From 49822e23a09e2f529e6774ad61f23e43ab208cbc Mon Sep 17 00:00:00 2001 From: wdenk Date: Sat, 19 Jun 2004 21:19:10 +0000 Subject: [PATCH] Patch by Josef Wagner, 04 Jun 2004: - DDR Ram support for PM520 (MPC5200) - support for different flash types (PM520) - USB / IDE / CF-Card / DiskOnChip support for PM520 - 8 bit boot rom support for PM520/CE520 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245) - I2C and RTC support for CPC45 - support of new flash type (28F160C3T) for CPC45 --- CHANGELOG | 11 +- CREDITS | 2 +- Makefile | 16 +- board/cpc45/cpc45.c | 152 +++- board/cpc45/flash.c | 311 +++---- board/lpd7a40x/flash.c | 2 +- board/mx1ads/Makefile | 48 +- board/mx1ads/config.mk | 49 +- board/mx1ads/memsetup.S | 9 +- board/mx1ads/mx1ads.c | 41 +- board/mx1ads/syncflash.c | 46 +- board/mx1ads/u-boot.lds | 2 +- board/pm520/flash.c | 25 +- board/pm520/mt46v16m16-75.h | 37 + board/pm520/mt48lc16m16a2-75.h | 43 + board/pm520/pm520.c | 284 +++++-- common/env_nand.c | 2 +- cpu/mc9328/Makefile | 2 +- cpu/mc9328/interrupts.c | 3 +- cpu/mc9328/serial.c | 27 +- include/configs/CPC45.h | 404 ++++----- include/configs/PM520.h | 154 +++- include/configs/RPXlite_DW.h | 2 - include/configs/Sandpoint8245.h | 2 +- include/configs/mx1ads.h | 24 +- include/mc9328.h | 1402 ++++++++++++++----------------- 26 files changed, 1712 insertions(+), 1388 deletions(-) create mode 100644 board/pm520/mt46v16m16-75.h create mode 100644 board/pm520/mt48lc16m16a2-75.h diff --git a/CHANGELOG b/CHANGELOG index f923382e17..de109410cd 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,12 +2,21 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Patch by Josef Wagner, 04 Jun 2004: + - DDR Ram support for PM520 (MPC5200) + - support for different flash types (PM520) + - USB / IDE / CF-Card / DiskOnChip support for PM520 + - 8 bit boot rom support for PM520/CE520 + - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245) + - I2C and RTC support for CPC45 + - support of new flash type (28F160C3T) for CPC45 + * Fix flash parameters passed to Linux for PPChameleon board * Remove eth_init() from lib_arm/board.c; it's done in net.net.c. * Patch by Paul Ruhland, 10 Jun 2004: - fix support for Logic SDK-LH7A404 board and clean up the + fix support for Logic SDK-LH7A404 board and clean up the LH7A404 register macros. * Patch by Matthew McClintock, 10 Jun 2004: diff --git a/CREDITS b/CREDITS index 8f0057c09d..dcd2906724 100644 --- a/CREDITS +++ b/CREDITS @@ -362,7 +362,7 @@ D: Port to MPC555/556 microcontrollers and support for cmi board N: Ming-Len Wu E: minglen_wu@techware.com.tw -D: Motorola MX1ADS board support +D: Motorola MX1ADS board support W: http://www.techware.com.tw/ N: Xianghua Xiao diff --git a/Makefile b/Makefile index 7fcf064e52..d8b8c7bd5f 100644 --- a/Makefile +++ b/Makefile @@ -255,8 +255,20 @@ TOP5200_config: unconfig @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h @./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk -PM520_config: unconfig - @./mkconfig $(@:_config=) ppc mpc5xxx pm520 +PM520_config \ +PM520_DDR_config \ +PM520_ROMBOOT_config \ +PM520_ROMBOOT_DDR_config: unconfig + @ >include/config.h + @[ -z "$(findstring DDR,$@)" ] || \ + { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ + echo "... DDR memory revision" ; \ + } + @[ -z "$(findstring ROMBOOT,$@)" ] || \ + { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ + echo "... booting from 8-bit flash" ; \ + } + @./mkconfig -a PM520 ppc mpc5xxx pm520 ######################################################################### ## MPC8xx Systems diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c index ad69245827..92ccd42e7f 100644 --- a/board/cpc45/cpc45.c +++ b/board/cpc45/cpc45.c @@ -25,6 +25,7 @@ #include #include #include +#include int sysControlDisplay(int digit, uchar ascii_code); extern void Plx9030Init(void); @@ -58,46 +59,134 @@ int checkboard(void) return 0; } -long int initdram(int board_type) +long int initdram (int board_type) { - long size; - long new_bank0_end; - long mear1; - long emear1; - - size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); - - new_bank0_end = size - 1; - mear1 = mpc824x_mpc107_getreg(MEAR1); - emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1); - - return (size); + int m, row, col, bank, i, ref; + unsigned long start, end; + uint32_t mccr1, mccr2; + uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0; + uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0; + uint8_t mber = 0; + unsigned int tmp; + + i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + + if (i2c_reg_read (0x50, 2) != 0x04) + return 0; /* Memory type */ + + m = i2c_reg_read (0x50, 5); /* # of physical banks */ + row = i2c_reg_read (0x50, 3); /* # of rows */ + col = i2c_reg_read (0x50, 4); /* # of columns */ + bank = i2c_reg_read (0x50, 17); /* # of logical banks */ + ref = i2c_reg_read (0x50, 12); /* refresh rate / type */ + + CONFIG_READ_WORD(MCCR1, mccr1); + mccr1 &= 0xffff0000; + + CONFIG_READ_WORD(MCCR2, mccr2); + mccr2 &= 0xffff0000; + + start = CFG_SDRAM_BASE; + end = start + (1 << (col + row + 3) ) * bank - 1; + + for (i = 0; i < m; i++) { + mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2; + if (i < 4) { + msar1 |= ((start >> 20) & 0xff) << i * 8; + emsar1 |= ((start >> 28) & 0xff) << i * 8; + mear1 |= ((end >> 20) & 0xff) << i * 8; + emear1 |= ((end >> 28) & 0xff) << i * 8; + } else { + msar2 |= ((start >> 20) & 0xff) << (i-4) * 8; + emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8; + mear2 |= ((end >> 20) & 0xff) << (i-4) * 8; + emear2 |= ((end >> 28) & 0xff) << (i-4) * 8; + } + mber |= 1 << i; + start += (1 << (col + row + 3) ) * bank; + end += (1 << (col + row + 3) ) * bank; + } + for (; i < 8; i++) { + if (i < 4) { + msar1 |= 0xff << i * 8; + emsar1 |= 0x30 << i * 8; + mear1 |= 0xff << i * 8; + emear1 |= 0x30 << i * 8; + } else { + msar2 |= 0xff << (i-4) * 8; + emsar2 |= 0x30 << (i-4) * 8; + mear2 |= 0xff << (i-4) * 8; + emear2 |= 0x30 << (i-4) * 8; + } + } + + switch(ref) { + case 0x00: + case 0x80: + tmp = get_bus_freq(0) / 1000000 * 15625 / 1000 - 22; + break; + case 0x01: + case 0x81: + tmp = get_bus_freq(0) / 1000000 * 3900 / 1000 - 22; + break; + case 0x02: + case 0x82: + tmp = get_bus_freq(0) / 1000000 * 7800 / 1000 - 22; + break; + case 0x03: + case 0x83: + tmp = get_bus_freq(0) / 1000000 * 31300 / 1000 - 22; + break; + case 0x04: + case 0x84: + tmp = get_bus_freq(0) / 1000000 * 62500 / 1000 - 22; + break; + case 0x05: + case 0x85: + tmp = get_bus_freq(0) / 1000000 * 125000 / 1000 - 22; + break; + default: + tmp = 0x512; + break; + } + + CONFIG_WRITE_WORD(MCCR1, mccr1); + CONFIG_WRITE_WORD(MCCR2, tmp << MCCR2_REFINT_SHIFT); + CONFIG_WRITE_WORD(MSAR1, msar1); + CONFIG_WRITE_WORD(EMSAR1, emsar1); + CONFIG_WRITE_WORD(MEAR1, mear1); + CONFIG_WRITE_WORD(EMEAR1, emear1); + CONFIG_WRITE_WORD(MSAR2, msar2); + CONFIG_WRITE_WORD(EMSAR2, emsar2); + CONFIG_WRITE_WORD(MEAR2, mear2); + CONFIG_WRITE_WORD(EMEAR2, emear2); + CONFIG_WRITE_BYTE(MBER, mber); + + return (1 << (col + row + 3) ) * bank * m; } + /* * Initialize PCI Devices, report devices found. */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_sandpoint_config_table[] = { - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID, +static struct pci_config_table pci_cpc45_config_table[] = { +#ifndef CONFIG_PCI_PNP + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0F, PCI_ANY_ID, pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, PCI_ENET0_MEMADDR, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0D, PCI_ANY_ID, + pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR, + PCI_PLX9030_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, +#endif /*CONFIG_PCI_PNP*/ { } }; -#endif - struct pci_controller hose = { #ifndef CONFIG_PCI_PNP - config_table: pci_sandpoint_config_table, + config_table: pci_cpc45_config_table, #endif }; @@ -108,6 +197,9 @@ void pci_init_board(void) /* init PCI_to_LOCAL Bus BRIDGE */ Plx9030Init(); + /* Clear Display */ + DISP_CWORD = 0x0; + sysControlDisplay(0,' '); sysControlDisplay(1,'C'); sysControlDisplay(2,'P'); @@ -130,16 +222,14 @@ void pci_init_board(void) * RETURNS: NA */ -int sysControlDisplay - ( - int digit, /* number of digit 0..7 */ - uchar ascii_code /* ASCII code */ - ) +int sysControlDisplay (int digit, /* number of digit 0..7 */ + uchar ascii_code /* ASCII code */ + ) { if ((digit < 0) || (digit > 7)) return (-1); - *((volatile uchar*)(DISP_CHR_RAM + digit)) = ascii_code; + *((volatile uchar *) (DISP_CHR_RAM + digit)) = ascii_code; return (0); } diff --git a/board/cpc45/flash.c b/board/cpc45/flash.c index 904923543d..37dd182ba4 100644 --- a/board/cpc45/flash.c +++ b/board/cpc45/flash.c @@ -41,12 +41,12 @@ #define MAIN_SECT_SIZE 0x40000 #define PARAM_SECT_SIZE 0x8000 -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; -static int write_data (flash_info_t *info, ulong dest, ulong *data); -static void write_via_fpu(vu_long *addr, ulong *data); -static __inline__ unsigned long get_msr(void); -static __inline__ void set_msr(unsigned long msr); +static int write_data (flash_info_t * info, ulong dest, ulong * data); +static void write_via_fpu (vu_long * addr, ulong * data); +static __inline__ unsigned long get_msr (void); +static __inline__ void set_msr (unsigned long msr); /*---------------------------------------------------------------------*/ #undef DEBUG_FLASH @@ -62,102 +62,132 @@ static __inline__ void set_msr(unsigned long msr); /*----------------------------------------------------------------------- */ -unsigned long flash_init(void) +unsigned long flash_init (void) { - int i, j; - ulong size = 0; - uchar tempChar; + int i, j; + ulong size = 0; + uchar tempChar; + vu_long *tmpaddr; - /* Enable flash writes on CPC45 */ + /* Enable flash writes on CPC45 */ - tempChar = BOARD_CTRL; + tempChar = BOARD_CTRL; - tempChar |= (B_CTRL_FWPT_1 | B_CTRL_FWRE_1); + tempChar |= (B_CTRL_FWPT_1 | B_CTRL_FWRE_1); - tempChar &= ~(B_CTRL_FWPT_0 | B_CTRL_FWRE_0); + tempChar &= ~(B_CTRL_FWPT_0 | B_CTRL_FWRE_0); - BOARD_CTRL = tempChar; + BOARD_CTRL = tempChar; + __asm__ volatile ("sync\n eieio"); - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { - vu_long *addr = (vu_long *)(CFG_FLASH_BASE + i * FLASH_BANK_SIZE); + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + vu_long *addr = (vu_long *) (CFG_FLASH_BASE + i * FLASH_BANK_SIZE); - addr[0] = 0x00900090; + addr[0] = 0x00900090; - DEBUGF ("Flash bank # %d:\n" - "\tManuf. ID @ 0x%08lX: 0x%08lX\n" - "\tDevice ID @ 0x%08lX: 0x%08lX\n", - i, - (ulong)(&addr[0]), addr[0], - (ulong)(&addr[2]), addr[2]); + __asm__ volatile ("sync\n eieio"); + udelay (100); - if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT) && - (addr[2] == addr[3]) && (addr[2] == INTEL_ID_28F160F3T)) - { + DEBUGF ("Flash bank # %d:\n" + "\tManuf. ID @ 0x%08lX: 0x%08lX\n" + "\tDevice ID @ 0x%08lX: 0x%08lX\n", + i, + (ulong) (&addr[0]), addr[0], + (ulong) (&addr[2]), addr[2]); - flash_info[i].flash_id = (FLASH_MAN_INTEL & FLASH_VENDMASK) | - (INTEL_ID_28F160F3T & FLASH_TYPEMASK); - } else { - flash_info[i].flash_id = FLASH_UNKNOWN; - addr[0] = 0xFFFFFFFF; - goto Done; - } + if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT) && + (addr[2] == addr[3]) && (addr[2] == INTEL_ID_28F160F3T)) { - DEBUGF ("flash_id = 0x%08lX\n", flash_info[i].flash_id); + flash_info[i].flash_id = + (FLASH_MAN_INTEL & FLASH_VENDMASK) | + (INTEL_ID_28F160F3T & FLASH_TYPEMASK); - addr[0] = 0xFFFFFFFF; + } else if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT) + && (addr[2] == addr[3]) + && (addr[2] == INTEL_ID_28F160C3T)) { + + flash_info[i].flash_id = + (FLASH_MAN_INTEL & FLASH_VENDMASK) | + (INTEL_ID_28F160C3T & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CFG_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); - for (j = 0; j < flash_info[i].sector_count; j++) { - if (j > 30) { - flash_info[i].start[j] = CFG_FLASH_BASE + - i * FLASH_BANK_SIZE + - (MAIN_SECT_SIZE * 31) + (j - 31) * PARAM_SECT_SIZE; } else { - flash_info[i].start[j] = CFG_FLASH_BASE + - i * FLASH_BANK_SIZE + - j * MAIN_SECT_SIZE; + flash_info[i].flash_id = FLASH_UNKNOWN; + addr[0] = 0xFFFFFFFF; + goto Done; + } + + DEBUGF ("flash_id = 0x%08lX\n", flash_info[i].flash_id); + + addr[0] = 0xFFFFFFFF; + + flash_info[i].size = FLASH_BANK_SIZE; + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + for (j = 0; j < flash_info[i].sector_count; j++) { + if (j > 30) { + flash_info[i].start[j] = CFG_FLASH_BASE + + i * FLASH_BANK_SIZE + + (MAIN_SECT_SIZE * 31) + (j - + 31) * + PARAM_SECT_SIZE; + } else { + flash_info[i].start[j] = CFG_FLASH_BASE + + i * FLASH_BANK_SIZE + + j * MAIN_SECT_SIZE; + } + } + + /* unlock sectors, if 160C3T */ + + for (j = 0; j < flash_info[i].sector_count; j++) { + tmpaddr = (vu_long *) flash_info[i].start[j]; + + if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (INTEL_ID_28F160C3T & FLASH_TYPEMASK)) { + tmpaddr[0] = 0x00600060; + tmpaddr[0] = 0x00D000D0; + tmpaddr[1] = 0x00600060; + tmpaddr[1] = 0x00D000D0; + } } + + size += flash_info[i].size; + + addr[0] = 0x00FF00FF; + addr[1] = 0x00FF00FF; } - size += flash_info[i].size; - } - /* Protect monitor and environment sectors - */ -#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + /* Protect monitor and environment sectors + */ #if CFG_MONITOR_BASE >= CFG_FLASH_BASE + FLASH_BANK_SIZE - flash_protect(FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[1]); + flash_protect (FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + monitor_flash_len - 1, + &flash_info[1]); #else - flash_protect(FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[0]); -#endif + flash_protect (FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + monitor_flash_len - 1, + &flash_info[0]); #endif #if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR) #if CFG_ENV_ADDR >= CFG_FLASH_BASE + FLASH_BANK_SIZE - flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SIZE - 1, - &flash_info[1]); + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[1]); #else - flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SIZE - 1, - &flash_info[0]); + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); #endif #endif Done: - return size; + return size; } /*----------------------------------------------------------------------- @@ -179,6 +209,11 @@ void flash_print_info (flash_info_t * info) case (INTEL_ID_28F160F3T & FLASH_TYPEMASK): printf ("28F160F3T (16Mbit)\n"); break; + + case (INTEL_ID_28F160C3T & FLASH_TYPEMASK): + printf ("28F160C3T (16Mbit)\n"); + break; + default: printf ("Unknown Chip Type 0x%04x\n", i); goto Done; @@ -186,7 +221,7 @@ void flash_print_info (flash_info_t * info) } printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); + info->size >> 20, info->sector_count); printf (" Sector Start Addresses:"); for (i = 0; i < info->sector_count; i++) { @@ -194,7 +229,7 @@ void flash_print_info (flash_info_t * info) printf ("\n "); } printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); + info->protect[i] ? " (RO)" : " "); } printf ("\n"); @@ -205,7 +240,7 @@ Done: /*----------------------------------------------------------------------- */ -int flash_erase (flash_info_t *info, int s_first, int s_last) +int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; ulong start, now, last; @@ -229,33 +264,32 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) } prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { + for (sect = s_first; sect <= s_last; ++sect) { if (info->protect[sect]) { prot++; } } if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); + printf ("- Warning: %d protected sectors will not be erased!