From 6b59e03e0237a40a2305ea385defdfd92000978b Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 1 Sep 2008 16:21:22 +0200 Subject: [PATCH] lcd: Let the board code show board-specific info The information displayed when CONFIG_LCD_INFO is set is inherently board-specific, so it should be done by the board code. The current code dealing with this only handles two cases, and is already a horrible mess of #ifdeffery. Yes, this duplicates some code, but it also allows boards to print more board-specific information; this used to be very difficult. Signed-off-by: Haavard Skinnemoen Signed-off-by: Anatolij Gustschin --- board/atmel/at91cap9adk/at91cap9adk.c | 29 ++++++++ board/atmel/at91sam9261ek/at91sam9261ek.c | 29 ++++++++ board/atmel/at91sam9263ek/at91sam9263ek.c | 29 ++++++++ board/atmel/at91sam9rlek/at91sam9rlek.c | 29 ++++++++ board/lwmon/lwmon.c | 29 ++++++++ board/tqc/tqm8xx/tqm8xx.c | 26 +++++++ common/lcd.c | 84 ++--------------------- include/lcd.h | 2 + 8 files changed, 178 insertions(+), 79 deletions(-) diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index 544c932f26..a1a9238f6e 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -326,6 +326,35 @@ static void at91cap9_lcd_hw_init(void) gd->fb_base = 0; } + +#ifdef CONFIG_LCD_INFO +#include +#include + +void lcd_show_board_info(void) +{ + ulong dram_size, nand_size; + int i; + char temp[32]; + + lcd_printf ("%s\n", U_BOOT_VERSION); + lcd_printf ("(C) 2008 ATMEL Corp\n"); + lcd_printf ("at91support@atmel.com\n"); + lcd_printf ("%s CPU at %s MHz\n", + AT91_CPU_NAME, + strmhz(temp, AT91_MAIN_CLOCK)); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + nand_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + nand_size += nand_info[i].size; + lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", + dram_size >> 20, + nand_size >> 20 ); +} +#endif /* CONFIG_LCD_INFO */ #endif int board_init(void) diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index 76f56d6ae7..70f1db93f6 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -209,6 +209,35 @@ static void at91sam9261ek_lcd_hw_init(void) gd->fb_base = AT91SAM9261_SRAM_BASE; } + +#ifdef CONFIG_LCD_INFO +#include +#include + +void lcd_show_board_info(void) +{ + ulong dram_size, nand_size; + int i; + char temp[32]; + + lcd_printf ("%s\n", U_BOOT_VERSION); + lcd_printf ("(C) 2008 ATMEL Corp\n"); + lcd_printf ("at91support@atmel.com\n"); + lcd_printf ("%s CPU at %s MHz\n", + AT91_CPU_NAME, + strmhz(temp, AT91_MAIN_CLOCK)); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + nand_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + nand_size += nand_info[i].size; + lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", + dram_size >> 20, + nand_size >> 20 ); +} +#endif /* CONFIG_LCD_INFO */ #endif int board_init(void) diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index dd513b9e12..63f95e718f 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -260,6 +260,35 @@ static void at91sam9263ek_lcd_hw_init(void) gd->fb_base = AT91SAM9263_SRAM0_BASE; } + +#ifdef CONFIG_LCD_INFO +#include +#include + +void lcd_show_board_info(void) +{ + ulong dram_size, nand_size; + int i; + char temp[32]; + + lcd_printf ("%s\n", U_BOOT_VERSION); + lcd_printf ("(C) 2008 ATMEL Corp\n"); + lcd_printf ("at91support@atmel.com\n"); + lcd_printf ("%s CPU at %s MHz\n", + AT91_CPU_NAME, + strmhz(temp, AT91_MAIN_CLOCK)); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + nand_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + nand_size += nand_info[i].size; + lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", + dram_size >> 20, + nand_size >> 20 ); +} +#endif /* CONFIG_LCD_INFO */ #endif int board_init(void) diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index 7bf1f439b2..37e371ff2d 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -181,6 +181,35 @@ static void at91sam9rlek_lcd_hw_init(void) gd->fb_base = 0; } + +#ifdef CONFIG_LCD_INFO +#include +#include + +void lcd_show_board_info(void) +{ + ulong dram_size, nand_size; + int i; + char temp[32]; + + lcd_printf ("%s\n", U_BOOT_VERSION); + lcd_printf ("(C) 2008 ATMEL Corp\n"); + lcd_printf ("at91support@atmel.com\n"); + lcd_printf ("%s CPU at %s MHz\n", + AT91_CPU_NAME, + strmhz(temp, AT91_MAIN_CLOCK)); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + nand_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + nand_size += nand_info[i].size; + lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", + dram_size >> 20, + nand_size >> 20 ); +} +#endif /* CONFIG_LCD_INFO */ #endif diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c index aadd2540e8..9e572463d3 100644 --- a/board/lwmon/lwmon.c +++ b/board/lwmon/lwmon.c @@ -759,6 +759,35 @@ static uchar *key_match (uchar *kbd_data) } #endif /* CONFIG_PREBOOT */ +#ifdef CONFIG_LCD_INFO +#include +#include + +void lcd_show_board_info(void) +{ + char temp[32]; + + lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, __DATE__, __TIME__); + lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n"); + lcd_printf (" Wolfgang DENK, wd@denx.de\n"); +#ifdef CONFIG_LCD_INFO_BELOW_LOGO + lcd_printf ("MPC823 CPU at %s MHz\n", + strmhz(temp, gd->cpu_clk)); + lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3, + info, strlen(info)); + lcd_printf (" %ld MB RAM, %ld MB Flash\n", + gd->ram_size >> 20, + gd->bd->bi_flashsize >> 20 ); +#else + /* leave one blank line */ + lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n", + strmhz(temp, gd->cpu_clk), + gd->ram_size >> 20, + gd->bd->bi_flashsize >> 20 ); +#endif /* CONFIG_LCD_INFO_BELOW_LOGO */ +} +#endif /* CONFIG_LCD_INFO */ + /*---------------Board Special Commands: PIC read/write ---------------*/ #if defined(CONFIG_CMD_BSP) diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c index 9a0f3a0ff2..928afed661 100644 --- a/board/tqc/tqm8xx/tqm8xx.c +++ b/board/tqc/tqm8xx/tqm8xx.c @@ -568,6 +568,32 @@ void ide_led (uchar led, uchar status) } # endif +#ifdef CONFIG_LCD_INFO +#include + +void lcd_show_board_info(void) +{ + lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, __DATE__, __TIME__); + lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n"); + lcd_printf (" Wolfgang DENK, wd@denx.de\n"); +#ifdef CONFIG_LCD_INFO_BELOW_LOGO + lcd_printf ("MPC823 CPU at %s MHz\n", + strmhz(temp, gd->cpu_clk)); + lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3, + info, strlen(info)); + lcd_printf (" %ld MB RAM, %ld MB Flash\n", + gd->ram_size >> 20, + gd->bd->bi_flashsize >> 20 ); +#else + /* leave one blank line */ + lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n", + strmhz(temp, gd->cpu_clk), + gd->ram_size >> 20, + gd->bd->bi_flashsize >> 20 ); +#endif /* CONFIG_LCD_INFO_BELOW_LOGO */ +} +#endif /* CONFIG_LCD_INFO */ + /* ---------------------------------------------------------------------------- */ /* TK885D specific initializaion */ /* ---------------------------------------------------------------------------- */ diff --git a/common/lcd.c b/common/lcd.c index 813c8d827d..31bb190ddd 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -52,7 +52,6 @@ #if defined(CONFIG_ATMEL_LCD) #include -#include #endif /************************************************************************/ @@ -762,15 +761,6 @@ extern bmp_image_t *gunzip_bmp(unsigned long addr, unsigned long *lenp); static void *lcd_logo (void) { -#ifdef CONFIG_LCD_INFO - char info[80]; - char temp[32]; -#ifdef CONFIG_ATMEL_LCD - int i; - ulong dram_size, nand_size; -#endif -#endif /* CONFIG_LCD_INFO */ - #ifdef CONFIG_SPLASH_SCREEN char *s; ulong addr; @@ -800,75 +790,11 @@ static void *lcd_logo (void) bitmap_plot (0, 0); #endif /* CONFIG_LCD_LOGO */ -#ifdef CONFIG_MPC823 -# ifdef CONFIG_LCD_INFO - sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info)); - - sprintf (info, "(C) 2008 DENX Software Engineering GmbH"); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT, - (uchar *)info, strlen(info)); - - sprintf (info, " Wolfgang DENK, wd@denx.de"); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2, - (uchar *)info, strlen(info)); -# ifdef CONFIG_LCD_INFO_BELOW_LOGO - sprintf (info, "MPC823 CPU at %s MHz", - strmhz(temp, gd->cpu_clk)); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3, - info, strlen(info)); - sprintf (info, " %ld MB RAM, %ld MB Flash", - gd->ram_size >> 20, - gd->bd->bi_flashsize >> 20 ); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4, - info, strlen(info)); -# else - /* leave one blank line */ - - sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash", - strmhz(temp, gd->cpu_clk), - gd->ram_size >> 20, - gd->bd->bi_flashsize >> 20 ); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4, - (uchar *)info, strlen(info)); - -# endif /* CONFIG_LCD_INFO_BELOW_LOGO */ -# endif /* CONFIG_LCD_INFO */ -#endif /* CONFIG_MPC823 */ - -#ifdef CONFIG_ATMEL_LCD -# ifdef CONFIG_LCD_INFO - sprintf (info, "%s", U_BOOT_VERSION); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info)); - - sprintf (info, "(C) 2008 ATMEL Corp"); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT, - (uchar *)info, strlen(info)); - - sprintf (info, "at91support@atmel.com"); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2, - (uchar *)info, strlen(info)); - - sprintf (info, "%s CPU at %s MHz", - AT91_CPU_NAME, - strmhz(temp, AT91_MAIN_CLOCK)); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3, - (uchar *)info, strlen(info)); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - nand_size = 0; - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += nand_info[i].size; - sprintf (info, " %ld MB SDRAM, %ld MB NAND", - dram_size >> 20, - nand_size >> 20 ); - lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4, - (uchar *)info, strlen(info)); -# endif /* CONFIG_LCD_INFO */ -#endif /* CONFIG_ATMEL_LCD */ - +#ifdef CONFIG_LCD_INFO + console_col = LCD_INFO_X / VIDEO_FONT_WIDTH; + console_row = LCD_INFO_Y / VIDEO_FONT_HEIGHT; + lcd_show_board_info(); +#endif /* CONFIG_LCD_INFO */ #if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO) return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length)); diff --git a/include/lcd.h b/include/lcd.h index 15affb85cb..512221e9c4 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -197,6 +197,8 @@ void lcd_putc (const char c); void lcd_puts (const char *s); void lcd_printf (const char *fmt, ...); +/* Allow boards to customize the information displayed */ +void lcd_show_board_info(void); /************************************************************************/ /* ** BITMAP DISPLAY SUPPORT */ -- 2.25.1