From 4d934a9ffd64a0dec81ef13e1ca6b78a5fb3eb33 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:24 +0530 Subject: [PATCH] spi: Zap ftssp010_spi driver Zap ftssp010_spi driver since the boards used this driver is no longer been active. Signed-off-by: Jagan Teki Cc: Kuo-Jung Su Cc: Axel Lin --- drivers/spi/Makefile | 1 - drivers/spi/ftssp010_spi.c | 498 ------------------------------------- 2 files changed, 499 deletions(-) delete mode 100644 drivers/spi/ftssp010_spi.c diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 93065b750f..1e3611da04 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -28,7 +28,6 @@ obj-$(CONFIG_CF_QSPI) += cf_qspi.o obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o -obj-$(CONFIG_FTSSP010_SPI) += ftssp010_spi.o obj-$(CONFIG_ICH_SPI) += ich.o obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o obj-$(CONFIG_LPC32XX_SSP) += lpc32xx_ssp.o diff --git a/drivers/spi/ftssp010_spi.c b/drivers/spi/ftssp010_spi.c deleted file mode 100644 index c7d6480478..0000000000 --- a/drivers/spi/ftssp010_spi.c +++ /dev/null @@ -1,498 +0,0 @@ -/* - * (C) Copyright 2013 - * Faraday Technology Corporation. - * Kuo-Jung Su - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -#ifndef CONFIG_FTSSP010_BASE_LIST -#define CONFIG_FTSSP010_BASE_LIST { CONFIG_FTSSP010_BASE } -#endif - -#ifndef CONFIG_FTSSP010_GPIO_BASE -#define CONFIG_FTSSP010_GPIO_BASE 0 -#endif - -#ifndef CONFIG_FTSSP010_GPIO_LIST -#define CONFIG_FTSSP010_GPIO_LIST { CONFIG_FTSSP010_GPIO_BASE } -#endif - -#ifndef CONFIG_FTSSP010_CLOCK -#define CONFIG_FTSSP010_CLOCK clk_get_rate("SSP"); -#endif - -#ifndef CONFIG_FTSSP010_TIMEOUT -#define CONFIG_FTSSP010_TIMEOUT 100 -#endif - -/* FTSSP010 chip registers */ -struct ftssp010_regs { - uint32_t cr[3];/* control register */ - uint32_t sr; /* status register */ - uint32_t icr; /* interrupt control register */ - uint32_t isr; /* interrupt status register */ - uint32_t dr; /* data register */ - uint32_t rsvd[17]; - uint32_t revr; /* revision register */ - uint32_t fear; /* feature register */ -}; - -/* Control Register 0 */ -#define CR0_FFMT_MASK (7 << 12) -#define CR0_FFMT_SSP (0 << 12) -#define CR0_FFMT_SPI (1 << 12) -#define CR0_FFMT_MICROWIRE (2 << 12) -#define CR0_FFMT_I2S (3 << 12) -#define CR0_FFMT_AC97 (4 << 12) -#define CR0_FLASH (1 << 11) -#define CR0_FSDIST(x) (((x) & 0x03) << 8) -#define CR0_LOOP (1 << 7) /* loopback mode */ -#define CR0_LSB (1 << 6) /* LSB */ -#define CR0_FSPO (1 << 5) /* fs atcive low (I2S only) */ -#define CR0_FSJUSTIFY (1 << 4) -#define CR0_OPM_SLAVE (0 << 2) -#define CR0_OPM_MASTER (3 << 2) -#define CR0_OPM_I2S_MSST (3 << 2) /* master stereo mode */ -#define CR0_OPM_I2S_MSMO (2 << 2) /* master mono mode */ -#define CR0_OPM_I2S_SLST (1 << 2) /* slave stereo mode */ -#define CR0_OPM_I2S_SLMO (0 << 2) /* slave mono mode */ -#define CR0_SCLKPO (1 << 1) /* clock polarity */ -#define CR0_SCLKPH (1 << 0) /* clock phase */ - -/* Control Register 1 */ -#define CR1_PDL(x) (((x) & 0xff) << 24) /* padding length */ -#define CR1_SDL(x) ((((x) - 1) & 0x1f) << 16) /* data length */ -#define CR1_DIV(x) (((x) - 1) & 0xffff) /* clock divider */ - -/* Control Register 2 */ -#define CR2_CS(x) (((x) & 3) << 10) /* CS/FS select */ -#define CR2_FS (1 << 9) /* CS/FS signal level */ -#define CR2_TXEN (1 << 8) /* tx enable */ -#define