------------------- ++Required properties: ++- compatible : Should be one of ++ "lantiq,xrx200-gphy" ++ "lantiq,xrx200a1x-gphy" ++ "lantiq,xrx200a2x-gphy" ++ "lantiq,xrx300-gphy" ++ "lantiq,xrx330-gphy" ++- reg : Addrress of the GPHY FW load address register ++- resets : Must reference the RCU GPHY reset bit ++- reset-names : One entry, value must be "gphy" or optional "gphy2" ++- clocks : A reference to the (PMU) GPHY clock gate ++ ++Optional properties: ++- lantiq,gphy-mode : GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in ++ ++ ++ ++------------------------------------------------------------------------------- ++Example for the GPHys on the xRX200 SoCs: ++ ++#include ++ gphy0: gphy@20 { ++ compatible = "lantiq,xrx200a2x-gphy"; ++ reg = <0x20 0x4>; ++ ++ resets = <&reset0 31 30>, <&reset1 7 7>; ++ reset-names = "gphy", "gphy2"; ++ clocks = <&pmu0 XRX200_PMU_GATE_GPHY>; ++ lantiq,gphy-mode = ; ++ }; +--- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt ++++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt +@@ -26,6 +26,24 @@ Example of the RCU bindings on a xRX200 + ranges = <0x0 0x203000 0x100>; + big-endian; + ++ gphy0: gphy@20 { ++ compatible = "lantiq,xrx200a2x-gphy"; ++ reg = <0x20 0x4>; ++ ++ resets = <&reset0 31 30>, <&reset1 7 7>; ++ reset-names = "gphy", "gphy2"; ++ lantiq,gphy-mode = ; ++ }; ++ ++ gphy1: gphy@68 { ++ compatible = "lantiq,xrx200a2x-gphy"; ++ reg = <0x68 0x4>; ++ ++ resets = <&reset0 29 28>, <&reset1 6 6>; ++ reset-names = "gphy", "gphy2"; ++ lantiq,gphy-mode = ; ++ }; ++ + reset0: reset-controller@10 { + compatible = "lantiq,xrx200-reset"; + reg = <0x10 4>, <0x14 4>; +--- a/arch/mips/configs/xway_defconfig ++++ b/arch/mips/configs/xway_defconfig +@@ -13,6 +13,7 @@ CONFIG_EMBEDDED=y + # CONFIG_COMPAT_BRK is not set + CONFIG_LANTIQ=y + CONFIG_PCI_LANTIQ=y ++CONFIG_XRX200_PHY_FW=y + CONFIG_CPU_MIPS32_R2=y + CONFIG_MIPS_VPE_LOADER=y + CONFIG_NR_CPUS=2 +--- a/arch/mips/lantiq/Kconfig ++++ b/arch/mips/lantiq/Kconfig +@@ -62,4 +62,8 @@ config PCIE_LANTIQ_MSI + depends on PCIE_LANTIQ && PCI_MSI + default y + ++config XRX200_PHY_FW ++ bool "XRX200 PHY firmware loader" ++ depends on SOC_XWAY ++ + endif +--- a/drivers/soc/lantiq/Makefile ++++ b/drivers/soc/lantiq/Makefile +@@ -1,2 +1,3 @@ + # SPDX-License-Identifier: GPL-2.0-only + obj-y += fpi-bus.o ++obj-$(CONFIG_XRX200_PHY_FW) += gphy.o +--- /dev/null ++++ b/drivers/soc/lantiq/gphy.c +@@ -0,0 +1,235 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * Copyright (C) 2012 John Crispin ++ * Copyright (C) 2016 Martin Blumenstingl ++ * Copyright (C) 2017 Hauke Mehrtens ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define XRX200_GPHY_FW_ALIGN (16 * 1024) ++ ++struct xway_gphy_priv { ++ struct clk *gphy_clk_gate; ++ struct reset_control *gphy_reset; ++ struct reset_control *gphy_reset2; ++ void __iomem *membase; ++ char *fw_name; ++}; ++ ++struct xway_gphy_match_data { ++ char *fe_firmware_name; ++ char *ge_firmware_name; ++}; ++ ++static const struct xway_gphy_match_data xrx200a1x_gphy_data = { ++ .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin", ++ .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin", ++}; ++ ++static const struct xway_gphy_match_data xrx200a2x_gphy_data = { ++ .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin", ++ .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin", ++}; ++ ++static const struct xway_gphy_match_data xrx300_gphy_data = { ++ .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin", ++ .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin", ++}; ++ ++static const struct of_device_id xway_gphy_match[] = { ++ { .compatible = "lantiq,xrx200-gphy", .data = NULL }, ++ { .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data }, ++ { .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data }, ++ { .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data }, ++ { .compatible = "lantiq,xrx330-gphy", .data = &xrx300_gphy_data }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, xway_gphy_match); ++ ++static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv, ++ dma_addr_t *dev_addr) ++{ ++ const struct firmware *fw; ++ void *fw_addr; ++ dma_addr_t dma_addr; ++ size_t size; ++ int ret; ++ ++ ret = request_firmware(&fw, priv->fw_name, dev); ++ if (ret) { ++ dev_err(dev, "failed to load firmware: %s, error: %i\n", ++ priv->fw_name, ret); ++ return ret; ++ } ++ ++ /* ++ * GPHY cores need the firmware code in a persistent and contiguous ++ * memory area with a 16 kB boundary aligned start address. ++ */ ++ size = fw->size + XRX200_GPHY_FW_ALIGN; ++ ++ fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL); ++ if (fw_addr) { ++ fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN); ++ *dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN); ++ memcpy(fw_addr, fw->data, fw->size); ++ } else { ++ dev_err(dev, "failed to alloc firmware memory\n"); ++ ret = -ENOMEM; ++ } ++ ++ release_firmware(fw); ++ ++ return ret; ++} ++ ++static int xway_gphy_of_probe(struct platform_device *pdev, ++ struct xway_gphy_priv *priv) ++{ ++ struct device *dev = &pdev->dev; ++ const struct xway_gphy_match_data *gphy_fw_name_cfg; ++ u32 gphy_mode; ++ int ret; ++ struct resource *res_gphy; ++ ++ gphy_fw_name_cfg = of_device_get_match_data(dev); ++ ++ if (of_device_is_compatible(pdev->dev.of_node, "lantiq,xrx200-gphy")) ++ switch (ltq_soc_type()) { ++ case SOC_TYPE_VR9: ++ gphy_fw_name_cfg = &xrx200a1x_gphy_data; ++ break; ++ case SOC_TYPE_VR9_2: ++ gphy_fw_name_cfg = &xrx200a2x_gphy_data; ++ break; ++ } ++ ++ priv->gphy_clk_gate = devm_clk_get(dev, NULL); ++ if (IS_ERR(priv->gphy_clk_gate)) { ++ dev_err(dev, "Failed to lookup gate clock\n"); ++ return PTR_ERR(priv->gphy_clk_gate); ++ } ++ ++ res_gphy = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ priv->membase = devm_ioremap_resource(dev, res_gphy); ++ if (IS_ERR(priv->membase)) ++ return PTR_ERR(priv->membase); ++ ++ priv->gphy_reset = devm_reset_control_get(dev, "gphy"); ++ if (IS_ERR(priv->gphy_reset)) { ++ if (PTR_ERR(priv->gphy_reset) != -EPROBE_DEFER) ++ dev_err(dev, "Failed to lookup gphy reset\n"); ++ return PTR_ERR(priv->gphy_reset); ++ } ++ ++ priv->gphy_reset2 = devm_reset_control_get_optional(dev, "gphy2"); ++ if (IS_ERR(priv->gphy_reset2)) ++ return PTR_ERR(priv->gphy_reset2); ++ ++ ret = device_property_read_u32(dev, "lantiq,gphy-mode", &gphy_mode); ++ /* Default to GE mode */ ++ if (ret) ++ gphy_mode = GPHY_MODE_GE; ++ ++ switch (gphy_mode) { ++ case GPHY_MODE_FE: ++ priv->fw_name = gphy_fw_name_cfg->fe_firmware_name; ++ break; ++ case GPHY_MODE_GE: ++ priv->fw_name = gphy_fw_name_cfg->ge_firmware_name; ++ break; ++ default: ++ dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int xway_gphy_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct xway_gphy_priv *priv; ++ dma_addr_t fw_addr = 0; ++ int ret; ++ ++ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ ret = xway_gphy_of_probe(pdev, priv); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(priv->gphy_clk_gate); ++ if (ret) ++ return ret; ++ ++ ret = xway_gphy_load(dev, priv, &fw_addr); ++ if (ret) { ++ clk_disable_unprepare(priv->gphy_clk_gate); ++ return ret; ++ } ++ ++ reset_control_assert(priv->gphy_reset); ++ reset_control_assert(priv->gphy_reset2); ++ ++ iowrite32be(fw_addr, priv->membase); ++ ++ reset_control_deassert(priv->gphy_reset); ++ reset_control_deassert(priv->gphy_reset2); ++ ++ platform_set_drvdata(pdev, priv); ++ ++ return ret; ++} ++ ++static int xway_gphy_remove(struct platform_device *pdev) ++{ ++ struct xway_gphy_priv *priv = platform_get_drvdata(pdev); ++ ++ iowrite32be(0, priv->membase); ++ ++ clk_disable_unprepare(priv->gphy_clk_gate); ++ ++ return 0; ++} ++ ++static struct platform_driver xway_gphy_driver = { ++ .probe = xway_gphy_probe, ++ .remove = xway_gphy_remove, ++ .driver = { ++ .name = "xway-rcu-gphy", ++ .of_match_table = xway_gphy_match, ++ }, ++}; ++ ++module_platform_driver(xway_gphy_driver); ++ ++MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin"); ++MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin"); ++MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin"); ++MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin"); ++MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin"); ++MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin"); ++MODULE_AUTHOR("Martin Blumenstingl "); ++MODULE_DESCRIPTION("Lantiq XWAY GPHY Firmware Loader"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/patches-5.4/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-5.4/0028-NET-lantiq-various-etop-fixes.patch index a336af8a3c..094496a16d 100644 --- a/target/linux/lantiq/patches-5.4/0028-NET-lantiq-various-etop-fixes.patch +++ b/target/linux/lantiq/patches-5.4/0028-NET-lantiq-various-etop-fixes.patch @@ -10,16 +10,16 @@ Signed-off-by: John Crispin --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c -@@ -11,7 +11,7 @@ - * You should have received a copy of the GNU General Public License - * along with this program; if not, see . +@@ -1,7 +1,7 @@ + // SPDX-License-Identifier: GPL-2.0-only + /* * - * Copyright (C) 2011 John Crispin + * Copyright (C) 2011-12 John Crispin */ #include -@@ -30,11 +30,16 @@ +@@ -20,11 +20,16 @@ #include #include #include @@ -36,7 +36,7 @@ Signed-off-by: John Crispin #include -@@ -42,7 +47,7 @@ +@@ -32,7 +37,7 @@ #include #include @@ -45,7 +45,7 @@ Signed-off-by: John Crispin #define MDIO_REQUEST 0x80000000 #define MDIO_READ 0x40000000 #define MDIO_ADDR_MASK 0x1f -@@ -51,44 +56,91 @@ +@@ -41,44 +46,91 @@ #define MDIO_REG_OFFSET 0x10 #define MDIO_VAL_MASK 0xffff @@ -152,7 +152,7 @@ Signed-off-by: John Crispin struct net_device *netdev; struct napi_struct napi; struct ltq_dma_channel dma; -@@ -98,23 +150,36 @@ struct ltq_etop_chan { +@@ -88,23 +140,36 @@ struct ltq_etop_chan { struct ltq_etop_priv { struct net_device *netdev; struct platform_device *pdev; @@ -194,7 +194,7 @@ Signed-off-by: John Crispin if (!ch->skb[ch->dma.desc]) return -ENOMEM; ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(&priv->pdev->dev, -@@ -149,8 +214,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan +@@ -139,8 +204,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan spin_unlock_irqrestore(&priv->lock, flags); skb_put(skb, len); @@ -206,7 +206,7 @@ Signed-off-by: John Crispin } static int -@@ -158,7 +226,9 @@ ltq_etop_poll_rx(struct napi_struct *nap +@@ -148,7 +216,9 @@ ltq_etop_poll_rx(struct napi_struct *nap { struct ltq_etop_chan *ch = container_of(napi, struct ltq_etop_chan, napi); @@ -216,7 +216,7 @@ Signed-off-by: John Crispin while (work_done < budget) { struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -@@ -170,7 +240,9 @@ ltq_etop_poll_rx(struct napi_struct *nap +@@ -160,7 +230,9 @@ ltq_etop_poll_rx(struct napi_struct *nap } if (work_done < budget) { napi_complete_done(&ch->napi, work_done); @@ -226,7 +226,7 @@ Signed-off-by: John Crispin } return work_done; } -@@ -182,12 +254,14 @@ ltq_etop_poll_tx(struct napi_struct *nap +@@ -172,12 +244,14 @@ ltq_etop_poll_tx(struct napi_struct *nap container_of(napi, struct ltq_etop_chan, napi); struct ltq_etop_priv *priv = netdev_priv(ch->netdev); struct netdev_queue *txq = @@ -242,7 +242,7 @@ Signed-off-by: John Crispin dev_kfree_skb_any(ch->skb[ch->tx_free]); ch->skb[ch->tx_free] = NULL; memset(&ch->dma.desc_base[ch->tx_free], 0, -@@ -200,7 +274,9 @@ ltq_etop_poll_tx(struct napi_struct *nap +@@ -190,7 +264,9 @@ ltq_etop_poll_tx(struct