From 54f17fa05d453618afabff1246c1a16cea304b1b Mon Sep 17 00:00:00 2001 From: Kever Yang Date: Mon, 22 Jul 2019 20:02:01 +0800 Subject: [PATCH] rockchip: add common board file for U-Boot proper Add common board file for Rockchip SoCs to avoid too much copy-paste work for different SoCs. This board file in charge for common board_init() and board_late_init() in U-Boot proper. Signed-off-by: Kever Yang --- arch/arm/mach-rockchip/Kconfig | 7 +++ arch/arm/mach-rockchip/Makefile | 1 + arch/arm/mach-rockchip/board.c | 104 ++++++++++++++++++++++++++++++++ 3 files changed, 112 insertions(+) create mode 100644 arch/arm/mach-rockchip/board.c diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 81dee9e5c7..4d983f8fce 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -229,6 +229,13 @@ config TPL_ROCKCHIP_BACK_TO_BROM SPL will return to the boot rom, which will then load the U-Boot binary to keep going on. +config ROCKCHIP_COMMON_BOARD + bool "Rockchip common board file" + help + Rockchip SoCs have similar boot process, Common board file is mainly + in charge of common process of board_init() and board_late_init() for + U-Boot proper. + config SPL_ROCKCHIP_COMMON_BOARD bool "Rockchip SPL common board file" depends on SPL diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 5cb2c6dcc9..7d2a227794 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -20,6 +20,7 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) # we can have the preprocessor correctly recognise both 0x0 and 0 # meaning "turn it off". obj-y += boot_mode.o +obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128-board.o diff --git a/arch/arm/mach-rockchip/board.c b/arch/arm/mach-rockchip/board.c new file mode 100644 index 0000000000..b2a88e789d --- /dev/null +++ b/arch/arm/mach-rockchip/board.c @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +__weak int rk_board_late_init(void) +{ + return 0; +} + +int board_late_init(void) +{ + setup_boot_mode(); + + return rk_board_late_init(); +} + +int board_init(void) +{ + int ret; + +#ifdef CONFIG_DM_REGULATOR + ret = regulators_enable_boot_on(false); + if (ret) + debug("%s: Cannot enable boot on regulator\n", __func__); +#endif + + return 0; +} + +#if !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_ARM64) +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif + +#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG) +#include +#include + +static struct dwc2_plat_otg_data otg_data = { + .rx_fifo_sz = 512, + .np_tx_fifo_sz = 16, + .tx_fifo_sz = 128, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + int node; + const char *mode; + bool matched = false; + const void *blob = gd->fdt_blob; + + /* find the usb_otg node */ + node = fdt_node_offset_by_compatible(blob, -1, "snps,dwc2"); + + while (node > 0) { + mode = fdt_getprop(blob, node, "dr_mode", NULL); + if (mode && strcmp(mode, "otg") == 0) { + matched = true; + break; + } + + node = fdt_node_offset_by_compatible(blob, node, "snps,dwc2"); + } + if (!matched) { + debug("Not found usb_otg device\n"); + return -ENODEV; + } + otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); + + return dwc2_udc_probe(&otg_data); +} + +int board_usb_cleanup(int index, enum usb_init_type init) +{ + return 0; +} +#endif + +#if CONFIG_IS_ENABLED(FASTBOOT) +int fastboot_set_reboot_flag(void) +{ + printf("Setting reboot to fastboot flag ...\n"); + /* Set boot mode to fastboot */ + writel(BOOT_FASTBOOT, CONFIG_ROCKCHIP_BOOT_MODE_REG); + + return 0; +} +#endif -- 2.25.1