From 655f17ff7d8631ca9344a4bff5918243e5bfed37 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 10 May 2020 14:16:55 -0600 Subject: [PATCH] bdinfo: Export some basic printing functions At present the functions to print a number and a frequency are static. We want to move some of the code in here to an arch-specific file. For consistency that code should use these same functions. So export them with an appropriate name. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- cmd/bdinfo.c | 78 +++++++++++++++++++++++++------------------------- include/init.h | 6 ++++ 2 files changed, 45 insertions(+), 39 deletions(-) diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index a11f388413..4fadfd2ac7 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -17,7 +17,7 @@ DECLARE_GLOBAL_DATA_PTR; -static void print_num(const char *name, ulong value) +void bdinfo_print_num(const char *name, ulong value) { printf("%-12s= 0x%0*lx\n", name, 2 * (int)sizeof(value), value); } @@ -40,7 +40,7 @@ static void print_lnum(const char *name, unsigned long long value) printf("%-12s= 0x%.8llX\n", name, value); } -static void print_mhz(const char *name, unsigned long hz) +void bdinfo_print_mhz(const char *name, unsigned long hz) { char buf[32]; @@ -54,9 +54,9 @@ static void print_bi_dram(const bd_t *bd) for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { if (bd->bi_dram[i].size) { - print_num("DRAM bank", i); - print_num("-> start", bd->bi_dram[i].start); - print_num("-> size", bd->bi_dram[i].size); + bdinfo_print_num("DRAM bank", i); + bdinfo_print_num("-> start", bd->bi_dram[i].start); + bdinfo_print_num("-> size", bd->bi_dram[i].size); } } #endif @@ -72,50 +72,50 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) bd_t *bd = gd->bd; #ifdef DEBUG - print_num("bd address", (ulong)bd); + bdinfo_print_num("bd address", (ulong)bd); #endif if (IS_ENABLED(CONFIG_ARM)) - print_num("arch_number", bd->bi_arch_number); - print_num("boot_params", (ulong)bd->bi_boot_params); + bdinfo_print_num("arch_number", bd->bi_arch_number); + bdinfo_print_num("boot_params", (ulong)bd->bi_boot_params); print_bi_dram(bd); - print_num("memstart", (ulong)bd->bi_memstart); + bdinfo_print_num("memstart", (ulong)bd->bi_memstart); print_lnum("memsize", (u64)bd->bi_memsize); - print_num("flashstart", (ulong)bd->bi_flashstart); - print_num("flashsize", (ulong)bd->bi_flashsize); - print_num("flashoffset", (ulong)bd->bi_flashoffset); + bdinfo_print_num("flashstart", (ulong)bd->bi_flashstart); + bdinfo_print_num("flashsize", (ulong)bd->bi_flashsize); + bdinfo_print_num("flashoffset", (ulong)bd->bi_flashoffset); printf("baudrate = %u bps\n", gd->baudrate); - print_num("relocaddr", gd->relocaddr); - print_num("reloc off", gd->reloc_off); + bdinfo_print_num("relocaddr", gd->relocaddr); + bdinfo_print_num("reloc off", gd->reloc_off); printf("%-12s= %u-bit\n", "Build", (uint)sizeof(void *) * 8); if (IS_ENABLED(CONFIG_CMD_NET)) { printf("current eth = %s\n", eth_get_name()); print_eth(0); printf("IP addr = %s\n", env_get("ipaddr")); } - print_num("fdt_blob", (ulong)gd->fdt_blob); - print_num("new_fdt", (ulong)gd->new_fdt); - print_num("fdt_size", (ulong)gd->fdt_size); + bdinfo_print_num("fdt_blob", (ulong)gd->fdt_blob); + bdinfo_print_num("new_fdt", (ulong)gd->new_fdt); + bdinfo_print_num("fdt_size", (ulong)gd->fdt_size); #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO) - print_num("FB base ", gd->fb_base); + bdinfo_print_num("FB base ", gd->fb_base); #endif /* This section is used only by ARM */ #ifdef CONFIG_ARM #ifdef CONFIG_SYS_MEM_RESERVE_SECURE if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) { - print_num("Secure