From 548cf52fd5be1a490807c2f8e5f218c9fbd4053a Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Fri, 20 Mar 2015 19:28:29 -0700 Subject: [PATCH] freescale/qixis: Add support for booting from NAND Use "qixis_reset nand" to reset the board to boot from NAND. Signed-off-by: Scott Wood Signed-off-by: York Sun --- board/freescale/common/qixis.c | 31 +++++++++++++++++++++---------- 1 file changed, 21 insertions(+), 10 deletions(-) diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index a49e3006d9..9f6b0e7f31 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -138,24 +138,23 @@ void qixis_bank_reset(void) QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START); } -/* Set the boot bank to the power-on default bank */ -void clear_altbank(void) +static void __maybe_unused set_lbmap(int lbmap) { u8 reg; reg = QIXIS_READ(brdcfg[0]); - reg = (reg & ~QIXIS_LBMAP_MASK) | QIXIS_LBMAP_DFLTBANK; + reg = (reg & ~QIXIS_LBMAP_MASK) | lbmap; QIXIS_WRITE(brdcfg[0], reg); } -/* Set the boot bank to the alternate bank */ -void set_altbank(void) +static void __maybe_unused set_rcw_src(int rcw_src) { u8 reg; - reg = QIXIS_READ(brdcfg[0]); - reg = (reg & ~QIXIS_LBMAP_MASK) | QIXIS_LBMAP_ALTBANK; - QIXIS_WRITE(brdcfg[0], reg); + reg = QIXIS_READ(dutcfg[1]); + reg = (reg & ~1) | (rcw_src & 1); + QIXIS_WRITE(dutcfg[1], reg); + QIXIS_WRITE(dutcfg[0], (rcw_src >> 1) & 0xff); } static void qixis_dump_regs(void) @@ -201,11 +200,22 @@ int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int i; if (argc <= 1) { - clear_altbank(); + set_lbmap(QIXIS_LBMAP_DFLTBANK); qixis_reset(); } else if (strcmp(argv[1], "altbank") == 0) { - set_altbank(); + set_lbmap(QIXIS_LBMAP_ALTBANK); qixis_bank_reset(); + } else if (strcmp(argv[1], "nand") == 0) { +#ifdef QIXIS_LBMAP_NAND + QIXIS_WRITE(rst_ctl, 0x30); + QIXIS_WRITE(rcfg_ctl, 0); + set_lbmap(QIXIS_LBMAP_NAND); + set_rcw_src(QIXIS_RCW_SRC_NAND); + QIXIS_WRITE(rcfg_ctl, 0x20); + QIXIS_WRITE(rcfg_ctl, 0x21); +#else + printf("Not implemented\n"); +#endif } else if (strcmp(argv[1], "watchdog") == 0) { static char *period[9] = {"2s", "4s", "8s", "16s", "32s", "1min", "2min", "4min", "8min"}; @@ -244,6 +254,7 @@ U_BOOT_CMD( "Reset the board using the FPGA sequencer", "- hard reset to default bank\n" "qixis_reset altbank - reset to alternate bank\n" + "qixis_reset nand - reset to nand\n" "qixis watchdog - set the watchdog period\n" " period: 1s 2s 4s 8s 16s 32s 1min 2min 4min 8min\n" "qixis_reset dump - display the QIXIS registers\n" -- 2.25.1