napi_struct *nap if (netif_tx_queue_stopped(txq)) netif_tx_start_queue(txq); napi_complete(&ch->napi); @@ -252,7 +252,7 @@ Signed-off-by: John Crispin return 1; } -@@ -208,9 +284,10 @@ static irqreturn_t +@@ -198,9 +274,10 @@ static irqreturn_t ltq_etop_dma_irq(int irq, void *_priv) { struct ltq_etop_priv *priv = _priv; @@ -266,7 +266,7 @@ Signed-off-by: John Crispin return IRQ_HANDLED; } -@@ -222,7 +299,7 @@ ltq_etop_free_channel(struct net_device +@@ -212,7 +289,7 @@ ltq_etop_free_channel(struct net_device ltq_dma_free(&ch->dma); if (ch->dma.irq) free_irq(ch->dma.irq, priv); @@ -275,7 +275,7 @@ Signed-off-by: John Crispin int desc; for (desc = 0; desc < LTQ_DESC_NUM; desc++) dev_kfree_skb_any(ch->skb[ch->dma.desc]); -@@ -233,66 +310,135 @@ static void +@@ -223,66 +300,135 @@ static void ltq_etop_hw_exit(struct net_device *dev) { struct ltq_etop_priv *priv = netdev_priv(dev); @@ -331,10 +331,11 @@ Signed-off-by: John Crispin struct ltq_etop_priv *priv = netdev_priv(dev); - int i; + int mii_mode = priv->mii_mode; -+ -+ clk_enable(priv->clk_ppe); - ltq_pmu_enable(PMU_PPE); ++ clk_enable(priv->clk_ppe); + +- switch (priv->pldata->mii_mode) { + if (of_machine_is_compatible("lantiq,ar9")) { + ltq_etop_gbit_init(dev); + /* force the etops link to the gbit to MII */ @@ -343,8 +344,7 @@ Signed-off-by: John Crispin + ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG); + ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX | + MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG); - -- switch (priv->pldata->mii_mode) { ++ + switch (mii_mode) { case PHY_INTERFACE_MODE_RMII: - ltq_etop_w32_mask(ETOP_MII_MASK, @@ -446,7 +446,7 @@ Signed-off-by: John Crispin } static void -@@ -311,6 +457,39 @@ static const struct ethtool_ops ltq_etop +@@ -301,6 +447,39 @@ static const struct ethtool_ops ltq_etop }; static int @@ -486,7 +486,7 @@ Signed-off-by: John Crispin ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data) { u32 val = MDIO_REQUEST | -@@ -318,9 +497,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in +@@ -308,9 +487,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) | phy_data; @@ -498,7 +498,7 @@ Signed-off-by: John Crispin return 0; } -@@ -331,12 +510,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in +@@ -321,12 +500,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in ((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) | ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET); @@ -515,17 +515,9 @@ Signed-off-by: John Crispin return val; } -@@ -351,8 +530,18 @@ ltq_etop_mdio_probe(struct net_device *d - { +@@ -342,7 +521,10 @@ ltq_etop_mdio_probe(struct net_device *d struct ltq_etop_priv *priv = netdev_priv(dev); struct phy_device *phydev; -+ u32 phy_supported = (SUPPORTED_10baseT_Half -+ | SUPPORTED_10baseT_Full -+ | SUPPORTED_100baseT_Half -+ | SUPPORTED_100baseT_Full -+ | SUPPORTED_Autoneg -+ | SUPPORTED_MII -+ | SUPPORTED_TP); - phydev = phy_find_first(priv->mii_bus); + if (of_machine_is_compatible("lantiq,ase")) @@ -535,7 +527,7 @@ Signed-off-by: John Crispin if (!phydev) { netdev_err(dev, "no PHY found\n"); -@@ -360,21 +549,18 @@ ltq_etop_mdio_probe(struct net_device *d +@@ -350,14 +532,17 @@ ltq_etop_mdio_probe(struct net_device *d } phydev = phy_connect(dev, phydev_name(phydev), @@ -547,22 +539,15 @@ Signed-off-by: John Crispin return PTR_ERR(phydev); } -- phydev->supported &= (SUPPORTED_10baseT_Half -- | SUPPORTED_10baseT_Full -- | SUPPORTED_100baseT_Half -- | SUPPORTED_100baseT_Full -- | SUPPORTED_Autoneg -- | SUPPORTED_MII -- | SUPPORTED_TP); +- phy_set_max_speed(phydev, SPEED_100); + if (of_machine_is_compatible("lantiq,ar9")) -+ phy_supported |= SUPPORTED_1000baseT_Half -+ | SUPPORTED_1000baseT_Full; ++ phy_set_max_speed(phydev, SPEED_1000); ++ else ++ phy_set_max_speed(phydev, SPEED_100); -+ phydev->supported &= phy_supported; - phydev->advertising = phydev->supported; phy_attached_info(phydev); -@@ -395,8 +581,13 @@ ltq_etop_mdio_init(struct net_device *de +@@ -378,8 +563,13 @@ ltq_etop_mdio_init(struct net_device *de } priv->mii_bus->priv = dev; @@ -578,7 +563,7 @@ Signed-off-by: John Crispin priv->mii_bus->name = "ltq_mii"; snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", priv->pdev->name, priv->pdev->id); -@@ -433,17 +624,19 @@ static int +@@ -416,18 +606,21 @@ static int ltq_etop_open(struct net_device *dev) { struct ltq_etop_priv *priv = netdev_priv(dev); @@ -592,7 +577,9 @@ Signed-off-by: John Crispin + + spin_lock_irqsave(&priv->lock, flags); + ltq_dma_open(&priv->txch.dma); ++ ltq_dma_enable_irq(&priv->txch.dma); + ltq_dma_open(&priv->rxch.dma); ++ ltq_dma_enable_irq(&priv->rxch.dma); + spin_unlock_irqrestore(&priv->lock, flags); + + if (dev->phydev) @@ -601,13 +588,14 @@ Signed-off-by: John Crispin - if (!IS_TX(i) && (!IS_RX(i))) - continue; - ltq_dma_open(&ch->dma); +- ltq_dma_enable_irq(&ch->dma); - napi_enable(&ch->napi); - } - phy_start(dev->phydev); netif_tx_start_all_queues(dev); return 0; } -@@ -452,18 +645,19 @@ static int +@@ -436,18 +629,19 @@ static int ltq_etop_stop(struct net_device *dev) { struct ltq_etop_priv *priv = netdev_priv(dev); @@ -637,7 +625,7 @@ Signed-off-by: John Crispin return 0; } -@@ -473,16 +667,16 @@ ltq_etop_tx(struct sk_buff *skb, struct +@@ -457,16 +651,16 @@ ltq_etop_tx(struct sk_buff *skb, struct int queue = skb_get_queue_mapping(skb); struct netdev_queue *txq = netdev_get_tx_queue(dev, queue); struct ltq_etop_priv *priv = netdev_priv(dev); @@ -659,7 +647,7 @@ Signed-off-by: John Crispin netdev_err(dev, "tx ring full\n"); netif_tx_stop_queue(txq); return NETDEV_TX_BUSY; -@@ -490,7 +684,7 @@ ltq_etop_tx(struct sk_buff *skb, struct +@@ -474,7 +668,7 @@ ltq_etop_tx(struct sk_buff *skb, struct /* dma needs to start on