From 580611cb0932143fc2d7a735cfa9ce1ef34d6002 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 10 Jun 2009 00:19:28 +0200 Subject: [PATCH] Prepare 2009.06-rc3 Update CHANGELOG Signed-off-by: Wolfgang Denk --- CHANGELOG | 573 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ Makefile | 2 +- 2 files changed, 574 insertions(+), 1 deletion(-) diff --git a/CHANGELOG b/CHANGELOG index 813c0d9f2d..ba0c02a383 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,576 @@ +commit 3a76ab5c166d5956885f803ce975e7151cc0ca0e +Author: Wolfgang Denk +Date: Wed Jun 10 00:15:11 2009 +0200 + + rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared + + Signed-off-by: Wolfgang Denk + +commit 165f9859b64ff59f0cfae3cc70a7e7ded7aaa4a7 +Author: Daniel Mack +Date: Thu Jun 4 19:44:12 2009 +0200 + + ubifs: fix small error path mismatch + + In do_readpage(), don't free 'dn' if its allocation failed. + + Signed-off-by: Daniel Mack + +commit de7cf709ebd3c01fbd094e8853dabb410c0370a1 +Author: Wolfgang Denk +Date: Thu Jun 4 00:31:07 2009 +0200 + + EP88x: fix broken linker script + + Signed-off-by: Wolfgang Denk + Tested-by: Mikhail Zaturenskiy + +commit 7a2063bd80d3b58b2dd5d5e58f4411f8d250576c +Author: Wolfgang Denk +Date: Fri May 15 00:16:02 2009 +0200 + + TQM85xx: minor config file cleanup + + Remove "saveenv" from "update" definition: the environment is outside + the U-Boot image on TQM85xx and therefor not affected by updates. + + Also "beautify" code a bit (vertical alignment). + + Signed-off-by: Wolfgang Denk + +commit c0296b1801fc9426d772fa75fe58458db605dfee +Author: Wolfgang Denk +Date: Fri May 15 00:16:01 2009 +0200 + + TQM85xx: adapt for new flash types + + Old TQM85xx boards had 'M' type Spansion Flashes from the S29GLxxxM + series while new boards have 'N' type Flashes from the S29GLxxxN + series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB. + + We now change the configuration to the new flash types for all + boards; this also works on old boards - we just waste two flash + sectors for the environment which could be smaller there. + + Signed-off-by: Wolfgang Denk + +commit 6735104924f06340071a6914a9ee3345607fc102 +Author: Dave Liu +Date: Mon May 18 17:49:23 2009 +0800 + + 85xx: Fix the wrong SYS_CLK_IN for 8569MDS + + The SYS_CLK_IN of MPC8569MDS is 66.66MHz, + The DDR_CLK_IN is same with SYS_CLK_IN in 8569 processor. + so, change the SYS_CLK_IN from 66MHz to 66.66MHz. + + Signed-off-by: Dave Liu + +commit 16e7559c08b6f29db4596d795b92914c01e6a1b3 +Author: Dave Liu +Date: Fri May 15 10:27:44 2009 +0800 + + 85xx: Fix the wrong BCSR address of 8569MDS + + The BCSR17[7] = 1 will unlock the write protect of FLASH. + The WP# pin only controls the write protect of top/bottom sector, + That is why we can save env, but we can't write the first sector + before the patch. + + Signed-off-by: Dave Liu + +commit 90d13b8ac3d515349626d7c8a3dc34ef38c43fa6 +Author: Fredrik Arnerup +Date: Tue Jun 2 16:27:10 2009 -0500 + + 85xx: bugfix for reading maximum TLB size on mpc85xx + + The MAXSIZE field in the TLB1CFG register is 4 bits, not 8 bits. + This made setup_ddr_tlbs() try to set up a TLB larger than the e500 maximum + (256 MB) + which made u-boot hang in board_init_f() when trying to create a new stack + in RAM. + I have an mpc8540 with one 1GB dimm. + + Signed-off-by: Fredrik Arnerup + Signed-off-by: Andy Fleming + Acked-by: Kumar Gala + +commit 1b5291dddf5f16c7ae10e3cb165882fa96038b26 +Author: Dave Liu +Date: Fri Mar 27 14:32:43 2009 +0800 + + 85xx: Fix the clock adjust of mpc8569mds board + + Currently the clk_adj is 6 (3/4 cycle), The settings will cause + the DDR controller hang at the data init. Change the clk_adj + from 6 to 4 (1/2 cycle), make the memory system stable. + + Signed-off-by: Dave Liu + +commit faa14babd7466dfade358f9cac128ae246b9bf1b +Author: RONETIX - Ilko Iliev +Date: Fri Jun 5 16:54:31 2009 +0200 + + at91: fix a USB problem