ram", + bdinfo_print_num("Secure ram", gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK); } #endif #ifdef CONFIG_RESV_RAM if (gd->arch.resv_ram) - print_num("Reserved ram", gd->arch.resv_ram); + bdinfo_print_num("Reserved ram", gd->arch.resv_ram); #endif #if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) - print_num("TLB addr", gd->arch.tlb_addr); + bdinfo_print_num("TLB addr", gd->arch.tlb_addr); #endif - print_num("irq_sp", gd->irq_sp); /* irq stack pointer */ - print_num("sp start ", gd->start_addr_sp); + bdinfo_print_num("irq_sp", gd->irq_sp); /* irq stack pointer */ + bdinfo_print_num("sp start ", gd->start_addr_sp); /* * TODO: Currently only support for davinci SOC's is added. * Remove this check once all the board implement this. @@ -133,17 +133,17 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) CONFIG_VAL(SYS_MALLOC_F_LEN)); #endif #if CONFIG_IS_ENABLED(MULTI_DTB_FIT) - print_num("multi_dtb_fit", (ulong)gd->multi_dtb_fit); + bdinfo_print_num("multi_dtb_fit", (ulong)gd->multi_dtb_fit); #endif #endif /* CONFIG_ARM */ /* This section is used only by ppc */ #if defined(CONFIG_MPC8xx) || defined(CONFIG_E500) - print_num("immr_base", bd->bi_immr_base); + bdinfo_print_num("immr_base", bd->bi_immr_base); #endif if (IS_ENABLED(CONFIG_PPC)) { - print_num("bootflags", bd->bi_bootflags); - print_mhz("intfreq", bd->bi_intfreq); + bdinfo_print_num("bootflags", bd->bi_bootflags); + bdinfo_print_mhz("intfreq", bd->bi_intfreq); #ifdef CONFIG_ENABLE_36BIT_PHYS if (IS_ENABLED(CONFIG_PHYS_64BIT)) puts("addressing = 36-bit\n"); @@ -153,32 +153,32 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) board_detail(); } #if defined(CONFIG_CPM2) - print_mhz("cpmfreq", bd->bi_cpmfreq); - print_mhz("vco", bd->bi_vco); - print_mhz("sccfreq", bd->bi_sccfreq); - print_mhz("brgfreq", bd->bi_brgfreq); + bdinfo_print_mhz("cpmfreq", bd->bi_cpmfreq); + bdinfo_print_mhz("vco", bd->bi_vco); + bdinfo_print_mhz("sccfreq", bd->bi_sccfreq); + bdinfo_print_mhz("brgfreq", bd->bi_brgfreq); #endif /* This is used by m68k and ppc */ #if defined(CONFIG_SYS_INIT_RAM_ADDR) - print_num("sramstart", (ulong)bd->bi_sramstart); - print_num("sramsize", (ulong)bd->bi_sramsize); + bdinfo_print_num("sramstart", (ulong)bd->bi_sramstart); + bdinfo_print_num("sramsize", (ulong)bd->bi_sramsize); #endif if (IS_ENABLED(CONFIG_PPC) || IS_ENABLED(CONFIG_M68K)) - print_mhz("busfreq", bd->bi_busfreq); + bdinfo_print_mhz("busfreq", bd->bi_busfreq); /* The rest are used only by m68k */ #ifdef CONFIG_M68K #if defined(CONFIG_SYS_MBAR) print_num("mbar", bd->bi_mbar_base); #endif - print_mhz("cpufreq", bd->bi_intfreq); + bdinfo_print_mhz("cpufreq", bd->bi_intfreq); if (IS_ENABLED(CONFIG_PCI)) - print_mhz("pcifreq", bd->bi_pcifreq); + bdinfo_print_mhz("pcifreq", bd->bi_pcifreq); #ifdef CONFIG_EXTRA_CLOCK - print_mhz("flbfreq", bd->bi_flbfreq); - print_mhz("inpfreq", bd->bi_inpfreq); - print_mhz("vcofreq", bd->bi_vcofreq); + bdinfo_print_mhz("flbfreq", bd->bi_flbfreq); + bdinfo_print_mhz("inpfreq", bd->bi_inpfreq); + bdinfo_print_mhz("vcofreq", bd->bi_vcofreq); #endif #endif diff --git a/include/init.h b/include/init.h index b5a167b6ed..af4deed566 100644 --- a/include/init.h +++ b/include/init.h @@ -261,6 +261,12 @@ void relocate_code(ulong start_addr_sp, struct global_data *new_gd, __attribute__ ((noreturn)); #endif +/* Print a numeric value (for use in arch_print_bdinfo()) */ +void bdinfo_print_num(const char *name, ulong value); + +/* Print a clock speed in MHz */ +void bdinfo_print_mhz(const char *name, unsigned long hz); + #endif /* __ASSEMBLY__ */ /* Put only stuff here that the assembler can digest */ -- 2.25.1