From 62d7fe7c91d9da43c8164c7baa9b2331a18d9ee0 Mon Sep 17 00:00:00 2001 From: Chandan Nath Date: Fri, 14 Oct 2011 02:58:24 +0000 Subject: [PATCH] ARM:AM33XX: Add emif/ddr support This patch adds AM33xx emif/ddr support along with board specific defines. Signed-off-by: Chandan Nath Signed-off-by: Sandeep Paulraj --- arch/arm/cpu/armv7/am33xx/Makefile | 3 + arch/arm/cpu/armv7/am33xx/ddr.c | 147 +++++++++++ arch/arm/cpu/armv7/am33xx/emif4.c | 201 ++++++++++++++ arch/arm/include/asm/arch-am33xx/ddr_defs.h | 264 +++++++++++++++++++ arch/arm/include/asm/arch-am33xx/sys_proto.h | 39 +++ 5 files changed, 654 insertions(+) create mode 100644 arch/arm/cpu/armv7/am33xx/ddr.c create mode 100644 arch/arm/cpu/armv7/am33xx/emif4.c create mode 100644 arch/arm/include/asm/arch-am33xx/ddr_defs.h create mode 100644 arch/arm/include/asm/arch-am33xx/sys_proto.h diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index fc25587fa3..7ed667877b 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -20,6 +20,9 @@ SOBJS := lowlevel_init.o COBJS += clock.o COBJS += sys_info.o +COBJS += ddr.o +COBJS += emif4.o + SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c new file mode 100644 index 0000000000..ed982c11e8 --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/ddr.c @@ -0,0 +1,147 @@ +/* + * DDR Configuration for AM33xx devices. + * + * Copyright (C) 2011 Texas Instruments Incorporated - +http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +/** + * Base address for EMIF instances + */ +static struct emif_regs *emif_reg = { + (struct emif_regs *)EMIF4_0_CFG_BASE}; + +/** + * Base address for DDR instance + */ +static struct ddr_regs *ddr_reg[2] = { + (struct ddr_regs *)DDR_PHY_BASE_ADDR, + (struct ddr_regs *)DDR_PHY_BASE_ADDR2}; + +/** + * Base address for ddr io control instances + */ +static struct ddr_cmdtctrl *ioctrl_reg = { + (struct ddr_cmdtctrl *)DDR_CONTROL_BASE_ADDR}; + +/** + * As a convention, all functions here return 0 on success + * -1 on failure. + */ + +/** + * Configure SDRAM + */ +int config_sdram(struct sdram_config *cfg) +{ + writel(cfg->sdrcr, &emif_reg->sdrcr); + writel(cfg->sdrcr2, &emif_reg->sdrcr2); + writel(cfg->refresh, &emif_reg->sdrrcr); + writel(cfg->refresh_sh, &emif_reg->sdrrcsr); + + return 0; +} + +/** + * Set SDRAM timings + */ +int set_sdram_timings(struct sdram_timing *t) +{ + writel(t->time1, &emif_reg->sdrtim1); + writel(t->time1_sh, &emif_reg->sdrtim1sr); + writel(t->time2, &emif_reg->sdrtim2); + writel(t->time2_sh, &emif_reg->sdrtim2sr); + writel(t->time3, &emif_reg->sdrtim3); + writel(t->time3_sh, &emif_reg->sdrtim3sr); + + return 0; +} + +/** + * Configure DDR PHY + */ +int config_ddr_phy(struct ddr_phy_control *p) +{ + writel(p->reg, &emif_reg->ddrphycr); + writel(p->reg_sh, &emif_reg->ddrphycsr); + + return 0; +} + +/** + * Configure DDR CMD control registers + */ +int config_cmd_ctrl(struct cmd_control *cmd) +{ + writel(cmd->cmd0csratio, &ddr_reg[0]->cm0csratio); + writel(cmd->cmd0csforce, &ddr_reg[0]->cm0csforce); + writel(cmd->cmd0csdelay, &ddr_reg[0]->cm0csdelay); + writel(cmd->cmd0dldiff, &ddr_reg[0]->cm0dldiff); + writel(cmd->cmd0iclkout, &ddr_reg[0]->cm0iclkout); + + writel(cmd->cmd1csratio, &ddr_reg[0]->cm1csratio); + writel(cmd->cmd1csforce, &ddr_reg[0]->cm1csforce); + writel(cmd->cmd1csdelay, &ddr_reg[0]->cm1csdelay); + writel(cmd->cmd1dldiff, &ddr_reg[0]->cm1dldiff); + writel(cmd->cmd1iclkout, &ddr_reg[0]->cm1iclkout); + + writel(cmd->cmd2csratio, &ddr_reg[0]->cm2csratio); + writel(cmd->cmd2csforce, &ddr_reg[0]->cm2csforce); + writel(cmd->cmd2csdelay, &ddr_reg[0]->cm2csdelay); + writel(cmd->cmd2dldiff, &ddr_reg[0]->cm2dldiff); + writel(cmd->cmd2iclkout, &ddr_reg[0]->cm2iclkout); + + return 