for AT91SAM9261 + + This patch corrects the missing PLLB initialization in usb_cpu_init() + for AT91SAM9261. + Because of the missing PLLB initialization, the USB support for all + AT91SAM9261 based boards will work only if the PLLB is configured by a + precedent bootloader. + + Signed-off-by: Ilko Iliev + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Remy Bohmer + +commit 0c24dec550ddb7d86b8bfdd8645b18479f73e6e2 +Author: Felix Radensky +Date: Sun May 31 20:44:15 2009 +0300 + + ppc4xx/net: Fix MDIO clock setup + + This patch fixes MDIO clock setup in case when OPB frequency is 100MHz. + Current code assumes that the value of sysinfo.freqOPB is 100000000 + when OPB frequency is 100MHz. In reality it is 100000001. As a result + MDIO clock is set to incorrect value, larger than 2.5MHz, thus violating + the standard. This in not a problem on boards equipped with Marvell PHYs + (e.g. Canyonlands), since those PHYs support MDIO clocks up to 8.3MHz, + but can be a problem for other PHYs (e.g. Realtek ones). + + Signed-off-by: Felix Radensky + Signed-off-by: Ben Warren + +commit d65e34d12514de2bbe3b8f519761d641c081bad0 +Author: Yoshihiro Shimoda +Date: Wed Feb 25 14:27:29 2009 +0900 + + rtl8169: fix PCI system memory address + + When PCI device use system memory, some PCI host controller should be + set physical memory address. + + Signed-off-by: Yoshihiro Shimoda + Signed-off-by: Ben Warren + +commit ca9c8a1e10fac01e6a1129f82a7ce18bd818fa43 +Author: Manikandan Pillai +Date: Wed Apr 8 09:14:35 2009 +0530 + + SMC911x driver fixed for NFS boot + + eth_halt() function in the smc911x drivers used to call the + smc911x_reset() function. eth_halt() used to be called after + tftp transfers. This used to put the ethernet chip in reset + while the linux boots up resulting in the ethernet driver + not coming up. NFS boot used to fail as a result. + + This patch calls smc911x_shutdown() instead of smc911x_reset(). + Some comments received has also been fixed. + + Signed-off-by: Manikandan Pillai + Signed-off-by: Ben Warren + +commit e5a3bc2401a23f1890611f020f57f94824a534db +Author: Remy Bohmer +Date: Sun May 3 12:11:40 2009 +0200 + + Add config option for disabling DM9000-SROM support. + + Some boards do not have SROM support for the DM9000 network adapter. + Instead of listing these board names in the driver code, make this + option configurable from the board config file. + + It also removes a build warning for the at91sam9261ek board: + 'dm9000x.c:545: warning: 'read_srom_word' defined but not used' + + And it repaires the trizepsiv board build which was broken around the + same routines + + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit 2c0234fa79122a5aa77c4e17c33eb2fe184b61a7 +Author: Daniel Mack +Date: Wed Apr 8 13:23:37 2009 +0200 + + smc911x: write back the manually set MAC address + + If the MAX address is given by the environment, write it back to the + hardware. + + Signed-off-by: Daniel Mack + Cc: Sascha Hauer + Signed-off-by: Ben Warren + +commit dfcd7f21607fd847236b04bb1a8d59a7c10ab99c +Author: Wolfgang Denk +Date: Fri May 15 00:16:03 2009 +0200 + + Redundant Environment: protect full sector size + + Several boards used different ways to specify the size of the + protected area when enabling flash write protection for the sectors + holding the environment variables: some used CONFIG_ENV_SIZE and + CONFIG_ENV_SIZE_REDUND, some used CONFIG_ENV_SECT_SIZE, and some even + a mix of both for the "normal" and the "redundant" areas. + + Normally, this makes no difference at all. However, things are + different when you have to deal with boards that can come with + different types of flash chips, which may have different sector + sizes. + + Here we may have to chose CONFIG_ENV_SECT_SIZE such that it fits the + biggest sector size, which may include several sectors on boards using + the smaller sector flash types. In such