a 16 byte aligned address */ byte_offset = CPHYSADDR(skb->data) % 16; @@ -668,7 +656,7 @@ Signed-off-by: John Crispin netif_trans_update(dev); -@@ -500,11 +694,11 @@ ltq_etop_tx(struct sk_buff *skb, struct +@@ -484,11 +678,11 @@ ltq_etop_tx(struct sk_buff *skb, struct wmb(); desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); @@ -683,7 +671,7 @@ Signed-off-by: John Crispin netif_tx_stop_queue(txq); return NETDEV_TX_OK; -@@ -515,11 +709,14 @@ ltq_etop_change_mtu(struct net_device *d +@@ -499,11 +693,14 @@ ltq_etop_change_mtu(struct net_device *d { struct ltq_etop_priv *priv = netdev_priv(dev); unsigned long flags; @@ -699,7 +687,7 @@ Signed-off-by: John Crispin spin_unlock_irqrestore(&priv->lock, flags); return 0; -@@ -579,6 +776,9 @@ ltq_etop_init(struct net_device *dev) +@@ -563,6 +760,9 @@ ltq_etop_init(struct net_device *dev) if (err) goto err_hw; ltq_etop_change_mtu(dev, 1500); @@ -709,7 +697,7 @@ Signed-off-by: John Crispin memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr)); if (!is_valid_ether_addr(mac.sa_data)) { -@@ -596,9 +796,10 @@ ltq_etop_init(struct net_device *dev) +@@ -580,9 +780,10 @@ ltq_etop_init(struct net_device *dev) dev->addr_assign_type = NET_ADDR_RANDOM; ltq_etop_set_multicast_list(dev); @@ -723,7 +711,7 @@ Signed-off-by: John Crispin return 0; err_netdev: -@@ -618,6 +819,9 @@ ltq_etop_tx_timeout(struct net_device *d +@@ -602,6 +803,9 @@ ltq_etop_tx_timeout(struct net_device *d err = ltq_etop_hw_init(dev); if (err) goto err_hw; @@ -733,7 +721,7 @@ Signed-off-by: John Crispin netif_trans_update(dev); netif_wake_queue(dev); return; -@@ -641,14 +845,19 @@ static const struct net_device_ops ltq_e +@@ -625,14 +829,19 @@ static const struct net_device_ops ltq_e .ndo_tx_timeout = ltq_etop_tx_timeout, }; @@ -757,7 +745,7 @@ Signed-off-by: John Crispin res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { -@@ -674,31 +883,62 @@ ltq_etop_probe(struct platform_device *p +@@ -658,31 +867,62 @@ ltq_etop_probe(struct platform_device *p goto err_out; } @@ -835,7 +823,7 @@ Signed-off-by: John Crispin err = register_netdev(dev); if (err) -@@ -727,31 +967,22 @@ ltq_etop_remove(struct platform_device * +@@ -711,31 +951,22 @@ ltq_etop_remove(struct platform_device * return 0; } diff --git a/target/linux/lantiq/patches-5.4/0030-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-5.4/0030-GPIO-add-named-gpio-exports.patch index 8e3060d768..419516978c 100644 --- a/target/linux/lantiq/patches-5.4/0030-GPIO-add-named-gpio-exports.patch +++ b/target/linux/lantiq/patches-5.4/0030-GPIO-add-named-gpio-exports.patch @@ -13,7 +13,7 @@ Signed-off-by: John Crispin --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c -@@ -23,6 +23,8 @@ +@@ -19,6 +19,8 @@ #include #include #include @@ -21,9 +21,9 @@ Signed-off-by: John Crispin +#include #include "gpiolib.h" - -@@ -660,3 +662,72 @@ void of_gpiochip_remove(struct gpio_chip - gpiochip_remove_pin_ranges(chip); + #include "gpiolib-of.h" +@@ -915,3 +917,72 @@ void of_gpiochip_remove(struct gpio_chip + { of_node_put(chip->of_node); } + @@ -112,7 +112,7 @@ Signed-off-by: John Crispin { --- a/include/linux/gpio/consumer.h +++ b/include/linux/gpio/consumer.h -@@ -533,6 +533,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_ +@@ -668,6 +668,7 @@ static inline void devm_acpi_dev_remove_ #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) @@ -120,7 +120,7 @@ Signed-off-by: John Crispin int gpiod_export(struct gpio_desc *desc, bool direction_may_change); int gpiod_export_link(struct device *dev, const char *name, struct gpio_desc *desc); -@@ -540,6 +541,13 @@ void gpiod_unexport(struct gpio_desc *de +@@ -675,6 +676,13 @@ void gpiod_unexport(struct gpio_desc *de #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ @@ -136,7 +136,7 @@ Signed-off-by: John Crispin { --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c -@@ -568,7 +568,7 @@ static struct class gpio_class = { +@@ -563,7 +563,7 @@ static struct class gpio_class = { * * Returns zero on success, else an error. */ @@ -145,7 +145,7 @@ Signed-off-by: John Crispin { struct gpio_chip *chip; struct gpio_device *gdev; -@@ -630,6 +630,8 @@ int gpiod_export(struct gpio_desc *desc, +@@ -625,6 +625,8 @@ int gpiod_export(struct gpio_desc *desc, offset = gpio_chip_hwgpio(desc); if (chip->names && chip->names[offset]) ioname = chip->names[offset]; @@ -154,7 +154,7 @@ Signed-off-by: John Crispin dev = device_create_with_groups(&gpio_class, &gdev->dev, MKDEV(0, 0), data, gpio_groups, -@@ -651,6 +653,12 @@ err_unlock: +@@ -646,6 +648,12 @@ err_unlock: gpiod_dbg(desc, "%s: status %d\n", __func__, status); return status; } diff --git a/target/linux/lantiq/patches-5.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-5.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch index eed32d3097..2493da32ec 100644 --- a/target/linux/lantiq/patches-5.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch +++ b/target/linux/lantiq/patches-5.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch @@ -18,7 +18,7 @@ Signed-off-by: John Crispin --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -691,6 +691,16 @@ config I2C_MESON +@@ -729,6 +729,16 @@ config I2C_MESON If you say yes to this option, support will be included for the I2C interface on the Amlogic Meson family of SoCs. @@ -37,7 +37,7 @@ Signed-off-by: John Crispin depends on PPC --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile -@@ -67,6 +67,7 @@ obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-l +@@ -73,6 +73,7 @@ obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-l obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o diff --git a/target/linux/lantiq/patches-5.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-5.