CR2_RXEN (1 << 7) /* rx enable */ -#define CR2_RESET (1 << 6) /* chip reset */ -#define CR2_TXFC (1 << 3) /* tx fifo Clear */ -#define CR2_RXFC (1 << 2) /* rx fifo Clear */ -#define CR2_TXDOE (1 << 1) /* tx data output enable */ -#define CR2_EN (1 << 0) /* chip enable */ - -/* Status Register */ -#define SR_RFF (1 << 0) /* rx fifo full */ -#define SR_TFNF (1 << 1) /* tx fifo not full */ -#define SR_BUSY (1 << 2) /* chip busy */ -#define SR_RFVE(reg) (((reg) >> 4) & 0x1f) /* rx fifo valid entries */ -#define SR_TFVE(reg) (((reg) >> 12) & 0x1f) /* tx fifo valid entries */ - -/* Feature Register */ -#define FEAR_BITS(reg) ((((reg) >> 0) & 0xff) + 1) /* data width */ -#define FEAR_RFSZ(reg) ((((reg) >> 8) & 0xff) + 1) /* rx fifo size */ -#define FEAR_TFSZ(reg) ((((reg) >> 16) & 0xff) + 1) /* tx fifo size */ -#define FEAR_AC97 (1 << 24) -#define FEAR_I2S (1 << 25) -#define FEAR_SPI_MWR (1 << 26) -#define FEAR_SSP (1 << 27) -#define FEAR_SPDIF (1 << 28) - -/* FTGPIO010 chip registers */ -struct ftgpio010_regs { - uint32_t out; /* 0x00: Data Output */ - uint32_t in; /* 0x04: Data Input */ - uint32_t dir; /* 0x08: Direction */ - uint32_t bypass; /* 0x0c: Bypass */ - uint32_t set; /* 0x10: Data Set */ - uint32_t clr; /* 0x14: Data Clear */ - uint32_t pull_up; /* 0x18: Pull-Up Enabled */ - uint32_t pull_st; /* 0x1c: Pull State (0=pull-down, 1=pull-up) */ -}; - -struct ftssp010_gpio { - struct ftgpio010_regs *regs; - uint32_t pin; -}; - -struct ftssp010_spi { - struct spi_slave slave; - struct ftssp010_gpio gpio; - struct ftssp010_regs *regs; - uint32_t fifo; - uint32_t mode; - uint32_t div; - uint32_t clk; - uint32_t speed; - uint32_t revision; -}; - -static inline struct ftssp010_spi *to_ftssp010_spi(struct spi_slave *slave) -{ - return container_of(slave, struct ftssp010_spi, slave); -} - -static int get_spi_chip(int bus, struct ftssp010_spi *chip) -{ - uint32_t fear, base[] = CONFIG_FTSSP010_BASE_LIST; - - if (bus >= ARRAY_SIZE(base) || !base[bus]) - return -1; - - chip->regs = (struct ftssp010_regs *)base[bus]; - - chip->revision = readl(&chip->regs->revr); - - fear = readl(&chip->regs->fear); - chip->fifo = min_t(uint32_t, FEAR_TFSZ(fear), FEAR_RFSZ(fear)); - - return 0; -} - -static int get_spi_gpio(int bus, struct ftssp010_gpio *chip) -{ - uint32_t base[] = CONFIG_FTSSP010_GPIO_LIST; - - if (bus >= ARRAY_SIZE(base) || !base[bus]) - return -1; - - chip->regs = (struct ftgpio010_regs *)(base[bus] & 0xfff00000); - chip->pin = base[bus] & 0x1f; - - /* make it an output pin */ - setbits_le32(&chip->regs->dir, 1 << chip->pin); - - return 0; -} - -static int ftssp010_wait(struct ftssp010_spi *chip) -{ - struct ftssp010_regs *regs = chip->regs; - ulong t; - - /* wait until device idle */ - for (t = get_timer(0); get_timer(t) < CONFIG_FTSSP010_TIMEOUT; ) { - if (!(readl(®s->sr) & SR_BUSY)) - return 0; - } - - puts("ftspi010: busy timeout\n"); - - return -1; -} - -static int ftssp010_wait_tx(struct ftssp010_spi *chip) -{ - struct ftssp010_regs *regs = chip->regs; - ulong t; - - /* wait until tx fifo not full */ - for (t = get_timer(0); get_timer(t) < CONFIG_FTSSP010_TIMEOUT; ) { - if (readl(®s->sr) & SR_TFNF) - return 0; - } - - puts("ftssp010: tx timeout\n"); - - return -1; -} - -static int ftssp010_wait_rx(struct ftssp010_spi *chip) -{ - struct ftssp010_regs *regs = chip->regs; - ulong