a case, using CONFIG_ENV_SIZE + or CONFIG_ENV_SIZE_REDUND to enable the protection may lead to the + case that only the first of these sectors get protected, while the + following ones aren't. + + This is no real problem, but it can be confusing for the user - + especially on boards that use CONFIG_ENV_SECT_SIZE to protect the + "normal" areas, while using CONFIG_ENV_SIZE_REDUND for the + "redundant" area. + + To avoid such inconsistencies, I changed all sucn boards that I found + to consistently use CONFIG_ENV_SECT_SIZE for protection. This should + not cause any functional changes to the code. + + Signed-off-by: Wolfgang Denk + Cc: Paul Ruhland + Cc: Pantelis Antoniou + Cc: Stefan Roese + Cc: Gary Jennejohn + Cc: Dave Ellis + Acked-by: Stefan Roese + +commit b81830f6e3b3e6ed114d071eb107965e49fa9b5a +Author: Ilya Yanok +Date: Thu May 14 14:03:09 2009 +0400 + + mmc: it's safe to ignore mmc_send_if_cond() return value + + Return value of mmc_send_if_cond() can be safely ignored (as it is + done in Linux). This makes older cards work with MXC MCI controller. + + Signed-off-by: Ilya Yanok + +commit dba6fcf6517faa5dda7df8109febe03c9c72a6f5 +Author: Stefan Roese +Date: Mon May 11 15:54:13 2009 +0200 + + cfi_mtd: Fix bug in last sector detection + + This patch now enabled this cfi-mtd wrapper to correctly detect and + erase the last sector in an NOR FLASH device. + + Signed-off-by: Stefan Roese + +commit 4e3d89ba948eef801ffd46ef862cdede5b3f8320 +Author: Yauhen Kharuzhy +Date: Thu May 7 00:43:30 2009 +0300 + + mmc: Fix decoding of SCR & function switch data on little-endian machines + + SCR & switch data are read from card as big-endian words and should be + converted to CPU byte order. + + Signed-off-by: Yauhen Kharuzhy + Signed-off-by: Andy Fleming + +commit f33cb34b3971dabe3720d577b0e1b8601c09fe17 +Author: Yauhen Kharuzhy +Date: Thu May 7 13:08:53 2009 +0300 + + mmc: Remove return from mmc_init for non SD 2.0 compatible cards. + + Cards which are not compatible with SD 2.0 standard, may return response + for CMD8 command, but it will be invalid in terms of SD 2.0. We should + accept this case as admissible, just like Linux does. + + Signed-off-by: Yauhen Kharuzhy + Signed-off-by: Andy Fleming + +commit 998be3dd59ed0af4bec38324047fecfa88ac45db +Author: Rabin Vincent +Date: Sun Apr 5 13:30:56 2009 +0530 + + mmc: drop unnecessary casts + + Now that response is a uint, we can drop all the casts. + + Signed-off-by: Rabin Vincent + +commit 0b453ffe28bb9227d86ddbe0893bd19c93f04ed7 +Author: Rabin Vincent +Date: Sun Apr 5 13:30:55 2009 +0530 + + mmc: fix response decoding on little endian + + The mmc code defines the response as an array of chars. However, it + access the response bytes both as (i) an array of four uints (with + casts) and (ii) as individual chars. The former case is used more + often, including by the driver when it assigns the response. + + The char-wise accesses are broken on little endian systems because they + assume that the bytes in the uints are in big endian byte order. + + This patch fixes this by changing the response to be an array of four + uints and replacing the char-wise accesses with equivalent uint-wise + accesses. + + Signed-off-by: Rabin Vincent + +commit 9b1f942c09dd942e6de3185caa81c111b14de567 +Author: Rabin Vincent +Date: Sun Apr 5 13:30:54 2009 +0530 + + mmc: use lldiv to fix arm eabi build + + The generic MMC core uses direct long long divisions, which do not build + with ARM EABI toolchains. Use lldiv() instead, which works everywhere. + + Signed-off-by: Rabin Vincent + +commit e85649c7e683faea1ccfddc9fa9abc62f38e4201 +Author: Rabin Vincent +Date: Sun Apr 5 13:30:53 2009 +0530 + + mmc: check find_mmc_device return value + + find_mmc_device returns NULL if an invalid device number is specified. + Check for this to avoid dereferencing NULL pointers. + + Signed-off-by: Rabin Vincent + +commit