\n", prot); } else { printf ("\n"); } start = get_timer (0); - last = start; + last = start; /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { + for (sect = s_first; sect <= s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ - vu_long *addr = (vu_long *)(info->start[sect]); + vu_long *addr = (vu_long *) (info->start[sect]); DEBUGF ("Erase sect %d @ 0x%08lX\n", - sect, (ulong)addr); + sect, (ulong) addr); /* Disable interrupts which might cause a timeout * here. */ - flag = disable_interrupts(); + flag = disable_interrupts (); addr[0] = 0x00500050; /* clear status register */ addr[0] = 0x00200020; /* erase setup */ @@ -267,23 +301,23 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) /* re-enable interrupts if necessary */ if (flag) - enable_interrupts(); + enable_interrupts (); /* wait at least 80us - let's wait 1 ms */ udelay (1000); while (((addr[0] & 0x00800080) != 0x00800080) || - ((addr[1] & 0x00800080) != 0x00800080) ) { - if ((now=get_timer(start)) > - CFG_FLASH_ERASE_TOUT) { + ((addr[1] & 0x00800080) != 0x00800080)) { + if ((now = get_timer (start)) > + CFG_FLASH_ERASE_TOUT) { printf ("Timeout\n"); - addr[0] = 0x00B000B0; /* suspend erase */ - addr[0] = 0x00FF00FF; /* to read mode */ + addr[0] = 0x00B000B0; /* suspend erase */ + addr[0] = 0x00FF00FF; /* to read mode */ return 1; } /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ + if ((now - last) > 1000) { /* every second */ putc ('.'); last = now; } @@ -306,7 +340,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) #define FLASH_WIDTH 8 /* flash bus width in bytes */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { ulong wp, cp, msr; int l, rc, i; @@ -315,16 +349,16 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) ulong *datal = &data[1]; DEBUGF ("Flash write_buff: @ 0x%08lx, src 0x%08lx len %ld\n", - addr, (ulong)src, cnt); + addr, (ulong) src, cnt); if (info->flash_id == FLASH_UNKNOWN) { return 4; } - msr = get_msr(); - set_msr(msr | MSR_FP); + msr = get_msr (); + set_msr (msr | MSR_FP); - wp = (addr & ~(FLASH_WIDTH-1)); /* get lower aligned address */ + wp = (addr & ~(FLASH_WIDTH - 1)); /* get lower aligned address */ /* * handle unaligned start bytes @@ -335,39 +369,35 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) for (i = 0, cp = wp; i < l; i++, cp++) { if (i >= 4) { *datah = (*datah << 8) | - ((*datal & 0xFF000000) >> 24); + ((*datal & 0xFF000000) >> 24); } - *datal = (*datal << 8) | (*(uchar *)cp); + *datal = (*datal << 8) | (*(uchar *) cp); } for (; i < FLASH_WIDTH && cnt > 0; ++i) { - char tmp; - - tmp = *src; - - src++; + char tmp = *src++; if (i >= 4) { *datah = (*datah << 8) | - ((*datal & 0xFF000000) >> 24); + ((*datal & 0xFF000000) >> 24); } *datal = (*datal << 8) | tmp; - - --cnt; ++cp; + --cnt; + ++cp; } for (; cnt == 0 && i < FLASH_WIDTH; ++i, ++cp) { if (i >= 4) { *datah = (*datah << 8) | - ((*datal & 0xFF000000) >> 24); + ((*datal & 0xFF000000) >> 24); } - *datal = (*datah << 8) | (*(uchar *)cp); + *datal = (*datah << 8) | (*(uchar *) cp); } - if ((rc = write_data(info, wp, data)) != 0) { - set_msr(msr); + if ((rc = write_data (info, wp, data)) != 0) { + set_msr (msr); return (rc); } @@ -378,19 +408,19 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) * handle FLASH_WIDTH aligned part */ while (cnt >= FLASH_WIDTH) { - *datah = *(ulong *)src; - *datal = *(ulong *)(src + 4); - if ((rc = write_data(info, wp, data)) != 0) { - set_msr(msr); + *datah = *(ulong *) src; + *datal = *(ulong *) (src + 4); + if ((rc = write_data (info, wp, data)) != 0) { + set_msr (msr); return (rc); } - wp += FLASH_WIDTH; + wp += FLASH_WIDTH; cnt -= FLASH_WIDTH; src += FLASH_WIDTH; } if (cnt == 0) { - set_msr(msr); + set_msr (msr); return (0); } @@ -399,31 +429,28 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) */ *datah = *datal = 0; for (i = 0, cp = wp; i < FLASH_WIDTH && cnt > 0; ++i, ++cp) { - char tmp; - - tmp = *src; - - src++; + char tmp = *src++; if (i >= 4) { - *datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24); + *datah = (*datah << 8) | ((*datal & 0xFF000000) >> + 24); } *datal = (*datal << 8) | tmp; - --cnt; } for (; i < FLASH_WIDTH; ++i, ++cp) { if (i >= 4) { - *datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24); + *datah = (*datah << 8) | ((*datal & 0xFF000000) >> + 24); } - *datal = (*datal << 8) | (*(uchar *)cp); + *datal = (*datal << 8) | (*(uchar *) cp); } - rc = write_data(info, wp, data); - set_msr(msr); + rc = write_data (info, wp, data); + set_msr (msr); return (rc); } @@ -434,32 +461,32 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) * 1 - write timeout * 2 - Flash not erased */ -static int write_data (flash_info_t *info, ulong dest, ulong *data) +static int write_data (flash_info_t * info, ulong dest, ulong * data) { - vu_long *addr = (vu_long *)dest; + vu_long *addr = (vu_long *) dest; ulong start; int flag; /* Check if Flash is (sufficiently) erased */ if (((addr[0] & data[0]) != data[0]) || - ((addr[1] & data[1]) != data[1]) ) { + ((addr[1] & data[1]) != data[1])) { return (2); } /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); + flag = disable_interrupts (); - addr[0] = 0x00400040; /* write setup */ - write_via_fpu(addr, data); + addr[0] = 0x00400040; /* write setup */ + write_via_fpu (addr, data); /* re-enable interrupts if necessary */ if (flag) - enable_interrupts(); + enable_interrupts (); start = get_timer (0); while (((addr[0] & 0x00800080) != 0x00800080) || - ((addr[1] & 0x00800080) != 0x00800080) ) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + ((addr[1] & 0x00800080) != 0x00800080)) { + if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { addr[0] = 0x00FF00FF; /* restore read mode */ return (1); } @@ -472,22 +499,24 @@ static int write_data (flash_info_t *info, ulong dest, ulong *data) /*----------------------------------------------------------------------- */ -static void write_via_fpu(vu_long *addr, ulong *data) +static void write_via_fpu (vu_long * addr, ulong * data) { - __asm__ __volatile__ ("lfd 1, 0(%0)" : : "r" (data)); - __asm__ __volatile__ ("stfd 1, 0(%0)" : : "r" (addr)); + __asm__ __volatile__ ("lfd 1, 0(%0)"::"r" (data)); + __asm__ __volatile__ ("stfd 1, 0(%0)"::"r" (addr)); } + /*----------------------------------------------------------------------- */ -static __inline__ unsigned long get_msr(void) +static __inline__ unsigned long get_msr (void) { - unsigned long msr; + unsigned long msr; + + __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); - __asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :); - return msr; + return msr; } -static __inline__ void set_msr(unsigned long msr) +static __inline__ void set_msr (unsigned long msr) { - __asm__ __volatile__ ("mtmsr %0" : : "r" (msr)); + __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); } diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c index 26a9ce4570..7b8e0141fe 100644 --- a/board/lpd7a40x/flash.c +++ b/board/lpd7a40x/flash.c @@ -300,7 +300,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) do { ulong now; /* check timeout */ - //if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + /*if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { */ if ((now = get_timer(tstart)) > CFG_FLASH_ERASE_TOUT) { printf("tstart = 0x%08lx, now = 0x%08lx\n", tstart, now); *addr = CMD_STATUS_RESET; diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile index 8a17702d0b..72f850d9ce 100644 --- a/board/mx1ads/Makefile +++ b/board/mx1ads/Makefile @@ -1,28 +1,26 @@ -#/* -#* board/mx1ads/Makefile -#* -#* (c) Copyright 2004 -#* Techware Information Technology, Inc. -#* http://www.techware.com.tw/ -#* -#* Ming-Len Wu -#* -#* This program is free software; you can redistribute it and/or -#* modify it under the terms of the GNU General Public License as -#* published by the Free Software Foundation; either version 2 of -#* the License, or (at your option) any later version. -#* -#* This program is distributed in the hope that it will be useful, -#* but WITHOUT ANY WARRANTY; without even the implied warranty of -#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#* GNU General Public License for more details. -#* -#* You should have received a copy of the GNU General Public License -#* along with this program; if not, write to the Free Software -#* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -#* MA 02111-1307 USA -#*/ - +# +# board/mx1ads/Makefile +# +# (c) Copyright 2004 +# Techware Information Technology, Inc. +# http://www.techware.com.tw/ +# +# Ming-Len Wu +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA include $(TOPDIR)/config.mk diff --git a/board/mx1ads/config.mk b/board/mx1ads/config.mk index 16a0b84b2e..f6ac40d34a 100644 --- a/board/mx1ads/config.mk +++ b/board/mx1ads/config.mk @@ -1,28 +1,25 @@ -#/* -#* board/mx1ads/config.mk -#* -#* (c) Copyright 2004 -#* Techware Information Technology, Inc. -#* http://www.techware.com.tw/ -#* -#* Ming-Len Wu -#* -#* This program is free software; you can redistribute it and/or -#* modify it under the terms of the GNU General Public License as -#* published by the Free Software Foundation; either version 2 of -#* the License, or (at your option) any later version. -#* -#* This program is distributed in the hope that it will be useful, -#* but WITHOUT ANY WARRANTY; without even the implied warranty of -#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#* GNU General Public License for more details. -#* -#* You should have received a copy of the GNU General Public License -#* along with this program; if not, write to the Free Software -#* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -#* MA 02111-1307 USA -#*/ - +# +# board/mx1ads/config.mk +# +# (c) Copyright 2004 +# Techware Information Technology, Inc. +# http://www.techware.com.tw/ +# +# Ming-Len Wu +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA TEXT_BASE = 0x08400000 - diff --git a/board/mx1ads/memsetup.S b/board/mx1ads/memsetup.S index 39b71fefe4..1b06fa3c4d 100644 --- a/board/mx1ads/memsetup.S +++ b/board/mx1ads/memsetup.S @@ -1,6 +1,6 @@ /* * board/mx1ads/memsetup.S - * + * * (c) Copyright 2004 * Techware Information Technology, Inc. * http://www.techware.com.tw/ @@ -49,7 +49,7 @@ memsetup: /* Issue Precharge All Commad */ ldr r3, =0x8200000 ldr r2, [r3] - + /* Set AutoRefresh Command */ ldr r3, =0xA2120200 str r3, [r1] @@ -64,11 +64,11 @@ memsetup: ldr r2, [r3] ldr r2, [r3] ldr r2, [r3] - + /* Set Mode Register */ ldr r3, =0xB2120200 str r3, [r1] - + /* Issue Mode Register Command */ ldr r3, =0x08111800 /* Mode Register Value */ ldr r2, [r3] @@ -79,4 +79,3 @@ memsetup: /* everything is fine now */ mov pc, lr - diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c index 567f88a7b2..453e4bb0a0 100644 --- a/board/mx1ads/mx1ads.c +++ b/board/mx1ads/mx1ads.c @@ -1,6 +1,6 @@ /* * board/mx1ads/mx1ads.c - * + * * (c) Copyright 2004 * Techware Information Technology, Inc. * http://www.techware.com.tw/ @@ -61,7 +61,7 @@ static inline void delay (unsigned long loops) { "bne 1b":"=r" (loops):"0" (loops)); } -#endif +#endif /* * Miscellaneous platform dependent initialisations @@ -76,7 +76,7 @@ void SetAsynchMode(void) { "mcr p15,0,r0,c1,c0,0 \n" ); } - + static u32 mc9328sid; int board_init (void) { @@ -88,16 +88,13 @@ int board_init (void) { mc9328sid = MX1_SIDR; MX1_GPCR = 0x000003AB; /* I/O pad driving strength */ - + /* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */ /* MX1_CS1L = 0x11110601; */ - MX1_MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */ -/* MX1_MPCTL0 = 0x003f1437; *//* setting for 192 MHz MCU PLL CLK */ - - +/* MX1_MPCTL0 = 0x003f1437; */ /* setting for 192 MHz MCU PLL CLK */ /* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and * BCLK divider to 2 (i.e. BCLK to 48 MHz) @@ -108,13 +105,13 @@ int board_init (void) { MX1_CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */ /* setup cs4 for cs8900 ethernet */ - + MX1_CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */ MX1_CS4L = 0x00001501; - + MX1_GIUS_A &= 0xFF3FFFFF; MX1_GPR_A &= 0xFF3FFFFF; - + tmp = *(unsigned int *)(0x1500000C); tmp = *(unsigned int *)(0x1500000C); @@ -135,9 +132,9 @@ int board_init (void) { /* set PERCLKs */ MX1_PCDR = 0x00000055; /* set PERCLKS */ - -/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes - * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place + +/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes + * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place * all sources selected as normal interrupt */ MX1_INTTYPEH = 0; @@ -154,24 +151,24 @@ int board_late_init(void) { switch (mc9328sid) { case 0x0005901d : - printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",mc9328sid); + printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",mc9328sid); break; case 0x04d4c01d : - printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",mc9328sid); + printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",mc9328sid); break; case 0x00d4c01d : - printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",mc9328sid); + printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",mc9328sid); break; default : - printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid); + printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid); break; - + } - + return 0; -} - +} + int dram_init (void) { DECLARE_GLOBAL_DATA_PTR; diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c index fc1d7f6ce2..09fc0f86e4 100644 --- a/board/mx1ads/syncflash.c +++ b/board/mx1ads/syncflash.c @@ -1,6 +1,6 @@ /* * board/mx1ads/syncflash.c - * + * * (c) Copyright 2004 * Techware Information Technology, Inc. * http://www.techware.com.tw/ @@ -61,7 +61,7 @@ u32 SF_SR(void) { reg_SFCTL = CMD_PROGRAM; tmp = __REG(CFG_FLASH_BASE); - + reg_SFCTL = CMD_NORMAL; reg_SFCTL = CMD_LCR; /* Activate LCR Mode */ @@ -97,7 +97,7 @@ void SF_PrechargeAll(void) { u32 tmp; reg_SFCTL = CMD_PREC; /* Set Precharge Command */ - tmp = __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */ + tmp = __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */ } @@ -105,7 +105,7 @@ void SF_PrechargeAll(void) { void SF_Normal(void) { SF_PrechargeAll(); - + reg_SFCTL = CMD_NORMAL; } @@ -118,10 +118,10 @@ void SF_Erase(u32 RowAddress) { reg_SFCTL = CMD_PREC; tmp = __REG(RowAddress); - + reg_SFCTL = CMD_LCR; /* Set LCR mode */ __REG(RowAddress + LCR_ERASE_CONFIRM) = 0; /* Issue Erase Setup Command */ - + reg_SFCTL = CMD_NORMAL; /* return to Normal mode */ __REG(RowAddress) = 0xD0D0D0D0; /* Confirm */ @@ -134,7 +134,7 @@ void SF_NvmodeErase(void) { reg_SFCTL = CMD_LCR; /* Set to LCR mode */ __REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE) = 0; /* Issue Erase Nvmode Reg Command */ - + reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */ __REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0; /* Confirm */ @@ -146,7 +146,7 @@ void SF_NvmodeWrite(void) { reg_SFCTL = CMD_LCR; /* Set to LCR mode */ __REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0; /* Issue Program Nvmode reg command */ - + reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */ __REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; /* Confirm not needed */ @@ -168,11 +168,11 @@ ulong flash_init(void) { tmp = __REG(MODE_REG_VAL); /* Issue Load Mode Register Command */ SF_Normal(); - + i = 0; flash_info[i].flash_id = FLASH_MAN_MT | FLASH_MT28S4M16LC; - + flash_info[i].size = FLASH_BANK_SIZE; flash_info[i].sector_count = CFG_MAX_FLASH_SECT; @@ -181,7 +181,7 @@ ulong flash_init(void) { for (j = 0; j < flash_info[i].sector_count; j++) { flash_info[i].start[j] = CFG_FLASH_BASE + j * 0x00100000; } - + flash_protect(FLAG_PROTECT_SET, CFG_FLASH_BASE, CFG_FLASH_BASE + monitor_flash_len - 1, @@ -208,8 +208,8 @@ void flash_print_info (flash_info_t *info) { printf("Unknown Vendor "); break; } - - + + switch (info->flash_id & FLASH_TYPEMASK) { case (FLASH_MT28S4M16LC & FLASH_TYPEMASK): printf("2x FLASH_MT28S4M16LC (16MB Total)\n"); @@ -226,13 +226,13 @@ void flash_print_info (flash_info_t *info) { printf(" Sector Start Addresses: "); for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) + if ((i % 5) == 0) printf ("\n "); printf (" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " "); } - + printf ("\n"); } @@ -248,19 +248,19 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) { if (info->flash_id == FLASH_UNKNOWN) return ERR_UNKNOWN_FLASH_TYPE; - if ((s_first < 0) || (s_first > s_last)) + if ((s_first < 0) || (s_first > s_last)) return ERR_INVAL; - if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK)) + if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK)) return ERR_UNKNOWN_FLASH_VENDOR; prot = 0; for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) + if (info->protect[sect]) prot++; } - + if (prot) { printf("protected!