t; - - /* wait until rx fifo not empty */ - for (t = get_timer(0); get_timer(t) < CONFIG_FTSSP010_TIMEOUT; ) { - if (SR_RFVE(readl(®s->sr))) - return 0; - } - - puts("ftssp010: rx timeout\n"); - - return -1; -} - -static int ftssp010_spi_work_transfer_v2(struct ftssp010_spi *chip, - const void *tx_buf, void *rx_buf, int len, uint flags) -{ - struct ftssp010_regs *regs = chip->regs; - const uint8_t *txb = tx_buf; - uint8_t *rxb = rx_buf; - - while (len > 0) { - int i, depth = min(chip->fifo >> 2, len); - uint32_t xmsk = 0; - - if (tx_buf) { - for (i = 0; i < depth; ++i) { - ftssp010_wait_tx(chip); - writel(*txb++, ®s->dr); - } - xmsk |= CR2_TXEN | CR2_TXDOE; - if ((readl(®s->cr[2]) & xmsk) != xmsk) - setbits_le32(®s->cr[2], xmsk); - } - if (rx_buf) { - xmsk |= CR2_RXEN; - if ((readl(®s->cr[2]) & xmsk) != xmsk) - setbits_le32(®s->cr[2], xmsk); - for (i = 0; i < depth; ++i) { - ftssp010_wait_rx(chip); - *rxb++ = (uint8_t)readl(®s->dr); - } - } - - len -= depth; - } - - return 0; -} - -static int ftssp010_spi_work_transfer_v1(struct ftssp010_spi *chip, - const void *tx_buf, void *rx_buf, int len, uint flags) -{ - struct ftssp010_regs *regs = chip->regs; - const uint8_t *txb = tx_buf; - uint8_t *rxb = rx_buf; - - while (len > 0) { - int i, depth = min(chip->fifo >> 2, len); - uint32_t tmp; - - for (i = 0; i < depth; ++i) { - ftssp010_wait_tx(chip); - writel(txb ? (*txb++) : 0, ®s->dr); - } - for (i = 0; i < depth; ++i) { - ftssp010_wait_rx(chip); - tmp = readl(®s->dr); - if (rxb) - *rxb++ = (uint8_t)tmp; - } - - len -= depth; - } - - return 0; -} - -static void ftssp010_cs_set(struct ftssp010_spi *chip, int high) -{ - struct ftssp010_regs *regs = chip->regs; - struct ftssp010_gpio *gpio = &chip->gpio; - uint32_t mask; - - /* cs pull high/low */ - if (chip->revision >= 0x11900) { - mask = CR2_CS(chip->slave.cs) | (high ? CR2_FS : 0); - writel(mask, ®s->cr[2]); - } else if (gpio->regs) { - mask = 1 << gpio->pin; - if (high) - writel(mask, &gpio->regs->set); - else - writel(mask, &gpio->regs->clr); - } - - /* extra delay for signal propagation */ - udelay_masked(1); -} - -/* - * Determine if a SPI chipselect is valid. - * This function is provided by the board if the low-level SPI driver - * needs it to determine if a given chipselect is actually valid. - * - * Returns: 1 if bus:cs identifies a valid chip on this board, 0 - * otherwise. - */ -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - struct ftssp010_spi chip; - - if (get_spi_chip(bus, &chip)) - return 0; - - if (!cs) - return 1; - else if ((cs < 4) && (chip.revision >= 0x11900)) - return 1; - - return 0; -} - -/* - * Activate a SPI chipselect. - * This function is provided by the board code when using a driver - * that can't control its chipselects automatically (e.g. - * common/soft_spi.c). When called, it should activate the chip select - * to the device identified by "slave". - */ -void spi_cs_activate(struct spi_slave *slave) -{ - struct ftssp010_spi *chip = to_ftssp010_spi(slave); - struct ftssp010_regs *regs = chip->regs; - - /* cs pull */ - if (chip->mode & SPI_CS_HIGH) - ftssp010_cs_set(chip, 1); - else - ftssp010_cs_set(chip, 0); - - /* chip enable + fifo clear */ - setbits_le32(®s->cr[2], CR2_EN | CR2_TXFC | CR2_RXFC); -} - -/* - * Deactivate a SPI chipselect. - * This function is provided by