From 5ae8e1bf7bcdeee6f82513ec9b9571a09571a51c Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 16 Jul 2009 19:01:45 +0000 Subject: [PATCH] Get rid of glamo-lcm-spi. It's not used and probably never will be. SVN-Revision: 16871 --- target/linux/s3c24xx/config-2.6.30 | 3 +- .../files-2.6.30/drivers/mfd/glamo/Kconfig | 8 - .../files-2.6.30/drivers/mfd/glamo/Makefile | 1 - .../drivers/mfd/glamo/glamo-lcm-spi.c | 241 ------------------ 4 files changed, 2 insertions(+), 251 deletions(-) delete mode 100644 target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c diff --git a/target/linux/s3c24xx/config-2.6.30 b/target/linux/s3c24xx/config-2.6.30 index b28237da55..759966ded9 100644 --- a/target/linux/s3c24xx/config-2.6.30 +++ b/target/linux/s3c24xx/config-2.6.30 @@ -99,6 +99,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_TMIO is not set # CONFIG_FB_VIRTUAL is not set CONFIG_FIQ=y # CONFIG_FIRMWARE_EDID is not set @@ -248,11 +249,11 @@ CONFIG_MACH_NEO1973_GTA02=y # CONFIG_MACH_TCT_HAMMER is not set # CONFIG_MACH_VR1000 is not set # CONFIG_MACH_VSTMS is not set +CONFIG_MFD_CORE=y CONFIG_MFD_GLAMO=y CONFIG_MFD_GLAMO_FB=y # CONFIG_MFD_GLAMO_FB_XGLAMO_WORKAROUND is not set CONFIG_MFD_GLAMO_MCI=y -CONFIG_MFD_GLAMO_SPI_FB=y CONFIG_MFD_GLAMO_SPI_GPIO=y CONFIG_MFD_PCF50633=y # CONFIG_MFD_T7L66XB is not set diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig index c27c130895..2ae335a190 100644 --- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig +++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig @@ -41,14 +41,6 @@ config MFD_GLAMO_SPI_GPIO help Enable a bitbanging SPI adapter driver for the Smedia Glamo. -config MFD_GLAMO_SPI_FB - tristate "Glamo LCM control channel SPI support" - depends on MFD_GLAMO_FB - help - Enable a bitbanging SPI adapter driver for the Smedia Glamo LCM - control channel. This SPI interface is frequently used to - interconnect the LCM control interface. - config MFD_GLAMO_MCI tristate "Glamo S3C SD/MMC Card Interface support" depends on MFD_GLAMO && MMC diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile index dc64d50fa1..99a927a5bf 100644 --- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile +++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile @@ -7,6 +7,5 @@ obj-$(CONFIG_MFD_GLAMO_SPI) += glamo-spi.o obj-$(CONFIG_MFD_GLAMO_SPI_GPIO) += glamo-spi-gpio.o obj-$(CONFIG_MFD_GLAMO_FB) += glamo-fb.o -obj-$(CONFIG_MFD_GLAMO_SPI_FB) += glamo-lcm-spi.o obj-$(CONFIG_MFD_GLAMO_MCI) += glamo-mci.o diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c deleted file mode 100644 index 45d12fce6e..0000000000 --- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * Copyright (C) 2007 Openmoko, Inc. - * Author: Harald Welte - * - * Smedia Glamo GPIO based SPI driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This driver currently only implements a minimum subset of the hardware - * features, esp. those features that are required to drive the jbt6k74 - * LCM controller asic in the TD028TTEC1 LCM. - * -*/ - -#define DEBUG -#if 0 -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include - -#include "glamo-core.h" -#include "glamo-regs.h" - -struct glamo_spi { - struct spi_bitbang bitbang; - struct spi_master *master; - struct glamo_spi_info *info; - struct device *dev; -}; - -static inline struct glamo_spi *to_gs(struct spi_device *spi) -{ - return spi->controller_data; -} - -static int glamo_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t) -{ - unsigned int bpw; - - bpw = t ? t->bits_per_word : spi->bits_per_word; - - if (bpw != 9 && bpw != 8) { - dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw); - return -EINVAL; - } - - return 0; -} - -static void glamo_spi_chipsel(struct spi_device *spi, int value) -{ -#if 0 - struct glamo_spi *gs = to_gs(spi); - - dev_dbg(&spi->dev, "chipsel %d: spi=%p, gs=%p, info=%p, handle=%p\n", - value, spi, gs, gs->info, gs->info->glamofb_handle); - - glamofb_cmd_mode(gs->info->glamofb_handle, value); -#endif -} - -static int glamo_spi_txrx(struct spi_device *spi, struct spi_transfer *t) -{ - struct glamo_spi *gs = to_gs(spi); - const u_int16_t *ui16 = (const u_int16_t *) t->tx_buf; - u_int16_t nine_bits; - int i; - - dev_dbg(&spi->dev, "txrx: tx %p, rx %p, bpw %d, len %d\n", - t->tx_buf, t->rx_buf, t->bits_per_word, t->len); - - if (spi->bits_per_word == 9) - nine_bits = (1 << 9); - else - nine_bits = 0; - - if (t->len > 3 * sizeof(u_int16_t)) { - dev_err(&spi->dev, "this driver doesn't support " - "%u sized xfers\n", t->len); - return -EINVAL; - } - - for (i = 0; i < t->len/sizeof(u_int16_t); i++) { - /* actually transfer the data */ -#if 1 - glamofb_cmd_write(gs->info->glamofb_handle, - GLAMO_LCD_CMD_TYPE_SERIAL | nine_bits | - (1 << 10) | (1 << 11) | (ui16[i] & 0x1ff)); -#endif - /* FIXME: fire ?!? */ - if (i == 0 && (ui16[i] & 0x1ff) == 0x29) { - dev_dbg(&spi->dev, "leaving command mode\n"); - glamofb_cmd_mode(gs->info->glamofb_handle, 0); - } - } - - return t->len; -} - -static int glamo_spi_setup(struct spi_device *spi) -{ - int ret; - - if (!spi->bits_per_word) - spi->bits_per_word = 9; - - /* FIXME: hardware can do this */ - if (spi->mode & SPI_LSB_FIRST) - return -EINVAL; - - ret = glamo_spi_setupxfer(spi, NULL); - if (ret < 0) { - dev_err(&spi->dev, "setupxfer returned %d\n", ret); - return ret; - } - - dev_dbg(&spi->dev, "%s: mode %d, %u bpw\n", - __FUNCTION__, spi->mode, spi->bits_per_word); - - return 0; -} - -static int glamo_spi_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct glamo_spi *sp; - int ret; - int i; - - master = spi_alloc_master(&pdev->dev, sizeof(struct glamo_spi)); - if (master == NULL) { - dev_err(&pdev->dev, "failed to allocate spi master\n"); - ret = -ENOMEM; - goto err; - } - - sp = spi_master_get_devdata(master); - memset(sp, 0, sizeof(struct glamo_spi)); - - sp->master = spi_master_get(master); - sp->info = pdev->dev.platform_data; - if (!sp->info) { - dev_err(&pdev->dev, "can't operate without platform data\n"); - ret = -EIO; - goto err_no_pdev; - } - dev_dbg(&pdev->dev, "sp->info(pdata) = %p\n", sp->info); - - sp->dev = &pdev->dev; - - platform_set_drvdata(pdev, sp); - - sp->bitbang.master = sp->master; - sp->bitbang.setup_transfer = glamo_spi_setupxfer; - sp->bitbang.chipselect = glamo_spi_chipsel; - sp->bitbang.txrx_bufs = glamo_spi_txrx; - sp->bitbang.master->setup = glamo_spi_setup; - - ret = spi_bitbang_start(&sp->bitbang); - if (ret) - goto err_no_bitbang; - - /* register the chips to go with the board */ - - glamofb_cmd_mode(sp->info->glamofb_handle, 1); - - for (i = 0; i < sp->info->board_size; i++) { - dev_info(&pdev->dev, "registering %p: %s\n", - &sp->info->board_info[i], - sp->info->board_info[i].modalias); - - sp->info->board_info[i].controller_data = sp; - spi_new_device(master, sp->info->board_info + i); - } - - return 0; - -err_no_bitbang: - platform_set_drvdata(pdev, NULL); -err_no_pdev: - spi_master_put(sp->bitbang.master); -err: - return ret; - -} - -static int glamo_spi_remove(struct platform_device *pdev) -{ - struct glamo_spi *sp = platform_get_drvdata(pdev); - - spi_bitbang_stop(&sp->bitbang); - spi_master_put(sp->bitbang.master); - - return 0; -} - -#define glamo_spi_suspend NULL -#define glamo_spi_resume NULL - -static struct platform_driver glamo_spi_drv = { - .probe = glamo_spi_probe, - .remove = glamo_spi_remove, - .suspend = glamo_spi_suspend, - .resume = glamo_spi_resume, - .driver = { - .name = "glamo-lcm-spi", - .owner = THIS_MODULE, - }, -}; - -static int __init glamo_spi_init(void) -{ - return platform_driver_register(&glamo_spi_drv); -} - -static void __exit glamo_spi_exit(void) -{ - platform_driver_unregister(&glamo_spi_drv); -} - -module_init(glamo_spi_init); -module_exit(glamo_spi_exit); - -MODULE_DESCRIPTION("Smedia Glamo 336x/337x LCM serial command SPI Driver"); -MODULE_AUTHOR("Harald Welte ") -MODULE_LICENSE("GPL"); -#endif -- 2.25.1