From 5f19c9302133cda54d5d1a6b1caa400260de9192 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Wed, 24 Apr 2019 13:44:12 +0800 Subject: [PATCH] sunxi: set PIO voltage to hardware-detected value on startup on H6 The Allwinner H6 SoC has a register to set the PIO banks' voltage. When it mismatches the real voltage supplied to the VCC to the PIO supply, the PIO will work improperly. The PIO controller also has a register that contains the status of each VCC rail of the PIO supplies, and it has the same definition with the configuration register. so we can just copy the content of this register to the configuration register at startup, to ensure the configuration is correct at startup stage. Signed-off-by: Icenowy Zheng [jagan: s/__maybe__unused/__maybe_unused] Signed-off-by: Jagan Teki Acked-by: Jagan Teki --- arch/arm/include/asm/arch-sunxi/gpio.h | 3 +++ arch/arm/mach-sunxi/board.c | 9 +++++++++ 2 files changed, 12 insertions(+) diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 40a3f845d0..a646ea6a3c 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -73,6 +73,9 @@ struct sunxi_gpio_reg { struct sunxi_gpio_int gpio_int; }; +#define SUN50I_H6_GPIO_POW_MOD_SEL 0x340 +#define SUN50I_H6_GPIO_POW_MOD_VAL 0x348 + #define BANK_TO_GPIO(bank) (((bank) < SUNXI_GPIO_L) ? \ &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \ &((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_L]) diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 8e9bb63d9d..db506367bf 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -65,6 +65,7 @@ struct mm_region *mem_map = sunxi_mem_map; static int gpio_init(void) { + __maybe_unused uint val; #if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F) #if defined(CONFIG_MACH_SUN4I) || \ defined(CONFIG_MACH_SUN7I) || \ @@ -139,6 +140,14 @@ static int gpio_init(void) #error Unsupported console port number. Please fix pin mux settings in board.c #endif +#ifdef CONFIG_MACH_SUN50I_H6 + /* Update PIO power bias configuration by copy hardware detected value */ + val = readl(SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL); + writel(val, SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL); + val = readl(SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL); + writel(val, SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL); +#endif + return 0; } -- 2.25.1