From 5c6925a23b84430782ab84eac75ade065c6adbb3 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 20 Apr 2015 15:00:20 +0000 Subject: [PATCH] ar71xx: Remove TX/RX delay from pll_1000 for OM5P-AN The tx/rx delay bits in the ETH_XMII_CONTROL register have to be unset when the enable_rgmii_rx_delay/enable_rgmii_tx_delay will be set in the AT803x PHY. Othwise the throughput in gigabit mode is heavily reduced. Signed-off-by: Sven Eckelmann SVN-Revision: 45521 --- target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c index 272e410a36..298e80ce6c 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c @@ -202,7 +202,7 @@ static void __init om5p_an_setup(void) ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ath79_eth0_data.phy_mask = BIT(7); - ath79_eth0_pll_data.pll_1000 = 0x1a000000; + ath79_eth0_pll_data.pll_1000 = 0x02000000; ath79_eth0_pll_data.pll_100 = 0x00000101; ath79_eth0_pll_data.pll_10 = 0x00001313; ath79_register_eth(0); -- 2.25.1