From 5985c56ec6ba696bf8cc9f0eb90bd498b4bb46a1 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 17 Jan 2016 19:55:55 +0000 Subject: [PATCH] lantiq: Add a rewritten version of the SPI driver The new driver provides a few improvements over the old one: - Separate compatible strings per SoC type (this allows removing some hardcoded of_device_is_compatible() checks) - It does not rely upon spi-bitbang anymore - chip-selects are numbered as in the datasheet (= starting at 1 instead of 0) Signed-off-by: Martin Blumenstingl SVN-Revision: 48292 --- ...dd-support-for-Lantiq-SPI-controller.patch | 1133 +++++++++++++++++ 1 file changed, 1133 insertions(+) create mode 100644 target/linux/lantiq/patches-4.1/0100-spi-add-support-for-Lantiq-SPI-controller.patch diff --git a/target/linux/lantiq/patches-4.1/0100-spi-add-support-for-Lantiq-SPI-controller.patch b/target/linux/lantiq/patches-4.1/0100-spi-add-support-for-Lantiq-SPI-controller.patch new file mode 100644 index 0000000000..052b232e6b --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0100-spi-add-support-for-Lantiq-SPI-controller.patch @@ -0,0 +1,1133 @@ +From 0175fc559debc22fe8d17e9b8ffd1452e0a4667d Mon Sep 17 00:00:00 2001 +From: Daniel Schwierzeck +Date: Tue, 16 Dec 2014 15:40:32 +0100 +Subject: [PATCH 1/2] spi: add support for Lantiq SPI controller + +Signed-off-by: Daniel Schwierzeck +--- + drivers/spi/Kconfig | 7 + + drivers/spi/Makefile | 1 + + drivers/spi/spi-lantiq.c | 1089 ++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 1097 insertions(+) + create mode 100644 drivers/spi/spi-lantiq.c + +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -334,6 +334,13 @@ config SPI_MESON_SPIFC + This enables master mode support for the SPIFC (SPI flash + controller) available in Amlogic Meson SoCs. + ++config SPI_LANTIQ ++ tristate "Lantiq SPI controller" ++ depends on LANTIQ && (SOC_TYPE_XWAY || SOC_FALCON) ++ help ++ This driver supports the Lantiq SPI controller in master ++ mode. ++ + config SPI_OC_TINY + tristate "OpenCores tiny SPI" + depends on GPIOLIB +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -44,6 +44,7 @@ obj-$(CONFIG_SPI_GPIO) += spi-gpio.o + obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o + obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o + obj-$(CONFIG_SPI_IMX) += spi-imx.o ++obj-$(CONFIG_SPI_LANTIQ) += spi-lantiq.o + obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o + obj-$(CONFIG_SPI_MESON_SPIFC) += spi-meson-spifc.o + obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o +--- /dev/null ++++ b/drivers/spi/spi-lantiq.c +@@ -0,0 +1,1091 @@ ++/* ++ * Copyright (C) 2011-2015 Daniel Schwierzeck ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define SPI_RX_IRQ_NAME "spi_rx" ++#define SPI_TX_IRQ_NAME "spi_tx" ++#define SPI_ERR_IRQ_NAME "spi_err" ++#define SPI_FRM_IRQ_NAME "spi_frm" ++ ++#define SPI_CLC 0x00 ++#define SPI_PISEL 0x04 ++#define SPI_ID 0x08 ++#define SPI_CON 0x10 ++#define SPI_STAT 0x14 ++#define SPI_WHBSTATE 0x18 ++#define SPI_TB 0x20 ++#define SPI_RB 0x24 ++#define SPI_RXFCON 0x30 ++#define SPI_TXFCON 0x34 ++#define SPI_FSTAT 0x38 ++#define SPI_BRT 0x40 ++#define SPI_BRSTAT 0x44 ++#define SPI_SFCON 0x60 ++#define SPI_SFSTAT 0x64 ++#define SPI_GPOCON 0x70 ++#define SPI_GPOSTAT 0x74 ++#define SPI_FPGO 0x78 ++#define SPI_RXREQ 0x80 ++#define SPI_RXCNT 0x84 ++#define SPI_DMACON 0xec ++#define SPI_IRNEN 0xf4 ++#define SPI_IRNICR 0xf8 ++#define SPI_IRNCR 0xfc ++ ++#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ ++#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S) ++#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ ++#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S) ++#define SPI_CLC_DISS BIT(1) /* Disable status bit */ ++#define SPI_CLC_DISR BIT(0) /* Disable request bit */ ++ ++#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ ++#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S) ++#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ ++#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S) ++#define SPI_ID_REV_M 0x1F /* Hardware revision number */ ++#define SPI_ID_CFG BIT(5) /* DMA interface support */ ++ ++#define SPI_CON_BM_S 16 /* Data width selection */ ++#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S) ++#define SPI_CON_EM BIT(24) /* Echo mode */ ++#define SPI_CON_IDLE BIT(23) /* Idle bit value */ ++#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */ ++#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ ++#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ ++#define SPI_CON_AEN BIT(10) /* Abort error enable */ ++#define SPI_CON_REN BIT(9) /* Receive overflow error enable */ ++#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ ++#define SPI_CON_LB BIT(7) /* Loopback control */ ++#define SPI_CON_PO BIT(6) /* Clock polarity control */ ++#define SPI_CON_PH BIT(5) /* Clock phase control */ ++#define SPI_CON_HB BIT(4) /* Heading control */ ++#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */ ++#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ ++ ++#define SPI_STAT_RXBV_S 28 ++#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S) ++#define SPI_STAT_BSY BIT(13) /* Busy flag */ ++#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ ++#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ ++#define SPI_STAT_AE BIT(10) /* Abort error flag */ ++#define SPI_STAT_RE BIT(9) /* Receive error flag */ ++#define SPI_STAT_TE BIT(8) /* Transmit error flag */ ++#define SPI_STAT_ME BIT(7) /* Mode error flag */ ++#define SPI_STAT_MS BIT(1) /* Master/slave select bit */ ++#define SPI_STAT_EN BIT(0) /* Enable bit */ ++ ++#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ ++#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ ++#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ ++#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ ++#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ ++#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ ++#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ ++#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ ++#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ ++#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ ++#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ ++#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ ++#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ ++#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ ++#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ ++#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ ++#define SPI_WHBSTATE_CLR_ERRORS 0x0F50 ++ ++#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ ++#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S) ++#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ ++#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ ++ ++#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ ++#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S) ++#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ ++#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ ++ ++#define SPI_FSTAT_RXFFL_S 0 ++#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S) ++#define SPI_FSTAT_TXFFL_S 8 ++#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S) ++ ++#define SPI_GPOCON_ISCSBN_S 8 ++#define SPI_GPOCON_INVOUTN_S 0 ++ ++#define SPI_FGPO_SETOUTN_S 8 ++#define SPI_FGPO_CLROUTN_S 0 ++ ++#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ ++#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ ++ ++#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ ++#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ ++#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */ ++#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ ++#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ ++#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ ++#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ ++#define SPI_IRNEN_ALL 0x1F ++ ++struct lantiq_spi_hwcfg { ++ unsigned int num_chipselect; ++ unsigned int irnen_r; ++ unsigned int irnen_t; ++}; ++ ++struct lantiq_spi { ++ struct spi_master *master; ++ struct device *dev; ++ void __iomem *regbase; ++ struct clk *spi_clk; ++ struct clk *fpi_clk; ++ const struct lantiq_spi_hwcfg *hwcfg; ++ ++ spinlock_t lock; ++ struct completion xfer_complete; ++ ++ const u8 *tx; ++ u8 *rx; ++ unsigned int tx_todo; ++ unsigned int rx_todo; ++ unsigned int bits_per_word; ++ unsigned int speed_hz; ++ int status; ++ unsigned long timeout; ++ unsigned int cs_delay; ++}; ++ ++struct lantiq_spi_cstate { ++ int cs_gpio; ++}; ++ ++static u32 lantiq_spi_readl(const struct lantiq_spi *spi, u32 reg) ++{ ++ return readl_be(spi->regbase + reg); ++} ++ ++static void lantiq_spi_writel(const struct lantiq_spi *spi, u32 val, u32 reg) ++{ ++ writel_be(val, spi->regbase + reg); ++} ++ ++static void lantiq_spi_maskl(const struct lantiq_spi *spi, u32 clr, u32 set, ++ u32 reg) ++{ ++ u32 val = readl_be(spi->regbase + reg); ++ val &= ~clr; ++ val |= set; ++ writel_be(val, spi->regbase + reg); ++} ++ ++static int supports_dma(const struct lantiq_spi *spi) ++{ ++ u32 id = lantiq_spi_readl(spi, SPI_ID); ++ return id & SPI_ID_CFG; ++} ++ ++static unsigned int tx_fifo_size(const struct lantiq_spi *spi) ++{ ++ u32 id = lantiq_spi_readl(spi, SPI_ID); ++ return (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S; ++} ++ ++static unsigned int rx_fifo_size(const struct lantiq_spi *spi) ++{ ++ u32 id = lantiq_spi_readl(spi, SPI_ID); ++ return (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S; ++} ++ ++static unsigned int tx_fifo_level(const struct lantiq_spi *spi) ++{ ++ u32 fstat = lantiq_spi_readl(spi, SPI_FSTAT); ++ return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S; ++} ++ ++static unsigned int rx_fifo_level(const struct lantiq_spi *spi) ++{ ++ u32 fstat = lantiq_spi_readl(spi, SPI_FSTAT); ++ return fstat & SPI_FSTAT_RXFFL_M; ++} ++ ++static unsigned int tx_fifo_free(const struct lantiq_spi *spi) ++{ ++ return tx_fifo_size(spi) - tx_fifo_level(spi); ++} ++ ++static void rx_fifo_reset(const struct lantiq_spi *spi) ++{ ++ u32 val = rx_fifo_size(spi) << SPI_RXFCON_RXFITL_S; ++ val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU; ++ lantiq_spi_writel(spi, val, SPI_RXFCON); ++} ++ ++static void tx_fifo_reset(const struct lantiq_spi *spi) ++{ ++ u32 val = 1 << SPI_TXFCON_TXFITL_S; ++ val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU; ++ lantiq_spi_writel(spi, val, SPI_TXFCON); ++} ++ ++static void rx_fifo_flush(const struct lantiq_spi *spi) ++{ ++ lantiq_spi_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON); ++} ++ ++static void tx_fifo_flush(const struct lantiq_spi *spi) ++{ ++ lantiq_spi_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON); ++} ++ ++static int hw_is_busy(const struct lantiq_spi *spi) ++{ ++ u32 stat = lantiq_spi_readl(spi, SPI_STAT); ++ return stat & SPI_STAT_BSY; ++} ++ ++static void hw_enter_config_mode(const struct lantiq_spi *spi) ++{ ++ lantiq_spi_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE); ++} ++ ++static void hw_enter_active_mode(const struct lantiq_spi *spi) ++{ ++ lantiq_spi_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE); ++} ++ ++static void hw_setup_speed_hz(const struct lantiq_spi *spi, ++ unsigned int max_speed_hz) ++{ ++ u32 spi_clk, brt; ++ ++ /* ++ * SPI module clock is derived from FPI bus clock dependent on ++ * divider value in CLC.RMS which is always set to 1. ++ * ++ * f_SPI ++ * baudrate = -------------- ++ * 2 * (BR + 1) ++ */ ++ spi_clk = clk_get_rate(spi->fpi_clk) / 2; ++ ++ if (max_speed_hz > spi_clk) ++ brt = 0; ++ else ++ brt = spi_clk / max_speed_hz - 1; ++ ++ if (brt > 0xFFFF) ++ brt = 0xFFFF; ++ ++ dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n", ++ spi_clk, max_speed_hz, brt); ++ ++ lantiq_spi_writel(spi, brt, SPI_BRT); ++} ++ ++static void hw_setup_bits_per_word(const struct lantiq_spi *spi, ++ unsigned int bits_per_word) ++{ ++ u32 bm; ++ ++ /* CON.BM value = bits_per_word - 1 */ ++ bm = (bits_per_word - 1) << SPI_CON_BM_S; ++ ++ lantiq_spi_maskl(spi, SPI_CON_BM_M, bm, SPI_CON); ++} ++ ++static void hw_setup_clock_mode(const struct lantiq_spi *spi, ++ unsigned int mode) ++{ ++ u32 con_set = 0, con_clr = 0; ++ ++ /* ++ * SPI mode mapping in CON register: ++ * Mode CPOL CPHA CON.PO CON.PH ++ * 0 0 0 0 1 ++ * 1 0 1 0 0 ++ * 2 1 0 1 1 ++ * 3 1 1 1 0 ++ */ ++ if (mode & SPI_CPHA) ++ con_clr |= SPI_CON_PH; ++ else ++ con_set |= SPI_CON_PH; ++ ++ if (mode & SPI_CPOL) ++ con_set |= SPI_CON_PO | SPI_CON_IDLE; ++ else ++ con_clr |= SPI_CON_PO | SPI_CON_IDLE; ++ ++ /* Set heading control */ ++ if (mode & SPI_LSB_FIRST) ++ con_clr |= SPI_CON_HB; ++ else ++ con_set |= SPI_CON_HB; ++ ++ /* Set loopback mode */ ++ if (mode & SPI_LOOP) ++ con_set |= SPI_CON_LB; ++ else ++ con_clr |= SPI_CON_LB; ++ ++ lantiq_spi_maskl(spi, con_clr, con_set, SPI_CON); ++} ++ ++static void lantiq_spi_hw_init(const struct lantiq_spi *spi) ++{ ++ /* ++ * Set clock divider for run mode to 1 to ++ * run at same frequency as FPI bus ++ */ ++ lantiq_spi_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC); ++ ++ /* Put controller into config mode */ ++ hw_enter_config_mode(spi); ++ ++ /* Disable all interrupts */ ++ lantiq_spi_writel(spi, 0, SPI_IRNEN); ++ ++ /* Clear error flags */ ++ lantiq_spi_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); ++ ++ /* Enable error checking, disable TX/RX */ ++ lantiq_spi_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN | ++ SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); ++ ++ /* Setup default SPI mode */ ++ hw_setup_bits_per_word(spi, spi->bits_per_word); ++ hw_setup_clock_mode(spi, SPI_MODE_0); ++ ++ /* Enable master mode and clear error flags */ ++ lantiq_spi_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS, ++ SPI_WHBSTATE); ++ ++ /* Reset GPIO/CS registers */ ++ lantiq_spi_writel(spi, 0, SPI_GPOCON); ++ lantiq_spi_writel(spi, 0xFF00, SPI_FPGO); ++ ++ /* Enable and flush FIFOs */ ++ rx_fifo_reset(spi); ++ tx_fifo_reset(spi); ++} ++ ++static void hw_chipselect_set(struct lantiq_spi *spi, unsigned int cs) ++{ ++ u32 fgpo = (1 << (cs - 1 + SPI_FGPO_SETOUTN_S)); ++ lantiq_spi_writel(spi, fgpo, SPI_FPGO); ++} ++ ++static void hw_chipselect_clear(struct lantiq_spi *spi, unsigned int cs) ++{ ++ u32 fgpo = (1 << (cs - 1)); ++ lantiq_spi_writel(spi, fgpo, SPI_FPGO); ++} ++ ++static void hw_chipselect_init(struct lantiq_spi *spi, unsigned int cs, ++ unsigned int cs_high) ++{ ++ u32 gpocon; ++ ++ /* set GPO pin to CS mode */ ++ gpocon = 1 << ((cs - 1) + SPI_GPOCON_ISCSBN_S); ++ ++ /* invert GPO pin */ ++ if (cs_high) ++ gpocon |= 1 << (cs - 1); ++ ++ lantiq_spi_maskl(spi, 0, gpocon, SPI_GPOCON); ++} ++ ++static void chipselect_enable(struct spi_device *spidev) ++{ ++ struct lantiq_spi *spi = spi_master_get_devdata(spidev->master); ++ struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev); ++ ++ if (cstate->cs_gpio >= 0) ++ gpio_set_value(cstate->cs_gpio, spidev->mode & SPI_CS_HIGH); ++ else ++ hw_chipselect_clear(spi, spidev->chip_select); ++ ++ /* CS setup/recovery time */ ++ if (spi->cs_delay) ++ ndelay(spi->cs_delay); ++} ++ ++static void chipselect_disable(struct spi_device *spidev) ++{ ++ struct lantiq_spi *spi = spi_master_get_devdata(spidev->master); ++ struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev); ++ ++ /* CS hold time */ ++ if (spi->cs_delay) ++ ndelay(spi->cs_delay); ++ ++ if (cstate->cs_gpio >= 0) ++ gpio_set_value(cstate->cs_gpio, !