0; +} + +/** + * Configure DDR DATA registers + */ +int config_ddr_data(int macrono, struct ddr_data *data) +{ + writel(data->datardsratio0, &ddr_reg[macrono]->dt0rdsratio0); + writel(data->datardsratio1, &ddr_reg[macrono]->dt0rdsratio1); + + writel(data->datawdsratio0, &ddr_reg[macrono]->dt0wdsratio0); + writel(data->datawdsratio1, &ddr_reg[macrono]->dt0wdsratio1); + + writel(data->datawiratio0, &ddr_reg[macrono]->dt0wiratio0); + writel(data->datawiratio1, &ddr_reg[macrono]->dt0wiratio1); + writel(data->datagiratio0, &ddr_reg[macrono]->dt0giratio0); + writel(data->datagiratio1, &ddr_reg[macrono]->dt0giratio1); + + writel(data->datafwsratio0, &ddr_reg[macrono]->dt0fwsratio0); + writel(data->datafwsratio1, &ddr_reg[macrono]->dt0fwsratio1); + + writel(data->datawrsratio0, &ddr_reg[macrono]->dt0wrsratio0); + writel(data->datawrsratio1, &ddr_reg[macrono]->dt0wrsratio1); + + writel(data->datadldiff0, &ddr_reg[macrono]->dt0dldiff0); + + return 0; +} + +int config_io_ctrl(struct ddr_ioctrl *ioctrl) +{ + writel(ioctrl->cmd1ctl, &ioctrl_reg->cm0ioctl); + writel(ioctrl->cmd2ctl, &ioctrl_reg->cm1ioctl); + writel(ioctrl->cmd3ctl, &ioctrl_reg->cm2ioctl); + writel(ioctrl->data1ctl, &ioctrl_reg->dt0ioctl); + writel(ioctrl->data2ctl, &ioctrl_reg->dt1ioctl); + + return 0; +} diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c new file mode 100644 index 0000000000..1318365a4a --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -0,0 +1,201 @@ +/* + * emif4.c + * + * AM33XX emif4 configuration file + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +struct ddr_regs *ddrregs = (struct ddr_regs *)DDR_PHY_BASE_ADDR; +struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR; +struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; + + +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size( + (void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_MAX_RAM_BANK_SIZE); + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = gd->ram_size; +} + + +#ifdef CONFIG_AM335X_CONFIG_DDR +static void data_macro_config(int dataMacroNum) +{ + struct ddr_data data; + + data.datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20) + |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)); + data.datardsratio1 = DDR2_RD_DQS>>2; + data.datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20) + |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)); + data.datawdsratio1 = DDR2_WR_DQS>>2; + data.datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20) + |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)); + data.datawiratio1 = DDR2_PHY_WRLVL>>2; + data.datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20) + |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)); + data.datagiratio1 = DDR2_PHY_GATELVL>>2; + data.datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20) + |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)); + data.datafwsratio1 = DDR2_PHY_FIFO_WE>>2; + data.datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20) + |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)); + data.datawrsratio1 = DDR2_PHY_WR_DATA>>2; + data.datadldiff0 = PHY_DLL_LOCK_DIFF; + + config_ddr_data(dataMacroNum, &data); +} + +static