From 60b49761e9d2f0d16ac5cef934504bc895ac3913 Mon Sep 17 00:00:00 2001 From: Wills Wang Date: Wed, 16 Mar 2016 16:59:57 +0800 Subject: [PATCH] drivers: serial: add serial driver for ar933x SOC This patch add support for ar933x serial. Signed-off-by: Wills Wang Reviewed-by: Thomas Chou Reviewed-by: Daniel Schwierzeck Reviewed-by: Simon Glass --- .../serial/qca,ar9330-uart.txt | 24 ++ drivers/serial/Kconfig | 18 ++ drivers/serial/Makefile | 1 + drivers/serial/serial_ar933x.c | 255 ++++++++++++++++++ 4 files changed, 298 insertions(+) create mode 100644 doc/device-tree-bindings/serial/qca,ar9330-uart.txt create mode 100644 drivers/serial/serial_ar933x.c diff --git a/doc/device-tree-bindings/serial/qca,ar9330-uart.txt b/doc/device-tree-bindings/serial/qca,ar9330-uart.txt new file mode 100644 index 0000000000..ec576a1ce9 --- /dev/null +++ b/doc/device-tree-bindings/serial/qca,ar9330-uart.txt @@ -0,0 +1,24 @@ +* Qualcomm Atheros AR9330 High-Speed UART + +Required properties: + +- compatible: Must be "qca,ar9330-uart" + +- reg: Specifies the physical base address of the controller and + the length of the memory mapped region. + +Additional requirements: + + Each UART port must have an alias correctly numbered in "aliases" + node. + +Example: + + aliases { + serial0 = &uart0; + }; + + uart0: uart@18020000 { + compatible = "qca,ar9330-uart"; + reg = <0x18020000 0x14>; + }; diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index a9a5d475dd..2497ae90a0 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -89,6 +89,15 @@ config DEBUG_UART_ALTERA_UART You will need to provide parameters to make this work. The driver will be available until the real driver model serial is running. +config DEBUG_UART_AR933X + bool "QCA/Atheros ar933x" + depends on AR933X_UART + help + Select this to enable a debug UART using the ar933x uart driver. + You will need to provide parameters to make this work. The + driver will be available until the real driver model serial is + running. + config DEBUG_UART_NS16550 bool "ns16550" help @@ -263,6 +272,15 @@ config ALTERA_UART Select this to enable an UART for Altera devices. Please find details on the "Embedded Peripherals IP User Guide" of Altera. +config AR933X_UART + bool "QCA/Atheros ar933x UART support" + depends on DM_SERIAL && SOC_AR933X + help + Select this to enable UART support for QCA/Atheros ar933x + devices. This driver uses driver model and requires a device + tree binding to operate, please refer to the document at + doc/device-tree-bindings/serial/qca,ar9330-uart.txt. + config FSL_LPUART bool "Freescale LPUART support" help diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index b0ac9d8a56..9def128e89 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -17,6 +17,7 @@ endif obj-$(CONFIG_ALTERA_UART) += altera_uart.o obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o +obj-$(CONFIG_AR933X_UART) += serial_ar933x.o obj-$(CONFIG_ARM_DCC) += arm_dcc.o obj-$(CONFIG_ATMEL_USART) += atmel_usart.o obj-$(CONFIG_EFI_APP) += serial_efi.o diff --git a/drivers/serial/serial_ar933x.c b/drivers/serial/serial_ar933x.c new file mode 100644 index 0000000000..d43f9c97d7 --- /dev/null +++ b/drivers/serial/serial_ar933x.c @@ -0,0 +1,255 @@ +/* + * Copyright (C) 2015-2016 Wills Wang + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define AR933X_UART_DATA_REG 0x00 +#define AR933X_UART_CS_REG 0x04 +#define AR933X_UART_CLK_REG 0x08 + +#define AR933X_UART_DATA_TX_RX_MASK 0xff +#define AR933X_UART_DATA_RX_CSR BIT(8) +#define AR933X_UART_DATA_TX_CSR BIT(9) +#define AR933X_UART_CS_IF_MODE_S 2 +#define AR933X_UART_CS_IF_MODE_M 0x3 +#define AR933X_UART_CS_IF_MODE_DTE 1 +#define AR933X_UART_CS_IF_MODE_DCE 2 +#define AR933X_UART_CS_TX_RDY_ORIDE BIT(7) +#define AR933X_UART_CS_RX_RDY_ORIDE BIT(8) +#define AR933X_UART_CLK_STEP_M 0xffff +#define AR933X_UART_CLK_SCALE_M 0xfff +#define AR933X_UART_CLK_SCALE_S 16 +#define AR933X_UART_CLK_STEP_S 0 + +struct ar933x_serial_priv { + void __iomem *regs; +}; + +/* + * baudrate = (clk / (scale + 1)) * (step * (1 / 2^17)) + */ +static u32 ar933x_serial_get_baud(u32 clk, u32 scale, u32 step) +{ + u64 t; + u32 div; + + div = (2 << 16) * (scale + 1); + t = clk; + t *= step; + t += (div / 2); + do_div(t, div); + + return t; +} + +static void ar933x_serial_get_scale_step(u32 clk, u32 baud, + u32 *scale, u32 *step) +{ + u32 tscale, baudrate; + long min_diff; + + *scale = 0; + *step = 0; + + min_diff = baud; + for (tscale = 0; tscale < AR933X_UART_CLK_SCALE_M; tscale++) { + u64 