\n"); return ERR_PROTECTED; @@ -279,7 +279,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) { /* Start erase on unprotected sectors */ for (sect = s_first; sect <= s_last && !ctrlc(); sect++) { - + printf("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ @@ -307,8 +307,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) { return rc; } - - /*----------------------------------------------------------------------- * Copy memory to flash. */ @@ -316,7 +314,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) { int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { int i; - for(i = 0; i < cnt; i += 4) { + for(i = 0; i < cnt; i += 4) { SF_PrechargeAll(); @@ -327,6 +325,6 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { } SF_Normal(); - + return ERR_OK; } diff --git a/board/mx1ads/u-boot.lds b/board/mx1ads/u-boot.lds index 946994d507..53743cdb80 100644 --- a/board/mx1ads/u-boot.lds +++ b/board/mx1ads/u-boot.lds @@ -1,6 +1,6 @@ /* * board/mx1ads/u-boot.lds - * + * * (c) Copyright 2004 * Techware Information Technology, Inc. * http://www.techware.com.tw/ diff --git a/board/pm520/flash.c b/board/pm520/flash.c index 4ea8b36463..572cc9bbeb 100644 --- a/board/pm520/flash.c +++ b/board/pm520/flash.c @@ -83,12 +83,18 @@ unsigned long flash_init (void) { int i; ulong size = 0; + extern void flash_preinit(void); + extern void flash_afterinit(ulong, ulong); + ulong flashbase = CFG_FLASH_BASE; + + flash_preinit(); for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { switch (i) { case 0: - flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[i]); - flash_get_offsets (CFG_FLASH_BASE, &flash_info[i]); + memset(&flash_info[i], 0, sizeof(flash_info_t)); + flash_get_size ((FPW *) flashbase, &flash_info[i]); + flash_get_offsets (flash_info[i].start[0], &flash_info[i]); break; default: panic ("configured to many flash banks!\n"); @@ -99,14 +105,22 @@ unsigned long flash_init (void) /* Protect monitor and environment sectors */ +#if CFG_MONITOR_BASE >= CFG_FLASH_BASE +#ifndef CONFIG_BOOT_ROM flash_protect ( FLAG_PROTECT_SET, CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0] ); +#endif +#endif +#ifdef CFG_ENV_IS_IN_FLASH flash_protect ( FLAG_PROTECT_SET, CFG_ENV_ADDR, CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] ); +#endif + + flash_afterinit(flash_info[0].start[0], flash_info[0].size); return size; } @@ -195,6 +209,8 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) addr[0x5555] = (FPW) 0x00900090; mb (); + udelay(100); + value = addr[0]; switch (value) { @@ -220,18 +236,21 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) info->flash_id += FLASH_28F128J3A; info->sector_count = 128; info->size = 0x02000000; + info->start[0] = CFG_FLASH_BASE; break; /* => 32 MB */ case (FPW) INTEL_ID_28F640J3A: info->flash_id += FLASH_28F640J3A; info->sector_count = 64; info->size = 0x01000000; + info->start[0] = CFG_FLASH_BASE + 0x01000000; break; /* => 16 MB */ case (FPW) INTEL_ID_28F320J3A: info->flash_id += FLASH_28F320J3A; info->sector_count = 32; - info->size = 0x00800000; + info->size = 0x800000; + info->start[0] = CFG_FLASH_BASE + 0x01800000; break; /* => 8 MB */ default: diff --git a/board/pm520/mt46v16m16-75.h b/board/pm520/mt46v16m16-75.h new file mode 100644 index 0000000000..f650faaa10 --- /dev/null +++ b/board/pm520/mt46v16m16-75.h @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define SDRAM_DDR 1 /* is DDR */ + +#if defined(CONFIG_MPC5200) +/* Settings for XLB = 132 MHz */ +#define SDRAM_MODE 0x018D0000 +#define SDRAM_EMODE 0x40090000 +#define SDRAM_CONTROL 0x714f0f00 +#define SDRAM_CONFIG1 0x73722930 +#define SDRAM_CONFIG2 0x47770000 +#define SDRAM_TAPDELAY 0x10000000 + +#else +#error CONFIG_MPC5200 not defined +#endif diff --git a/board/pm520/mt48lc16m16a2-75.h b/board/pm520/mt48lc16m16a2-75.h new file mode 100644 index 0000000000..ffdf0396a5 --- /dev/null +++ b/board/pm520/mt48lc16m16a2-75.h @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define SDRAM_DDR 0 /* is SDR */ + +#if defined(CONFIG_MPC5200) +/* Settings for XLB = 132 MHz */ +#define SDRAM_MODE 0x00CD0000 +#define SDRAM_CONTROL 0x504F0000 +#define SDRAM_CONFIG1 0xD2322800 +#define SDRAM_CONFIG2 0x8AD70000 + +#elif defined(CONFIG_MGT5100) +/* Settings for XLB = 66 MHz */ +#define SDRAM_MODE 0x008D0000 +#define SDRAM_CONTROL 0x504F0000 +#define SDRAM_CONFIG1 0xC2222600 +#define SDRAM_CONFIG2 0x88B70004 +#define SDRAM_ADDRSEL 0x02000000 + +#else +#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined +#endif diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c index bb0268f48b..54f59f59a7 100644 --- a/board/pm520/pm520.c +++ b/board/pm520/pm520.c @@ -2,6 +2,9 @@ * (C) Copyright 2003-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * * See file CREDITS for list of people who contributed to this * project. * @@ -25,127 +28,209 @@ #include #include -#ifndef CFG_RAMBOOT -static long int dram_size(long int *base, long int maxsize) -{ - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); -} +#if defined(CONFIG_MPC5200_DDR) +#include "mt46v16m16-75.h" +#else +#include "mt48lc16m16a2-75.h" +#endif +#ifndef CFG_RAMBOOT static void sdram_start (int hi_addr) { long hi_addr_bit = hi_addr ? 0x01000000 : 0; /* unlock mode register */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0000 | hi_addr_bit; + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; + __asm__ volatile ("sync"); + /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit; - /* set mode register */ -#if defined(CONFIG_MPC5200) - *(vu_long *)MPC5XXX_SDRAM_MODE = 0x408d0000; -#elif defined(CONFIG_MGT5100) - *(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000; + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + +#if SDRAM_DDR + /* set mode register: extended mode */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; + __asm__ volatile ("sync"); + + /* set mode register: reset DLL */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; + __asm__ volatile ("sync"); #endif + /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit; + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + /* auto refresh */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0004 | hi_addr_bit; + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; + __asm__ volatile ("sync"); + /* set mode register */ - *(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000; + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; + __asm__ volatile ("sync"); + /* normal operation */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0x504f0000 | hi_addr_bit; + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; + __asm__ volatile ("sync"); } #endif +/* + * ATTENTION: Although partially referenced initdram does NOT make real use + * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE + * is something else than 0x00000000. + */ + +#if defined(CONFIG_MPC5200) long int initdram (int board_type) { ulong dramsize = 0; + ulong dramsize2 = 0; #ifndef CFG_RAMBOOT ulong test1, test2; - /* configure SDRAM start/end */ -#if defined(CONFIG_MPC5200) + /* setup SDRAM chip selects */ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */ + __asm__ volatile ("sync"); /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2233a00; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004; + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + __asm__ volatile ("sync"); + +#if SDRAM_DDR + /* set tap delay */ + *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; + __asm__ volatile ("sync"); +#endif + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); + sdram_start(1); + test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) { + dramsize = 0; + } + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; + } else { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + } + + /* let SDRAM CS1 start right after CS0 */ + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */ + + /* find RAM size using SDRAM CS1 only */ + sdram_start(0); + test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000); + sdram_start(1); + test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000); + if (test1 > test2) { + sdram_start(0); + dramsize2 = test1; + } else { + dramsize2 = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize2 < (1 << 20)) { + dramsize2 = 0; + } + + /* set SDRAM CS1 size according to the amount of RAM found */ + if (dramsize2 > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1); + } else { + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ + } + +#else /* CFG_RAMBOOT */ + + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) { + dramsize = (1 << (dramsize - 0x13)) << 20; + } else { + dramsize = 0; + } + + /* retrieve size of memory connected to SDRAM CS1 */ + dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; + if (dramsize2 >= 0x13) { + dramsize2 = (1 << (dramsize2 - 0x13)) << 20; + } else { + dramsize2 = 0; + } + +#endif /* CFG_RAMBOOT */ + + return dramsize + dramsize2; +} #elif defined(CONFIG_MGT5100) + +long int initdram (int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + + /* setup and enable SDRAM chip selects */ *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */ *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ + __asm__ volatile ("sync"); /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2222600; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004; + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; /* address select register */ - *(vu_long *)MPC5XXX_SDRAM_XLBSEL = 0x03000000; -#endif + *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL; + __asm__ volatile ("sync"); + + /* find RAM size */ sdram_start(0); - test1 = dram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); + test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); sdram_start(1); - test2 = dram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); + test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); if (test1 > test2) { sdram_start(0); dramsize = test1; } else { dramsize = test2; } -#if defined(CONFIG_MPC5200) - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = - (0x13 + __builtin_ffs(dramsize >> 20) - 1); - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ -#elif defined(CONFIG_MGT5100) + + /* set SDRAM end address according to size */ *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); -#endif -#else -#ifdef CONFIG_MGT5100 - *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ +#else /* CFG_RAMBOOT */ + + /* Retrieve amount of SDRAM available */ dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); -#else - dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20); -#endif + #endif /* CFG_RAMBOOT */ - /* return total ram size */ + return dramsize; } +#else +#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined +#endif + int checkboard (void) { #if defined(CONFIG_MPC5200) @@ -171,14 +256,32 @@ void flash_preinit(void) *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ } -void flash_afterinit(ulong size) +void flash_afterinit(ulong start, ulong size) { - if (size == 0x800000) { /* adjust mapping */ - *(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START = - START_REG(CFG_BOOTCS_START | size); - *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP = - STOP_REG(CFG_BOOTCS_START | size, size); - } +#if defined(CONFIG_BOOT_ROM) + /* adjust mapping */ + *(vu_long *)MPC5XXX_CS1_START = + START_REG(start); + *(vu_long *)MPC5XXX_CS1_STOP = + STOP_REG(start, size); +#else + /* adjust mapping */ + *(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START = + START_REG(start); + *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP = + STOP_REG(start, size); +#endif +} + + +extern flash_info_t flash_info[]; /* info for FLASH chips */ + +int misc_init_r (void) +{ + DECLARE_GLOBAL_DATA_PTR; + /* adjust flash start */ + gd->bd->bi_flashstart = flash_info[0].start[0]; + return (0); } #ifdef CONFIG_PCI @@ -191,3 +294,26 @@ void pci_init_board(void) pci_mpc5xxx_init(&hose); } #endif + +#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) + +void init_ide_reset (void) +{ + debug ("init_ide_reset\n"); + +} + +void ide_set_reset (int idereset) +{ + debug ("ide_reset(%d)\n", idereset); + +} +#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ + +#if (CONFIG_COMMANDS & CFG_CMD_DOC) +extern void doc_probe (ulong physadr); +void doc_init (void) +{ + doc_probe (CFG_DOC_BASE); +} +#endif diff --git a/common/env_nand.c b/common/env_nand.c index 2412b109d7..516aed7326 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -78,7 +78,7 @@ char * env_name_spec = "NAND"; extern uchar environment[]; env_t *env_ptr = (env_t *)(&environment[0]); #else /* ! ENV_IS_EMBEDDED */ -env_t *env_ptr = 0; //(env_t *)CFG_ENV_ADDR; +env_t *env_ptr = 0; #endif /* ENV_IS_EMBEDDED */ diff --git a/cpu/mc9328/Makefile b/cpu/mc9328/Makefile index 0261ba6e7b..fccc6ab912 100644 --- a/cpu/mc9328/Makefile +++ b/cpu/mc9328/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(CPU).a START = start.o -OBJS = serial.o interrupts.o cpu.o +OBJS = serial.o interrupts.o cpu.o all: .depend $(START) $(LIB) diff --git a/cpu/mc9328/interrupts.c b/cpu/mc9328/interrupts.c index 3a922cfc4f..2407db609f 100644 --- a/cpu/mc9328/interrupts.c +++ b/cpu/mc9328/interrupts.c @@ -243,8 +243,7 @@ unsigned long long get_ticks(void) * This function is derived from PowerPC code (timebase clock frequency). * On ARM it returns the number of timer ticks per second. */ - + ulong get_tbclk (void) { return CFG_HZ; } - diff --git a/cpu/mc9328/serial.c b/cpu/mc9328/serial.c index 45b6f8afd4..8dcfb80274 100644 --- a/cpu/mc9328/serial.c +++ b/cpu/mc9328/serial.c @@ -1,6 +1,6 @@ /* - * cpu/mc9328/serial.c - * + * cpu/mc9328/serial.c + * * (c) Copyright 2004 * Techware Information Technology, Inc. * http://www.techware.com.tw/ @@ -23,11 +23,10 @@ * MA 02111-1307 USA */ - #include #include -#if defined(CONFIG_UART1) +#if defined(CONFIG_UART1) /* GPIO PORT B */ #define reg_GIUS MX1_GIUS_C @@ -35,7 +34,6 @@ #define GPIO_MASK 0xFFFFE1FF #define UART_BASE 0x00206000 - #elif defined (CONFIG_UART2) /* GPIO PORT C */ @@ -44,7 +42,7 @@ #define GPIO_MASK 0x0FFFFFFF #define UART_BASE 0x207000 -#endif +#endif #define reg_URXD (*((volatile u32 *)(UART_BASE+0x00))) #define reg_UTXD (*((volatile u32 *)(UART_BASE+0x40))) @@ -64,16 +62,13 @@ #define TXFE_MASK 0x4000 /* Tx buffer empty */ #define RDR_MASK 0x0001 /* receive data ready */ - void serial_setbrg (void) { -/* config I/O pins for UART */ - + /* config I/O pins for UART */ reg_GIUS &= GPIO_MASK; reg_GPR &= GPIO_MASK; -/* config UART */ - + /* config UART */ reg_UCR1 = 5; reg_UCR2 = 0x4027; reg_UCR4 = 1; @@ -84,22 +79,18 @@ void serial_setbrg (void) { reg_UBRC = 8; } - - /* * Initialise the serial port with the given baudrate. The settings * are always 8 data bits, no parity, 1 stop bit, no start bits. * */ - + int serial_init (void) { serial_setbrg (); return (0); } - - /* * Read a single byte from the serial port. Returns 1 on success, 0 * otherwise. When the function is succesfull, the character read is @@ -112,7 +103,6 @@ int serial_getc (void) { return (u8)reg_URXD; } - /* * Output a single byte to the serial port. */ @@ -129,7 +119,6 @@ void serial_putc (const char c) { } - /* * Test whether a character is in the RX buffer */ @@ -137,10 +126,8 @@ int serial_tstc (void) { return reg_USR2 & RDR_MASK; } - void serial_puts (const char *s) { while (*s) { serial_putc (*s++); } } - diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index 66f978ebc2..5a00133775 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -59,10 +59,13 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_DATE | \ CFG_CMD_DHCP | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ CFG_CMD_PCI | \ - 0 /* CFG_CMD_DATE */ ) + CFG_CMD_SDRAM ) /* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ @@ -77,17 +80,17 @@ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #if 1 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #endif #ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_PROMPT_HUSH_PS2 "> " #endif /* Print Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) -#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x00100000 /* Default load address */ @@ -97,29 +100,29 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_BASE 0x00000000 #if defined(CONFIG_BOOT_ROM) -#define CFG_FLASH_BASE 0xFF000000 +#define CFG_FLASH_BASE 0xFF000000 #else -#define CFG_FLASH_BASE 0xFF800000 +#define CFG_FLASH_BASE 0xFF800000 #endif -#define CFG_RESET_ADDRESS 0xFFF00100 +#define CFG_RESET_ADDRESS 0xFFF00100 -#define CFG_EUMB_ADDR 0xFCE00000 +#define CFG_EUMB_ADDR 0xFCE00000 -#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_MEMTEST_START 0x00004000 /* memtest works on */ -#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ +#define CFG_MEMTEST_START 0x00004000 /* memtest works on */ +#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - /* Maximum amount of RAM. - */ -#define CFG_MAX_RAM_SIZE 0x10000000 +/* Maximum amount of RAM. + */ +#define CFG_MAX_RAM_SIZE 0x10000000 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE @@ -133,13 +136,13 @@ * Definitions for initial stack pointer and data area */ - /* Size in bytes reserved for initial data - */ -#define CFG_GBL_DATA_SIZE 128 +/* Size in bytes reserved for initial data + */ +#define CFG_GBL_DATA_SIZE 128 -#define CFG_INIT_RAM_ADDR 0x40000000 -#define CFG_INIT_RAM_END 0x1000 -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_RAM_ADDR 0x40000000 +#define CFG_INIT_RAM_END 0x1000 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) /* * NS16550 Configuration @@ -153,7 +156,30 @@ #define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500) #define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600) -#define DUART_DCR (CFG_EUMB_ADDR + 0x4511) +#define DUART_DCR (CFG_EUMB_ADDR + 0x4511) + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ + +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * RTC configuration + */ +#define CONFIG_RTC_PCF8563 +#define CFG_I2C_RTC_ADDR 0x51 + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR 0x58 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 /* * Low Level Configuration Settings @@ -162,62 +188,49 @@ * For the detail description refer to the MPC8240 user's manual. */ -#define CONFIG_SYS_CLK_FREQ 33000000 -#define CFG_HZ 1000 -/* - * SDRAM Configuration Settings - * Please note: currently only 64 and 128 MB SDRAM size supported - * set CFG_SDRAM_SIZE to 64 or 128 - * Memory configuration using SPD information stored on the SODIMMs - * not yet supported. - */ +#define CONFIG_SYS_CLK_FREQ 33000000 +#define CFG_HZ 1000 -#define CFG_SDRAM_SIZE 64 /* SDRAM size -- 64 or 128 MB supported */ - /* Bit-field values for MCCR1. - */ -#define CFG_ROMNAL 0 -#define CFG_ROMFAL 7 +/* Bit-field values for MCCR1. + */ +#define CFG_ROMNAL 0 +#define CFG_ROMFAL 8 + +#define CFG_BANK0_ROW 0 /* SDRAM bank 7-0 row address */ +#define CFG_BANK1_ROW 0 +#define CFG_BANK2_ROW 0 +#define CFG_BANK3_ROW 0 +#define CFG_BANK4_ROW 0 +#define CFG_BANK5_ROW 0 +#define CFG_BANK6_ROW 0 +#define CFG_BANK7_ROW 0 + +/* Bit-field values for MCCR2. + */ -#if (CFG_SDRAM_SIZE == 64) /* 64 MB */ -#define CFG_BANK0_ROW 0 /* SDRAM bank 7-0 row address */ -#elif (CFG_SDRAM_SIZE == 128) /* 128 MB */ -#define CFG_BANK0_ROW 2 /* SDRAM bank 7-0 row address */ -#else -# error "SDRAM size not supported" -#endif -#define CFG_BANK1_ROW 0 -#define CFG_BANK2_ROW 0 -#define CFG_BANK3_ROW 0 -#define CFG_BANK4_ROW 0 -#define CFG_BANK5_ROW 0 -#define CFG_BANK6_ROW 0 -#define CFG_BANK7_ROW 0 - - /* Bit-field values for MCCR2. - */ -#define CFG_REFINT 430 /* Refresh interval */ +#define CFG_REFINT 0x2ec - /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. - */ -#define CFG_BSTOPRE 192 +/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. + */ +#define CFG_BSTOPRE 160 - /* Bit-field values for MCCR3. - */ -#define CFG_REFREC 2 /* Refresh to activate interval */ -#define CFG_RDLAT 3 /* Data latancy from read command */ +/* Bit-field values for MCCR3. + */ +#define CFG_REFREC 2 /* Refresh to activate interval */ +#define CFG_RDLAT 0 /* Data latancy from read command */ - /* Bit-field values for MCCR4. - */ -#define CFG_PRETOACT 2 /* Precharge to activate interval */ -#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */ -#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */ -#define CFG_ACTORW 2 +/* Bit-field values for MCCR4. + */ +#define CFG_PRETOACT 2 /* Precharge to activate interval */ +#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */ +#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */ +#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */ +#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */ +#define CFG_ACTORW 2 #define CFG_REGISTERD_TYPE_BUFFER 1 -#define CFG_EXTROM 1 -#define CFG_REGDIMM 0 +#define CFG_EXTROM 0 +#define CFG_REGDIMM 0 /* Memory bank settings. * Only bits 20-29 are actually used from these vales to set the @@ -226,32 +239,35 @@ * address. Refer to the MPC8240 book. */ -#define CFG_BANK0_START 0x00000000 -#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1) -#define CFG_BANK0_ENABLE 1 -#define CFG_BANK1_START 0x3ff00000 -#define CFG_BANK1_END 0x3fffffff -#define CFG_BANK1_ENABLE 0 -#define CFG_BANK2_START 0x3ff00000 -#define CFG_BANK2_END 0x3fffffff -#define CFG_BANK2_ENABLE 0 -#define CFG_BANK3_START 0x3ff00000 -#define CFG_BANK3_END 0x3fffffff -#define CFG_BANK3_ENABLE 0 -#define CFG_BANK4_START 0x3ff00000 -#define CFG_BANK4_END 0x3fffffff -#define CFG_BANK4_ENABLE 0 -#define CFG_BANK5_START 0x3ff00000 -#define CFG_BANK5_END 0x3fffffff -#define CFG_BANK5_ENABLE 0 -#define CFG_BANK6_START 0x3ff00000 -#define CFG_BANK6_END 0x3fffffff -#define CFG_BANK6_ENABLE 0 -#define CFG_BANK7_START 0x3ff00000 -#define CFG_BANK7_END 0x3fffffff -#define CFG_BANK7_ENABLE 0 - -#define CFG_ODCR 0xff +#define CFG_BANK0_START 0x00000000 +#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1) +#define CFG_BANK0_ENABLE 1 +#define CFG_BANK1_START 0x3ff00000 +#define CFG_BANK1_END 0x3fffffff +#define CFG_BANK1_ENABLE 0 +#define CFG_BANK2_START 0x3ff00000 +#define CFG_BANK2_END 0x3fffffff +#define CFG_BANK2_ENABLE 0 +#define CFG_BANK3_START 0x3ff00000 +#define CFG_BANK3_END 0x3fffffff +#define CFG_BANK3_ENABLE 0 +#define CFG_BANK4_START 0x3ff00000 +#define CFG_BANK4_END 0x3fffffff +#define CFG_BANK4_ENABLE 0 +#define CFG_BANK5_START 0x3ff00000 +#define CFG_BANK5_END 0x3fffffff +#define CFG_BANK5_ENABLE 0 +#define CFG_BANK6_START 0x3ff00000 +#define CFG_BANK6_END 0x3fffffff +#define CFG_BANK6_ENABLE 0 +#define CFG_BANK7_START 0x3ff00000 +#define CFG_BANK7_END 0x3fffffff +#define CFG_BANK7_ENABLE 0 + +#define CFG_ODCR 0xff +#define CFG_PGMAX 0x32 /* how long the 8240 retains the */ + /* currently accessed page in memory */ + /* see 8240 book for details */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) @@ -279,7 +295,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization @@ -295,7 +311,7 @@ */ #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x7C0000) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x7F8000) #define CFG_ENV_SIZE 0x4000 /* Size of the Environment */ #define CFG_ENV_OFFSET 0 /* starting right at the beginning */ #define CFG_ENV_SECT_SIZE 0x8000 /* Size of the Environment Sector */ @@ -317,118 +333,118 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define SRAM_BASE 0x80000000 /* SRAM base address */ -#define SRAM_END 0x801FFFFF +#define SRAM_BASE 0x80000000 /* SRAM base address */ +#define SRAM_END 0x801FFFFF -/*---------------------------------------------------------------------*/ -/* CPC45 Memory Map */ -/*---------------------------------------------------------------------*/ -#define SRAM_BASE 0x80000000 /* SRAM base address */ -#define ST16552_A_BASE 0x80200000 /* ST16552 channel A */ -#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */ -#define BCSR_BASE 0x80600000 /* board control / status registers */ -#define DISPLAY_BASE 0x80600040 /* DISPLAY base */ -#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */ -#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */ +/*----------------------------------------------------------------------*/ +/* CPC45 Memory Map */ +/*----------------------------------------------------------------------*/ +#define SRAM_BASE 0x80000000 /* SRAM base address */ +#define ST16552_A_BASE 0x80200000 /* ST16552 channel A */ +#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */ +#define BCSR_BASE 0x80600000 /* board control / status registers */ +#define DISPLAY_BASE 0x80600040 /* DISPLAY base */ +#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */ +#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */ /*---------------------------------------------------------------------*/ -/* CPC45 Control/Status Registers */ +/* CPC45 Control/Status Registers */ /*---------------------------------------------------------------------*/ -#define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00)) -#define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01)) -#define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02)) -#define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03)) -#define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04)) -#define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05)) -#define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06)) -#define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06)) -#define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06)) -#define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07)) +#define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00)) +#define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01)) +#define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02)) +#define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03)) +#define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04)) +#define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05)) +#define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06)) +#define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06)) +#define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06)) +#define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07)) /* IRQ_ENA_1 bit definitions */ -#define I_ENA_1_IERA 0x80 /* INTA enable */ -#define I_ENA_1_IERB 0x40 /* INTB enable */ -#define I_ENA_1_IERC 0x20 /* INTC enable */ -#define I_ENA_1_IERD 0x10 /* INTD enable */ +#define I_ENA_1_IERA 0x80 /* INTA enable */ +#define I_ENA_1_IERB 0x40 /* INTB enable */ +#define I_ENA_1_IERC 0x20 /* INTC enable */ +#define I_ENA_1_IERD 0x10 /* INTD enable */ /* IRQ_STAT_1 bit definitions */ -#define I_STAT_1_INTA 0x80 /* INTA status */ -#define I_STAT_1_INTB 0x40 /* INTB status */ -#define I_STAT_1_INTC 0x20 /* INTC status */ -#define I_STAT_1_INTD 0x10 /* INTD status */ +#define I_STAT_1_INTA 0x80 /* INTA status */ +#define I_STAT_1_INTB 0x40 /* INTB status */ +#define I_STAT_1_INTC 0x20 /* INTC status */ +#define I_STAT_1_INTD 0x10 /* INTD status */ /* IRQ_ENA_2 bit definitions */ -#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */ -#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */ -#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */ -#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */ -#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */ -#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */ -#define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */ -#define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */ +#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */ +#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */ +#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */ +#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */ +#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */ +#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */ +#define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */ +#define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */ /* IRQ_STAT_2 bit definitions */ -#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */ -#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */ -#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */ -#define I_STAT_2_RTC 0x10 /* RTC IRQ status */ -#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */ -#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */ -#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */ -#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */ +#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */ +#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */ +#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */ +#define I_STAT_2_RTC 0x10 /* RTC IRQ status */ +#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */ +#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */ +#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */ +#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */ /* BOARD_CTRL bit definitions */ -#define USER_LEDS 2 /* 2 user LEDs */ +#define USER_LEDS 2 /* 2 user LEDs */ #if (USER_LEDS == 4) -#define B_CTRL_WRSE 0x80 -#define B_CTRL_KRSE 0x40 -#define B_CTRL_FWRE 0x20 /* Flash write enable */ -#define B_CTRL_FWPT 0x10 /* Flash write protect */ -#define B_CTRL_LED3 0x08 /* LED 3 control */ -#define B_CTRL_LED2 0x04 /* LED 2 control */ -#define B_CTRL_LED1 0x02 /* LED 1 control */ -#define B_CTRL_LED0 0x01 /* LED 0 control */ +#define B_CTRL_WRSE 0x80 +#define B_CTRL_KRSE 0x40 +#define B_CTRL_FWRE 0x20 /* Flash write enable */ +#define B_CTRL_FWPT 0x10 /* Flash write protect */ +#define B_CTRL_LED3 0x08 /* LED 3 control */ +#define B_CTRL_LED2 0x04 /* LED 2 control */ +#define B_CTRL_LED1 0x02 /* LED 1 control */ +#define B_CTRL_LED0 0x01 /* LED 0 control */ #else -#define B_CTRL_WRSE 0x80 -#define B_CTRL_KRSE 0x40 -#define B_CTRL_FWRE_1 0x20 /* Flash write enable */ -#define B_CTRL_FWPT_1 0x10 /* Flash write protect */ -#define B_CTRL_LED1 0x08 /* LED 1 control */ -#define B_CTRL_LED0 0x04 /* LED 0 control */ -#define B_CTRL_FWRE_0 0x02 /* Flash write enable */ -#define B_CTRL_FWPT_0 0x01 /* Flash write protect */ +#define B_CTRL_WRSE 0x80 +#define B_CTRL_KRSE 0x40 +#define B_CTRL_FWRE_1 0x20 /* Flash write enable */ +#define B_CTRL_FWPT_1 0x10 /* Flash write protect */ +#define B_CTRL_LED1 0x08 /* LED 1 control */ +#define B_CTRL_LED0 0x04 /* LED 0 control */ +#define B_CTRL_FWRE_0 0x02 /* Flash write enable */ +#define B_CTRL_FWPT_0 0x01 /* Flash write protect */ #endif /* BOARD_STAT bit definitions */ -#define B_STAT_WDGE 0x80 -#define B_STAT_WDGS 0x40 -#define B_STAT_WRST 0x20 -#define B_STAT_KRST 0x10 -#define B_STAT_CSW3 0x08 /* sitch bit 3 status */ -#define B_STAT_CSW2 0x04 /* sitch bit 2 status */ -#define B_STAT_CSW1 0x02 /* sitch bit 1 status */ -#define B_STAT_CSW0 0x01 /* sitch bit 0 status */ +#define B_STAT_WDGE 0x80 +#define B_STAT_WDGS 0x40 +#define B_STAT_WRST 0x20 +#define B_STAT_KRST 0x10 +#define B_STAT_CSW3 0x08 /* sitch bit 3 status */ +#define B_STAT_CSW2 0x04 /* sitch bit 2 status */ +#define B_STAT_CSW1 0x02 /* sitch bit 1 status */ +#define B_STAT_CSW0 0x01 /* sitch bit 0 status */ /*---------------------------------------------------------------------*/ -/* Display addresses */ +/* Display addresses */ /*---------------------------------------------------------------------*/ -#define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */ -#define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */ -#define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */ +#define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */ +#define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */ +#define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */ -#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */ -#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */ +#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */ +#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */ -#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */ -#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */ -#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */ -#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */ -#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */ -#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */ -#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */ -#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */ +#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */ +#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */ +#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */ +#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */ +#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */ +#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */ +#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */ +#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */ /*----------------------------------------------------------------------- @@ -436,14 +452,16 @@ *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ -#undef CONFIG_PCI_PNP +#undef CONFIG_PCI_PNP +#undef CONFIG_PCI_SCAN_SHOW -#define CONFIG_NET_MULTI /* Multi ethernet cards support */ +#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_EEPRO100 -#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define PCI_ENET0_IOADDR 0x00104000 +#define PCI_ENET0_IOADDR 0x82000000 #define PCI_ENET0_MEMADDR 0x82000000 -#define PCI_PLX9030_MEMADDR 0x82100000 +#define PCI_PLX9030_IOADDR 0x82100000 +#define PCI_PLX9030_MEMADDR 0x82100000 #endif /* __CONFIG_H */ diff --git a/include/configs/PM520.h b/include/configs/PM520.h index a7d30f0d75..a91662cf95 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -35,6 +35,8 @@ #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ +#define CONFIG_MISC_INIT_R + #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ @@ -82,11 +84,37 @@ #endif +/* Partitions */ +#define CONFIG_DOS_PARTITION + +/* USB */ +#if 1 +#define CONFIG_USB_OHCI +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define CONFIG_USB_STORAGE +#else +#define ADD_USB_CMD 0 +#endif + +#if defined(CONFIG_BOOT_ROM) +#define ADD_DOC_CMD 0 +#else +#define ADD_DOC_CMD CFG_CMD_DOC +#endif + /* * Supported commands */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | ADD_PCI_CMD | \ - CFG_CMD_I2C | CFG_CMD_EEPROM | CFG_CMD_DATE) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_EEPROM | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IDE | \ + ADD_DOC_CMD | \ + ADD_PCI_CMD | \ + CFG_CMD_DATE | \ + CFG_CMD_BEDBUG | \ + ADD_USB_CMD) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include @@ -95,8 +123,32 @@ * Autobooting */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=pm520\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk30/ppc_82xx\0" \ + "bootfile=/tftpboot/PM520/uImage\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" #if defined(CONFIG_MPC5200) /* @@ -128,11 +180,44 @@ #define CFG_I2C_RTC_ADDR 0x51 /* - * Flash configuration + * Disk-On-Chip configuration + */ + +#define CFG_DOC_SHORT_TIMEOUT +#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ + +#define CFG_DOC_SUPPORT_2000 +#define CFG_DOC_SUPPORT_MILLENNIUM +#define CFG_DOC_BASE 0xE0000000 +#define CFG_DOC_SIZE 0x00100000 + +#if defined(CONFIG_BOOT_ROM) +/* + * Flash configuration (8,16 or 32 MB) + * TEXT base always at 0xFFF00000 + * ENV_ADDR always at 0xFFF40000 + * FLASH_BASE at 0xFC000000 for 32 MB + * 0xFD000000 for 16 MB + * 0xFD800000 for 8 MB + */ +#define CFG_FLASH_BASE 0xfc000000 +#define CFG_FLASH_SIZE 0x02000000 +#define CFG_BOOTROM_BASE 0xFFF00000 +#define CFG_BOOTROM_SIZE 0x00080000 +#define CFG_ENV_ADDR (0xFDF00000 + 0x40000) +#else +/* + * Flash configuration (8,16 or 32 MB) + * TEXT base always at 0xFFF00000 + * ENV_ADDR always at 0xFFF40000 + * FLASH_BASE at 0xFE000000 for 32 MB + * 0xFF000000 for 16 MB + * 0xFF800000 for 8 MB */ -#define CFG_FLASH_BASE 0xff800000 -#define CFG_FLASH_SIZE 0x00800000 -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x740000) +#define CFG_FLASH_BASE 0xfe000000 +#define CFG_FLASH_SIZE 0x02000000 +#define CFG_ENV_ADDR (0xFFF00000 + 0x40000) +#endif #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ #define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ @@ -228,15 +313,68 @@ #define CFG_HID0_FINAL 0 #endif +#if defined(CONFIG_BOOT_ROM) +#define CFG_BOOTCS_START CFG_BOOTROM_BASE +#define CFG_BOOTCS_SIZE CFG_BOOTROM_SIZE +#define CFG_BOOTCS_CFG 0x00047800 +#define CFG_CS0_START CFG_BOOTROM_BASE +#define CFG_CS0_SIZE CFG_BOOTROM_SIZE +#define CFG_CS1_START CFG_FLASH_BASE +#define CFG_CS1_SIZE CFG_FLASH_SIZE +#define CFG_CS1_CFG 0x0004fb00 +#else #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE #define CFG_BOOTCS_CFG 0x0004fb00 #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE +#define CFG_CS1_START CFG_DOC_BASE +#define CFG_CS1_SIZE CFG_DOC_SIZE +#define CFG_CS1_CFG 0x00047800 +#endif #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333333 #define CFG_RESET_ADDRESS 0xff000000 +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00005000 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#undef CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + #endif /* __CONFIG_H */ diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index ff63259b5c..369842b13a 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -178,8 +178,6 @@ #define CFG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */ #endif - - /*----------------------------------------------------------------------- * Cache Configuration */ diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h index 9611d61032..46c6fdd697 100644 --- a/include/configs/Sandpoint8245.h +++ b/include/configs/Sandpoint8245.h @@ -229,7 +229,7 @@ #else #define CFG_NS16550_CLK 1843200 #endif - + #define CFG_NS16550_COM1 (CFG_ISA_IO + CFG_NS87308_UART1_BASE) #define CFG_NS16550_COM2 (CFG_ISA_IO + CFG_NS87308_UART2_BASE) #define CFG_NS16550_COM3 (CFG_EUMB_ADDR + 0x4500) diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 9d4ab2b52e..5cf092af55 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -1,6 +1,6 @@ /* * include/configs/mx1ads.h - * + * * (c) Copyright 2004 * Techware Information Technology, Inc. * http://www.techware.com.tw/ @@ -43,17 +43,17 @@ #define CONFIG_MC9328 1 /* It's a Motorola MC9328 SoC */ #define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */ -#define BOARD_LATE_INIT 1 +#define BOARD_LATE_INIT 1 #define USE_920T_MMU 1 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#if 0 +#if 0 #define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */ #define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */ #define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */ -#endif +#endif /* * Size of malloc() pool @@ -73,7 +73,7 @@ * select serial console configuration */ -#define CONFIG_UART1 1 +#define CONFIG_UART1 1 /* #define CONFIG_UART2 1 */ #define CONFIG_BAUDRATE 115200 @@ -90,13 +90,13 @@ /*CFG_CMD_I2C |*/ \ /*CFG_CMD_USB |*/ \ CFG_CMD_REGINFO | \ - CFG_CMD_ELF) + CFG_CMD_ELF) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include #define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=/dev/docbp mem=48M" +#define CONFIG_BOOTARGS "root=/dev/docbp mem=48M" #define CONFIG_ETHADDR 08:00:3e:26:0a:5c #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.0.22 @@ -113,10 +113,10 @@ /* * Miscellaneous configurable options */ - + #define CFG_HUSH_PARSER 1 #define CFG_PROMPT_HUSH_PS2 "> " - + #define CFG_LONGHELP /* undef to save memory */ #ifdef CFG_HUSH_PARSER @@ -126,7 +126,7 @@ #endif #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ @@ -158,7 +158,7 @@ /*----------------------------------------------------------------------- * Physical Memory Map */ - + #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ #define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */ @@ -178,7 +178,7 @@ #define PHYS_FLASH_SIZE 0x01000000 #define CFG_MAX_FLASH_SECT (16) #define CFG_ENV_ADDR (CFG_FLASH_BASE+0x00ff0000) - + #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 0x0f000 /* Total Size of Environment Sector */ #define CFG_ENV_SECT_SIZE 0x100000 diff --git a/include/mc9328.h b/include/mc9328.h index 5adbf2c6cd..2a6e7577fb 100644 --- a/include/mc9328.h +++ b/include/mc9328.h @@ -1,6 +1,6 @@ /* * include/mc9328.h - * + * * (c) Copyright 2004 * Techware Information Technology, Inc. * http://www.techware.com.tw/ @@ -14,7 +14,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -23,157 +23,139 @@ * MA 02111-1307 USA */ - #ifndef __MC9328_H__ #define __MC9328_H__ -typedef volatile unsigned long VU32; -typedef VU32 * P_VU32; +typedef volatile unsigned long VU32; +typedef VU32 * P_VU32; #define __REG(x) (*((volatile u32 *)(x))) - /* - * MX1 Chip selects & internal memory's + * MX1 Chip selects & internal memory's */ - - -#define MX1_DMI_PHYS 0x00000000 /* double map image */ -#define MX1_BROM_PHYS 0x00100000 /* Bootstrape ROM */ +#define MX1_DMI_PHYS 0x00000000 /* double map image */ +#define MX1_BROM_PHYS 0x00100000 /* Bootstrape ROM */ #define MX1_ESRAM_PHYS 0x00300000 /* Embedded SRAM (128KB)*/ -#define MX1_CSD0_PHYS 0x08000000 /* CSD0 64MB (SDRAM) */ -#define MX1_CSD1_PHYS 0x0C000000 /* CSD1 64MB (SDRAM) */ -#define MX1_CS0_PHYS 0x10000000 /* CS0 32MB (Flash) */ -#define MX1_CS1_PHYS 0x12000000 /* CS1 16MB (Flash) */ -#define MX1_CS2_PHYS 0x13000000 /* CS2 16MB (Ext SRAM) */ -#define MX1_CS3_PHYS 0x14000000 /* CS3 16MB (Spare) */ -#define MX1_CS4_PHYS 0x15000000 /* CS4 16MB (Spare) */ -#define MX1_CS5_PHYS 0x16000000 /* CS5 16MB (Spare) */ - - +#define MX1_CSD0_PHYS 0x08000000 /* CSD0 64MB (SDRAM) */ +#define MX1_CSD1_PHYS 0x0C000000 /* CSD1 64MB (SDRAM) */ +#define MX1_CS0_PHYS 0x10000000 /* CS0 32MB (Flash) */ +#define MX1_CS1_PHYS 0x12000000 /* CS1 16MB (Flash) */ +#define MX1_CS2_PHYS 0x13000000 /* CS2 16MB (Ext SRAM) */ +#define MX1_CS3_PHYS 0x14000000 /* CS3 16MB (Spare) */ +#define MX1_CS4_PHYS 0x15000000 /* CS4 16MB (Spare) */ +#define MX1_CS5_PHYS 0x16000000 /* CS5 16MB (Spare) */ /* - * MX1 Watchdog registers + * MX1 Watchdog registers */ - -#define MX1_WCR __REG(0x00201000) /* Watchdog Control Register */ +#define MX1_WCR __REG(0x00201000) /* Watchdog Control Register */ #define MX1_WSR __REG(0x00201004) /* Watchdog Service Register */ -#define MX1_WSTR __REG(0x00201008) /* Watchdog Status Register */ - - +#define MX1_WSTR __REG(0x00201008) /* Watchdog Status Register */ /* * MX1 Timer registers */ - -#define MX1_TCTL1 __REG(0x00202000) /* Timer 1 Control Register */ -#define MX1_TPRER1 __REG(0x00202004) /* Timer 1 Prescaler Register */ -#define MX1_TCMP1 __REG(0x00202008) /* Timer 1 Compare Register */ -#define MX1_TCR1 __REG(0x0020200C) /* Timer 1 Capture Register */ -#define MX1_TCN1 __REG(0x00202010) /* Timer 1 Counter Register */ -#define MX1_TSTAT1 __REG(0x00202014) /* Timer 1 Status Register */ - - -#define MX1_TCTL2 __REG(0x00203000) /* Timer 2 Control Register */ -#define MX1_TPRER2 __REG(0x00203004) /* Timer 2 Prescaler Register */ -#define MX1_TCMP2 __REG(0x00203008) /* Timer 2 Compare Register */ -#define MX1_TCR2 __REG(0x0020300C) /* Timer 2 Capture Register */ -#define MX1_TCN2 __REG(0x00203010) /* Timer 2 Counter Register */ -#define MX1_TSTAT2 __REG(0x00203014) /* Timer 2 Status Register */ - - +#define MX1_TCTL1 __REG(0x00202000) /* Timer 1 Control Register */ +#define MX1_TPRER1 __REG(0x00202004) /* Timer 1 Prescaler Register */ +#define MX1_TCMP1 __REG(0x00202008) /* Timer 1 Compare Register */ +#define MX1_TCR1 __REG(0x0020200C) /* Timer 1 Capture Register */ +#define MX1_TCN1 __REG(0x00202010) /* Timer 1 Counter Register */ +#define MX1_TSTAT1 __REG(0x00202014) /* Timer 1 Status Register */ + +#define MX1_TCTL2 __REG(0x00203000) /* Timer 2 Control Register */ +#define MX1_TPRER2 __REG(0x00203004) /* Timer 2 Prescaler Register */ +#define MX1_TCMP2 __REG(0x00203008) /* Timer 2 Compare Register */ +#define MX1_TCR2 __REG(0x0020300C) /* Timer 2 Capture Register */ +#define MX1_TCN2 __REG(0x00203010) /* Timer 2 Counter Register */ +#define MX1_TSTAT2 __REG(0x00203014) /* Timer 2 Status Register */ /* * MX1 RTC registers */ - -#define MX1_HOURMIN __REG(0x00204000) /* RTC Hour & Min Counter Registers */ -#define MX1_SECONDS __REG(0x00204004) /* RTC Seconds Counter Registers */ -#define MX1_ALRM_HM __REG(0x00204008) /* RTC Hour & Min Alarm Registers */ -#define MX1_ALRM_SEC __REG(0x0020400C) /* RTC Seconds Alarm Registers */ -#define MX1_RCCTL __REG(0x00204010) /* RTC Control Registers */ -#define MX1_RTCISR __REG(0x00204014) /* RTC Interrupt Status Registers */ -#define MX1_RTCIENR __REG(0x00204018) /* RTC Interrupt Enable Registers */ -#define MX1_STPWCH __REG(0x0020401C) /* RTC Stopwatch Minutes Registers */ -#define MX1_DAYR __REG(0x00204020) /* RTC Days Counter Registers */ -#define MX1_DAYALARM __REG(0x00204020) /* RTC Day Alarm Registers */ - +#define MX1_HOURMIN __REG(0x00204000) /* RTC Hour & Min Counter Registers */ +#define MX1_SECONDS __REG(0x00204004) /* RTC Seconds Counter Registers */ +#define MX1_ALRM_HM __REG(0x00204008) /* RTC Hour & Min Alarm Registers */ +#define MX1_ALRM_SEC __REG(0x0020400C) /* RTC Seconds Alarm Registers */ +#define MX1_RCCTL __REG(0x00204010) /* RTC Control Registers */ +#define MX1_RTCISR __REG(0x00204014) /* RTC Interrupt Status Registers */ +#define MX1_RTCIENR __REG(0x00204018) /* RTC Interrupt Enable Registers */ +#define MX1_STPWCH __REG(0x0020401C) /* RTC Stopwatch Minutes Registers */ +#define MX1_DAYR __REG(0x00204020) /* RTC Days Counter Registers */ +#define MX1_DAYALARM __REG(0x00204020) /* RTC Day Alarm Registers */ /* * MX1 LCD Controller registers */ - -#define MX1_SSA __REG(0x00205000) /* Screen Start Address Register */ -#define MX1_SIZE __REG(0x00205004) /* Size Register */ -#define MX1_VPW __REG(0x00205008) /* Virtual Page Width Register */ -#define MX1_CPOS __REG(0x0020500C) /* LCD Cursor Position Register */ -#define MX1_LCWHB __REG(0x00205010) /* LCD Cursor Width Height & Blink Register */ +#define MX1_SSA __REG(0x00205000) /* Screen Start Address Register */ +#define MX1_SIZE __REG(0x00205004) /* Size Register */ +#define MX1_VPW __REG(0x00205008) /* Virtual Page Width Register */ +#define MX1_CPOS __REG(0x0020500C) /* LCD Cursor Position Register */ +#define MX1_LCWHB __REG(0x00205010) /* LCD Cursor Width Height & Blink Register */ #define MX1_LCHCC __REG(0x00205014) /* LCD Color Cursor Mapping Register */ -#define MX1_PCR __REG(0x00205018) /* LCD Panel Configuration Register */ -#define MX1_HCR __REG(0x0020501C) /* Horizontal Configuration Register */ -#define MX1_VCR __REG(0x00205020) /* Vertical Configuration Register */ -#define MX1_POS __REG(0x00205024) /* Panning Offset Register */ -#define MX1_LGPMR __REG(0x00205028) /* LCD Gray Palette Mapping Register */ -#define MX1_PWMR __REG(0x0020502C) /* PWM Contrast Control Register */ -#define MX1_DMACR __REG(0x00205030) /* DMA Control Register */ -#define MX1_RMCR __REG(0x00205034) /* Refresh Mode Control Register */ -#define MX1_LCDICR __REG(0x00205038) /* Interrupt Configuration Register */ -#define MX1_LCDISR __REG(0x00205040) /* Interrupt Status Register */ - +#define MX1_PCR __REG(0x00205018) /* LCD Panel Configuration Register */ +#define MX1_HCR __REG(0x0020501C) /* Horizontal Configuration Register */ +#define MX1_VCR __REG(0x00205020) /* Vertical Configuration Register */ +#define MX1_POS __REG(0x00205024) /* Panning Offset Register */ +#define MX1_LGPMR __REG(0x00205028) /* LCD Gray Palette Mapping Register */ +#define MX1_PWMR __REG(0x0020502C) /* PWM Contrast Control Register */ +#define MX1_DMACR __REG(0x00205030) /* DMA Control Register */ +#define MX1_RMCR __REG(0x00205034) /* Refresh Mode Control Register */ +#define MX1_LCDICR __REG(0x00205038) /* Interrupt Configuration Register */ +#define MX1_LCDISR __REG(0x00205040) /* Interrupt Status Register */ /* * MX1 UART registers */ /* UART 1 */ -#define MX1_URX0D_1 __REG(0x00206000) /* UART 1 Receiver Register 0 */ -#define MX1_URX1D_1 __REG(0x00206004) /* UART 1 Receiver Register 1 */ -#define MX1_URX2D_1 __REG(0x00206008) /* UART 1 Receiver Register 2 */ -#define MX1_URX3D_1 __REG(0x0020600C) /* UART 1 Receiver Register 3 */ -#define MX1_URX4D_1 __REG(0x00206010) /* UART 1 Receiver Register 4 */ -#define MX1_URX5D_1 __REG(0x00206014) /* UART 1 Receiver Register 5 */ -#define MX1_URX6D_1 __REG(0x00206018) /* UART 1 Receiver Register 6 */ -#define MX1_URX7D_1 __REG(0x0020601C) /* UART 1 Receiver Register 7 */ -#define MX1_URX8D_1 __REG(0x00206020) /* UART 1 Receiver Register 8 */ -#define MX1_URX9D_1 __REG(0x00206024) /* UART 1 Receiver Register 9 */ -#define MX1_URX10D_1 __REG(0x00206028) /* UART 1 Receiver Register 10 */ -#define MX1_URX11D_1 __REG(0x0020602C) /* UART 1 Receiver Register 11 */ +#define MX1_URX0D_1 __REG(0x00206000) /* UART 1 Receiver Register 0 */ +#define MX1_URX1D_1 __REG(0x00206004) /* UART 1 Receiver Register 1 */ +#define MX1_URX2D_1 __REG(0x00206008) /* UART 1 Receiver Register 2 */ +#define MX1_URX3D_1 __REG(0x0020600C) /* UART 1 Receiver Register 3 */ +#define MX1_URX4D_1 __REG(0x00206010) /* UART 1 Receiver Register 4 */ +#define MX1_URX5D_1 __REG(0x00206014) /* UART 1 Receiver Register 5 */ +#define MX1_URX6D_1 __REG(0x00206018) /* UART 1 Receiver Register 6 */ +#define MX1_URX7D_1 __REG(0x0020601C) /* UART 1 Receiver Register 7 */ +#define MX1_URX8D_1 __REG(0x00206020) /* UART 1 Receiver Register 8 */ +#define MX1_URX9D_1 __REG(0x00206024) /* UART 1 Receiver Register 9 */ +#define MX1_URX10D_1 __REG(0x00206028) /* UART 1 Receiver Register 10 */ +#define MX1_URX11D_1 __REG(0x0020602C) /* UART 1 Receiver Register 11 */ #define MX1_URX12D_1 __REG(0x00206030) /* UART 1 Receiver Register 12 */ #define MX1_URX13D_1 __REG(0x00206034) /* UART 1 Receiver Register 13 */ -#define MX1_URX14D_1 __REG(0x00206038) /* UART 1 Receiver Register 14 */ +#define MX1_URX14D_1 __REG(0x00206038) /* UART 1 Receiver Register 14 */ #define MX1_URX15D_1 __REG(0x0020603c) /* UART 1 Receiver Register 15 */ - -#define MX1_UTX0D_1 __REG(0x00206040) /* UART 1 Transmitter Register 0 */ -#define MX1_UTX1D_1 __REG(0x00206044) /* UART 1 Transmitter Register 1 */ -#define MX1_UTX2D_1 __REG(0x00206048) /* UART 1 Transmitter Register 2 */ -#define MX1_UTX3D_1 __REG(0x0020604C) /* UART 1 Transmitter Register 3 */ -#define MX1_UTX4D_1 __REG(0x00206050) /* UART 1 Transmitter Register 4 */ -#define MX1_UTX5D_1 __REG(0x00206054) /* UART 1 Transmitter Register 5 */ -#define MX1_UTX6D_1 __REG(0x00206058) /* UART 1 Transmitter Register 6 */ -#define MX1_UTX7D_1 __REG(0x0020605C) /* UART 1 Transmitter Register 7 */ -#define MX1_UTX8D_1 __REG(0x00206060) /* UART 1 Transmitter Register 8 */ -#define MX1_UTX9D_1 __REG(0x00206064) /* UART 1 Transmitter Register 9 */ -#define MX1_UTX10D_1 __REG(0x00206068) /* UART 1 Transmitter Register 10 */ -#define MX1_UTX11D_1 __REG(0x0020606C) /* UART 1 Transmitter Register 11 */ +#define MX1_UTX0D_1 __REG(0x00206040) /* UART 1 Transmitter Register 0 */ +#define MX1_UTX1D_1 __REG(0x00206044) /* UART 1 Transmitter Register 1 */ +#define MX1_UTX2D_1 __REG(0x00206048) /* UART 1 Transmitter Register 2 */ +#define MX1_UTX3D_1 __REG(0x0020604C) /* UART 1 Transmitter Register 3 */ +#define MX1_UTX4D_1 __REG(0x00206050) /* UART 1 Transmitter Register 4 */ +#define MX1_UTX5D_1 __REG(0x00206054) /* UART 1 Transmitter Register 5 */ +#define MX1_UTX6D_1 __REG(0x00206058) /* UART 1 Transmitter Register 6 */ +#define MX1_UTX7D_1 __REG(0x0020605C) /* UART 1 Transmitter Register 7 */ +#define MX1_UTX8D_1 __REG(0x00206060) /* UART 1 Transmitter Register 8 */ +#define MX1_UTX9D_1 __REG(0x00206064) /* UART 1 Transmitter Register 9 */ +#define MX1_UTX10D_1 __REG(0x00206068) /* UART 1 Transmitter Register 10 */ +#define MX1_UTX11D_1 __REG(0x0020606C) /* UART 1 Transmitter Register 11 */ #define MX1_UTX12D_1 __REG(0x00206060) /* UART 1 Transmitter Register 12 */ #define MX1_UTX13D_1 __REG(0x00206074) /* UART 1 Transmitter Register 13 */ -#define MX1_UTX14D_1 __REG(0x00206078) /* UART 1 Transmitter Register 14 */ +#define MX1_UTX14D_1 __REG(0x00206078) /* UART 1 Transmitter Register 14 */ #define MX1_UTX15D_1 __REG(0x0020607c) /* UART 1 Transmitter Register 15 */ #define MX1_UCR1_1 __REG(0x00206080) /* UART 1 Control Register 1 */ #define MX1_UCR2_1 __REG(0x00206084) /* UART 1 Control Register 2 */ #define MX1_UCR3_1 __REG(0x00206088) /* UART 1 Control Register 3 */ #define MX1_UCR4_1 __REG(0x0020608C) /* UART 1 Control Register 4 */ -#define MX1_UFCR_1 __REG(0x00206090) /* UART 1 FIFO Control Register */ +#define MX1_UFCR_1 __REG(0x00206090) /* UART 1 FIFO Control Register */ #define MX1_USR1_1 __REG(0x00206094) /* UART 1 Status Register 1 */ #define MX1_USR2_1 __REG(0x00206098) /* UART 1 Status Register 2 */ -#define MX1_UESC_1 __REG(0x0020609C) /* UART 1 Escape Character Register */ -#define MX1_UTIM_1 __REG(0x002060A0) /* UART 1 Escape Timer Register */ -#define MX1_UBIR_1 __REG(0x002060A4) /* UART 1 BRM Incremental Register */ -#define MX1_UBMR_1 __REG(0x002060A8) /* UART 1 BRM Modulator Register */ -#define MX1_UBRC_1 __REG(0x002060AC) /* UART 1 Baud Rate Count Register */ +#define MX1_UESC_1 __REG(0x0020609C) /* UART 1 Escape Character Register */ +#define MX1_UTIM_1 __REG(0x002060A0) /* UART 1 Escape Timer Register */ +#define MX1_UBIR_1 __REG(0x002060A4) /* UART 1 BRM Incremental Register */ +#define MX1_UBMR_1 __REG(0x002060A8) /* UART 1 BRM Modulator Register */ +#define MX1_UBRC_1 __REG(0x002060AC) /* UART 1 Baud Rate Count Register */ #define MX1_BIPR1_1 __REG(0x002060B0) /* UART 1 BRM Incremental Preset Register 1 */ #define MX1_BIPR2_1 __REG(0x002060B4) /* UART 1 BRM Incremental Preset Register 2 */ #define MX1_BIPR3_1 __REG(0x002060B8) /* UART 1 BRM Incremental Preset Register 3 */ @@ -182,57 +164,55 @@ typedef VU32 * P_VU32; #define MX1_BMPR2_1 __REG(0x002060C4) /* UART 1 BRM Modulator Preset Register 2 */ #define MX1_BMPR3_1 __REG(0x002060C8) /* UART 1 BRM Modulator Preset Register 3 */ #define MX1_BMPR4_1 __REG(0x002060CC) /* UART 1 BRM Modulator Preset Register 4 */ -#define MX1_UTS_1 __REG(0x002060D0) /* UART 1 Test Register 1 */ - +#define MX1_UTS_1 __REG(0x002060D0) /* UART 1 Test Register 1 */ /* UART 2 */ -#define MX1_URX0D_2 __REG(0x00207000) /* UART 2 Receiver Register 0 */ -#define MX1_URX1D_2 __REG(0x00207004) /* UART 2 Receiver Register 1 */ -#define MX1_URX2D_2 __REG(0x00207008) /* UART 2 Receiver Register 2 */ -#define MX1_URX3D_2 __REG(0x0020700C) /* UART 2 Receiver Register 3 */ -#define MX1_URX4D_2 __REG(0x00207010) /* UART 2 Receiver Register 4 */ -#define MX1_URX5D_2 __REG(0x00207014) /* UART 2 Receiver Register 5 */ -#define MX1_URX6D_2 __REG(0x00207018) /* UART 2 Receiver Register 6 */ -#define MX1_URX7D_2 __REG(0x0020701C) /* UART 2 Receiver Register 7 */ -#define MX1_URX8D_2 __REG(0x00207020) /* UART 2 Receiver Register 8 */ -#define MX1_URX9D_2 __REG(0x00207024) /* UART 2 Receiver Register 9 */ -#define MX1_URX10D_2 __REG(0x00207028) /* UART 2 Receiver Register 10 */ -#define MX1_URX11D_2 __REG(0x0020702C) /* UART 2 Receiver Register 11 */ +#define MX1_URX0D_2 __REG(0x00207000) /* UART 2 Receiver Register 0 */ +#define MX1_URX1D_2 __REG(0x00207004) /* UART 2 Receiver Register 1 */ +#define MX1_URX2D_2 __REG(0x00207008) /* UART 2 Receiver Register 2 */ +#define MX1_URX3D_2 __REG(0x0020700C) /* UART 2 Receiver Register 3 */ +#define MX1_URX4D_2 __REG(0x00207010) /* UART 2 Receiver Register 4 */ +#define MX1_URX5D_2 __REG(0x00207014) /* UART 2 Receiver Register 5 */ +#define MX1_URX6D_2 __REG(0x00207018) /* UART 2 Receiver Register 6 */ +#define MX1_URX7D_2 __REG(0x0020701C) /* UART 2 Receiver Register 7 */ +#define MX1_URX8D_2 __REG(0x00207020) /* UART 2 Receiver Register 8 */ +#define MX1_URX9D_2 __REG(0x00207024) /* UART 2 Receiver Register 9 */ +#define MX1_URX10D_2 __REG(0x00207028) /* UART 2 Receiver Register 10 */ +#define MX1_URX11D_2 __REG(0x0020702C) /* UART 2 Receiver Register 11 */ #define MX1_URX12D_2 __REG(0x00207030) /* UART 2 Receiver Register 12 */ #define MX1_URX13D_2 __REG(0x00207034) /* UART 2 Receiver Register 13 */ -#define MX1_URX14D_2 __REG(0x00207038) /* UART 2 Receiver Register 14 */ +#define MX1_URX14D_2 __REG(0x00207038) /* UART 2 Receiver Register 14 */ #define MX1_URX15D_2 __REG(0x0020703c) /* UART 2 Receiver Register 15 */ - -#define MX1_UTX0D_2 __REG(0x00207040) /* UART 2 Transmitter Register 0 */ -#define MX1_UTX1D_2 __REG(0x00207044) /* UART 2 Transmitter Register 1 */ -#define MX1_UTX2D_2 __REG(0x00207048) /* UART 2 Transmitter Register 2 */ -#define MX1_UTX3D_2 __REG(0x0020704C) /* UART 2 Transmitter Register 3 */ -#define MX1_UTX4D_2 __REG(0x00207050) /* UART 2 Transmitter Register 4 */ -#define MX1_UTX5D_2 __REG(0x00207054) /* UART 2 Transmitter Register 5 */ -#define MX1_UTX6D_2 __REG(0x00207058) /* UART 2 Transmitter Register 6 */ -#define MX1_UTX7D_2 __REG(0x0020705C) /* UART 2 Transmitter Register 7 */ -#define MX1_UTX8D_2 __REG(0x00207060) /* UART 2 Transmitter Register 8 */ -#define MX1_UTX9D_2 __REG(0x00207064) /* UART 2 Transmitter Register 9 */ -#define MX1_UTX10D_2 __REG(0x00207068) /* UART 2 Transmitter Register 10 */ -#define MX1_UTX11D_2 __REG(0x0020706C) /* UART 2 Transmitter Register 11 */ +#define MX1_UTX0D_2 __REG(0x00207040) /* UART 2 Transmitter Register 0 */ +#define MX1_UTX1D_2 __REG(0x00207044) /* UART 2 Transmitter Register 1 */ +#define MX1_UTX2D_2 __REG(0x00207048) /* UART 2 Transmitter Register 2 */ +#define MX1_UTX3D_2 __REG(0x0020704C) /* UART 2 Transmitter Register 3 */ +#define MX1_UTX4D_2 __REG(0x00207050) /* UART 2 Transmitter Register 4 */ +#define MX1_UTX5D_2 __REG(0x00207054) /* UART 2 Transmitter Register 5 */ +#define MX1_UTX6D_2 __REG(0x00207058) /* UART 2 Transmitter Register 6 */ +#define MX1_UTX7D_2 __REG(0x0020705C) /* UART 2 Transmitter Register 7 */ +#define MX1_UTX8D_2 __REG(0x00207060) /* UART 2 Transmitter Register 8 */ +#define MX1_UTX9D_2 __REG(0x00207064) /* UART 2 Transmitter Register 9 */ +#define MX1_UTX10D_2 __REG(0x00207068) /* UART 2 Transmitter Register 10 */ +#define MX1_UTX11D_2 __REG(0x0020706C) /* UART 2 Transmitter Register 11 */ #define MX1_UTX12D_2 __REG(0x00207060) /* UART 2 Transmitter Register 12 */ #define MX1_UTX13D_2 __REG(0x00207074) /* UART 2 Transmitter Register 13 */ -#define MX1_UTX14D_2 __REG(0x00207078) /* UART 2 Transmitter Register 14 */ +#define MX1_UTX14D_2 __REG(0x00207078) /* UART 2 Transmitter Register 14 */ #define MX1_UTX15D_2 __REG(0x0020707c) /* UART 2 Transmitter