void cmd_macro_config(void) +{ + struct cmd_control cmd; + + cmd.cmd0csratio = DDR2_RATIO; + cmd.cmd0csforce = CMD_FORCE; + cmd.cmd0csdelay = CMD_DELAY; + cmd.cmd0dldiff = DDR2_DLL_LOCK_DIFF; + cmd.cmd0iclkout = DDR2_INVERT_CLKOUT; + + cmd.cmd1csratio = DDR2_RATIO; + cmd.cmd1csforce = CMD_FORCE; + cmd.cmd1csdelay = CMD_DELAY; + cmd.cmd1dldiff = DDR2_DLL_LOCK_DIFF; + cmd.cmd1iclkout = DDR2_INVERT_CLKOUT; + + cmd.cmd2csratio = DDR2_RATIO; + cmd.cmd2csforce = CMD_FORCE; + cmd.cmd2csdelay = CMD_DELAY; + cmd.cmd2dldiff = DDR2_DLL_LOCK_DIFF; + cmd.cmd2iclkout = DDR2_INVERT_CLKOUT; + + config_cmd_ctrl(&cmd); + +} + +static void config_vtp(void) +{ + writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_ENABLE, + &vtpreg->vtp0ctrlreg); + writel(readl(&vtpreg->vtp0ctrlreg) & (~VTP_CTRL_START_EN), + &vtpreg->vtp0ctrlreg); + writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_START_EN, + &vtpreg->vtp0ctrlreg); + + /* Poll for READY */ + while ((readl(&vtpreg->vtp0ctrlreg) & VTP_CTRL_READY) != + VTP_CTRL_READY) + ; +} + +static void config_emif_ddr2(void) +{ + int i; + int ret; + struct sdram_config cfg; + struct sdram_timing tmg; + struct ddr_phy_control phyc; + + /*Program EMIF0 CFG Registers*/ + phyc.reg = EMIF_READ_LATENCY; + phyc.reg_sh = EMIF_READ_LATENCY; + phyc.reg2 = EMIF_READ_LATENCY; + + tmg.time1 = EMIF_TIM1; + tmg.time1_sh = EMIF_TIM1; + tmg.time2 = EMIF_TIM2; + tmg.time2_sh = EMIF_TIM2; + tmg.time3 = EMIF_TIM3; + tmg.time3_sh = EMIF_TIM3; + + cfg.sdrcr = EMIF_SDCFG; + cfg.sdrcr2 = EMIF_SDCFG; + cfg.refresh = 0x00004650; + cfg.refresh_sh = 0x00004650; + + /* Program EMIF instance */ + ret = config_ddr_phy(&phyc); + if (ret < 0) + printf("Couldn't configure phyc\n"); + + ret = config_sdram(&cfg); + if (ret < 0) + printf("Couldn't configure SDRAM\n"); + + ret = set_sdram_timings(&tmg); + if (ret < 0) + printf("Couldn't configure timings\n"); + + /* Delay */ + for (i = 0; i < 5000; i++) + ; + + cfg.refresh = EMIF_SDREF; + cfg.refresh_sh = EMIF_SDREF; + cfg.sdrcr = EMIF_SDCFG; + cfg.sdrcr2 = EMIF_SDCFG; + + ret = config_sdram(&cfg); + if (ret < 0) + printf("Couldn't configure SDRAM\n"); +} + +void config_ddr(void) +{ + int data_macro_0 = 0; + int data_macro_1 = 1; + struct ddr_ioctrl ioctrl; + + enable_emif_clocks(); + + config_vtp(); + + cmd_macro_config(); + + data_macro_config(data_macro_0); + data_macro_config(data_macro_1); + + writel(PHY_RANK0_DELAY, &ddrregs->dt0rdelays0); + writel(PHY_RANK0_DELAY, &ddrregs->dt1rdelays0); + + ioctrl.cmd1ctl = DDR_IOCTRL_VALUE; + ioctrl.cmd2ctl = DDR_IOCTRL_VALUE; + ioctrl.cmd3ctl = DDR_IOCTRL_VALUE; + ioctrl.data1ctl = DDR_IOCTRL_VALUE; + ioctrl.data2ctl = DDR_IOCTRL_VALUE; + + config_io_ctrl(&ioctrl); + + writel(readl(&ddrctrl->ddrioctrl) & 0xefffffff, &ddrctrl->ddrioctrl); + writel(readl(&ddrctrl->ddrckectrl) | 0x00000001, &ddrctrl->ddrckectrl); + + config_emif_ddr2(); +} +#endif diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h new file mode 100644 index 0000000000..9638b4caa3 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -0,0 +1,264 @@ +/* + * ddr_defs.h + * + * ddr specific header + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DDR_DEFS_H +#define _DDR_DEFS_H + +#include + +/* AM335X EMIF Register values */ +#define EMIF_SDMGT 0x80000000 +#define EMIF_SDRAM 0x00004650 +#define EMIF_PHYCFG 0x2 +#define DDR_PHY_RESET (0x1 << 10) +#define DDR_FUNCTIONAL_MODE_EN 0x1 +#define DDR_PHY_READY (0x1 << 2) +#define VTP_CTRL_READY (0x1 << 5) +#define VTP_CTRL_ENABLE (0x1 << 6) +#define VTP_CTRL_LOCK_EN (0x1 << 4) +#define VTP_CTRL_START_EN (0x1) +#define DDR2_RATIO 0x80 +#define CMD_FORCE 0x00 +#define CMD_DELAY 0x00 + +#define EMIF_READ_LATENCY 0x04 +#define EMIF_TIM1 0x0666B3D6 +#define EMIF_TIM2 0x143731DA +#define EMIF_TIM3 0x00000347 +#define EMIF_SDCFG 0x43805332 +#define EMIF_SDREF 0x0000081a +#define DDR2_DLL_LOCK_DIFF 0x0 +#define DDR2_RD_DQS 0x12 +#define DDR2_PHY_FIFO_WE 0x80 + +#define DDR2_INVERT_CLKOUT 0x00 +#define DDR2_WR_DQS 0x00 +#define DDR2_PHY_WRLVL 0x00 +#define DDR2_PHY_GATELVL 0x00 +#define DDR2_PHY_WR_DATA 0x40 +#define PHY_RANK0_DELAY 0x01 +#define PHY_DLL_LOCK_DIFF 0x0 +#define DDR_IOCTRL_VALUE 0x18B + +/** + * This structure represents the EMIF registers on AM33XX devices. + */ +struct emif_regs { + unsigned int sdrrev; /* offset 0x00 */ + unsigned int sdrstat; /* offset 0x04 */ + unsigned int sdrcr; /* offset 0x08 */ + unsigned int sdrcr2; /* offset 0x0C */ + unsigned int sdrrcr; /* offset 0x10 */ + unsigned int sdrrcsr; /* offset 0x14 */ + unsigned int sdrtim1; /* offset 0x18 */ + unsigned int sdrtim1sr; /* offset 0x1C */ + unsigned int sdrtim2; /* offset 0x20 */ + unsigned int sdrtim2sr; /* offset 0x24 */ + unsigned int sdrtim3; /* offset 0x28 */ + unsigned int sdrtim3sr; /* offset 0x2C */ + unsigned int res1[2]; + unsigned int sdrmcr; /* offset 0x38 */ + unsigned int sdrmcsr; /* offset 0x3C */ + unsigned int res2[8]; + unsigned int sdritr; /* offset 0x60 */ + unsigned int res3[20]; + unsigned int ddrphycr; /* offset 0xE4 */ + unsigned int ddrphycsr; /* offset 0xE8 */ + unsigned int ddrphycr2; /* offset 0xEC */ +}; + +/** + * Encapsulates DDR PHY control and corresponding shadow registers. + */ +struct ddr_phy_control { + unsigned long reg; + unsigned long reg_sh; + unsigned long reg2; +}; + +/** + * Encapsulates SDRAM timing and corresponding shadow registers. + */ +struct sdram_timing { + unsigned long time1; + unsigned long time1_sh; + unsigned long time2; + unsigned long time2_sh; + unsigned long time3; + unsigned long time3_sh; +}; + +/** + * Encapsulates SDRAM configuration. + * (Includes refresh control registers) */ +struct sdram_config { + unsigned long sdrcr; + unsigned long sdrcr2; + unsigned long refresh; + unsigned long refresh_sh; +}; + +/** + * Configure SDRAM + */ +int config_sdram(struct sdram_config *cfg); + +/** + * Set SDRAM timings + */ +int set_sdram_timings(struct sdram_timing *val); + +/** + * Configure DDR PHY + */ +int config_ddr_phy(struct ddr_phy_control *cfg); + +/** + * This structure represents the DDR registers on AM33XX devices. + */ +struct ddr_regs { + unsigned int resv0[7]; + unsigned int cm0csratio; /* offset 0x01C */ + unsigned int cm0csforce; /* offset 0x020 */ + unsigned int cm0csdelay; /* offset 0x024 */ + unsigned int cm0dldiff; /* offset 0x028 */ + unsigned int cm0iclkout; /* offset 0x02C */ + unsigned int resv1[8]; + unsigned int cm1csratio; /* offset 0x050 */ + unsigned int cm1csforce; /* offset 0x054 */ + unsigned int cm1csdelay; /* offset 0x058 */ + unsigned int cm1dldiff; /* offset 0x05C */ + unsigned int cm1iclkout; /* offset 0x060 */ + unsigned int resv2[8]; + unsigned int cm2csratio; /* offset 0x084 */ + unsigned int cm2csforce; /* offset 0x088 */ + unsigned int cm2csdelay; /* offset 0x08C */ + unsigned int cm2dldiff; /* offset 0x090 */ + unsigned int cm2iclkout; /* offset 0x094 */ + unsigned