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch index a382b9117c..82567be690 100644 --- a/target/linux/lantiq/patches-5.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch +++ b/target/linux/lantiq/patches-5.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch @@ -16,7 +16,7 @@ Signed-off-by: John Crispin --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h -@@ -104,5 +104,8 @@ int xrx200_gphy_boot(struct device *dev, +@@ -102,5 +102,8 @@ int xrx200_gphy_boot(struct device *dev, extern void ltq_pmu_enable(unsigned int module); extern void ltq_pmu_disable(unsigned int module); @@ -27,7 +27,7 @@ Signed-off-by: John Crispin #endif /* _LTQ_XWAY_H__ */ --- a/arch/mips/lantiq/xway/Makefile +++ b/arch/mips/lantiq/xway/Makefile -@@ -7,3 +7,6 @@ obj-y += timer.o +@@ -8,3 +8,6 @@ obj-y += timer.o endif obj-y += vmmc.o @@ -203,7 +203,7 @@ Signed-off-by: John Crispin +early_param("ethaddr", setup_ethaddr); --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c -@@ -780,7 +780,11 @@ ltq_etop_init(struct net_device *dev) +@@ -764,7 +764,11 @@ ltq_etop_init(struct net_device *dev) if (err) goto err_hw; diff --git a/target/linux/lantiq/patches-5.4/0042-arch-mips-increase-io_space_limit.patch b/target/linux/lantiq/patches-5.4/0042-arch-mips-increase-io_space_limit.patch index 7165dd0070..7c0d10ed10 100644 --- a/target/linux/lantiq/patches-5.4/0042-arch-mips-increase-io_space_limit.patch +++ b/target/linux/lantiq/patches-5.4/0042-arch-mips-increase-io_space_limit.patch @@ -12,7 +12,7 @@ Signed-off-by: John Crispin --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h -@@ -52,7 +52,7 @@ +@@ -53,7 +53,7 @@ /* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */ diff --git a/target/linux/lantiq/patches-5.4/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch b/target/linux/lantiq/patches-5.4/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch index fed65e5321..d63d48ad1f 100644 --- a/target/linux/lantiq/patches-5.4/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch +++ b/target/linux/lantiq/patches-5.4/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch @@ -23,7 +23,7 @@ Signed-off-by: Hauke Mehrtens --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c -@@ -91,7 +91,14 @@ static void dwc2_set_rk_params(struct dw +@@ -92,7 +92,14 @@ static void dwc2_set_rk_params(struct dw p->power_down = 0; } @@ -39,7 +39,7 @@ Signed-off-by: Hauke Mehrtens { struct dwc2_core_params *p = &hsotg->params; -@@ -99,12 +106,20 @@ static void dwc2_set_ltq_params(struct d +@@ -100,12 +107,20 @@ static void dwc2_set_ltq_params(struct d p->host_rx_fifo_size = 288; p->host_nperio_tx_fifo_size = 128; p->host_perio_tx_fifo_size = 96; @@ -62,7 +62,7 @@ Signed-off-by: Hauke Mehrtens static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg) { struct dwc2_core_params *p = &hsotg->params; -@@ -156,8 +171,11 @@ const struct of_device_id dwc2_of_match_ +@@ -167,8 +182,11 @@ const struct of_device_id dwc2_of_match_ { .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params }, { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params }, { .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params }, diff --git a/target/linux/lantiq/patches-5.4/0051-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-5.4/0051-MIPS-lantiq-improve-USB-initialization.patch index a7bdafd704..3f276e1158 100644 --- a/target/linux/lantiq/patches-5.4/0051-MIPS-lantiq-improve-USB-initialization.patch +++ b/target/linux/lantiq/patches-5.4/0051-MIPS-lantiq-improve-USB-initialization.patch @@ -15,7 +15,7 @@ Signed-off-by: Hauke Mehrtens --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -246,6 +246,25 @@ static void pmu_disable(struct clk *clk) +@@ -244,6 +244,25 @@ static void pmu_disable(struct clk *clk) pr_warn("deactivating PMU module failed!"); } @@ -41,7 +41,7 @@ Signed-off-by: Hauke Mehrtens /* the pci enable helper */ static int pci_enable(struct clk *clk) { -@@ -567,4 +586,5 @@ void __init ltq_soc_init(void) +@@ -565,4 +584,5 @@ void __init ltq_soc_init(void) clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); } diff --git a/target/linux/lantiq/patches-5.4/0101-find_active_root.patch b/target/linux/lantiq/patches-5.4/0101-find_active_root.patch index f48b5b7c65..b6b4ab7409 100644 --- a/target/linux/lantiq/patches-5.4/0101-find_active_root.patch +++ b/target/linux/lantiq/patches-5.4/0101-find_active_root.patch @@ -1,6 +1,6 @@ ---- a/drivers/mtd/ofpart.c -+++ b/drivers/mtd/ofpart.c -@@ -25,6 +25,38 @@ static bool node_has_compatible(struct d +--- a/drivers/mtd/parsers/ofpart.c ++++ b/drivers/mtd/parsers/ofpart.c +@@ -21,6 +21,38 @@ static bool node_has_compatible(struct d return of_get_property(pp, "compatible", NULL); } @@ -39,7 +39,7 @@ static int parse_fixed_partitions(struct mtd_info *master, const struct mtd_partition **pparts, struct mtd_part_parser_data *data) -@@ -36,7 +68,8 @@ static int parse_fixed_partitions(struct +@@ -32,7 +64,8 @@ static int parse_fixed_partitions(struct struct device_node *pp; int nr_parts, i, ret = 0; bool dedicated = true; @@ -49,7 +49,7 @@ /* Pull of_node from the master device node */ mtd_node = mtd_get_of_node(master); -@@ -72,7 +105,9 @@ static int parse_fixed_partitions(struct +@@ -68,7 +101,9 @@ static int parse_fixed_partitions(struct return 0; parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL); @@ -60,7 +60,7 @@ return -ENOMEM; i = 0; -@@ -121,12 +156,22 @@ static int parse_fixed_partitions(struct +@@ -117,12 +152,22 @@ static int parse_fixed_partitions(struct if (of_get_property(pp, "lock", &len)) parts[i].mask_flags |= MTD_POWERUP_LOCK; @@ -83,7 +83,7 @@ *pparts = parts; return nr_parts; -@@ -137,6 +182,7 @@ ofpart_fail: +@@ -133,6 +178,7 @@ ofpart_fail: ofpart_none: of_node_put(pp); kfree(parts); diff --git a/target/linux/lantiq/patches-5.4/0151-lantiq-ifxmips_pcie-use-of.patch b/target/linux/lantiq/patches-5.4/0151-lantiq-ifxmips_pcie-use-of.patch index b081871191..bc02a58b1c 100644 --- a/target/linux/lantiq/patches-5.4/0151-lantiq-ifxmips_pcie-use-of.patch +++ b/target/linux/lantiq/patches-5.4/0151-lantiq-ifxmips_pcie-use-of.patch @@ -1,7 +1,13 @@ --- a/arch/mips/pci/ifxmips_pcie.c +++ b/arch/mips/pci/ifxmips_pcie.c -@@ -18,6 +18,9 @@ +@@ -16,8 +16,15 @@ + #include + #include #include ++#include ++#include ++#include ++#include #include +#include @@ -10,15 +16,18 @@ #include "ifxmips_pcie.h" #include "ifxmips_pcie_reg.h" -@@ -40,6 +43,7 @@ +@@ -40,6 +47,10 @@ static DEFINE_SPINLOCK(ifx_pcie_lock); u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG); +static int pcie_reset_gpio; ++static struct phy *ltq_pcie_phy; ++static struct reset_control *ltq_pcie_reset; ++static struct regmap *ltq_rcu_regmap; static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = { { -@@ -82,6 +86,22 @@ void ifx_pcie_debug(const char *fmt, ... +@@ -82,6 +93,22 @@ void ifx_pcie_debug(const char *fmt, ... printk("%s", buf); } @@ -41,7 +50,80 @@ static inline int pcie_ltssm_enable(int pcie_port) { -@@ -1045,17 +1065,52 @@ pcie_rc_initialize(int pcie_port) +@@ -988,10 +1015,22 @@ int ifx_pcie_bios_plat_dev_init(struct + static int + pcie_rc_initialize(int pcie_port) + { +- int i; ++ int i, ret; + #define IFX_PCIE_PHY_LOOP_CNT 5 + +- pcie_rcu_endian_setup(pcie_port); ++ regmap_update_bits(ltq_rcu_regmap, 0x4c, IFX_RCU_AHB_BE_PCIE_M, ++ IFX_RCU_AHB_BE_PCIE_M); ++ ++#ifdef CONFIG_IFX_PCIE_HW_SWAP ++ regmap_update_bits(ltq_rcu_regmap, 0x4c, IFX_RCU_AHB_BE_PCIE_S, ++ IFX_RCU_AHB_BE_PCIE_S); ++#else ++ regmap_update_bits(ltq_rcu_regmap, 0x4c, IFX_RCU_AHB_BE_PCIE_S, ++ 0x0); ++#endif ++ ++ regmap_update_bits(ltq_rcu_regmap, 0x4c, IFX_RCU_AHB_BE_XBAR_M, ++ 0x0); + + pcie_ep_gpio_rst_init(pcie_port); + +@@ -1000,26 +1039,21 @@ pcie_rc_initialize(int pcie_port) + * reset PCIe PHY will solve this issue + */ + for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) { +- /* Disable PCIe PHY Analog part for sanity check */ +- pcie_phy_pmu_disable(pcie_port); +- +- pcie_phy_rst_assert(pcie_port); +- pcie_phy_rst_deassert(pcie_port); +- +- /* Make sure PHY PLL is stable */ +- udelay(20); +- +- /* PCIe Core reset enabled, low active, sw programmed */ +- pcie_core_rst_assert(pcie_port); ++ ret = phy_init(ltq_pcie_phy); ++ if (ret) ++ continue; + + /* Put PCIe EP in reset status */ + pcie_device_rst_assert(pcie_port); + +- /* PCI PHY & Core reset disabled, high active, sw programmed */ +- pcie_core_rst_deassert(pcie_port); ++ udelay(1); ++ reset_control_deassert(ltq_pcie_reset); + +- /* Already in a quiet state, program PLL, enable PHY, check ready bit */ +- pcie_phy_clock_mode_setup(pcie_port); ++ ret = phy_power_on(ltq_pcie_phy); ++ if (ret) { ++ phy_exit(ltq_pcie_phy); ++ continue; ++ } + + /* Enable PCIe PHY and Clock */ + pcie_core_pmu_setup(pcie_port); +@@ -1035,6 +1069,10 @@ pcie_rc_initialize(int pcie_port) + /* Once link is up, break out */ + if (pcie_app_loigc_setup(pcie_port) == 0) + break; ++ ++ phy_power_off(ltq_pcie_phy); ++ reset_control_assert(ltq_pcie_reset); ++ phy_exit(ltq_pcie_phy); + } + if (i >= IFX_PCIE_PHY_LOOP_CNT) { + printk(KERN_ERR "%s link up failed!!!!!\n", __func__); +@@ -1045,17 +1083,67 @@ pcie_rc_initialize(int pcie_port) return 0; } @@ -52,7 +134,6 @@ void __iomem *io_map_base; int pcie_port; int startup_port; - + struct device_node *np; + struct pci_bus *bus; + @@ -76,13 +157,29 @@ + if (!bus) + return -EPROBE_DEFER; + } -+ + /* Enable AHB Master/ Slave */ pcie_ahb_pmu_setup(); startup_port = IFX_PCIE_PORT0; - + ++ ltq_pcie_phy = devm_phy_get(&pdev->dev, "pcie"); ++ if (IS_ERR(ltq_pcie_phy)) { ++ dev_err(&pdev->dev, "failed to get the PCIe PHY\n"); ++ return PTR_ERR(ltq_pcie_phy); ++ } ++ ++ ltq_pcie_reset = devm_reset_control_get_shared(&pdev->dev, NULL); ++ if (IS_ERR(ltq_pcie_reset)) { ++ dev_err(&pdev->dev, "failed to get the PCIe reset line\n"); ++ return PTR_ERR(ltq_pcie_reset); ++ } ++ ++ ltq_rcu_regmap = syscon_regmap_lookup_by_phandle(node, "lantiq,rcu"); ++ if (IS_ERR(ltq_rcu_regmap)) ++ return PTR_ERR(ltq_rcu_regmap); ++ + pcie_reset_gpio = of_get_named_gpio(node, "gpio-reset", 0); + if (gpio_is_valid(pcie_reset_gpio)) { + int ret = devm_gpio_request(&pdev->dev, pcie_reset_gpio, "pcie-reset"); @@ -96,7 +193,7 @@ for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){ if (pcie_rc_initialize(pcie_port) == 0) { IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", -@@ -1067,6 +1122,7 @@ static int __init ifx_pcie_bios_init(voi +@@ -1067,6 +1155,7 @@ static int __init ifx_pcie_bios_init(voi return -ENOMEM; } ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base; @@ -104,7 +201,7 @@ register_pci_controller(&ifx_pcie_controller[pcie_port].pcic); /* XXX, clear error status */ -@@ -1083,6 +1139,30 @@ static int __init ifx_pcie_bios_init(voi +@@ -1083,6 +1172,30 @@ static int __init ifx_pcie_bios_init(voi return 0; } @@ -168,10 +265,98 @@ static inline void pcie_ahb_pmu_setup(void) { /* Enable AHB bus master/slave */ -@@ -180,20 +163,6 @@ static inline void pcie_phy_rst_deassert - IFX_REG_W32(reg, IFX_RCU_RST_REQ); +@@ -79,24 +62,6 @@ static inline void pcie_ahb_pmu_setup(vo + //AHBS_PMU_SETUP(IFX_PMU_ENABLE); + } + +-static inline void pcie_rcu_endian_setup(int pcie_port) +-{ +- u32 reg; +- +- reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); +-#ifdef CONFIG_IFX_PCIE_HW_SWAP +- reg |= IFX_RCU_AHB_BE_PCIE_M; +- reg |= IFX_RCU_AHB_BE_PCIE_S; +- reg &= ~IFX_RCU_AHB_BE_XBAR_M; +-#else +- reg |= IFX_RCU_AHB_BE_PCIE_M; +- reg &= ~IFX_RCU_AHB_BE_PCIE_S; +- reg &= ~IFX_RCU_AHB_BE_XBAR_M; +-#endif /* CONFIG_IFX_PCIE_HW_SWAP */ +- IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); +- IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); +-} +- + static inline void pcie_phy_pmu_enable(int pcie_port) + { + struct clk *clk; +@@ -115,17 +80,6 @@ static inline void pcie_phy_pmu_disable( + // PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE); + } + +-static inline void pcie_pdi_big_endian(int pcie_port) +-{ +- u32 reg; +- +- /* SRAM2PDI endianness control. */ +- reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); +- /* Config AHB->PCIe and PDI endianness */ +- reg |= IFX_RCU_AHB_BE_PCIE_PDI; +- IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); +-} +- + static inline void pcie_pdi_pmu_enable(int pcie_port) + { + /* Enable PDI to access PCIe PHY register */ +@@ -135,65 +89,6 @@ static inline void pcie_pdi_pmu_enable(i + //PDI_PMU_SETUP(IFX_PMU_ENABLE); } +-static inline void pcie_core_rst_assert(int pcie_port) +-{ +- u32 reg; +- +- reg = IFX_REG_R32(IFX_RCU_RST_REQ); +- +- /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */ +- reg |= 0x00400000; +- IFX_REG_W32(reg, IFX_RCU_RST_REQ); +-} +- +-static inline void pcie_core_rst_deassert(int pcie_port) +-{ +- u32 reg; +- +- /* Make sure one micro-second delay */ +- udelay(1); +- +- /* Reset PCIe PHY & Core, bit 22 */ +- reg = IFX_REG_R32(IFX_RCU_RST_REQ); +- reg &= ~0x00400000; +- IFX_REG_W32(reg, IFX_RCU_RST_REQ); +-} +- +-static inline void pcie_phy_rst_assert(int pcie_port) +-{ +- u32 reg; +- +- reg = IFX_REG_R32(IFX_RCU_RST_REQ); +- reg |= 0x00001000; /* Bit 12 */ +- IFX_REG_W32(reg, IFX_RCU_RST_REQ); +-} +- +-static inline void pcie_phy_rst_deassert(int pcie_port) +-{ +- u32 reg; +- +- /* Make sure one micro-second delay */ +- udelay(1); +- +- reg = IFX_REG_R32(IFX_RCU_RST_REQ); +- reg &= ~0x00001000; /* Bit 12 */ +- IFX_REG_W32(reg, IFX_RCU_RST_REQ); +-} +- -static inline void pcie_device_rst_assert(int pcie_port) -{ - gpio_set_value(IFX_PCIE_GPIO_RESET, 0); @@ -189,3 +374,14 @@ static inline void pcie_core_pmu_setup(int pcie_port) { struct clk *clk; +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -51,7 +51,7 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o + obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o + obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o + obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o +-obj-$(CONFIG_PCIE_LANTIQ) += ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o ++obj-$(CONFIG_PCIE_LANTIQ) += ifxmips_pcie.o fixup-lantiq-pcie.o + obj-$(CONFIG_PCIE_LANTIQ_MSI) += pcie-lantiq-msi.o + obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o + obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o diff --git a/target/linux/lantiq/patches-5.4/0152-lantiq-VPE.patch b/target/linux/lantiq/patches-5.4/0152-lantiq-VPE.patch index 9e39427c6a..f454055824 100644 --- a/target/linux/lantiq/patches-5.4/0152-lantiq-VPE.patch +++ b/target/linux/lantiq/patches-5.4/0152-lantiq-VPE.patch @@ -1,6 +1,6 @@ --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -2318,6 +2318,12 @@ config MIPS_VPE_LOADER +@@ -2375,6 +2375,12 @@ config MIPS_VPE_LOADER Includes a loader for loading an elf relocatable object onto another VPE and running it. @@ -142,7 +142,7 @@ { --- a/arch/mips/lantiq/prom.c +++ b/arch/mips/lantiq/prom.c -@@ -36,10 +36,14 @@ unsigned long physical_memsize = 0L; +@@ -34,10 +34,14 @@ unsigned long physical_memsize = 0L; */ static struct ltq_soc_info soc_info; @@ -169,7 +169,7 @@ #define read_c0_tcstatus() __read_32bit_c0_register($2, 1) #define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val) -@@ -377,6 +380,8 @@ do { \ +@@ -378,6 +381,8 @@ do { \ #define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val) #define read_vpe_c0_vpeconf1() mftc0(1, 3) #define write_vpe_c0_vpeconf1(val) mttc0(1, 3, val) diff --git a/target/linux/lantiq/patches-5.4/0154-lantiq-pci-bar11mask-fix.patch b/target/linux/lantiq/patches-5.4/0154-lantiq-pci-bar11mask-fix.patch index d0acd4bb10..d6556d115d 100644 --- a/target/linux/lantiq/patches-5.4/0154-lantiq-pci-bar11mask-fix.patch +++ b/target/linux/lantiq/patches-5.4/0154-lantiq-pci-bar11mask-fix.patch @@ -1,6 +1,6 @@ --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c -@@ -61,6 +61,8 @@ +@@ -59,6 +59,8 @@ #define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y)) #define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x)) @@ -9,7 +9,7 @@ __iomem void *ltq_pci_mapped_cfg; static __iomem void *ltq_pci_membase; -@@ -86,8 +88,8 @@ static inline u32 ltq_calc_bar11mask(voi +@@ -84,8 +86,8 @@ static inline u32 ltq_calc_bar11mask(voi u32 mem, bar11mask; /* BAR11MASK value depends on available memory on system. */ diff --git a/target/linux/lantiq/patches-5.4/0160-owrt-lantiq-multiple-flash.patch b/target/linux/lantiq/patches-5.4/0160-owrt-lantiq-multiple-flash.patch index 304ff4bac8..796220b2bc 100644 --- a/target/linux/lantiq/patches-5.4/0160-owrt-lantiq-multiple-flash.patch +++ b/target/linux/lantiq/patches-5.4/0160-owrt-lantiq-multiple-flash.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/maps/lantiq-flash.c +++ b/drivers/mtd/maps/lantiq-flash.c -@@ -19,6 +19,7 @@ +@@ -17,6 +17,7 @@ #include #include #include @@ -8,7 +8,7 @@ #include #include -@@ -38,13 +39,16 @@ enum { +@@ -36,13 +37,16 @@ enum { LTQ_NOR_NORMAL }; @@ -28,7 +28,7 @@ static map_word ltq_read16(struct map_info *map, unsigned long adr) -@@ -108,11 +112,43 @@ ltq_copy_to(struct map_info *map, unsign +@@ -106,11 +110,43 @@ ltq_copy_to(struct map_info *map, unsign } static int @@ -73,7 +73,7 @@ ltq_mtd = devm_kzalloc(&pdev->dev, sizeof(struct ltq_mtd), GFP_KERNEL); if (!ltq_mtd) -@@ -120,75 +156,89 @@ ltq_mtd_probe(struct platform_device *pd +@@ -118,75 +154,89 @@ ltq_mtd_probe(struct platform_device *pd platform_set_drvdata(pdev, ltq_mtd); diff --git a/target/linux/lantiq/patches-5.