the board code when using a driver - * that can't control its chipselects automatically (e.g. - * common/soft_spi.c). When called, it should deactivate the chip - * select to the device identified by "slave". - */ -void spi_cs_deactivate(struct spi_slave *slave) -{ - struct ftssp010_spi *chip = to_ftssp010_spi(slave); - - /* wait until chip idle */ - ftssp010_wait(chip); - - /* cs pull */ - if (chip->mode & SPI_CS_HIGH) - ftssp010_cs_set(chip, 0); - else - ftssp010_cs_set(chip, 1); -} - -void spi_init(void) -{ - /* nothing to do */ -} - -struct spi_slave *spi_setup_slave(uint bus, uint cs, uint max_hz, uint mode) -{ - struct ftssp010_spi *chip; - - if (mode & SPI_3WIRE) { - puts("ftssp010: can't do 3-wire\n"); - return NULL; - } - - if (mode & SPI_SLAVE) { - puts("ftssp010: can't do slave mode\n"); - return NULL; - } - - if (mode & SPI_PREAMBLE) { - puts("ftssp010: can't skip preamble bytes\n"); - return NULL; - } - - if (!spi_cs_is_valid(bus, cs)) { - puts("ftssp010: invalid (bus, cs)\n"); - return NULL; - } - - chip = spi_alloc_slave(struct ftssp010_spi, bus, cs); - if (!chip) - return NULL; - - if (get_spi_chip(bus, chip)) - goto free_out; - - if (chip->revision < 0x11900 && get_spi_gpio(bus, &chip->gpio)) { - puts("ftssp010: Before revision 1.19.0, its clock & cs are\n" - "controlled by tx engine which is not synced with rx engine,\n" - "so the clock & cs might be shutdown before rx engine\n" - "finishs its jobs.\n" - "If possible, please add a dedicated gpio for it.\n"); - } - - chip->mode = mode; - chip->clk = CONFIG_FTSSP010_CLOCK; - chip->div = 2; - if (max_hz) { - while (chip->div < 0xffff) { - if ((chip->clk / (2 * chip->div)) <= max_hz) - break; - chip->div += 1; - } - } - chip->speed = chip->clk / (2 * chip->div); - - return &chip->slave; - -free_out: - free(chip); - return NULL; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct ftssp010_spi *chip = to_ftssp010_spi(slave); - - free(chip); -} - -int spi_claim_bus(struct spi_slave *slave) -{ - struct ftssp010_spi *chip = to_ftssp010_spi(slave); - struct ftssp010_regs *regs = chip->regs; - - writel(CR1_SDL(8) | CR1_DIV(chip->div), ®s->cr[1]); - - if (chip->revision >= 0x11900) { - writel(CR0_OPM_MASTER | CR0_FFMT_SPI | CR0_FSPO | CR0_FLASH, - ®s->cr[0]); - writel(CR2_TXFC | CR2_RXFC, - ®s->cr[2]); - } else { - writel(CR0_OPM_MASTER | CR0_FFMT_SPI | CR0_FSPO, - ®s->cr[0]); - writel(CR2_TXFC | CR2_RXFC | CR2_EN | CR2_TXDOE, - ®s->cr[2]); - } - - if (chip->mode & SPI_LOOP) - setbits_le32(®s->cr[0], CR0_LOOP); - - if (chip->mode & SPI_CPOL) - setbits_le32(®s->cr[0], CR0_SCLKPO); - - if (chip->mode & SPI_CPHA) - setbits_le32(®s->cr[0], CR0_SCLKPH); - - spi_cs_deactivate(slave); - - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - struct ftssp010_spi *chip = to_ftssp010_spi(slave); - struct ftssp010_regs *regs = chip->regs; - - writel(0, ®s->cr[2]); -} - -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) -{ - struct ftssp010_spi *chip = to_ftssp010_spi(slave); - uint32_t len = bitlen >> 3; - - if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); - - if (chip->revision >= 0x11900) - ftssp010_spi_work_transfer_v2(chip, dout, din, len, flags); - else - ftssp010_spi_work_transfer_v1(chip, dout, din, len, flags); - - if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); - - return 0; -} -- 2.25.1