From 53e3db7f64a8e4289bc8accb87c2ec7fa546010a Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 31 Dec 2014 11:01:36 +0800 Subject: [PATCH] QuadSPI: use QSPI_CMD_xx instead of flash opcodes Use QSPI_CMD_xx instead of flash opcodes Signed-off-by: Peng Fan Reviewed-by: Jagannadha Sutradharudu Teki --- drivers/spi/fsl_qspi.c | 64 ++++++++++++++++++++++-------------------- 1 file changed, 33 insertions(+), 31 deletions(-) diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c index ba20beff4f..61490c9d01 100644 --- a/drivers/spi/fsl_qspi.c +++ b/drivers/spi/fsl_qspi.c @@ -29,19 +29,19 @@ #define SEQID_PP 6 #define SEQID_RDID 7 -/* Flash opcodes */ -#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ -#define OPCODE_RDSR 0x05 /* Read status register */ -#define OPCODE_WREN 0x06 /* Write enable */ -#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ -#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */ -#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ -#define OPCODE_RDID 0x9f /* Read JEDEC ID */ - -/* 4-byte address opcodes - used on Spansion and some Macronix flashes */ -#define OPCODE_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */ -#define OPCODE_PP_4B 0x12 /* Page program (up to 256 bytes) */ -#define OPCODE_SE_4B 0xdc /* Sector erase (usually 64KiB) */ +/* QSPI CMD */ +#define QSPI_CMD_PP 0x02 /* Page program (up to 256 bytes) */ +#define QSPI_CMD_RDSR 0x05 /* Read status register */ +#define QSPI_CMD_WREN 0x06 /* Write enable */ +#define QSPI_CMD_FAST_READ 0x0b /* Read data bytes (high frequency) */ +#define QSPI_CMD_CHIP_ERASE 0xc7 /* Erase whole flash chip */ +#define QSPI_CMD_SE 0xd8 /* Sector erase (usually 64KiB) */ +#define QSPI_CMD_RDID 0x9f /* Read JEDEC ID */ + +/* 4-byte address QSPI CMD - used on Spansion and some Macronix flashes */ +#define QSPI_CMD_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */ +#define QSPI_CMD_PP_4B 0x12 /* Page program (up to 256 bytes) */ +#define QSPI_CMD_SE_4B 0xdc /* Sector erase (usually 64KiB) */ #ifdef CONFIG_SYS_FSL_QSPI_LE #define qspi_read32 in_le32 @@ -94,7 +94,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi) /* Write Enable */ lut_base = SEQID_WREN * 4; - qspi_write32(®s->lut[lut_base], OPRND0(OPCODE_WREN) | + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_WREN) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD)); qspi_write32(®s->lut[lut_base + 1], 0); qspi_write32(®s->lut[lut_base + 2], 0); @@ -103,13 +103,15 @@ static void qspi_set_lut(struct fsl_qspi *qspi) /* Fast Read */ lut_base = SEQID_FAST_READ * 4; if (FSL_QSPI_FLASH_SIZE <= SZ_16M) - qspi_write32(®s->lut[lut_base], OPRND0(OPCODE_FAST_READ) | + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_FAST_READ) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); else - qspi_write32(®s->lut[lut_base], OPRND0(OPCODE_FAST_READ_4B) | - PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) | - PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); + qspi_write32(®s->lut[lut_base], + OPRND0(QSPI_CMD_FAST_READ_4B) | + PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | + OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) | + INSTR1(LUT_ADDR)); qspi_write32(®s->lut[lut_base + 1], OPRND0(8) | PAD0(LUT_PAD1) | INSTR0(LUT_DUMMY) | OPRND1(RX_BUFFER_SIZE) | PAD1(LUT_PAD1) | INSTR1(LUT_READ)); @@ -118,7 +120,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi) /* Read Status */ lut_base = SEQID_RDSR * 4; - qspi_write32(®s->lut[lut_base], OPRND0(OPCODE_RDSR) | + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_RDSR) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) | PAD1(LUT_PAD1) | INSTR1(LUT_READ)); qspi_write32(®s->lut[lut_base + 1], 0); @@ -128,11 +130,11 @@ static void qspi_set_lut(struct fsl_qspi *qspi) /* Erase a sector */ lut_base = SEQID_SE * 4; if (FSL_QSPI_FLASH_SIZE <= SZ_16M) - qspi_write32(®s->lut[lut_base], OPRND0(OPCODE_SE) | + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_SE) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); else - qspi_write32(®s->lut[lut_base], OPRND0(OPCODE_SE_4B) | + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_SE_4B) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); qspi_write32(®s->lut[lut_base + 1], 0); @@ -141,7 +143,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi) /* Erase the whole chip */ lut_base = SEQID_CHIP_ERASE * 4; - qspi_write32(®s->lut[lut_base], OPRND0(OPCODE_CHIP_ERASE) | + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_CHIP_ERASE) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD)); qspi_write32(®s->lut[lut_base + 1], 0); qspi_write32(®s->lut[lut_base + 2], 0); @@ -150,11 +152,11 @@ static void qspi_set_lut(struct fsl_qspi *qspi) /* Page Program */ lut_base = SEQID_PP * 4; if (FSL_QSPI_FLASH_SIZE <= SZ_16M) - qspi_write32(®s->lut[lut_base], OPRND0(OPCODE_PP) | + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_PP) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); else - qspi_write32(®s->lut[lut_base], OPRND0(OPCODE_PP_4B) | + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_PP_4B) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); qspi_write32(®s->lut[lut_base + 1], OPRND0(TX_BUFFER_SIZE) | @@ -164,7 +166,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi) /* READ ID */ lut_base = SEQID_RDID * 4; - qspi_write32(®s->lut[lut_base], OPRND0(OPCODE_RDID) | + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_RDID) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(8) | PAD1(LUT_PAD1) | INSTR1(LUT_READ)); qspi_write32(®s->lut[lut_base + 1], 0); @@ -454,22 +456,22 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, return 0; } - if (qspi->cur_seqid == OPCODE_FAST_READ) { + if (qspi->cur_seqid == QSPI_CMD_FAST_READ) { qspi->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK; - } else if (qspi->cur_seqid == OPCODE_SE) { + } else if (qspi->cur_seqid == QSPI_CMD_SE) { qspi->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK; qspi_op_se(qspi); - } else if (qspi->cur_seqid == OPCODE_PP) { + } else if (qspi->cur_seqid == QSPI_CMD_PP) { pp_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK; } } if (din) { - if (qspi->cur_seqid == OPCODE_FAST_READ) + if (qspi->cur_seqid == QSPI_CMD_FAST_READ) qspi_op_read(qspi, din, bytes); - else if (qspi->cur_seqid == OPCODE_RDID) + else if (qspi->cur_seqid == QSPI_CMD_RDID) qspi_op_rdid(qspi, din, bytes); - else if (qspi->cur_seqid == OPCODE_RDSR) + else if (qspi->cur_seqid == QSPI_CMD_RDSR) qspi_op_rdsr(qspi, din); } -- 2.25.1