Register 15 */ #define MX1_UCR1_2 __REG(0x00207080) /* UART 2 Control Register 1 */ #define MX1_UCR2_2 __REG(0x00207084) /* UART 2 Control Register 2 */ #define MX1_UCR3_2 __REG(0x00207088) /* UART 2 Control Register 3 */ #define MX1_UCR4_2 __REG(0x0020708C) /* UART 2 Control Register 4 */ -#define MX1_UFCR_2 __REG(0x00207090) /* UART 2 FIFO Control Register */ +#define MX1_UFCR_2 __REG(0x00207090) /* UART 2 FIFO Control Register */ #define MX1_USR1_2 __REG(0x00207094) /* UART 2 Status Register 1 */ #define MX1_USR2_2 __REG(0x00207098) /* UART 2 Status Register 2 */ -#define MX1_UESC_2 __REG(0x0020709C) /* UART 2 Escape Character Register */ -#define MX1_UTIM_2 __REG(0x002070A0) /* UART 2 Escape Timer Register */ -#define MX1_UBIR_2 __REG(0x002070A4) /* UART 2 BRM Incremental Register */ -#define MX1_UBMR_2 __REG(0x002070A8) /* UART 2 BRM Modulator Register */ -#define MX1_UBRC_2 __REG(0x002070AC) /* UART 2 Baud Rate Count Register */ +#define MX1_UESC_2 __REG(0x0020709C) /* UART 2 Escape Character Register */ +#define MX1_UTIM_2 __REG(0x002070A0) /* UART 2 Escape Timer Register */ +#define MX1_UBIR_2 __REG(0x002070A4) /* UART 2 BRM Incremental Register */ +#define MX1_UBMR_2 __REG(0x002070A8) /* UART 2 BRM Modulator Register */ +#define MX1_UBRC_2 __REG(0x002070AC) /* UART 2 Baud Rate Count Register */ #define MX1_BIPR1_2 __REG(0x002070B0) /* UART 2 BRM Incremental Preset Register 1 */ #define MX1_BIPR2_2 __REG(0x002070B4) /* UART 2 BRM Incremental Preset Register 2 */ #define MX1_BIPR3_2 __REG(0x002070B8) /* UART 2 BRM Incremental Preset Register 3 */ @@ -241,827 +221,684 @@ typedef VU32 * P_VU32; #define MX1_BMPR2_2 __REG(0x002070C4) /* UART 2 BRM Modulator Preset Register 2 */ #define MX1_BMPR3_2 __REG(0x002070C8) /* UART 2 BRM Modulator Preset Register 3 */ #define MX1_BMPR4_2 __REG(0x002070CC) /* UART 2 BRM Modulator Preset Register 4 */ -#define MX1_UTS_2 __REG(0x002070D0) /* UART 2 Test Register 1 */ - +#define MX1_UTS_2 __REG(0x002070D0) /* UART 2 Test Register 1 */ /* * MX1 PWM registers */ - -#define MX1_PWMC __REG(0x00208000) /* PWM Control Register */ -#define MX1_PWMS __REG(0x00208004) /* PWM Sample Register */ -#define MX1_PWMP __REG(0x00208008) /* PWM Period Register */ -#define MX1_PWMCNT __REG(0x0020800C) /* PWM Counter Register */ - - +#define MX1_PWMC __REG(0x00208000) /* PWM Control Register */ +#define MX1_PWMS __REG(0x00208004) /* PWM Sample Register */ +#define MX1_PWMP __REG(0x00208008) /* PWM Period Register */ +#define MX1_PWMCNT __REG(0x0020800C) /* PWM Counter Register */ /* * MX1 DMAC registers */ - -#define MX1_DCR __REG(0x00209000) /* DMA Control Register */ -#define MX1_DISR __REG(0x00209004) /* DMA Interrupt Status Register */ -#define MX1_DIMR __REG(0x00209008) /* DMA Interrupt Mask Register */ -#define MX1_DBTOSR __REG(0x0020900C) /* DMA Burst Time-Out Status Register */ -#define MX1_DRTOSR __REG(0x00209010) /* DMA Request Time-Out Status Register */ -#define MX1_DSESR __REG(0x00209014) /* DMA Request Time-Out Status Register */ -#define MX1_DBOSR __REG(0x00209018) /* DMA Buffer Overflow Status Register */ -#define MX1_DBTOCR __REG(0x0020901C) /* DMA Burst Time-Out Control Register */ - -#define MX1_WSRA __REG(0x00209040) /* DMA W-Size Register A */ -#define MX1_XSRA __REG(0x00209044) /* DMA X-Size Register A */ -#define MX1_YSRA __REG(0x00209048) /* DMA Y-Size Register A */ - -#define MX1_WSRB __REG(0x0020904C) /* DMA W-Size Register B */ -#define MX1_XSRB __REG(0x00209050) /* DMA X-Size Register B */ -#define MX1_YSRB __REG(0x00209054) /* DMA Y-Size Register B */ +#define MX1_DCR __REG(0x00209000) /* DMA Control Register */ +#define MX1_DISR __REG(0x00209004) /* DMA Interrupt Status Register */ +#define MX1_DIMR __REG(0x00209008) /* DMA Interrupt Mask Register */ +#define MX1_DBTOSR __REG(0x0020900C) /* DMA Burst Time-Out Status Register */ +#define MX1_DRTOSR __REG(0x00209010) /* DMA Request Time-Out Status Register */ +#define MX1_DSESR __REG(0x00209014) /* DMA Request Time-Out Status Register */ +#define MX1_DBOSR __REG(0x00209018) /* DMA Buffer Overflow Status Register */ +#define MX1_DBTOCR __REG(0x0020901C) /* DMA Burst Time-Out Control Register */ + +#define MX1_WSRA __REG(0x00209040) /* DMA W-Size Register A */ +#define MX1_XSRA __REG(0x00209044) /* DMA X-Size Register A */ +#define MX1_YSRA __REG(0x00209048) /* DMA Y-Size Register A */ + +#define MX1_WSRB __REG(0x0020904C) /* DMA W-Size Register B */ +#define MX1_XSRB __REG(0x00209050) /* DMA X-Size Register B */ +#define MX1_YSRB __REG(0x00209054) /* DMA Y-Size Register B */ /* Channel 0 */ #define MX1_SAR0 __REG(0x00209080) /* Channel 0 Source Address Register */ -#define MX1_DAR0 __REG(0x00209084) /* Channel 0 Destination Address Register */ -#define MX1_CNTR0 __REG(0x00209088) /* Channel 0 Count Register */ -#define MX1_CCR0 __REG(0x0020908C) /* Channel 0 Control Register */ -#define MX1_RSSR0 __REG(0x00209090) /* Channel 0 Request Source Select Register */ -#define MX1_BLR0 __REG(0x00209094) /* Channel 0 Burst Length Register */ -#define MX1_RTOR0 __REG(0x00209098) /* Channel 0 Request Time-Out Register */ -#define MX1_BUCR0 __REG(0x00209098) /* Channel 0 Bus Utilization Control Register */ - +#define MX1_DAR0 __REG(0x00209084) /* Channel 0 Destination Address Register */ +#define MX1_CNTR0 __REG(0x00209088) /* Channel 0 Count Register */ +#define MX1_CCR0 __REG(0x0020908C) /* Channel 0 Control Register */ +#define MX1_RSSR0 __REG(0x00209090) /* Channel 0 Request Source Select Register */ +#define MX1_BLR0 __REG(0x00209094) /* Channel 0 Burst Length Register */ +#define MX1_RTOR0 __REG(0x00209098) /* Channel 0 Request Time-Out Register */ +#define MX1_BUCR0 __REG(0x00209098) /* Channel 0 Bus Utilization Control Register */ /* Channel 1 */ #define MX1_SAR1 __REG(0x002090C0) /* Channel 1 Source Address Register */ -#define MX1_DAR1 __REG(0x002090C4) /* Channel 1 Destination Address Register */ -#define MX1_CNTR1 __REG(0x002090C8) /* Channel 1 Count Register */ -#define MX1_CCR1 __REG(0x002090CC) /* Channel 1 Control Register */ -#define MX1_RSSR1 __REG(0x002090D0) /* Channel 1 Request Source Select Register */ -#define MX1_BLR1 __REG(0x002090D4) /* Channel 1 Burst Length Register */ -#define MX1_RTOR1 __REG(0x002090D8) /* Channel 1 Request Time-Out Register */ -#define MX1_BUCR1 __REG(0x002090D8) /* Channel 1 Bus Utilization Control Register */ - +#define MX1_DAR1 __REG(0x002090C4) /* Channel 1 Destination Address Register */ +#define MX1_CNTR1 __REG(0x002090C8) /* Channel 1 Count Register */ +#define MX1_CCR1 __REG(0x002090CC) /* Channel 1 Control Register */ +#define MX1_RSSR1 __REG(0x002090D0) /* Channel 1 Request Source Select Register */ +#define MX1_BLR1 __REG(0x002090D4) /* Channel 1 Burst Length Register */ +#define MX1_RTOR1 __REG(0x002090D8) /* Channel 1 Request Time-Out Register */ +#define MX1_BUCR1 __REG(0x002090D8) /* Channel 1 Bus Utilization Control Register */ /* Channel 2 */ #define MX1_SAR2 __REG(0x00209100) /* Channel 2 Source Address Register */ -#define MX1_DAR2 __REG(0x00209104) /* Channel 2 Destination Address Register */ -#define MX1_CNTR2 __REG(0x00209108) /* Channel 2 Count Register */ -#define MX1_CCR2 __REG(0x0020910C) /* Channel 2 Control Register */ -#define MX1_RSSR2 __REG(0x00209110) /* Channel 2 Request Source Select Register */ -#define MX1_BLR2 __REG(0x00209114) /* Channel 2 Burst Length Register */ -#define MX1_RTOR2 __REG(0x00209118) /* Channel 2 Request Time-Out Register */ -#define MX1_BUCR2 __REG(0x00209118) /* Channel 2 Bus Utilization Control Register */ - - +#define MX1_DAR2 __REG(0x00209104) /* Channel 2 Destination Address Register */ +#define MX1_CNTR2 __REG(0x00209108) /* Channel 2 Count Register */ +#define MX1_CCR2 __REG(0x0020910C) /* Channel 2 Control Register */ +#define MX1_RSSR2 __REG(0x00209110) /* Channel 2 Request Source Select Register */ +#define MX1_BLR2 __REG(0x00209114) /* Channel 2 Burst Length Register */ +#define MX1_RTOR2 __REG(0x00209118) /* Channel 2 Request Time-Out Register */ +#define MX1_BUCR2 __REG(0x00209118) /* Channel 2 Bus Utilization Control Register */ /* Channel 3 */ #define MX1_SAR3 __REG(0x00209140) /* Channel 3 Source Address Register */ -#define MX1_DAR3 __REG(0x00209144) /* Channel 3 Destination Address Register */ -#define MX1_CNTR3 __REG(0x00209148) /* Channel 3 Count Register */ -#define MX1_CCR3 __REG(0x0020914C) /* Channel 3 Control Register */ -#define MX1_RSSR3 __REG(0x00209150) /* Channel 3 Request Source Select Register */ -#define MX1_BLR3 __REG(0x00209154) /* Channel 3 Burst Length Register */ -#define MX1_RTOR3 __REG(0x00209158) /* Channel 3 Request Time-Out Register */ -#define MX1_BUCR3 __REG(0x00209158) /* Channel 3 Bus Utilization Control Register */ - +#define MX1_DAR3 __REG(0x00209144) /* Channel 3 Destination Address Register */ +#define MX1_CNTR3 __REG(0x00209148) /* Channel 3 Count Register */ +#define MX1_CCR3 __REG(0x0020914C) /* Channel 3 Control Register */ +#define MX1_RSSR3 __REG(0x00209150) /* Channel 3 Request Source Select Register */ +#define MX1_BLR3 __REG(0x00209154) /* Channel 3 Burst Length Register */ +#define MX1_RTOR3 __REG(0x00209158) /* Channel 3 Request Time-Out Register */ +#define MX1_BUCR3 __REG(0x00209158) /* Channel 3 Bus Utilization Control Register */ /* Channel 4 */ #define MX1_SAR4 __REG(0x00209180) /* Channel 4 Source Address Register */ -#define MX1_DAR4 __REG(0x00209184) /* Channel 4 Destination Address Register */ -#define MX1_CNTR4 __REG(0x00209188) /* Channel 4 Count Register */ -#define MX1_CCR4 __REG(0x0020918C) /* Channel 4 Control Register */ -#define MX1_RSSR4 __REG(0x00209190) /* Channel 4 Request Source Select Register */ -#define MX1_BLR4 __REG(0x00209194) /* Channel 4 Burst Length Register */ -#define MX1_RTOR4 __REG(0x00209198) /* Channel 4 Request Time-Out Register */ -#define MX1_BUCR4 __REG(0x00209198) /* Channel 4 Bus Utilization Control Register */ - +#define MX1_DAR4 __REG(0x00209184) /* Channel 4 Destination Address Register */ +#define MX1_CNTR4 __REG(0x00209188) /* Channel 4 Count Register */ +#define MX1_CCR4 __REG(0x0020918C) /* Channel 4 Control Register */ +#define MX1_RSSR4 __REG(0x00209190) /* Channel 4 Request Source Select Register */ +#define MX1_BLR4 __REG(0x00209194) /* Channel 4 Burst Length Register */ +#define MX1_RTOR4 __REG(0x00209198) /* Channel 4 Request Time-Out Register */ +#define MX1_BUCR4 __REG(0x00209198) /* Channel 4 Bus Utilization Control Register */ /* Channel 5 */ #define MX1_SAR5 __REG(0x002091C0) /* Channel 5 Source Address Register */ -#define MX1_DAR5 __REG(0x002091C4) /* Channel 5 Destination Address Register */ -#define MX1_CNTR5 __REG(0x002091C8) /* Channel 5 Count Register */ -#define MX1_CCR5 __REG(0x002091CC) /* Channel 5 Control Register */ -#define MX1_RSSR5 __REG(0x002091D0) /* Channel 5 Request Source Select Register */ -#define MX1_BLR5 __REG(0x002091D4) /* Channel 5 Burst Length Register */ -#define MX1_RTOR5 __REG(0x002091D8) /* Channel 5 Request Time-Out Register */ -#define MX1_BUCR5 __REG(0x002091D8) /* Channel 5 Bus Utilization Control Register */ - +#define MX1_DAR5 __REG(0x002091C4) /* Channel 5 Destination Address Register */ +#define MX1_CNTR5 __REG(0x002091C8) /* Channel 5 Count Register */ +#define MX1_CCR5 __REG(0x002091CC) /* Channel 5 Control Register */ +#define MX1_RSSR5 __REG(0x002091D0) /* Channel 5 Request Source Select Register */ +#define MX1_BLR5 __REG(0x002091D4) /* Channel 5 Burst Length Register */ +#define MX1_RTOR5 __REG(0x002091D8) /* Channel 5 Request Time-Out Register */ +#define MX1_BUCR5 __REG(0x002091D8) /* Channel 5 Bus Utilization Control Register */ /* Channel 6 */ #define MX1_SAR6 __REG(0x00209200) /* Channel 6 Source Address Register */ -#define MX1_DAR6 __REG(0x00209204) /* Channel 6 Destination Address Register */ -#define MX1_CNTR6 __REG(0x00209208) /* Channel 6 Count Register */ -#define MX1_CCR6 __REG(0x0020920C) /* Channel 6 Control Register */ -#define MX1_RSSR6 __REG(0x00209210) /* Channel 6 Request Source Select Register */ -#define MX1_BLR6 __REG(0x00209214) /* Channel 6 Burst Length Register */ -#define MX1_RTOR6 __REG(0x00209218) /* Channel 6 Request Time-Out Register */ -#define MX1_BUCR6 __REG(0x00209218) /* Channel 6 Bus Utilization Control Register */ - +#define MX1_DAR6 __REG(0x00209204) /* Channel 6 Destination Address Register */ +#define MX1_CNTR6 __REG(0x00209208) /* Channel 6 Count Register */ +#define MX1_CCR6 __REG(0x0020920C) /* Channel 6 Control Register */ +#define MX1_RSSR6 __REG(0x00209210) /* Channel 6 Request Source Select Register */ +#define MX1_BLR6 __REG(0x00209214) /* Channel 6 Burst Length Register */ +#define MX1_RTOR6 __REG(0x00209218) /* Channel 6 Request Time-Out Register */ +#define MX1_BUCR6 __REG(0x00209218) /* Channel 6 Bus Utilization Control Register */ /* Channel 7 */ #define MX1_SAR7 __REG(0x00209240) /* Channel 7 Source Address Register */ -#define MX1_DAR7 __REG(0x00209244) /* Channel 7 Destination Address Register */ -#define MX1_CNTR7 __REG(0x00209248) /* Channel 7 Count Register */ -#define MX1_CCR7 __REG(0x0020924C) /* Channel 7 Control Register */ -#define MX1_RSSR7 __REG(0x00209250) /* Channel 7 Request Source Select Register */ -#define MX1_BLR7 __REG(0x00209254) /* Channel 7 Burst Length Register */ -#define MX1_RTOR7 __REG(0x00209258) /* Channel 7 Request Time-Out Register */ -#define MX1_BUCR7 __REG(0x00209258) /* Channel 7 Bus Utilization Control Register */ - +#define MX1_DAR7 __REG(0x00209244) /* Channel 7 Destination Address Register */ +#define MX1_CNTR7 __REG(0x00209248) /* Channel 7 Count Register */ +#define MX1_CCR7 __REG(0x0020924C) /* Channel 7 Control Register */ +#define MX1_RSSR7 __REG(0x00209250) /* Channel 7 Request Source Select Register */ +#define MX1_BLR7 __REG(0x00209254) /* Channel 7 Burst Length Register */ +#define MX1_RTOR7 __REG(0x00209258) /* Channel 7 Request Time-Out Register */ +#define MX1_BUCR7 __REG(0x00209258) /* Channel 7 Bus Utilization Control Register */ /* Channel 8 */ #define MX1_SAR8 __REG(0x00209280) /* Channel 8 Source Address Register */ -#define MX1_DAR8 __REG(0x00209284) /* Channel 8 Destination Address Register */ -#define MX1_CNTR8 __REG(0x00209288) /* Channel 8 Count Register */ -#define MX1_CCR8 __REG(0x0020928C) /* Channel 8 Control Register */ -#define MX1_RSSR8 __REG(0x00209290) /* Channel 8 Request Source Select Register */ -#define MX1_BLR8 __REG(0x00209294) /* Channel 8 Burst Length Register */ -#define MX1_RTOR8 __REG(0x00209298) /* Channel 8 Request Time-Out Register */ -#define MX1_BUCR8 __REG(0x00209298) /* Channel 8 Bus Utilization Control Register */ - +#define MX1_DAR8 __REG(0x00209284) /* Channel 8 Destination Address Register */ +#define MX1_CNTR8 __REG(0x00209288) /* Channel 8 Count Register */ +#define MX1_CCR8 __REG(0x0020928C) /* Channel 8 Control Register */ +#define MX1_RSSR8 __REG(0x00209290) /* Channel 8 Request Source Select Register */ +#define MX1_BLR8 __REG(0x00209294) /* Channel 8 Burst Length Register */ +#define MX1_RTOR8 __REG(0x00209298) /* Channel 8 Request Time-Out Register */ +#define MX1_BUCR8 __REG(0x00209298) /* Channel 8 Bus Utilization