From 6102560891d09db79196654aa414afc5acfa7911 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Date: Wed, 4 Mar 2015 19:05:25 +0530 Subject: [PATCH] Exynos5: Fix rpll_sdiv to support both peach-pit and peach-pi panels The existing setting for rpll_sdiv generates 70.5Mhz RPLL video clock to drive 1366x768 panel on peach_pit. This clock rate is not sufficient to drive 1920x1080 panel on peach-pi. So, we adjust rpll_sdiv to 3 so that it generates 141Mhz pixel clock which can drive peach-pi LCD. This change doesn't break peach-pit LCD since 141/2=70.5Mhz, i.e FIMD divider at IP level will get set to 1(the required divider setting will be calculated and set by exynos_fimd_set_clock()) and hence peach-pit LCD still works fine. Signed-off-by: Ajay Kumar Reviewed-by: Simon Glass Tested-by: Simon Glass Signed-off-by: Minkyu Kang --- arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c index 0aff3d0d0c..0200fd154f 100644 --- a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c +++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c @@ -179,10 +179,10 @@ struct mem_timings mem_timings[] = { .spll_mdiv = 0xc8, .spll_pdiv = 0x3, .spll_sdiv = 0x2, - /* RPLL @70.5Mhz */ + /* RPLL @141Mhz */ .rpll_mdiv = 0x5E, .rpll_pdiv = 0x2, - .rpll_sdiv = 0x4, + .rpll_sdiv = 0x3, .direct_cmd_msr = { 0x00020018, 0x00030000, 0x00010046, 0x00000d70, -- 2.25.1