From 52af7e3e81b92911906e19294df16c77f17fdab6 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 27 Mar 2018 12:01:24 +0200 Subject: [PATCH] arm64: zynqmp: Remove additional comments from dts files Remove additional comments which were removed as the part of upstreaming. Signed-off-by: Michal Simek --- arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 1 - arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 1 - arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts | 1 - arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts | 3 --- arch/arm/dts/zynqmp-zcu102-revA.dts | 29 +++++++----------------- arch/arm/dts/zynqmp-zcu102-revB.dts | 2 -- 6 files changed, 8 insertions(+), 29 deletions(-) diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts index 0ddb43df6d..3c2054734c 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts @@ -39,7 +39,6 @@ }; }; -/* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts index 670cc44755..22a3c1ebec 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts @@ -49,7 +49,6 @@ status = "okay"; }; -/* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts index 41012fa61d..fb49b4fcb4 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts @@ -51,7 +51,6 @@ status = "okay"; }; -/* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts index 99aa74e54e..fe737be038 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts @@ -37,7 +37,6 @@ }; }; -/* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; }; @@ -83,12 +82,10 @@ status = "okay"; }; -/* FIXME: Add device */ &i2c0 { status = "okay"; }; -/* FIXME: Add device */ &i2c1 { status = "okay"; }; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index c9cffc125b..efa94a1419 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -77,7 +77,6 @@ status = "okay"; }; -/* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; }; @@ -381,23 +380,17 @@ reg = <0x20>; }; -/* drivers/hwmon/pmbus/Kconfig:86: be called max20751. -drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o -*/ - max20751@72 { /* u95 FIXME - not detected */ + max20751@72 { /* u95 */ compatible = "maxim,max20751"; reg = <0x72>; }; - max20751@73 { /* u96 FIXME - not detected */ + max20751@73 { /* u96 */ compatible = "maxim,max20751"; reg = <0x73>; }; }; /* Bus 3 is not connected */ }; - - /* FIXME PMOD - j160 */ - /* FIXME MSP430F - u41 - not detected */ }; &i2c1 { @@ -409,8 +402,7 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; - /* FIXME PL i2c via PCA9306 - u45 */ - /* FIXME MSP430 - u41 - not detected */ + /* PL i2c via PCA9306 - u45 */ i2c-mux@74 { /* u34 */ compatible = "nxp,pca9548"; #address-cells = <1>; @@ -515,24 +507,19 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o #size-cells = <0>; reg = <3>; /* DDR4 SODIMM */ - dev@19 { /* u-boot detection */ - compatible = "xxx"; + dev@19 { reg = <0x19>; }; - dev@30 { /* u-boot detection */ - compatible = "xxx"; + dev@30 { reg = <0x30>; }; - dev@35 { /* u-boot detection */ - compatible = "xxx"; + dev@35 { reg = <0x35>; }; - dev@36 { /* u-boot detection */ - compatible = "xxx"; + dev@36 { reg = <0x36>; }; - dev@51 { /* u-boot detection - maybe SPD */ - compatible = "xxx"; + dev@51 { reg = <0x51>; }; }; diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts index 384d0a2a0c..af4d86882a 100644 --- a/arch/arm/dts/zynqmp-zcu102-revB.dts +++ b/arch/arm/dts/zynqmp-zcu102-revB.dts @@ -26,8 +26,6 @@ /delete-node/ phy@21; }; -/* Different qspi 512Mbit version */ - /* Fix collision with u61 */ &i2c0 { i2c-mux@75 { -- 2.25.1