ac0865ff33870cdf2cd480165045e1bc311e9fa2 +Author: Rabin Vincent +Date: Sun Apr 5 13:30:52 2009 +0530 + + mmc: clean up help texts + + Remove some repeated words and superfluous newlines in the mmc command + help entries. + + Signed-off-by: Rabin Vincent + +commit 7d6900ebe16d679c0e03f8d1584b64057a64ce39 +Author: Mike Frysinger +Date: Fri May 29 17:01:48 2009 -0400 + + Blackfin: spi: fix pin handling of SPI0 SSEL4 + + CS4 on SPI0 has a dedicated PH8 pin which needs to be enabled as a + peripheral in order to work. + + Signed-off-by: Mike Frysinger + +commit 2157359dad2533987f5eb0181ef543693fad6a33 +Author: Mike Frysinger +Date: Tue May 26 02:51:57 2009 -0400 + + Blackfin: fix if() logic in bootrom evt1 check + + A missing set of parenthesis caused the silicon revision to apply only to + the BF533 and not the BF531/BF532 variants. + + Signed-off-by: Mike Frysinger + +commit 76b5883da2cf049cd410901c04ea450e5f5c27c3 +Author: Stefan Roese +Date: Sat May 16 12:04:22 2009 +0200 + + jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together + + Currently using JFFS2 with MTDPARTS enabled doesn't work. This is because + mtdparts_init() is available in both files, cmd_mtdparts.c and + cmd_jffs2.c. Please note that in the original cmd_jffs2.c file (before + the jffs2/mtdparts command/file split those 2 different versions + already existed. So this is nothing new. The main problem is that the + variables "current_dev" and "current_partnum" are declared in both + files now. This doesn't work. + + This patch now changes the names of those variable to more specific + names: "current_mtd_dev" and "current_mtd_partnum". This is because + this patch also changes the declaration from static to global, so + that they can be used from both files. + + Please note that my first tests were not successful. The MTD devices + selected via mtdparts are now accessed but I'm failing to see the + directory listed via the "ls" command. Nothing is displayed. Perhaps + I didn't generate the JFFS2 image correctly (I never used JFFS2 in + U-Boot before). Not sure. Perhaps somebody else could take a look at + this as well. I'll continue looking into this on Monday. + + Signed-off-by: Stefan Roese + Cc: Wolfgang Denk + Cc: Detlev Zundel + Cc: Ilya Yanok + Cc: Renaud barbier + +commit ab687907980fa28940a1a992d3f1c5d17cdbbf5d +Author: Graf Yang +Date: Sun May 24 02:34:34 2009 -0400 + + Blackfin: bf518f-ezbrd: setup portmux for async flash + + The pins for async memory where parallel flash lives are not enabled by + default, so make sure we mux them as needed. + + Signed-off-by: Graf Yang + Signed-off-by: Mike Frysinger + +commit f40f6db278f602b55820693634a7256b0b4e4b80 +Author: Stefan Roese +Date: Wed May 20 10:58:03 2009 +0200 + + nand: Fix problem with ECC ordering for PPC4xx NDFC platforms + + This patch enables Smart Media (SMC) ECC byte ordering which is used + on the PPC4xx NAND FLASH controller (NDFC). Without this patch we have + incompatible ECC byte ordering to the Linux kernel NDFC driver. + + Signed-off-by: Stefan Roese + Acked-by: Scott Wood + +commit 399aab7748bef053d59612211e1bd7a3fabfce18 +Author: Stefan Roese +Date: Wed May 20 10:58:02 2009 +0200 + + ppc4xx: Fix problem with ECC ordering for PPC4xx NDFC platforms + + This patch now uses the correct ECC byte order (Smart Media - SMC) + to be used on the 4xx NAND FLASH driver. Without this patch we have + incompatible ECC byte ordering to the Linux kernel NDFC driver. + + Please note that we also have to enable CONFIG_MTD_NAND_ECC_SMC in + drivers/mtd/nand/nand_ecc.c for correct operation. This is done with + a seperate patch. + + Signed-off-by: Stefan Roese + Acked-by: Scott Wood + +commit 5d841fac8249a2b3f9a814da2140132be0a9f60d +Author: Stefan Roese +Date: Wed May 20 10:58:01 2009 +0200 + + ppc4xx: Move definition for PPC4xx NAND FLASH controller to header + + This patch moves the definition for the