From 6b3984c6318447e954942c9780b714a676f977e6 Mon Sep 17 00:00:00 2001 From: Johannes Krottmayer Date: Wed, 3 Jun 2020 11:50:06 +0200 Subject: [PATCH] doc: board: xilinx: zynq.rst: add description how to flash a SD card Add a short description in the ZYNQ documentation how to prepare a SD card and copy the related images to SD card. Signed-off-by: Johannes Krottmayer Cc: Michal Simek Signed-off-by: Michal Simek --- doc/board/xilinx/zynq.rst | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/doc/board/xilinx/zynq.rst b/doc/board/xilinx/zynq.rst index 6a09df1d15..f564434b69 100644 --- a/doc/board/xilinx/zynq.rst +++ b/doc/board/xilinx/zynq.rst @@ -60,6 +60,25 @@ SLCR bootmode register Bit[3:0] values "modeboot" variable can assign any of "norboot", "sdboot" or "jtagboot" bootmode strings at runtime. +Flashing +-------- + +SD Card +^^^^^^^ + +To write an image that boots from a SD card first create a FAT32 partition +and a FAT32 filesystem on the SD card:: + + sudo fdisk /dev/sdx + sudo mkfs.vfat -F 32 /dev/sdx1 + +Mount the SD card and copy the SPL and U-Boot to the root directory of the +SD card:: + + sudo mount -t vfat /dev/sdx1 /mnt + sudo cp spl/boot.bin /mnt + sudo cp u-boot.img /mnt + Mainline status --------------- -- 2.25.1