From 618a85356cebe18c8933147fe913a5fe17260332 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 10 Jun 2016 09:46:13 -0300 Subject: [PATCH] mx7dsabresd: Fix the boot of a NXP kernel Booting a NXP kernel with mainline U-boot leads to the following kernel crash: caam: probe of 30900000.caam failed with error -11 Unable to handle kernel NULL pointer dereference at virtual address 00000004 pgd = 80004000 [00000004] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM This happens because NXP kernel expects MX7 to boot in secure mode, so introduce mx7dsabresd_secure_defconfig that selects CONFIG_MX7_SEC and allows booting a NXP provided kernel successfully. Signed-off-by: Fabio Estevam --- configs/mx7dsabresd_secure_defconfig | 38 ++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 configs/mx7dsabresd_secure_defconfig diff --git a/configs/mx7dsabresd_secure_defconfig b/configs/mx7dsabresd_secure_defconfig new file mode 100644 index 0000000000..9e490043e1 --- /dev/null +++ b/configs/mx7dsabresd_secure_defconfig @@ -0,0 +1,38 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX7=y +CONFIG_TARGET_MX7DSABRESD=y +CONFIG_IMX_RDC=y +CONFIG_IMX_BOOTAUX=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg" +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_BOOTD is not set +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_MMC=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_DFU=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_USB=y +CONFIG_USB_GADGET=y +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="FSL" +CONFIG_G_DNL_VENDOR_NUM=0x0525 +CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 +CONFIG_OF_LIBFDT=y +CONFIG_MX7_SEC=y -- 2.25.1