From 66a00be2878dc0f972a6e100e91af5942ef8f736 Mon Sep 17 00:00:00 2001 From: Mans Rullgard Date: Mon, 7 May 2018 11:10:47 +0100 Subject: [PATCH] ARM: orion5x: fix use of callee-saved registers in lowloevel_init The lowlevel_init function uses r4 and r6 without preserving their values as required by the AAPCS. Use r0 and r2 instead as these are call-clobbered. Signed-off-by: Mans Rullgard Reviewed-by: Chris Packham --- arch/arm/mach-orion5x/lowlevel_init.S | 168 +++++++++++++------------- 1 file changed, 84 insertions(+), 84 deletions(-) diff --git a/arch/arm/mach-orion5x/lowlevel_init.S b/arch/arm/mach-orion5x/lowlevel_init.S index f5c382bd4e..aa3fcf7c30 100644 --- a/arch/arm/mach-orion5x/lowlevel_init.S +++ b/arch/arm/mach-orion5x/lowlevel_init.S @@ -71,67 +71,67 @@ lowlevel_init: #ifdef CONFIG_SPL_BUILD - /* Use 'r4 as the base for internal register accesses */ - ldr r4, =ORION5X_REGS_PHY_BASE + /* Use 'r2 as the base for internal register accesses */ + ldr r2, =ORION5X_REGS_PHY_BASE /* move internal registers from the default 0xD0000000 * to their intended location, defined by SoC */ ldr r3, =0xD0000000 add r3, r3, #0x20000 - str r4, [r3, #0x80] + str r2, [r3, #0x80] /* Use R3 as the base for DRAM registers */ - add r3, r4, #0x01000 + add r3, r2, #0x01000 /*DDR SDRAM Initialization Control */ - ldr r6, =0x00000001 - str r6, [r3, #0x480] + ldr r0, =0x00000001 + str r0, [r3, #0x480] /* Use R3 as the base for PCI registers */ - add r3, r4, #0x31000 + add r3, r2, #0x31000 /* Disable arbiter */ - ldr r6, =0x00000030 - str r6, [r3, #0xd00] + ldr r0, =0x00000030 + str r0, [r3, #0xd00] /* Use R3 as the base for DRAM registers */ - add r3, r4, #0x01000 + add r3, r2, #0x01000 /* set all dram windows to 0 */ - mov r6, #0 - str r6, [r3, #0x504] - str r6, [r3, #0x50C] - str r6, [r3, #0x514] - str r6, [r3, #0x51C] + mov r0, #0 + str r0, [r3, #0x504] + str r0, [r3, #0x50C] + str r0, [r3, #0x514] + str r0, [r3, #0x51C] /* 1) Configure SDRAM */ - ldr r6, =SDRAM_CONFIG - str r6, [r3, #0x400] + ldr r0, =SDRAM_CONFIG + str r0, [r3, #0x400] /* 2) Set SDRAM Control reg */ - ldr r6, =SDRAM_CONTROL - str r6, [r3, #0x404] + ldr r0, =SDRAM_CONTROL + str r0, [r3, #0x404] /* 3) Write SDRAM address control register */ - ldr r6, =SDRAM_ADDR_CTRL - str r6, [r3, #0x410] + ldr r0, =SDRAM_ADDR_CTRL + str r0, [r3, #0x410] /* 4) Write SDRAM bank 0 size register */ - ldr r6, =SDRAM_BANK0_SIZE - str r6, [r3, #0x504] + ldr r0, =SDRAM_BANK0_SIZE + str r0, [r3, #0x504] /* keep other banks disabled */ /* 5) Write SDRAM open pages control register */ - ldr r6, =SDRAM_OPEN_PAGE_EN - str r6, [r3, #0x414] + ldr r0, =SDRAM_OPEN_PAGE_EN + str r0, [r3, #0x414] /* 6) Write SDRAM