From 4c2c28a46571498c55b38d988ace3d176368ed6b Mon Sep 17 00:00:00 2001 From: T Karthik Reddy Date: Sun, 19 Jan 2020 23:59:23 -0700 Subject: [PATCH] mtd: nand: Fix on-die ecc issues in arasan_nfc driver Fixed wrong enumeration of nand_config structure. Added chip select function before reading the nand chip for maf/dev id's, without this unable to access id's from some of the micron chips. Also added a print statement to identify if a nand flash is using on-die ecc. Signed-off-by: T Karthik Reddy Signed-off-by: Michal Simek --- drivers/mtd/nand/raw/arasan_nfc.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/raw/arasan_nfc.c b/drivers/mtd/nand/raw/arasan_nfc.c index d1b1a4263a..110c32b396 100644 --- a/drivers/mtd/nand/raw/arasan_nfc.c +++ b/drivers/mtd/nand/raw/arasan_nfc.c @@ -1120,12 +1120,15 @@ static void arasan_nand_cmd_function(struct mtd_info *mtd, unsigned int command, static void arasan_check_ondie(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd_to_nand(mtd); - struct nand_config *nand = nand_get_controller_data(nand_chip); + struct nand_drv *info = nand_get_controller_data(nand_chip); + struct nand_config *nand = &info->config; u8 maf_id, dev_id; u8 get_feature[4]; u8 set_feature[4] = {ENABLE_ONDIE_ECC, 0x00, 0x00, 0x00}; u32 i; + nand_chip->select_chip(mtd, 0); + /* Send the command for reading device ID */ nand_chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); nand_chip->cmdfunc(mtd, NAND_CMD_READID, 0, -1); @@ -1150,10 +1153,12 @@ static void arasan_check_ondie(struct mtd_info *mtd) for (i = 0; i < 4; i++) get_feature[i] = nand_chip->read_byte(mtd); - if (get_feature[0] & ENABLE_ONDIE_ECC) + if (get_feature[0] & ENABLE_ONDIE_ECC) { nand->on_die_ecc_enabled = true; - else + printf("On-DIE ECC Enabled\n"); + } else { printf("%s: Unable to enable OnDie ECC\n", __func__); + } /* Use the BBT pattern descriptors */ nand_chip->bbt_td = &bbt_main_descr; -- 2.25.1