From 5cb1b7b395c0150e179f3b748d755cdc2f613a06 Mon Sep 17 00:00:00 2001 From: Mirza Krak Date: Tue, 8 Sep 2015 10:30:49 +0200 Subject: [PATCH] spi: tegra20: Add support for mode selection Respect the mode passed in set_mode ops. Signed-off-by: Mirza Krak Reviewed-by: Jagan Teki --- drivers/spi/tegra20_slink.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/spi/tegra20_slink.c b/drivers/spi/tegra20_slink.c index fbb665b86f..144716fd91 100644 --- a/drivers/spi/tegra20_slink.c +++ b/drivers/spi/tegra20_slink.c @@ -36,6 +36,11 @@ DECLARE_GLOBAL_DATA_PTR; #define SLINK_CMD_ENB (1 << 31) #define SLINK_CMD_GO (1 << 30) #define SLINK_CMD_M_S (1 << 28) +#define SLINK_CMD_IDLE_SCLK_DRIVE_LOW (0 << 24) +#define SLINK_CMD_IDLE_SCLK_DRIVE_HIGH (1 << 24) +#define SLINK_CMD_IDLE_SCLK_PULL_LOW (2 << 24) +#define SLINK_CMD_IDLE_SCLK_PULL_HIGH (3 << 24) +#define SLINK_CMD_IDLE_SCLK_MASK (3 << 24) #define SLINK_CMD_CK_SDA (1 << 21) #define SLINK_CMD_CS_POL (1 << 13) #define SLINK_CMD_CS_VAL (1 << 12) @@ -331,6 +336,22 @@ static int tegra30_spi_set_speed(struct udevice *bus, uint speed) static int tegra30_spi_set_mode(struct udevice *bus, uint mode) { struct tegra30_spi_priv *priv = dev_get_priv(bus); + struct spi_regs *regs = priv->regs; + u32 reg; + + reg = readl(®s->command); + + /* Set CPOL and CPHA */ + reg &= ~(SLINK_CMD_IDLE_SCLK_MASK | SLINK_CMD_CK_SDA); + if (mode & SPI_CPHA) + reg |= SLINK_CMD_CK_SDA; + + if (mode & SPI_CPOL) + reg |= SLINK_CMD_IDLE_SCLK_DRIVE_HIGH; + else + reg |= SLINK_CMD_IDLE_SCLK_DRIVE_LOW; + + writel(reg, ®s->command); priv->mode = mode; debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode); -- 2.25.1