timing Low register */ - ldr r6, =SDRAM_TIME_CTRL_LOW - str r6, [r3, #0x408] + ldr r0, =SDRAM_TIME_CTRL_LOW + str r0, [r3, #0x408] /* 7) Write SDRAM timing High register */ - ldr r6, =SDRAM_TIME_CTRL_HI - str r6, [r3, #0x40C] + ldr r0, =SDRAM_TIME_CTRL_HI + str r0, [r3, #0x40C] /* 8) Write SDRAM mode register */ /* The CPU must not attempt to change the SDRAM Mode register setting */ @@ -142,73 +142,73 @@ lowlevel_init: /* and then sets SDRAM Mode register to its new value. */ /* 8.1 write 'nop' to SDRAM operation */ - ldr r6, =SDRAM_OP_NOP - str r6, [r3, #0x418] + ldr r0, =SDRAM_OP_NOP + str r0, [r3, #0x418] /* 8.2 poll SDRAM operation until back in 'normal' mode. */ 1: - ldr r6, [r3, #0x418] - cmp r6, #0 + ldr r0, [r3, #0x418] + cmp r0, #0 bne 1b /* 8.3 Now its safe to write new value to SDRAM Mode register */ - ldr r6, =SDRAM_MODE - str r6, [r3, #0x41C] + ldr r0, =SDRAM_MODE + str r0, [r3, #0x41C] /* 8.4 Set new mode */ - ldr r6, =SDRAM_OP_SETMODE - str r6, [r3, #0x418] + ldr r0, =SDRAM_OP_SETMODE + str r0, [r3, #0x418] /* 8.5 poll SDRAM operation until back in 'normal' mode. */ 2: - ldr r6, [r3, #0x418] - cmp r6, #0 + ldr r0, [r3, #0x418] + cmp r0, #0 bne 2b /* DDR SDRAM Address/Control Pads Calibration */ - ldr r6, [r3, #0x4C0] + ldr r0, [r3, #0x4C0] /* Set Bit [31] to make the register writable */ - orr r6, r6, #SDRAM_PAD_CTRL_WR_EN - str r6, [r3, #0x4C0] + orr r0, r0, #SDRAM_PAD_CTRL_WR_EN + str r0, [r3, #0x4C0] - bic r6, r6, #SDRAM_PAD_CTRL_WR_EN - bic r6, r6, #SDRAM_PAD_CTRL_TUNE_EN - bic r6, r6, #SDRAM_PAD_CTRL_DRVN_MASK - bic r6, r6, #SDRAM_PAD_CTRL_DRVP_MASK + bic r0, r0, #SDRAM_PAD_CTRL_WR_EN + bic r0, r0, #SDRAM_PAD_CTRL_TUNE_EN + bic r0, r0, #SDRAM_PAD_CTRL_DRVN_MASK + bic r0, r0, #SDRAM_PAD_CTRL_DRVP_MASK /* Get the final N locked value of driving strength [22:17] */ - mov r1, r6 + mov r1, r0 mov r1, r1, LSL #9 mov r1, r1, LSR #26 /* r1[5:0] = r3[22:17] */ orr r1, r1, r1, LSL #6 /* r1[11:6] = r1[5:0] */ /* Write to both bits [5:0] and bits [11:6] */ - orr r6, r6, r1 - str r6, [r3, #0x4C0] + orr r0, r0, r1 + str r0, [r3, #0x4C0] /* DDR SDRAM Data Pads Calibration */ - ldr r6, [r3, #0x4C4] + ldr r0, [r3, #0x4C4] /* Set Bit [31] to make the register writable */ - orr r6, r6, #SDRAM_PAD_CTRL_WR_EN - str r6, [r3, #0x4C4] + orr r0, r0, #SDRAM_PAD_CTRL_WR_EN + str r0, [r3, #0x4C4] - bic r6, r6, #SDRAM_PAD_CTRL_WR_EN - bic r6, r6, #SDRAM_PAD_CTRL_TUNE_EN - bic r6, r6, #SDRAM_PAD_CTRL_DRVN_MASK - bic r6, r6, #SDRAM_PAD_CTRL_DRVP_MASK + bic r0, r0, #SDRAM_PAD_CTRL_WR_EN + bic r0, r0, #SDRAM_PAD_CTRL_TUNE_EN + bic r0, r0, #SDRAM_PAD_CTRL_DRVN_MASK + bic r0, r0, #SDRAM_PAD_CTRL_DRVP_MASK /* Get the final N locked value of driving