(spidev->mode & SPI_CS_HIGH)); ++ else ++ hw_chipselect_set(spi, spidev->chip_select); ++ ++ /* CS setup/recovery time */ ++ if (spi->cs_delay) ++ ndelay(spi->cs_delay); ++} ++ ++static int lantiq_spi_setup(struct spi_device *spidev) ++{ ++ struct lantiq_spi *spi = spi_master_get_devdata(spidev->master); ++ struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev); ++ int err; ++ ++ if (!cstate) { ++ cstate = kzalloc(sizeof(*cstate), GFP_KERNEL); ++ if (!cstate) ++ return -ENOMEM; ++ ++ spi_set_ctldata(spidev, cstate); ++ cstate->cs_gpio = -ENOENT; ++ ++ if (spidev->cs_gpio >= 0) { ++ dev_dbg(spi->dev, "using chipselect %u on GPIO %d\n", ++ spidev->chip_select, spidev->cs_gpio); ++ ++ err = gpio_request(spidev->cs_gpio, dev_name(spi->dev)); ++ if (err) ++ return err; ++ ++ gpio_direction_output(spidev->cs_gpio, ++ !(spidev->mode & SPI_CS_HIGH)); ++ ++ cstate->cs_gpio = spidev->cs_gpio; ++ } else { ++ dev_dbg(spi->dev, "using internal chipselect %u\n", ++ spidev->chip_select); ++ ++ hw_chipselect_init(spi, spidev->chip_select, ++ spidev->mode & SPI_CS_HIGH); ++ hw_chipselect_set(spi, spidev->chip_select); ++ } ++ } ++ ++ return 0; ++} ++ ++static void lantiq_spi_cleanup(struct spi_device *spidev) ++{ ++ struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev); ++ ++ if (cstate->cs_gpio >= 0) ++ gpio_free(cstate->cs_gpio); ++ ++ kfree(cstate); ++ spi_set_ctldata(spidev, NULL); ++} ++ ++static void hw_setup_message(const struct lantiq_spi *spi, ++ struct spi_device *spidev) ++{ ++ const struct lantiq_spi_hwcfg *hwcfg = spi->hwcfg; ++ ++ hw_enter_config_mode(spi); ++ hw_setup_clock_mode(spi, spidev->mode); ++ hw_enter_active_mode(spi); ++ ++ /* Enable interrupts */ ++ lantiq_spi_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E, ++ SPI_IRNEN); ++} ++ ++static void hw_setup_transfer(struct lantiq_spi *spi, struct spi_device *spidev, ++ struct spi_transfer *t) ++{ ++ unsigned int speed_hz, bits_per_word; ++ u32 con; ++ ++ if (t->speed_hz) ++ speed_hz = t->speed_hz; ++ else ++ speed_hz = spidev->max_speed_hz; ++ ++ if (t->bits_per_word) ++ bits_per_word = t->bits_per_word; ++ else ++ bits_per_word = spidev->bits_per_word; ++ ++ if (bits_per_word != spi->bits_per_word || ++ speed_hz != spi->speed_hz) { ++ hw_enter_config_mode(spi); ++ hw_setup_speed_hz(spi, speed_hz); ++ hw_setup_bits_per_word(spi, bits_per_word); ++ hw_enter_active_mode(spi); ++ ++ spi->speed_hz = speed_hz; ++ spi->bits_per_word = bits_per_word; ++ } ++ ++ /* Configure transmitter and receiver */ ++ con = lantiq_spi_readl(spi, SPI_CON); ++ if (t->tx_buf) ++ con &= ~SPI_CON_TXOFF; ++ else ++ con |= SPI_CON_TXOFF; ++ ++ if (t->rx_buf) ++ con &= ~SPI_CON_RXOFF; ++ else ++ con |= SPI_CON_RXOFF; ++ ++ lantiq_spi_writel(spi, con, SPI_CON); ++} ++ ++static void hw_finish_message(const struct lantiq_spi *spi) ++{ ++ /* Disable interrupts */ ++ lantiq_spi_writel(spi, 0, SPI_IRNEN); ++ ++ /* Disable transmitter and receiver */ ++ lantiq_spi_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); ++} ++ ++static void tx_fifo_write(struct lantiq_spi *spi) ++{ ++ const u8 *tx8; ++ const u16 *tx16; ++ const u32 *tx32; ++ u32 data; ++ unsigned int tx_free = tx_fifo_free(spi); ++ ++ while (spi->tx_todo && tx_free) { ++ switch (spi->bits_per_word) { ++ case 8: ++ tx8 = spi->tx; ++ data = *tx8; ++ spi->tx_todo--; ++ spi->tx++; ++ break; ++ case 16: ++ tx16 = (u16 *) spi->tx; ++ data = *tx16; ++ spi->tx_todo -= 2; ++ spi->tx += 2; ++ break; ++ case 32: ++ tx32 = (u32 *) spi->tx; ++ data = *tx32; ++ spi->tx_todo -= 4; ++ spi->tx += 4; ++ break; ++ default: ++ BUG(); ++ } ++ ++ lantiq_spi_writel(spi, data, SPI_TB); ++ tx_free--; ++ } ++} ++ ++static void rx_fifo_read_full_duplex(struct lantiq_spi *spi) ++{ ++ u8 *rx8; ++ u16 *rx16; ++ u32 *rx32; ++ u32 data; ++ unsigned int rx_fill = rx_fifo_level(spi); ++ ++ while (rx_fill) { ++ data = lantiq_spi_readl(spi, SPI_RB); ++ ++ switch (spi->bits_per_word) { ++ case 8: ++ rx8 = spi->rx; ++ *rx8 = data; ++ spi->rx_todo--; ++ spi->rx++; ++ break; ++ case 16: ++ rx16 = (u16 *) spi->rx; ++ *rx16 = data; ++ spi->rx_todo -= 2; ++ spi->rx += 2; ++ break; ++ case 32: ++ rx32 = (u32 *) spi->rx; ++ *rx32 = data; ++ spi->rx_todo -= 4; ++ spi->rx += 4; ++ break; ++ default: ++ BUG(); ++ } ++ ++ rx_fill--; ++ } ++} ++ ++static void rx_fifo_read_half_duplex(struct lantiq_spi *spi) ++{ ++ u32 data, *rx32; ++ u8 *rx8; ++ unsigned int rxbv, shift; ++ unsigned int rx_fill = rx_fifo_level(spi); ++ ++ /* ++ * In RX-only mode the bits per word value is ignored by HW. A value ++ * of 32 is used instead. Thus all 4 bytes per FIFO must be read. ++ * If remaining RX bytes are less than 4, the FIFO must be read ++ * differently. The amount of received and valid bytes is indicated ++ * by STAT.RXBV register value. ++ */ ++ while (rx_fill) { ++ if (spi->rx_todo < 4) { ++ rxbv = (lantiq_spi_readl(spi, SPI_STAT) & ++ SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S; ++ data = lantiq_spi_readl(spi, SPI_RB); ++ ++ shift = (rxbv - 1) * 8; ++ rx8 = spi->rx; ++ ++ while (rxbv) { ++ *rx8++ = (data >> shift) & 0xFF; ++ rxbv--; ++ shift -= 8; ++ spi->rx_todo--; ++ spi->rx++; ++ } ++ } else { ++ data = lantiq_spi_readl(spi, SPI_RB); ++ rx32 = (u32 *) spi->rx; ++ ++ *rx32++ = data; ++ spi->rx_todo -= 4; ++ spi->rx += 4; ++ } ++ rx_fill--; ++ } ++} ++ ++static void rx_request(struct lantiq_spi *spi) ++{ ++ unsigned int rxreq, rxreq_max; ++ ++ /* ++ * To avoid receive overflows at high clocks it is better to request ++ * only the amount of bytes that fits into all FIFOs. This value ++ * depends on the FIFO size implemented in hardware. ++ */ ++ rxreq = spi->rx_todo; ++ rxreq_max = rx_fifo_size(spi) * 4; ++ if (rxreq > rxreq_max) ++ rxreq = rxreq_max; ++ ++ lantiq_spi_writel(spi, rxreq, SPI_RXREQ); ++} ++ ++static irqreturn_t lantiq_spi_xmit_interrupt(int irq, void *data) ++{ ++ struct lantiq_spi *spi = data; ++ ++ /* handle possible interrupts after device initialization */ ++ if (!spi->rx && !spi->tx) ++ return IRQ_HANDLED; ++ ++ if (spi->tx) { ++ if (spi->rx && spi->rx_todo) ++ rx_fifo_read_full_duplex(spi); ++ ++ if (spi->tx_todo) ++ tx_fifo_write(spi); ++ else ++ goto completed; ++ } else if (spi->rx) { ++ if (spi->rx_todo) { ++ rx_fifo_read_half_duplex(spi); ++ ++ if (spi->rx_todo) ++ rx_request(spi); ++ else ++ goto completed; ++ } else ++ goto completed; ++ } ++ ++ return IRQ_HANDLED; ++ ++completed: ++ spi->status = 0; ++ complete(&spi->xfer_complete); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t lantiq_spi_err_interrupt(int irq, void *data) ++{ ++ struct lantiq_spi *spi = data; ++ u32 stat = lantiq_spi_readl(spi, SPI_STAT); ++ ++ if (stat & SPI_STAT_RUE) ++ dev_err(spi->dev, "receive underflow error\n"); ++ if (stat & SPI_STAT_TUE) ++ dev_err(spi->dev, "transmit underflow error\n"); ++ if (stat & SPI_STAT_RE) ++ dev_err(spi->dev, "receive overflow error\n"); ++ if (stat & SPI_STAT_TE) ++ dev_err(spi->dev, "transmit overflow error\n"); ++ if (stat & SPI_STAT_ME) ++ dev_err(spi->dev, "mode error\n"); ++ ++ /* Disable all interrupts */ ++ lantiq_spi_writel(spi, 0, SPI_IRNEN); ++ ++ /* Clear error flags */ ++ lantiq_spi_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); ++ ++ /* flush FIFOs */ ++ rx_fifo_flush(spi); ++ tx_fifo_flush(spi); ++ ++ /* set bad status so it can be retried */ ++ spi->status = -EIO; ++ complete(&spi->xfer_complete); ++ ++ return IRQ_HANDLED; ++} ++ ++static int transfer_start(struct lantiq_spi *spi, struct spi_device *spidev, ++ struct spi_transfer *t) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&spi->lock, flags); ++ ++ spi->tx = t->tx_buf; ++ spi->rx = t->rx_buf; ++ spi->status = -EINPROGRESS; ++ ++ if (t->tx_buf) { ++ spi->tx_todo = t->len; ++ ++ /* initially fill TX FIFO */ ++ tx_fifo_write(spi); ++ } ++ ++ if (spi->rx) { ++ spi->rx_todo = t->len; ++ ++ /* start shift clock in RX-only mode */ ++ if (!spi->tx) ++ rx_request(spi); ++ } ++ ++ spin_unlock_irqrestore(&spi->lock, flags); ++ ++ return 0; ++} ++ ++static int transfer_wait_finished(struct lantiq_spi *spi) ++{ ++ unsigned long timeout; ++ ++ /* wait for completion by interrupt */ ++ timeout = wait_for_completion_timeout(&spi->xfer_complete, ++ msecs_to_jiffies(spi->timeout)); ++ if (!timeout) ++ return -EIO; ++ ++ /* make sure that HW is idle */ ++ timeout = jiffies + msecs_to_jiffies(spi->timeout); ++ do { ++ if (!hw_is_busy(spi)) ++ return 0; ++ ++ cond_resched(); ++ } while (!time_after_eq(jiffies, timeout)); ++ ++ /* flush FIFOs on timeout */ ++ rx_fifo_flush(spi); ++ tx_fifo_flush(spi); ++ ++ return -EIO; ++} ++ ++static int lantiq_spi_transfer_one_message(struct spi_master *master, ++ struct spi_message *msg) ++{ ++ struct lantiq_spi *spi = spi_master_get_devdata(master); ++ struct spi_device *spidev = msg->spi; ++ struct spi_transfer *t; ++ int status; ++ unsigned int cs_change = 1; ++ ++ hw_setup_message(spi, spidev); ++ ++ list_for_each_entry(t, &msg->transfers, transfer_list) { ++ reinit_completion(&spi->xfer_complete); ++ ++ hw_setup_transfer(spi, spidev, t); ++ ++ if (cs_change) ++ chipselect_enable(spidev); ++ cs_change = t->cs_change; ++ ++ status = transfer_start(spi, spidev, t); ++ if (status) { ++ dev_err(spi->dev, "failed to start transfer\n"); ++ goto done; ++ } ++ ++ status = transfer_wait_finished(spi); ++ if (status) { ++ dev_err(spi->dev, "transfer timeout\n"); ++ goto done; ++ } ++ ++ status = spi->status; ++ if (status) { ++ dev_err(spi->dev, "transfer failed\n"); ++ goto done; ++ } ++ ++ msg->actual_length += t->len; ++ ++ if (t->delay_usecs) ++ udelay(t->delay_usecs); ++ ++ if (cs_change) ++ chipselect_disable(spidev); ++ } ++ ++done: ++ msg->status = status; ++ ++ if (!(status == 0 && cs_change)) ++ chipselect_disable(spidev); ++ ++ spi_finalize_current_message(master); ++ hw_finish_message(spi); ++ ++ return status; ++} ++ ++static int lantiq_spi_prepare_transfer(struct spi_master *master) ++{ ++ struct lantiq_spi *spi = spi_master_get_devdata(master); ++ ++ pm_runtime_get_sync(spi->dev); ++ ++ return 0; ++} ++ ++static int lantiq_spi_unprepare_transfer(struct spi_master *master) ++{ ++ struct lantiq_spi *spi = spi_master_get_devdata(master); ++ ++ pm_runtime_put(spi->dev); ++ ++ return 0; ++} ++ ++static const struct lantiq_spi_hwcfg spi_xway = { ++ .num_chipselect = 3, ++ .irnen_r = SPI_IRNEN_R_XWAY, ++ .irnen_t = SPI_IRNEN_T_XWAY, ++}; ++ ++static const struct lantiq_spi_hwcfg spi_xrx = { ++ .num_chipselect = 6, ++ .irnen_r = SPI_IRNEN_R_XRX, ++ .irnen_t = SPI_IRNEN_T_XRX, ++}; ++ ++static const struct of_device_id lantiq_spi_match[] = { ++ { .compatible = "lantiq,spi-xway", .data = &spi_xway, }, /* DEPRECATED */ ++ { .compatible = "lantiq,ase-spi", .data = &spi_xway, }, ++ { .compatible = "lantiq,xrx100-spi", .data = &spi_xrx, }, ++ { .compatible = "lantiq,xrx200-spi", .data = &spi_xrx, }, ++ { .compatible = "lantiq,xrx330-spi", .data = &spi_xrx, }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, lantiq_spi_match); ++ ++static int lantiq_spi_probe(struct platform_device *pdev) ++{ ++ struct spi_master *master; ++ struct resource *res; ++ struct lantiq_spi *spi; ++ const struct lantiq_spi_hwcfg *hwcfg; ++ const struct of_device_id *match; ++ int err, rx_irq, tx_irq, err_irq; ++ ++ match = of_match_device(lantiq_spi_match, &pdev->dev); ++ if (!match) { ++ dev_err(&pdev->dev, "no device match\n"); ++ return -EINVAL; ++ } ++ hwcfg = match->data; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_err(&pdev->dev, "failed to get resources\n"); ++ return -ENXIO; ++ } ++ ++ rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME); ++ if (rx_irq < 0) { ++ dev_err(&pdev->dev, "failed to get %s\n", SPI_RX_IRQ_NAME); ++ return -ENXIO; ++ } ++ ++ tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME); ++ if (tx_irq < 0) { ++ dev_err(&pdev->dev, "failed to get %s\n", SPI_TX_IRQ_NAME); ++ return -ENXIO; ++ } ++ ++ err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME); ++ if (err_irq < 0) { ++ dev_err(&pdev->dev, "failed to get %s\n", SPI_ERR_IRQ_NAME); ++ return -ENXIO; ++ } ++ ++ master = spi_alloc_master(&pdev->dev, sizeof(struct lantiq_spi)); ++ if (!master) ++ return -ENOMEM; ++ ++ spi = spi_master_get_devdata(master); ++ spi->master = master; ++ spi->dev = &pdev->dev; ++ spi->hwcfg = hwcfg; ++ platform_set_drvdata(pdev, spi); ++ ++ spi->regbase = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(spi->regbase)) { ++ err = PTR_ERR(spi->regbase); ++ goto err_master_put; ++ } ++ ++ err = devm_request_irq(&pdev->dev, rx_irq, lantiq_spi_xmit_interrupt, 0, ++ SPI_RX_IRQ_NAME, spi); ++ if (err) ++ goto err_master_put; ++ ++ err = devm_request_irq(&pdev->dev, tx_irq, lantiq_spi_xmit_interrupt, 0, ++ SPI_TX_IRQ_NAME, spi); ++ if (err) ++ goto err_master_put; ++ ++ err = devm_request_irq(&pdev->dev, err_irq, lantiq_spi_err_interrupt, 0, ++ SPI_ERR_IRQ_NAME, spi); ++ if (err) ++ goto err_master_put; ++ ++ spi->spi_clk = clk_get(&pdev->dev, NULL); ++ if (IS_ERR(spi->spi_clk)) { ++ err = PTR_ERR(spi->spi_clk); ++ goto err_master_put; ++ } ++ clk_prepare_enable(spi->spi_clk); ++ ++ spi->fpi_clk = clk_get_fpi(); ++ if (IS_ERR(spi->fpi_clk)) { ++ err = PTR_ERR(spi->fpi_clk); ++ goto err_clk_disable; ++ } ++ ++ init_completion(&spi->xfer_complete); ++ spin_lock_init(&spi->lock); ++ spi->timeout = 2000; ++ spi->cs_delay = 100; ++ spi->bits_per_word = 8; ++ spi->speed_hz = 0; ++ ++ master->dev.of_node = pdev->dev.of_node; ++ master->bus_num = 0; ++ master->num_chipselect = hwcfg->num_chipselect; ++ master->setup = lantiq_spi_setup; ++ master->cleanup = lantiq_spi_cleanup; ++ master->prepare_transfer_hardware = lantiq_spi_prepare_transfer; ++ master->transfer_one_message = lantiq_spi_transfer_one_message; ++ master->unprepare_transfer_hardware = lantiq_spi_unprepare_transfer; ++ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH | ++ SPI_LOOP; ++ ++ lantiq_spi_hw_init(spi); ++ ++ err = spi_register_master(master); ++ if (err) { ++ dev_err(&pdev->dev, "failed to register spi_master\n"); ++ goto err_clk_put; ++ } ++ ++ dev_info(&pdev->dev, ++ "Lantiq SPI controller (TXFS %u, RXFS %u, DMA %u)\n", ++ tx_fifo_size(spi), rx_fifo_size(spi), supports_dma(spi)); ++ ++ return 0; ++ ++err_clk_put: ++ clk_put(spi->fpi_clk); ++err_clk_disable: ++ clk_disable_unprepare(spi->spi_clk); ++ clk_put(spi->spi_clk); ++err_master_put: ++ platform_set_drvdata(pdev, NULL); ++ spi_master_put(master); ++ ++ return err; ++} ++ ++static int lantiq_spi_remove(struct platform_device *pdev) ++{ ++ struct lantiq_spi *spi = platform_get_drvdata(pdev); ++ struct spi_master *master = spi->master; ++ ++ spi_unregister_master(master); ++ ++ lantiq_spi_writel(spi, 0, SPI_IRNEN); ++ rx_fifo_flush(spi); ++ tx_fifo_flush(spi); ++ hw_enter_config_mode(spi); ++ ++ clk_disable_unprepare(spi->spi_clk); ++ clk_put(spi->spi_clk); ++ clk_put(spi->fpi_clk); ++ ++ platform_set_drvdata(pdev, NULL); ++ spi_master_put(master); ++ ++ return 0; ++} ++ ++static struct platform_driver lantiq_spi_driver = { ++ .probe = lantiq_spi_probe, ++ .remove = lantiq_spi_remove, ++ .driver = { ++ .name = "spi-lantiq", ++ .owner = THIS_MODULE, ++ .of_match_table = lantiq_spi_match, ++ }, ++}; ++module_platform_driver(lantiq_spi_driver); ++ ++MODULE_DESCRIPTION("Lantiq SPI controller driver"); ++MODULE_AUTHOR("Daniel Schwierzeck "); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:spi-lantiq"); -- 2.25.1