tstep; + int diff; + + tstep = baud * (tscale + 1); + tstep *= (2 << 16); + do_div(tstep, clk); + + if (tstep > AR933X_UART_CLK_STEP_M) + break; + + baudrate = ar933x_serial_get_baud(clk, tscale, tstep); + diff = abs(baudrate - baud); + if (diff < min_diff) { + min_diff = diff; + *scale = tscale; + *step = tstep; + } + } +} + +static int ar933x_serial_setbrg(struct udevice *dev, int baudrate) +{ + struct ar933x_serial_priv *priv = dev_get_priv(dev); + u32 val, scale, step; + + val = get_serial_clock(); + ar933x_serial_get_scale_step(val, baudrate, &scale, &step); + + val = (scale & AR933X_UART_CLK_SCALE_M) + << AR933X_UART_CLK_SCALE_S; + val |= (step & AR933X_UART_CLK_STEP_M) + << AR933X_UART_CLK_STEP_S; + writel(val, priv->regs + AR933X_UART_CLK_REG); + + return 0; +} + +static int ar933x_serial_putc(struct udevice *dev, const char c) +{ + struct ar933x_serial_priv *priv = dev_get_priv(dev); + u32 data; + + data = readl(priv->regs + AR933X_UART_DATA_REG); + if (!(data & AR933X_UART_DATA_TX_CSR)) + return -EAGAIN; + + data = (u32)c | AR933X_UART_DATA_TX_CSR; + writel(data, priv->regs + AR933X_UART_DATA_REG); + + return 0; +} + +static int ar933x_serial_getc(struct udevice *dev) +{ + struct ar933x_serial_priv *priv = dev_get_priv(dev); + u32 data; + + data = readl(priv->regs + AR933X_UART_DATA_REG); + if (!(data & AR933X_UART_DATA_RX_CSR)) + return -EAGAIN; + + writel(AR933X_UART_DATA_RX_CSR, priv->regs + AR933X_UART_DATA_REG); + return data & AR933X_UART_DATA_TX_RX_MASK; +} + +static int ar933x_serial_pending(struct udevice *dev, bool input) +{ + struct ar933x_serial_priv *priv = dev_get_priv(dev); + u32 data; + + data = readl(priv->regs + AR933X_UART_DATA_REG); + if (input) + return (data & AR933X_UART_DATA_RX_CSR) ? 1 : 0; + else + return (data & AR933X_UART_DATA_TX_CSR) ? 0 : 1; +} + +static int ar933x_serial_probe(struct udevice *dev) +{ + struct ar933x_serial_priv *priv = dev_get_priv(dev); + struct udevice *pinctrl; + fdt_addr_t addr; + u32 val; + int ret; + + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); + if (ret) + return ret; + ret = pinctrl_get_periph_id(pinctrl, dev); + if (ret < 0) + return ret; + ret = pinctrl_request(pinctrl, ret, 0); + if (ret < 0) + return ret; + + addr = dev_get_addr(dev); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + priv->regs = map_physmem(addr, + AR933X_UART_SIZE, + MAP_NOCACHE); + + /* + * UART controller configuration: + * - no DMA + * - no interrupt + * - DCE mode + * - no flow control + * - set RX ready oride + * - set TX ready oride + */ + val = (AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S) | + AR933X_UART_CS_TX_RDY_ORIDE | AR933X_UART_CS_RX_RDY_ORIDE; + writel(val, priv->regs + AR933X_UART_CS_REG); + return 0; +} + +static const struct dm_serial_ops ar933x_serial_ops = { + .putc = ar933x_serial_putc, + .pending = ar933x_serial_pending, + .getc = ar933x_serial_getc, + .setbrg = ar933x_serial_setbrg, +}; + +static const struct udevice_id ar933x_serial_ids[] = { + { .compatible = "qca,ar9330-uart" }, + { } +}; + +U_BOOT_DRIVER(serial_ar933x) = { + .name = "serial_ar933x", + .id = UCLASS_SERIAL, + .of_match = ar933x_serial_ids, + .priv_auto_alloc_size = sizeof(struct ar933x_serial_priv), + .probe = ar933x_serial_probe, + .ops = &ar933x_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; + +#ifdef CONFIG_DEBUG_UART_AR933X + +#include + +static inline void _debug_uart_init(void) +{ + void __iomem *regs = (void *)CONFIG_DEBUG_UART_BASE; + u32 val, scale, step; + + /* + * UART controller configuration: + * - no DMA + * - no interrupt + * - DCE mode + * - no flow control + * - set RX ready oride + * - set TX ready oride + */ + val = (AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S) | + AR933X_UART_CS_TX_RDY_ORIDE | AR933X_UART_CS_RX_RDY_ORIDE; + writel(val, regs + AR933X_UART_CS_REG); + + ar933x_serial_get_scale_step(CONFIG_DEBUG_UART_CLOCK, + CONFIG_BAUDRATE, &scale, &step); + + val = (scale & AR933X_UART_CLK_SCALE_M) + << AR933X_UART_CLK_SCALE_S; + val |= (step & AR933X_UART_CLK_STEP_M) + << AR933X_UART_CLK_STEP_S; + writel(val, regs + AR933X_UART_CLK_REG); +} + +static inline void _debug_uart_putc(int c) +{ + void __iomem *regs = (void *)CONFIG_DEBUG_UART_BASE; + u32 data; + + do { + data = readl(regs + AR933X_UART_DATA_REG); + } while (!(data & AR933X_UART_DATA_TX_CSR)); + + data = (u32)c | AR933X_UART_DATA_TX_CSR; + writel(data, regs + AR933X_UART_DATA_REG); +} + +DEBUG_UART_FUNCS + +#endif -- 2.25.1