int resv3[12]; + unsigned int dt0rdsratio0; /* offset 0x0C8 */ + unsigned int dt0rdsratio1; /* offset 0x0CC */ + unsigned int resv4[3]; + unsigned int dt0wdsratio0; /* offset 0x0DC */ + unsigned int dt0wdsratio1; /* offset 0x0E0 */ + unsigned int resv5[3]; + unsigned int dt0wiratio0; /* offset 0x0F0 */ + unsigned int dt0wiratio1; /* offset 0x0F4 */ + unsigned int dt0giratio0; /* offset 0x0FC */ + unsigned int dt0giratio1; /* offset 0x100 */ + unsigned int resv6[2]; + unsigned int dt0fwsratio0; /* offset 0x108 */ + unsigned int dt0fwsratio1; /* offset 0x10C */ + unsigned int resv7[5]; + unsigned int dt0wrsratio0; /* offset 0x120 */ + unsigned int dt0wrsratio1; /* offset 0x124 */ + unsigned int resv8[3]; + unsigned int dt0rdelays0; /* offset 0x134 */ + unsigned int dt0dldiff0; /* offset 0x138 */ + unsigned int resv9[39]; + unsigned int dt1rdelays0; /* offset 0x1D8 */ +}; + +/** + * Encapsulates DDR CMD control registers. + */ +struct cmd_control { + unsigned long cmd0csratio; + unsigned long cmd0csforce; + unsigned long cmd0csdelay; + unsigned long cmd0dldiff; + unsigned long cmd0iclkout; + unsigned long cmd1csratio; + unsigned long cmd1csforce; + unsigned long cmd1csdelay; + unsigned long cmd1dldiff; + unsigned long cmd1iclkout; + unsigned long cmd2csratio; + unsigned long cmd2csforce; + unsigned long cmd2csdelay; + unsigned long cmd2dldiff; + unsigned long cmd2iclkout; +}; + +/** + * Encapsulates DDR DATA registers. + */ +struct ddr_data { + unsigned long datardsratio0; + unsigned long datardsratio1; + unsigned long datawdsratio0; + unsigned long datawdsratio1; + unsigned long datawiratio0; + unsigned long datawiratio1; + unsigned long datagiratio0; + unsigned long datagiratio1; + unsigned long datafwsratio0; + unsigned long datafwsratio1; + unsigned long datawrsratio0; + unsigned long datawrsratio1; + unsigned long datadldiff0; +}; + +/** + * Configure DDR CMD control registers + */ +int config_cmd_ctrl(struct cmd_control *cmd); + +/** + * Configure DDR DATA registers + */ +int config_ddr_data(int data_macrono, struct ddr_data *data); + +/** + * This structure represents the DDR io control on AM33XX devices. + */ +struct ddr_cmdtctrl { + unsigned int resv1[1]; + unsigned int cm0ioctl; + unsigned int cm1ioctl; + unsigned int cm2ioctl; + unsigned int resv2[12]; + unsigned int dt0ioctl; + unsigned int dt1ioctl; +}; + +/** + * Encapsulates DDR CMD & DATA io control registers. + */ +struct ddr_ioctrl { + unsigned long cmd1ctl; + unsigned long cmd2ctl; + unsigned long cmd3ctl; + unsigned long data1ctl; + unsigned long data2ctl; +}; + +/** + * Configure DDR io control registers + */ +int config_io_ctrl(struct ddr_ioctrl *ioctrl); + +struct ddr_ctrl { + unsigned int ddrioctrl; + unsigned int resv1[325]; + unsigned int ddrckectrl; +}; + +void config_ddr(void); + +#endif /* _DDR_DEFS_H */ diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h new file mode 100644 index 0000000000..1e265c689f --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -0,0 +1,39 @@ +/* + * sys_proto.h + * + * System information header + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +#define BOARD_REV_ID 0x0 +struct { + u32 board_type_v1; + u32 board_type_v2; + u32 mtype; + char *board_string; + char *nand_string; +} board_sysinfo; + +u32 get_cpu_rev(void); +u32 get_sysboot_value(void); + +#ifdef CONFIG_DISPLAY_CPUINFO +int print_cpuinfo(void); +#endif + +u32 get_device_type(void); +#endif -- 2.25.1