From 604ab3ecda04b5bf0d6da989bf68bc98d38e7904 Mon Sep 17 00:00:00 2001 From: Frank Wang Date: Tue, 26 May 2020 11:34:32 +0800 Subject: [PATCH] driver: usb: drop legacy rockchip xhci driver We have changed to use dwc3 generic driver for usb3.0 host, so the legacy Rockchip's xHCI driver is not needed, and drop it. Signed-off-by: Frank Wang Reviewed-by: Jagan Teki Reviewed-by: Kever Yang --- drivers/usb/host/Kconfig | 9 -- drivers/usb/host/Makefile | 1 - drivers/usb/host/xhci-rockchip.c | 197 ------------------------------- 3 files changed, 207 deletions(-) delete mode 100644 drivers/usb/host/xhci-rockchip.c diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index f0a9ed226c..1c374a7bd8 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -53,15 +53,6 @@ config USB_XHCI_PCI help Enables support for the PCI-based xHCI controller. -config USB_XHCI_ROCKCHIP - bool "Support for Rockchip on-chip xHCI USB controller" - depends on ARCH_ROCKCHIP - depends on DM_REGULATOR - depends on DM_USB - default y - help - Enables support for the on-chip xHCI controller on Rockchip SoCs. - config USB_XHCI_RCAR bool "Renesas RCar USB 3.0 support" default y diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index e8e3b17e42..29d4f87e38 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -48,7 +48,6 @@ obj-$(CONFIG_USB_XHCI_BRCM) += xhci-brcm.o obj-$(CONFIG_USB_XHCI_HCD) += xhci.o xhci-mem.o xhci-ring.o obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o -obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o diff --git a/drivers/usb/host/xhci-rockchip.c b/drivers/usb/host/xhci-rockchip.c deleted file mode 100644 index 1c2bf04df3..0000000000 --- a/drivers/usb/host/xhci-rockchip.c +++ /dev/null @@ -1,197 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (c) 2016 Rockchip, Inc. - * Authors: Daniel Meng - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -struct rockchip_xhci_platdata { - fdt_addr_t hcd_base; - struct udevice *vbus_supply; -}; - -/* - * Contains pointers to register base addresses - * for the usb controller. - */ -struct rockchip_xhci { - struct usb_platdata usb_plat; - struct xhci_ctrl ctrl; - struct xhci_hccr *hcd; - struct dwc3 *dwc3_reg; -}; - -static int xhci_usb_ofdata_to_platdata(struct udevice *dev) -{ - struct rockchip_xhci_platdata *plat = dev_get_platdata(dev); - int ret = 0; - - /* - * Get the base address for XHCI controller from the device node - */ - plat->hcd_base = dev_read_addr(dev); - if (plat->hcd_base == FDT_ADDR_T_NONE) { - pr_err("Can't get the XHCI register base address\n"); - return -ENXIO; - } - - /* Vbus regulator */ - ret = device_get_supply_regulator(dev, "vbus-supply", - &plat->vbus_supply); - if (ret) - debug("Can't get VBus regulator!\n"); - - return 0; -} - -/* - * rockchip_dwc3_phy_setup() - Configure USB PHY Interface of DWC3 Core - * @dwc: Pointer to our controller context structure - * @dev: Pointer to ulcass device - */ -static void rockchip_dwc3_phy_setup(struct dwc3 *dwc3_reg, - struct udevice *dev) -{ - u32 reg; - u32 utmi_bits; - - /* Set dwc3 usb2 phy config */ - reg = readl(&dwc3_reg->g_usb2phycfg[0]); - - if (dev_read_bool(dev, "snps,dis-enblslpm-quirk")) - reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; - - utmi_bits = dev_read_u32_default(dev, "snps,phyif-utmi-bits", -1); - if (utmi_bits == 16) { - reg |= DWC3_GUSB2PHYCFG_PHYIF; - reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK; - reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT; - } else if (utmi_bits == 8) { - reg &= ~DWC3_GUSB2PHYCFG_PHYIF; - reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK; - reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT; - } - - if (dev_read_bool(dev, "snps,dis-u2-freeclk-exists-quirk")) - reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; - - if (dev_read_bool(dev, "snps,dis-u2-susphy-quirk")) - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - - writel(reg, &dwc3_reg->g_usb2phycfg[0]); -} - -static int rockchip_xhci_core_init(struct rockchip_xhci *rkxhci, - struct udevice *dev) -{ - int ret; - - ret = dwc3_core_init(rkxhci->dwc3_reg); - if (ret) { - pr_err("failed to initialize core\n"); - return ret; - } - - rockchip_dwc3_phy_setup(rkxhci->dwc3_reg, dev); - - /* We are hard-coding DWC3 core to Host Mode */ - dwc3_set_mode(rkxhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST); - - return 0; -} - -static int rockchip_xhci_core_exit(struct rockchip_xhci *rkxhci) -{ - return 0; -} - -static int xhci_usb_probe(struct udevice *dev) -{ - struct rockchip_xhci_platdata *plat = dev_get_platdata(dev); - struct rockchip_xhci *ctx = dev_get_priv(dev); - struct xhci_hcor *hcor; - int ret; - - ctx->hcd = (struct xhci_hccr *)plat->hcd_base; - ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET); - hcor = (struct xhci_hcor *)((uint64_t)ctx->hcd + - HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase))); - - if (plat->vbus_supply) { - ret = regulator_set_enable(plat->vbus_supply, true); - if (ret) { - pr_err("XHCI: failed to set VBus supply\n"); - return ret; - } - } - - ret = rockchip_xhci_core_init(ctx, dev); - if (ret) { - pr_err("XHCI: failed to initialize controller\n"); - return ret; - } - - return xhci_register(dev, ctx->hcd, hcor); -} - -static int xhci_usb_remove(struct udevice *dev) -{ - struct rockchip_xhci_platdata *plat = dev_get_platdata(dev); - struct rockchip_xhci *ctx = dev_get_priv(dev); - int ret; - - ret = xhci_deregister(dev); - if (ret) - return ret; - ret = rockchip_xhci_core_exit(ctx); - if (ret) - return ret; - - if (plat->vbus_supply) { - ret = regulator_set_enable(plat->vbus_supply, false); - if (ret) - pr_err("XHCI: failed to set VBus supply\n"); - } - - return ret; -} - -static const struct udevice_id xhci_usb_ids[] = { - { .compatible = "rockchip,rk3328-xhci" }, - { } -}; - -U_BOOT_DRIVER(usb_xhci) = { - .name = "xhci_rockchip", - .id = UCLASS_USB, - .of_match = xhci_usb_ids, - .ofdata_to_platdata = xhci_usb_ofdata_to_platdata, - .probe = xhci_usb_probe, - .remove = xhci_usb_remove, - .ops = &xhci_usb_ops, - .bind = dm_scan_fdt_dev, - .platdata_auto_alloc_size = sizeof(struct rockchip_xhci_platdata), - .priv_auto_alloc_size = sizeof(struct rockchip_xhci), - .flags = DM_FLAG_ALLOC_PRIV_DMA, -}; - -static const struct udevice_id usb_phy_ids[] = { - { .compatible = "rockchip,rk3328-usb3-phy" }, - { } -}; - -U_BOOT_DRIVER(usb_phy) = { - .name = "usb_phy_rockchip", - .of_match = usb_phy_ids, -}; -- 2.25.1