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch b/target/linux/lantiq/patches-5.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch index b98abe8b4b..1beef0e1fe 100644 --- a/target/linux/lantiq/patches-5.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch +++ b/target/linux/lantiq/patches-5.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch @@ -1,6 +1,6 @@ --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -424,6 +424,20 @@ static void clkdev_add_clkout(void) +@@ -422,6 +422,20 @@ static void clkdev_add_clkout(void) } } @@ -21,7 +21,7 @@ /* bring up all register ranges that we need for basic system control */ void __init ltq_soc_init(void) { -@@ -587,4 +601,6 @@ void __init ltq_soc_init(void) +@@ -585,4 +599,6 @@ void __init ltq_soc_init(void) clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); } usb_set_clock(); diff --git a/target/linux/lantiq/patches-5.4/0701-NET-lantiq-etop-of-mido.patch b/target/linux/lantiq/patches-5.4/0701-NET-lantiq-etop-of-mido.patch index 05e4ec8328..2cc541ae3c 100644 --- a/target/linux/lantiq/patches-5.4/0701-NET-lantiq-etop-of-mido.patch +++ b/target/linux/lantiq/patches-5.4/0701-NET-lantiq-etop-of-mido.patch @@ -1,6 +1,6 @@ --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c -@@ -40,6 +40,7 @@ +@@ -30,6 +30,7 @@ #include #include #include @@ -8,7 +8,7 @@ #include -@@ -571,7 +572,8 @@ static int +@@ -553,7 +554,8 @@ static int ltq_etop_mdio_init(struct net_device *dev) { struct ltq_etop_priv *priv = netdev_priv(dev); @@ -18,7 +18,7 @@ priv->mii_bus = mdiobus_alloc(); if (!priv->mii_bus) { -@@ -591,7 +593,15 @@ ltq_etop_mdio_init(struct net_device *de +@@ -573,7 +575,15 @@ ltq_etop_mdio_init(struct net_device *de priv->mii_bus->name = "ltq_mii"; snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", priv->pdev->name, priv->pdev->id); diff --git a/target/linux/lantiq/xrx200/config-5.4 b/target/linux/lantiq/xrx200/config-5.4 index 0c14f3dadc..cad6ebf1ae 100644 --- a/target/linux/lantiq/xrx200/config-5.4 +++ b/target/linux/lantiq/xrx200/config-5.4 @@ -10,12 +10,15 @@ CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_HASH_INFO=y CONFIG_CRYPTO_LZO=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_NULL2=y +CONFIG_CRYPTO_ZSTD=y CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin" CONFIG_EXTRA_FIRMWARE_DIR="firmware" +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HWMON=y CONFIG_ICPLUS_PHY=y CONFIG_IFX_VPE_EXT=y @@ -24,7 +27,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_POLLDEV=y CONFIG_INTEL_XWAY_PHY=y # CONFIG_ISDN is not set -CONFIG_LANTIQ_XRX200=y +CONFIG_LANTIQ_XRX200_LEGACY=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y @@ -38,11 +41,11 @@ CONFIG_MIPS_VPE_APSP_API_MT=y CONFIG_MIPS_VPE_LOADER=y CONFIG_MIPS_VPE_LOADER_MT=y CONFIG_MIPS_VPE_LOADER_TOM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_NAND_XWAY=y -# CONFIG_MTD_PHYSMAP_OF is not set +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_BLOCK=y @@ -59,8 +62,10 @@ CONFIG_PCIEPORTBUS=y CONFIG_PCIE_LANTIQ=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LANTIQ=y +CONFIG_PHY_LANTIQ_VRX200_PCIE=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_SUPPLY=y +CONFIG_POWER_SUPPLY_HWMON=y CONFIG_QUEUED_RWLOCKS=y CONFIG_QUEUED_SPINLOCKS=y CONFIG_RCU_NEED_SEGCBLIST=y @@ -87,11 +92,15 @@ CONFIG_UBIFS_FS=y CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UBIFS_FS_ZSTD=y CONFIG_USB=y CONFIG_USB_COMMON=y # CONFIG_USB_EHCI_HCD is not set CONFIG_USB_SUPPORT=y CONFIG_XPS=y CONFIG_XRX200_PHY_FW=y +CONFIG_XXHASH=y CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_INFLATE=y +CONFIG_ZSTD_COMPRESS=y +CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/lantiq/xway/config-5.4 b/target/linux/lantiq/xway/config-5.4 index 6075cec522..7c539ba2ca 100644 --- a/target/linux/lantiq/xway/config-5.4 +++ b/target/linux/lantiq/xway/config-5.4 @@ -5,7 +5,10 @@ CONFIG_BLK_MQ_PCI=y CONFIG_CRC16=y CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_HASH_INFO=y CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_ZSTD=y +CONFIG_GENERIC_ALLOCATOR=y CONFIG_INPUT=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_POLLDEV=y @@ -13,11 +16,10 @@ CONFIG_INPUT_POLLDEV=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y CONFIG_MTD_NAND_XWAY=y -# CONFIG_MTD_PHYSMAP_OF is not set +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_BLOCK=y @@ -35,13 +37,18 @@ CONFIG_RTL8306_PHY=y CONFIG_RTL8366S_PHY=y CONFIG_RTL8367B_PHY=y CONFIG_RTL8367_PHY=y +CONFIG_SGL_ALLOC=y CONFIG_UBIFS_FS=y CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UBIFS_FS_ZSTD=y CONFIG_USB=y CONFIG_USB_COMMON=y # CONFIG_USB_EHCI_HCD is not set CONFIG_USB_SUPPORT=y +CONFIG_XXHASH=y CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_INFLATE=y +CONFIG_ZSTD_COMPRESS=y +CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/lantiq/xway_legacy/config-5.4 b/target/linux/lantiq/xway_legacy/config-5.4 index c4042f147f..63452a7487 100644 --- a/target/linux/lantiq/xway_legacy/config-5.4 +++ b/target/linux/lantiq/xway_legacy/config-5.4 @@ -5,6 +5,7 @@ CONFIG_CRC16=y CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y +CONFIG_GENERIC_ALLOCATOR=y # CONFIG_GPIO_SYSFS is not set # CONFIG_HW_RANDOM is not set CONFIG_INPUT=y @@ -15,7 +16,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y -# CONFIG_MTD_PHYSMAP_OF is not set CONFIG_NLS=y CONFIG_PCI=y # CONFIG_PCIE_LANTIQ is not set @@ -27,6 +27,7 @@ CONFIG_RTL8306_PHY=y CONFIG_RTL8366S_PHY=y CONFIG_RTL8367B_PHY=y CONFIG_RTL8367_PHY=y +CONFIG_SGL_ALLOC=y CONFIG_USB=y CONFIG_USB_COMMON=y # CONFIG_USB_EHCI_HCD is not set -- 2.25.1