From 535800d33f41b25a265945d12280ef20038a6aaa Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Tue, 9 Apr 2019 17:24:15 +0200 Subject: [PATCH] colibri-imx6ull: migrate mmc to using driver model Migrate MMC to using driver model. Migrate USDHC to using pinctrl. While at it also add GPIO1_IO03__OSC32K_32K_OUT pin muxing. While at it also update copyright period. Signed-off-by: Marcel Ziswiler Reviewed-by: Igor Opaniuk --- arch/arm/dts/imx6ull-colibri.dts | 15 +++- .../toradex/colibri-imx6ull/colibri-imx6ull.c | 70 ------------------- configs/colibri-imx6ull_defconfig | 1 + include/configs/colibri-imx6ull.h | 6 +- 4 files changed, 17 insertions(+), 75 deletions(-) diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts index 95c67be438..0d416ebd10 100644 --- a/arch/arm/dts/imx6ull-colibri.dts +++ b/arch/arm/dts/imx6ull-colibri.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright 2018 Toradex AG + * Copyright 2018-2019 Toradex AG */ /dts-v1/; @@ -11,6 +11,10 @@ model = "Toradex Colibri iMX6ULL"; compatible = "toradex,imx6ull-colibri", "fsl,imx6ull"; + aliases { + mmc0 = &usdhc1; + }; + chosen { stdout-path = &uart1; }; @@ -190,10 +194,18 @@ dr_mode = "host"; }; +/* Colibri MMC */ &usdhc1 { assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>; assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; assigned-clock-rates = <0>, <198000000>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */ + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; }; &iomuxc { @@ -547,4 +559,3 @@ >; }; }; - diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c index 8493b1dfdd..c9af44e30e 100644 --- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c +++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c @@ -18,11 +18,9 @@ #include #include #include -#include #include #include #include -#include #include #include #include @@ -34,10 +32,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ - PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \ PAD_CTL_DSE_48ohm) @@ -56,19 +50,6 @@ int dram_init(void) return 0; } -#ifdef CONFIG_FSL_ESDHC -static iomux_v3_cfg_t const usdhc1_pads[] = { - MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - - MX6_PAD_SNVS_TAMPER0__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; -#endif - static iomux_v3_cfg_t const usb_cdet_pads[] = { MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), }; @@ -135,57 +116,6 @@ static int setup_lcd(void) } #endif -#ifdef CONFIG_FSL_ESDHC - -#define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0) - -static struct fsl_esdhc_cfg usdhc_cfg[] = { - {USDHC1_BASE_ADDR, 0, 4}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - switch (cfg->esdhc_base) { - case USDHC1_BASE_ADDR: - ret = !gpio_get_value(USDHC1_CD_GPIO); - break; - } - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ - int i, ret; - - /* USDHC1 is mmc0 */ - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - switch (i) { - case 0: - imx_iomux_v3_setup_multiple_pads(usdhc1_pads, - ARRAY_SIZE(usdhc1_pads)); - gpio_request(USDHC1_CD_GPIO, "usdhc1_cd"); - gpio_direction_input(USDHC1_CD_GPIO); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - break; - default: - printf("Warning: you configured more USDHC controllers" - "(%d) than supported by the board\n", i + 1); - return -EINVAL; - } - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (ret) - return ret; - } - - return 0; -} -#endif - #ifdef CONFIG_FEC_MXC static int setup_fec(void) { diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig index ce2c09338d..69305323f2 100644 --- a/configs/colibri-imx6ull_defconfig +++ b/configs/colibri-imx6ull_defconfig @@ -50,6 +50,7 @@ CONFIG_DFU_NAND=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MXC=y +CONFIG_DM_MMC=y CONFIG_FSL_ESDHC=y CONFIG_MTD=y CONFIG_NAND=y diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index 31248b14a1..7a7a70e457 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2018 Toradex AG + * Copyright 2018-2019 Toradex AG * * Configuration settings for the Colibri iMX6ULL module. * @@ -30,7 +30,7 @@ /* ENET1 */ #define IMX_FEC_BASE ENET2_BASE_ADDR -/* MMC Config*/ +/* MMC Config */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 1 @@ -182,4 +182,4 @@ #define CONFIG_VIDEO_BMP_LOGO #endif -#endif +#endif /* __COLIBRI_IMX6ULL_CONFIG_H */ -- 2.25.1