strength [22:17] */ - mov r1, r6 + mov r1, r0 mov r1, r1, LSL #9 mov r1, r1, LSR #26 orr r1, r1, r1, LSL #6 /* r1[5:0] = r3[22:17] */ /* Write to both bits [5:0] and bits [11:6] */ - orr r6, r6, r1 + orr r0, r0, r1 - str r6, [r3, #0x4C4] + str r0, [r3, #0x4C4] /* Implement Guideline (GL# MEM-3) Drive Strength Value */ /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */ @@ -216,37 +216,37 @@ lowlevel_init: ldr r1, =DDR1_PAD_STRENGTH_DEFAULT /* Enable writes to DDR SDRAM Addr/Ctrl Pads Calibration register */ - ldr r6, [r3, #0x4C0] - orr r6, r6, #SDRAM_PAD_CTRL_WR_EN - str r6, [r3, #0x4C0] + ldr r0, [r3, #0x4C0] + orr r0, r0, #SDRAM_PAD_CTRL_WR_EN + str r0, [r3, #0x4C0] /* Correct strength and disable writes again */ - bic r6, r6, #SDRAM_PAD_CTRL_WR_EN - bic r6, r6, #SDRAM_PAD_CTRL_DRV_STR_MASK - orr r6, r6, r1 - str r6, [r3, #0x4C0] + bic r0, r0, #SDRAM_PAD_CTRL_WR_EN + bic r0, r0, #SDRAM_PAD_CTRL_DRV_STR_MASK + orr r0, r0, r1 + str r0, [r3, #0x4C0] /* Enable writes to DDR SDRAM Data Pads Calibration register */ - ldr r6, [r3, #0x4C4] - orr r6, r6, #SDRAM_PAD_CTRL_WR_EN - str r6, [r3, #0x4C4] + ldr r0, [r3, #0x4C4] + orr r0, r0, #SDRAM_PAD_CTRL_WR_EN + str r0, [r3, #0x4C4] /* Correct strength and disable writes again */ - bic r6, r6, #SDRAM_PAD_CTRL_DRV_STR_MASK - bic r6, r6, #SDRAM_PAD_CTRL_WR_EN - orr r6, r6, r1 - str r6, [r3, #0x4C4] + bic r0, r0, #SDRAM_PAD_CTRL_DRV_STR_MASK + bic r0, r0, #SDRAM_PAD_CTRL_WR_EN + orr r0, r0, r1 + str r0, [r3, #0x4C4] /* Implement Guideline (GL# MEM-4) DQS Reference Delay Tuning */ /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */ /* Get the "sample on reset" register for the DDR frequancy */ ldr r3, =0x10000 - ldr r6, [r3, #0x010] + ldr r0, [r3, #0x010] ldr r1, =MSAR_ARMDDRCLCK_MASK - and r1, r6, r1 + and r1, r0, r1 - ldr r6, =FTDLL_DDR1_166MHZ + ldr r0, =FTDLL_DDR1_166MHZ cmp r1, #MSAR_ARMDDRCLCK_333_167 beq 3f cmp r1, #MSAR_ARMDDRCLCK_500_167 @@ -254,7 +254,7 @@ lowlevel_init: cmp r1, #MSAR_ARMDDRCLCK_667_167 beq 3f - ldr r6, =FTDLL_DDR1_200MHZ + ldr r0, =FTDLL_DDR1_200MHZ cmp r1, #MSAR_ARMDDRCLCK_400_200_1 beq 3f cmp r1, #MSAR_ARMDDRCLCK_400_200 @@ -264,21 +264,21 @@ lowlevel_init: cmp r1, #MSAR_ARMDDRCLCK_800_200 beq 3f - ldr r6, =0 + ldr r0, =0 3: /* Use R3 as the base for DRAM registers */ - add r3, r4, #0x01000 + add r3, r2, #0x01000 ldr r2, [r3, #0x484] - orr r2, r2, r6 + orr r2, r2, r0 str r2, [r3, #0x484] /* enable for 2 GB DDR; detection should find out real amount */ - sub r6, r6, r6 - str r6, [r3, #0x500] - ldr r6, =0x7fff0001 - str r6, [r3, #0x504] + sub r0, r0, r0 + str r0, [r3, #0x500] + ldr r0, =0x7fff0001 + str r0, [r3, #0x504] #endif /* CONFIG_SPL_BUILD */ -- 2.25.1