From 518501da4c9d05e6ac87908fbad79d8e10e4b0e4 Mon Sep 17 00:00:00 2001 From: SARTRE Leo Date: Thu, 20 Jun 2013 15:46:50 +0200 Subject: [PATCH] ARM: Congatec: README update README: U-boot works both on SPI-NOR and SDcard Signed-off-by: Leo Sartre Acked-by: Otavio Salvador --- board/congatec/cgtqmx6eval/README | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/board/congatec/cgtqmx6eval/README b/board/congatec/cgtqmx6eval/README index bbf0f75a4d..5e76d2ac5e 100644 --- a/board/congatec/cgtqmx6eval/README +++ b/board/congatec/cgtqmx6eval/README @@ -7,8 +7,7 @@ Conga-QEVAl Evaluation Carrier board with qmx6 quad module. 1. Boot source, boot from SD card --------------------------------- -This version of u-boot works only on the SD card. By default, the -Congatec board can boot only from the SPI-NOR. +By default, the Congatec board can boot only from the SPI-NOR. But, with the u-boot version provided with the board you can write boot registers to force the board to reboot and boot from the SD slot. If "bmode" command is not available from your pre-installed u-boot, these -- 2.25.1