From 6bbf5e1a9480004139f543c4717bf95f22b1b5b3 Mon Sep 17 00:00:00 2001 From: Kever Yang Date: Fri, 9 Nov 2018 11:18:15 +0800 Subject: [PATCH] rockchip: rk3399: add tpl support Rockchip platform suppose to use TPL(run in SRAM) as dram init and SPL(run in DDR SDRAM) as pre-loader, so that the SPL would not be limited by SRAM size. This patch add rk3399-board-tpl.c and its common configs. Signed-off-by: Kever Yang --- arch/arm/mach-rockchip/Kconfig | 34 ++++++++- arch/arm/mach-rockchip/Makefile | 1 + arch/arm/mach-rockchip/rk3399-board-tpl.c | 84 +++++++++++++++++++++++ include/configs/rk3399_common.h | 8 +++ 4 files changed, 126 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-rockchip/rk3399-board-tpl.c diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 48e364e127..f5c3329750 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -154,12 +154,28 @@ config ROCKCHIP_RK3399 bool "Support Rockchip RK3399" select ARM64 select SUPPORT_SPL + select SUPPORT_TPL select SPL + select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL + select TPL_NEEDS_SEPARATE_STACK if TPL select SPL_SEPARATE_BSS select SPL_SERIAL_SUPPORT select SPL_DRIVERS_MISC_SUPPORT select BOARD_LATE_INIT select ROCKCHIP_BROM_HELPER + imply TPL_SERIAL_SUPPORT + imply TPL_LIBCOMMON_SUPPORT + imply TPL_LIBGENERIC_SUPPORT + imply TPL_SYS_MALLOC_SIMPLE + imply TPL_BOOTROM_SUPPORT + imply TPL_DRIVERS_MISC_SUPPORT + imply TPL_OF_CONTROL + imply TPL_DM + imply TPL_REGMAP + imply TPL_SYSCON + imply TPL_RAM + imply TPL_CLK + imply TPL_TINY_MEMSET help The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72 and quad-core Cortex-A53. @@ -168,6 +184,22 @@ config ROCKCHIP_RK3399 and video codec support. Peripherals include Gigabit Ethernet, USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. +if ROCKCHIP_RK3399 + +config TPL_LDSCRIPT + default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" + +config TPL_TEXT_BASE + default 0xff8c2000 + +config TPL_MAX_SIZE + default 188416 + +config TPL_STACK + default 0xff8effff + +endif + config ROCKCHIP_RV1108 bool "Support Rockchip RV1108" select CPU_V7A @@ -195,7 +227,7 @@ config SPL_ROCKCHIP_BACK_TO_BROM config TPL_ROCKCHIP_BACK_TO_BROM bool "TPL returns to bootrom" - default y if ROCKCHIP_RK3368 + default y select ROCKCHIP_BROM_HELPER depends on TPL help diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index fd62a693fe..846c82d70a 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -12,6 +12,7 @@ obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o obj-tpl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-tpl.o obj-tpl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-tpl.o obj-tpl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-tpl.o +obj-tpl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-tpl.o obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o obj-spl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o diff --git a/arch/arm/mach-rockchip/rk3399-board-tpl.c b/arch/arm/mach-rockchip/rk3399-board-tpl.c new file mode 100644 index 0000000000..86d3ffe97c --- /dev/null +++ b/arch/arm/mach-rockchip/rk3399-board-tpl.c @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include +#include +#include + +#define TIMER_CHN10_BASE 0xff8680a0 +#define TIMER_END_COUNT_L 0x00 +#define TIMER_END_COUNT_H 0x04 +#define TIMER_INIT_COUNT_L 0x10 +#define TIMER_INIT_COUNT_H 0x14 +#define TIMER_CONTROL_REG 0x1c + +#define TIMER_EN 0x1 +#define TIMER_FMODE (0 << 1) +#define TIMER_RMODE (1 << 1) + +void secure_timer_init(void) +{ + writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_L); + writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_H); + writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_L); + writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_H); + writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG); +} + +void board_init_f(ulong dummy) +{ + struct udevice *dev; + int ret; + +#ifdef CONFIG_DEBUG_UART + debug_uart_init(); + /* + * Debug UART can be used from here if required: + * + * debug_uart_init(); + * printch('a'); + * printhex8(0x1234); + * printascii("string"); + */ + printascii("U-Boot TPL board init\n"); +#endif + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } + + secure_timer_init(); + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + pr_err("DRAM init failed: %d\n", ret); + return; + } +} + +void board_return_to_bootrom(void) +{ + back_to_bootrom(BROM_BOOT_NEXTSTAGE); +} + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_BOOTROM; +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + /* Just empty function now - can't decide what to choose */ + debug("%s: %s\n", __func__, name); + + return 0; +} +#endif diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index e7ae2c4640..f31f2658bb 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -18,11 +18,19 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x00300000 #define CONFIG_SYS_LOAD_ADDR 0x00800800 + +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT) +#define CONFIG_SPL_STACK 0x00400000 +#define CONFIG_SPL_MAX_SIZE 0x100000 +#define CONFIG_SPL_BSS_START_ADDR 0x00400000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 +#else #define CONFIG_SPL_STACK 0xff8effff #define CONFIG_SPL_MAX_SIZE 0x30000 - 0x2000 /* BSS setup */ #define CONFIG_SPL_BSS_START_ADDR 0xff8e0000 #define CONFIG_SPL_BSS_MAX_SIZE 0x10000 +#endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ -- 2.25.1