From 5e30e45c83264841018dc8135034426fd0c0f857 Mon Sep 17 00:00:00 2001 From: Lukas Auer Date: Wed, 21 Aug 2019 21:14:44 +0200 Subject: [PATCH] spl: support booting via RISC-V OpenSBI RISC-V OpenSBI is an open-source implementation of the RISC-V Supervisor Binary Interface (SBI) specification. It is required by Linux and U-Boot running in supervisor mode. This patch adds support for booting via the OpenSBI FW_DYNAMIC firmware. It supports OpenSBI version 0.4 and higher. In this configuration, U-Boot SPL starts in machine mode. After loading OpenSBI and U-Boot proper, it will start OpenSBI. All necessary parameters are generated by U-Boot SPL and are passed to OpenSBI. U-Boot proper is started in supervisor mode by OpenSBI. Support for OpenSBI is enabled with CONFIG_SPL_OPENSBI. An additional configuration entry, CONFIG_SPL_OPENSBI_LOAD_ADDR, is used to specify the load address of the OpenSBI firmware binary. It is not used directly in U-Boot and instead is intended to make the value available to scripts such as FIT configuration generators. The header file include/opensbi.h is based on header files from the OpenSBI project. They are recent, as of commit bae54f764570 ("firmware: Add fw_dynamic firmware"). Signed-off-by: Lukas Auer Reviewed-by: Bin Meng Tested-by: Bin Meng Reviewed-by: Anup Patel --- common/image.c | 1 + common/spl/Kconfig | 17 ++++++++ common/spl/Makefile | 1 + common/spl/spl.c | 6 +++ common/spl/spl_opensbi.c | 85 ++++++++++++++++++++++++++++++++++++++++ include/image.h | 1 + include/opensbi.h | 40 +++++++++++++++++++ include/spl.h | 5 +++ 8 files changed, 156 insertions(+) create mode 100644 common/spl/spl_opensbi.c create mode 100644 include/opensbi.h diff --git a/common/image.c b/common/image.c index 84e859a30f..645584b5ba 100644 --- a/common/image.c +++ b/common/image.c @@ -132,6 +132,7 @@ static const table_entry_t uimage_os[] = { #if defined(CONFIG_BOOTM_OPENRTOS) || defined(USE_HOSTCC) { IH_OS_OPENRTOS, "openrtos", "OpenRTOS", }, #endif + { IH_OS_OPENSBI, "opensbi", "RISC-V OpenSBI", }, { -1, "", "", }, }; diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 660aa66d84..644a109942 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1148,6 +1148,23 @@ config SPL_OPTEE OP-TEE is an open source Trusted OS which is loaded by SPL. More detail at: https://github.com/OP-TEE/optee_os +config SPL_OPENSBI + bool "Support RISC-V OpenSBI" + depends on RISCV && SPL_RISCV_MMODE && RISCV_SMODE + help + OpenSBI is an open-source implementation of the RISC-V Supervisor Binary + Interface (SBI) specification. U-Boot supports the OpenSBI FW_DYNAMIC + firmware. It is loaded and started by U-Boot SPL. + + More details are available at https://github.com/riscv/opensbi and + https://github.com/riscv/riscv-sbi-doc + +config SPL_OPENSBI_LOAD_ADDR + hex "OpenSBI load address" + depends on SPL_OPENSBI + help + Load address of the OpenSBI binary. + config TPL bool depends on SUPPORT_TPL diff --git a/common/spl/Makefile b/common/spl/Makefile index d28de692dd..5ce6f4ae48 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o +obj-$(CONFIG_$(SPL_TPL_)OPENSBI) += spl_opensbi.o obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o diff --git a/common/spl/spl.c b/common/spl/spl.c index 2c696f2a79..8c9415bedf 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -659,6 +659,12 @@ void board_init_r(gd_t *dummy1, ulong dummy2) (void *)spl_image.entry_point); break; #endif +#if CONFIG_IS_ENABLED(OPENSBI) + case IH_OS_OPENSBI: + debug("Jumping to U-Boot via RISC-V OpenSBI\n"); + spl_invoke_opensbi(&spl_image); + break; +#endif #ifdef CONFIG_SPL_OS_BOOT case IH_OS_LINUX: debug("Jumping to Linux\n"); diff --git a/common/spl/spl_opensbi.c b/common/spl/spl_opensbi.c new file mode 100644 index 0000000000..a6b4480ed2 --- /dev/null +++ b/common/spl/spl_opensbi.c @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Fraunhofer AISEC, + * Lukas Auer + * + * Based on common/spl/spl_atf.c + */ +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +struct fw_dynamic_info opensbi_info; + +static int spl_opensbi_find_uboot_node(void *blob, int *uboot_node) +{ + int fit_images_node, node; + const char *fit_os; + + fit_images_node = fdt_path_offset(blob, "/fit-images"); + if (fit_images_node < 0) + return -ENODEV; + + fdt_for_each_subnode(node, blob, fit_images_node) { + fit_os = fdt_getprop(blob, node, FIT_OS_PROP, NULL); + if (!fit_os) + continue; + + if (genimg_get_os_id(fit_os) == IH_OS_U_BOOT) { + *uboot_node = node; + return 0; + } + } + + return -ENODEV; +} + +void spl_invoke_opensbi(struct spl_image_info *spl_image) +{ + int ret, uboot_node; + ulong uboot_entry; + void (*opensbi_entry)(ulong hartid, ulong dtb, ulong info); + + if (!spl_image->fdt_addr) { + pr_err("No device tree specified in SPL image\n"); + hang(); + } + + /* Find U-Boot image in /fit-images */ + ret = spl_opensbi_find_uboot_node(spl_image->fdt_addr, &uboot_node); + if (ret) { + pr_err("Can't find U-Boot node, %d", ret); + hang(); + } + + /* Get U-Boot entry point */ + uboot_entry = fdt_getprop_u32(spl_image->fdt_addr, uboot_node, + "entry-point"); + if (uboot_entry == FDT_ERROR) + uboot_entry = fdt_getprop_u32(spl_image->fdt_addr, uboot_node, + "load-addr"); + + /* Prepare obensbi_info object */ + opensbi_info.magic = FW_DYNAMIC_INFO_MAGIC_VALUE; + opensbi_info.version = FW_DYNAMIC_INFO_VERSION; + opensbi_info.next_addr = uboot_entry; + opensbi_info.next_mode = FW_DYNAMIC_INFO_NEXT_MODE_S; + opensbi_info.options = SBI_SCRATCH_NO_BOOT_PRINTS; + + opensbi_entry = (void (*)(ulong, ulong, ulong))spl_image->entry_point; + invalidate_icache_all(); + +#ifdef CONFIG_SMP + ret = smp_call_function((ulong)spl_image->entry_point, + (ulong)spl_image->fdt_addr, + (ulong)&opensbi_info); + if (ret) + hang(); +#endif + opensbi_entry(gd->arch.boot_hart, (ulong)spl_image->fdt_addr, + (ulong)&opensbi_info); +} diff --git a/include/image.h b/include/image.h index 27d7cb9d1e..404b7338e6 100644 --- a/include/image.h +++ b/include/image.h @@ -156,6 +156,7 @@ enum { IH_OS_OPENRTOS, /* OpenRTOS */ IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */ IH_OS_TEE, /* Trusted Execution Environment */ + IH_OS_OPENSBI, /* RISC-V OpenSBI */ IH_OS_COUNT, }; diff --git a/include/opensbi.h b/include/opensbi.h new file mode 100644 index 0000000000..9f1d62e7dd --- /dev/null +++ b/include/opensbi.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: BSD-2-Clause */ +/* + * Copyright (c) 2019 Western Digital Corporation or its affiliates. + * + * Based on include/sbi/{fw_dynamic.h,sbi_scratch.h} from the OpenSBI project. + */ +#ifndef OPENSBI_H +#define OPENSBI_H + +/** Expected value of info magic ('OSBI' ascii string in hex) */ +#define FW_DYNAMIC_INFO_MAGIC_VALUE 0x4942534f + +/** Maximum supported info version */ +#define FW_DYNAMIC_INFO_VERSION 0x1 + +/** Possible next mode values */ +#define FW_DYNAMIC_INFO_NEXT_MODE_U 0x0 +#define FW_DYNAMIC_INFO_NEXT_MODE_S 0x1 +#define FW_DYNAMIC_INFO_NEXT_MODE_M 0x3 + +enum sbi_scratch_options { + /** Disable prints during boot */ + SBI_SCRATCH_NO_BOOT_PRINTS = (1 << 0), +}; + +/** Representation dynamic info passed by previous booting stage */ +struct fw_dynamic_info { + /** Info magic */ + unsigned long magic; + /** Info version */ + unsigned long version; + /** Next booting stage address */ + unsigned long next_addr; + /** Next booting stage mode */ + unsigned long next_mode; + /** Options for OpenSBI library */ + unsigned long options; +} __packed; + +#endif diff --git a/include/spl.h b/include/spl.h index a90f971a23..e4640f3830 100644 --- a/include/spl.h +++ b/include/spl.h @@ -374,6 +374,11 @@ void spl_invoke_atf(struct spl_image_info *spl_image); */ void spl_optee_entry(void *arg0, void *arg1, void *arg2, void *arg3); +/** + * spl_invoke_opensbi - boot using a RISC-V OpenSBI image + */ +void spl_invoke_opensbi(struct spl_image_info *spl_image); + /** * board_return_to_bootrom - allow for boards to continue with the boot ROM * -- 2.25.1