PPC4xx NAND FLASH controller + (NDFC) CONFIG_NAND_NDFC into include/ppc4xx.h. This is needed for the + upcoming fix for the ECC byte ordering of the NDFC driver. + + Signed-off-by: Stefan Roese + Acked-by: Scott Wood + +commit 2df72b82bc9e17b88dc82735a067749220beb025 +Author: Kim Phillips +Date: Tue May 19 12:53:36 2009 -0500 + + common: fix inline--weak error spotted by gcc 4.4 + + cmd_ide.c:547: error: inline function 'ide_inb' cannot be declared weak + + removing the inline attribute fixes it. + + Signed-off-by: Kim Phillips + +commit 9fd9abedcc3c10cf89353265cbe05f58609d51f3 +Author: Kim Phillips +Date: Tue May 19 12:53:32 2009 -0500 + + TQM834x: remove defines causing gcc4.4 warnings + + Configuring for TQM834x board... + cpu_init.c: In function 'cpu_init_f': + cpu_init.c:262: warning: array subscript is above array bounds + cpu_init.c:263: warning: array subscript is above array bounds + cpu_init.c:270: warning: array subscript is above array bounds + ... + + Signed-off-by: Kim Phillips + +commit 0850301747228a3327f2815a85284d26ade3de95 +Author: Andreas Huber +Date: Tue May 19 11:06:30 2009 +0200 + + UBI: fix return code in ubi_volume_read + + Return -ENODEV instead of 0 when trying to read from a non existing volume. + + Signed-off-by: Andreas Huber + Signed-off-by: Stefan Roese + +commit ec01481ddc4cf302c7f6d760b776ca94819ec21e +Author: Graf Yang +Date: Tue May 19 04:40:08 2009 -0400 + + Blackfin: fix timer_init()/timer_reset() + + The timer_init() function was not using the right csync instruction, nor + was it doing it right after disabling the core timer. + + The timer_reset() function would reset the timestamp, but not the actual + timer, so there was a common edge case where get_timer() return a jump of + one timestamp (couple milliseconds) right after resetting. This caused + many functions to improperly timeout right away. + + Signed-off-by: Graf Yang + Signed-off-by: Mike Frysinger + +commit c06326c73bf90e48a8e1cf8893ad31c575423f50 +Author: Shinya Kuribayashi +Date: Sat May 16 09:12:09 2009 +0900 + + MIPS: lib_mips/board.c: Remove unused variables + + This fixes the following build warnings: + + board.c: In function 'board_init_r': + board.c:328: warning: unused variable 'i' + board.c:326: warning: unused variable 'e' + + Signed-off-by: Shinya Kuribayashi + +commit 47f6a36cc3f3427cc8e4f1d0f3e6678be6f33769 +Author: Shinya Kuribayashi +Date: Sat May 16 09:12:09 2009 +0900 + + MIPS: Make all extern-ed functions in bitops.h static + + All these functions are expected to be static inline-ed. + This patch also fixes the following build warnings on MIPS targets: + + include/asm/bitops.h: In function 'ext2_find_next_zero_bit': + include/asm/bitops.h:862: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static + include/asm/bitops.h:885: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static + include/asm/bitops.h:887: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static + + Signed-off-by: Shinya Kuribayashi + +commit 87423d740b91329b8d1d0b73cafd6930993b558a +Author: Thomas Lange +Date: Fri Apr 24 16:22:16 2009 +0200 + + MIPS: Implement ethernet halt for au1x00 + + Implement ethernet halt() by putting MAC0 in reset. + If we do not do this, we will get memory corruption + when ethernet frames are received during early OS boot. + + Signed-off-by: Thomas Lange + Signed-off-by: Shinya Kuribayashi + +commit a2e0ffcf2d9a22c582a93e84a4bef20fd3877f47 +Author: Wolfgang Denk +Date: Fri May 15 23:29:23 2009 +0200 + + Prepare v2009.06-rc2 + + Update CHANGELOG. + + Signed-off-by: Wolfgang Denk + commit f4317ea91942f44cc1c433277927b61618e9b0a5 Author: Daniel Mack Date: Tue May 5 12:48:29 2009 +0200 diff --git a/Makefile b/Makefile index 24e6410ebe..4983c0e71b 100644 --- a/Makefile +++ b/Makefile @@ -24,7 +24,7 @@ VERSION = 2009 PATCHLEVEL = 06 SUBLEVEL = -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else -- 2.25.1