Control Register */ /* Channel 9 */ #define MX1_SAR9 __REG(0x002092C0) /* Channel 9 Source Address Register */ -#define MX1_DAR9 __REG(0x002092C4) /* Channel 9 Destination Address Register */ -#define MX1_CNTR9 __REG(0x002092C8) /* Channel 9 Count Register */ -#define MX1_CCR9 __REG(0x002092CC) /* Channel 9 Control Register */ -#define MX1_RSSR9 __REG(0x002092D0) /* Channel 9 Request Source Select Register */ -#define MX1_BLR9 __REG(0x002092D4) /* Channel 9 Burst Length Register */ -#define MX1_RTOR9 __REG(0x002092D8) /* Channel 9 Request Time-Out Register */ -#define MX1_BUCR9 __REG(0x002092D8) /* Channel 9 Bus Utilization Control Register */ - +#define MX1_DAR9 __REG(0x002092C4) /* Channel 9 Destination Address Register */ +#define MX1_CNTR9 __REG(0x002092C8) /* Channel 9 Count Register */ +#define MX1_CCR9 __REG(0x002092CC) /* Channel 9 Control Register */ +#define MX1_RSSR9 __REG(0x002092D0) /* Channel 9 Request Source Select Register */ +#define MX1_BLR9 __REG(0x002092D4) /* Channel 9 Burst Length Register */ +#define MX1_RTOR9 __REG(0x002092D8) /* Channel 9 Request Time-Out Register */ +#define MX1_BUCR9 __REG(0x002092D8) /* Channel 9 Bus Utilization Control Register */ /* Channel 10 */ #define MX1_SAR10 __REG(0x00209300) /* Channel 10 Source Address Register */ -#define MX1_DAR10 __REG(0x00209304) /* Channel 10 Destination Address Register */ -#define MX1_CNTR10 __REG(0x00209308) /* Channel 10 Count Register */ -#define MX1_CCR10 __REG(0x0020930C) /* Channel 10 Control Register */ -#define MX1_RSSR10 __REG(0x00209310) /* Channel 10 Request Source Select Register */ -#define MX1_BLR10 __REG(0x00209314) /* Channel 10 Burst Length Register */ -#define MX1_RTOR10 __REG(0x00209318) /* Channel 10 Request Time-Out Register */ -#define MX1_BUCR10 __REG(0x00209318) /* Channel 10 Bus Utilization Control Register */ - - -#define MX1_TCR __REG(0x00209340) /* Test Control Register */ -#define MX1_TFIFOAR __REG(0x00209344) /* Test FIFO A Register */ -#define MX1_TDRR __REG(0x00209348) /* Test DMA Request Register */ -#define MX1_TDIPR __REG(0x0020934C) /* Test DMA In Progress Register */ -#define MX1_TFIFOBR __REG(0x00209350) /* Test FIFO B Register */ - - +#define MX1_DAR10 __REG(0x00209304) /* Channel 10 Destination Address Register */ +#define MX1_CNTR10 __REG(0x00209308) /* Channel 10 Count Register */ +#define MX1_CCR10 __REG(0x0020930C) /* Channel 10 Control Register */ +#define MX1_RSSR10 __REG(0x00209310) /* Channel 10 Request Source Select Register */ +#define MX1_BLR10 __REG(0x00209314) /* Channel 10 Burst Length Register */ +#define MX1_RTOR10 __REG(0x00209318) /* Channel 10 Request Time-Out Register */ +#define MX1_BUCR10 __REG(0x00209318) /* Channel 10 Bus Utilization Control Register */ + +#define MX1_TCR __REG(0x00209340) /* Test Control Register */ +#define MX1_TFIFOAR __REG(0x00209344) /* Test FIFO A Register */ +#define MX1_TDRR __REG(0x00209348) /* Test DMA Request Register */ +#define MX1_TDIPR __REG(0x0020934C) /* Test DMA In Progress Register */ +#define MX1_TFIFOBR __REG(0x00209350) /* Test FIFO B Register */ /* * MX1 SIM registers */ -#define MX1_PORT_CNTL __REG(0x00211000) /* Port Control Register */ -#define MX1_CNTL __REG(0x00211004) /* Control Register */ -#define MX1_RCV_THRESHOLD __REG(0x00211008)/* Receive Threshold Register */ -#define MX1_ENABLE __REG(0x0021100C) /* Transmit/Receive Enable Register */ -#define MX1_XMT_STATUS __REG(0x00211010) /* Transmit Status Register */ -#define MX1_RCV_STATUS __REG(0x00211014) /* Receive Status Register */ -#define MX1_SIM_INT_MASK __REG(0x00211018) /* Interrupt Mask Register */ -#define MX1_XMT_BUF __REG(0x0021101C) /* Port Transmit Buffer Register */ -#define MX1_RCV_BUF __REG(0x00211020) /* Receive Buffer Register */ +#define MX1_PORT_CNTL __REG(0x00211000) /* Port Control Register */ +#define MX1_CNTL __REG(0x00211004) /* Control Register */ +#define MX1_RCV_THRESHOLD __REG(0x00211008)/* Receive Threshold Register */ +#define MX1_ENABLE __REG(0x0021100C) /* Transmit/Receive Enable Register */ +#define MX1_XMT_STATUS __REG(0x00211010) /* Transmit Status Register */ +#define MX1_RCV_STATUS __REG(0x00211014) /* Receive Status Register */ +#define MX1_SIM_INT_MASK __REG(0x00211018) /* Interrupt Mask Register */ +#define MX1_XMT_BUF __REG(0x0021101C) /* Port Transmit Buffer Register */ +#define MX1_RCV_BUF __REG(0x00211020) /* Receive Buffer Register */ #define MX1_PORT_DETECT __REG(0x00211024) /* Detect Register */ #define MX1_XMT_THRESHOLD __REG(0x00211028)/* Transmit Threshold Register */ -#define MX1_GUARD_CNTL __REG(0x0021102C) /* Transmit Guard Control Register */ -#define MX1_OD_CONFIG __REG(0x00211030) /* Open-Drain Configuration Control Register */ +#define MX1_GUARD_CNTL __REG(0x0021102C) /* Transmit Guard Control Register */ +#define MX1_OD_CONFIG __REG(0x00211030) /* Open-Drain Configuration Control Register */ #define MX1_RESET_CNTL __REG(0x00211034) /* Reset Control Register */ #define MX1_CHAR_WAIT __REG(0x00211038) /* Charactor Wait Timer Register */ -#define MX1_GPCNT __REG(0x0021103C) /* General Purpose Counter Register */ +#define MX1_GPCNT __REG(0x0021103C) /* General Purpose Counter Register */ #define MX1_DIVISOR __REG(0x00211040) /* Divisor Register */ - /* * MX1 USBD registers */ -#define MX1_USB_FRAME __REG(0x00212000) /* USB Frame Number and Match Register */ -#define MX1_USB_SPEC __REG(0x00212004) /* USB Spec & Release Number Register */ -#define MX1_USB_STAT __REG(0x00212008) /* USB Status Register */ -#define MX1_USB_CTRL __REG(0x0021200C) /* USB Control Register */ -#define MX1_USB_DADR __REG(0x00212010) /* USB Descriptor RAM Address Register */ +#define MX1_USB_FRAME __REG(0x00212000) /* USB Frame Number and Match Register */ +#define MX1_USB_SPEC __REG(0x00212004) /* USB Spec & Release Number Register */ +#define MX1_USB_STAT __REG(0x00212008) /* USB Status Register */ +#define MX1_USB_CTRL __REG(0x0021200C) /* USB Control Register */ +#define MX1_USB_DADR __REG(0x00212010) /* USB Descriptor RAM Address Register */ #define MX1_USB_DDAT __REG(0x00212014) /* USB Descriptor RAM/Endpoint buffer Data Register */ -#define MX1_USB_INTR __REG(0x00212018) /* USB Interrupt Status Register */ -#define MX1_USB_MASK __REG(0x0021201C) /* USB Interrupt Mask Register */ -#define MX1_USB_ENAB __REG(0x00212024) /* USB Enable Register */ - +#define MX1_USB_INTR __REG(0x00212018) /* USB Interrupt Status Register */ +#define MX1_USB_MASK __REG(0x0021201C) /* USB Interrupt Mask Register */ +#define MX1_USB_ENAB __REG(0x00212024) /* USB Enable Register */ /* Endpoint 0 */ #define MX1_USB_EP0_STAT __REG(0x00212030) /* Endpoint 0 Status/Control Register */ #define MX1_USB_EP0_INTR __REG(0x00212034) /* Endpoint 0 Interrupt Status Register */ -#define MX1_USB_EP0_MASK __REG(0x00212038) /* Endpoint 0 Interrupt Mask Register */ +#define MX1_USB_EP0_MASK __REG(0x00212038) /* Endpoint 0 Interrupt Mask Register */ #define MX1_USB_EP0_FDAT __REG(0x0021203C) /* Endpoint 0 FIFO Data Register */ #define MX1_USB_EP0_FSTAT __REG(0x00212040) /* Endpoint 0 FIFO Status Register */ -#define MX1_USB_EP0_FCTRL __REG(0x00212044) /* Endpoint 0 FIFO Control Register */ +#define MX1_USB_EP0_FCTRL __REG(0x00212044) /* Endpoint 0 FIFO Control Register */ #define MX1_USB_EP0_LRFP __REG(0x00212048) /* Endpoint 0 Last Read Frame Pointer Register */ #define MX1_USB_EP0_LWFP __REG(0x0021204C) /* Endpoint 0 Last Write Frame Pointer Register */ #define MX1_USB_EP0_FALRM __REG(0x00212050) /* Endpoint 0 FIFO Alarm Register */ #define MX1_USB_EP0_FRDP __REG(0x00212054) /* Endpoint 0 FIFO Read Pointer Register */ #define MX1_USB_EP0_FWRP __REG(0x00212058) /* Endpoint 0 FIFO Write Pointer Register */ - /* Endpoint 1 */ #define MX1_USB_EP1_STAT __REG(0x00212060) /* Endpoint 1 Status/Control Register */ #define MX1_USB_EP1_INTR __REG(0x00212064) /* Endpoint 1 Interrupt Status Register */ -#define MX1_USB_EP1_MASK __REG(0x00212068) /* Endpoint 1 Interrupt Mask Register */ +#define MX1_USB_EP1_MASK __REG(0x00212068) /* Endpoint 1 Interrupt Mask Register */ #define MX1_USB_EP1_FDAT __REG(0x0021206C) /* Endpoint 1 FIFO Data Register */ #define MX1_USB_EP1_FSTAT __REG(0x00212070) /* Endpoint 1 FIFO Status Register */ -#define MX1_USB_EP1_FCTRL __REG(0x00212074) /* Endpoint 1 FIFO Control Register */ +#define MX1_USB_EP1_FCTRL __REG(0x00212074) /* Endpoint 1 FIFO Control Register */ #define MX1_USB_EP1_LRFP __REG(0x00212078) /* Endpoint 1 Last Read Frame Pointer Register */ #define MX1_USB_EP1_LWFP __REG(0x0021207C) /* Endpoint 1 Last Write Frame Pointer Register */ #define MX1_USB_EP1_FALRM __REG(0x00212080) /* Endpoint 1 FIFO Alarm Register */ #define MX1_USB_EP1_FRDP __REG(0x00212084) /* Endpoint 1 FIFO Read Pointer Register */ #define MX1_USB_EP1_FWRP __REG(0x00212088) /* Endpoint 1 FIFO Write Pointer Register */ - /* Endpoint 2 */ #define MX1_USB_EP2_STAT __REG(0x00212090) /* Endpoint 2 Status/Control Register */ #define MX1_USB_EP2_INTR __REG(0x00212094) /* Endpoint 2 Interrupt Status Register */ -#define MX1_USB_EP2_MASK __REG(0x00212098) /* Endpoint 2 Interrupt Mask Register */ +#define MX1_USB_EP2_MASK __REG(0x00212098) /* Endpoint 2 Interrupt Mask Register */ #define MX1_USB_EP2_FDAT __REG(0x0021209C) /* Endpoint 2 FIFO Data Register */ #define MX1_USB_EP2_FSTAT __REG(0x002120A0) /* Endpoint 2 FIFO Status Register */ -#define MX1_USB_EP2_FCTRL __REG(0x002120A4) /* Endpoint 2 FIFO Control Register */ +#define MX1_USB_EP2_FCTRL __REG(0x002120A4) /* Endpoint 2 FIFO Control Register */ #define MX1_USB_EP2_LRFP __REG(0x002120A8) /* Endpoint 2 Last Read Frame Pointer Register */ #define MX1_USB_EP2_LWFP __REG(0x002120AC) /* Endpoint 2 Last Write Frame Pointer Register */ #define MX1_USB_EP2_FALRM __REG(0x002120B0) /* Endpoint 2 FIFO Alarm Register */ #define MX1_USB_EP2_FRDP __REG(0x002120B4) /* Endpoint 2 FIFO Read Pointer Register */ #define MX1_USB_EP2_FWRP __REG(0x002120B8) /* Endpoint 2 FIFO Write Pointer Register */ - /* Endpoint 3 */ #define MX1_USB_EP3_STAT __REG(0x002120C0) /* Endpoint 3 Status/Control Register */ #define MX1_USB_EP3_INTR __REG(0x002120C4) /* Endpoint 3 Interrupt Status Register */ -#define MX1_USB_EP3_MASK __REG(0x002120C8) /* Endpoint 3 Interrupt Mask Register */ +#define MX1_USB_EP3_MASK __REG(0x002120C8) /* Endpoint 3 Interrupt Mask Register */ #define MX1_USB_EP3_FDAT __REG(0x002120CC) /* Endpoint 3 FIFO Data Register */ #define MX1_USB_EP3_FSTAT __REG(0x002120D0) /* Endpoint 3 FIFO Status Register */ -#define MX1_USB_EP3_FCTRL __REG(0x002120D4) /* Endpoint 3 FIFO Control Register */ +#define MX1_USB_EP3_FCTRL __REG(0x002120D4) /* Endpoint 3 FIFO Control Register */ #define MX1_USB_EP3_LRFP __REG(0x002120D8) /* Endpoint 3 Last Read Frame Pointer Register */ #define MX1_USB_EP3_LWFP __REG(0x002120DC) /* Endpoint 3 Last Write Frame Pointer Register */ #define MX1_USB_EP3_FALRM __REG(0x002120E0) /* Endpoint 3 FIFO Alarm Register */ #define MX1_USB_EP3_FRDP __REG(0x002120E4) /* Endpoint 3 FIFO Read Pointer Register */ #define MX1_USB_EP3_FWRP __REG(0x002120E8) /* Endpoint 3 FIFO Write Pointer Register */ - - /* Endpoint 4 */ #define MX1_USB_EP4_STAT __REG(0x002120F0) /* Endpoint 4 Status/Control Register */ #define MX1_USB_EP4_INTR __REG(0x002120F4) /* Endpoint 4 Interrupt Status Register */ -#define MX1_USB_EP4_MASK __REG(0x002120F8) /* Endpoint 4 Interrupt Mask Register */ +#define MX1_USB_EP4_MASK __REG(0x002120F8) /* Endpoint 4 Interrupt Mask Register */ #define MX1_USB_EP4_FDAT __REG(0x002120FC) /* Endpoint 4 FIFO Data Register */ #define MX1_USB_EP4_FSTAT __REG(0x00212100) /* Endpoint 4 FIFO Status Register */ -#define MX1_USB_EP4_FCTRL __REG(0x00212104) /* Endpoint 4 FIFO Control Register */ +#define MX1_USB_EP4_FCTRL __REG(0x00212104) /* Endpoint 4 FIFO Control Register */ #define MX1_USB_EP4_LRFP __REG(0x00212108) /* Endpoint 4 Last Read Frame Pointer Register */ #define MX1_USB_EP4_LWFP __REG(0x0021210C) /* Endpoint 4 Last Write Frame Pointer Register */ #define MX1_USB_EP4_FALRM __REG(0x00212110) /* Endpoint 4 FIFO Alarm Register */ #define MX1_USB_EP4_FRDP __REG(0x00212114) /* Endpoint 4 FIFO Read Pointer Register */ #define MX1_USB_EP4_FWRP __REG(0x00212118) /* Endpoint 4 FIFO Write Pointer Register */ - - /* Endpoint 5 */ #define MX1_USB_EP5_STAT __REG(0x00212120) /* Endpoint 5 Status/Control Register */ #define MX1_USB_EP5_INTR __REG(0x00212124) /* Endpoint 5 Interrupt Status Register */ -#define MX1_USB_EP5_MASK __REG(0x00212128) /* Endpoint 5 Interrupt Mask Register */ +#define MX1_USB_EP5_MASK __REG(0x00212128) /* Endpoint 5 Interrupt Mask Register */ #define MX1_USB_EP5_FDAT __REG(0x0021212C) /* Endpoint 5 FIFO Data Register */ #define MX1_USB_EP5_FSTAT __REG(0x00212130) /* Endpoint 5 FIFO Status Register */ -#define MX1_USB_EP5_FCTRL __REG(0x00212134) /* Endpoint 5 FIFO Control Register */ +#define MX1_USB_EP5_FCTRL __REG(0x00212134) /* Endpoint 5 FIFO Control Register */ #define MX1_USB_EP5_LRFP __REG(0x00212138) /* Endpoint 5 Last Read Frame Pointer Register */ #define MX1_USB_EP5_LWFP __REG(0x0021213C) /* Endpoint 5 Last Write Frame Pointer Register */ #define MX1_USB_EP5_FALRM __REG(0x00212140) /* Endpoint 5 FIFO Alarm Register */ #define MX1_USB_EP5_FRDP __REG(0x00212144) /* Endpoint 5 FIFO Read Pointer Register */ #define MX1_USB_EP5_FWRP __REG(0x00212148) /* Endpoint 5 FIFO Write Pointer Register */ - - - /* * MX1 SPI 1 registers */ - -#define MX1_RXDATAREG1 __REG(0x00213000) /* SPI 1 Rx Data Register */ -#define MX1_TXDATAREG1 __REG(0x00213004) /* SPI 1 Tx Data Register */ -#define MX1_CONTROLREG1 __REG(0x00213008) /* SPI 1 Control Register */ -#define MX1_INTREG1 __REG(0x0021300C) /* SPI 1 Interrupt Control/Status Register */ -#define MX1_TESTREG1 __REG(0x00213010) /* SPI 1 Test Register */ -#define MX1_PERIODREG1 __REG(0x00213014) /* SPI 1 Sample Period Control Register */ -#define MX1_DMAREG1 __REG(0x00213018) /* SPI 1 DMA Control Register */ -#define MX1_RESETREG1 __REG(0x00213018) /* SPI 1 Soft Reset Register */ - - - +#define MX1_RXDATAREG1 __REG(0x00213000) /* SPI 1 Rx Data Register */ +#define MX1_TXDATAREG1 __REG(0x00213004) /* SPI 1 Tx Data Register */ +#define MX1_CONTROLREG1 __REG(0x00213008) /* SPI 1 Control Register */ +#define MX1_INTREG1 __REG(0x0021300C) /* SPI 1 Interrupt Control/Status Register */ +#define MX1_TESTREG1 __REG(0x00213010) /* SPI 1 Test Register */ +#define MX1_PERIODREG1 __REG(0x00213014) /* SPI 1 Sample Period Control Register */ +#define MX1_DMAREG1 __REG(0x00213018) /* SPI 1 DMA Control Register */ +#define MX1_RESETREG1 __REG(0x00213018) /* SPI 1 Soft Reset Register */ /* * MX1 MMC/SDHC registers */ - -#define MX1_STR_STP_CLK __REG(0x00214000) /* MMC/SD Clock Control Register */ -#define MX1_STATUS __REG(0x00214004) /* MMC/SD Status Register */ -#define MX1_CLK_RATE __REG(0x00214008) /* MMC/SD Clock Rate Register */ +#define MX1_STR_STP_CLK __REG(0x00214000) /* MMC/SD Clock Control Register */ +#define MX1_STATUS __REG(0x00214004) /* MMC/SD Status Register */ +#define MX1_CLK_RATE __REG(0x00214008) /* MMC/SD Clock Rate Register */ #define MX1_CMD_DAT_CONT __REG(0x0021400C) /* MMC/SD Command & Data Control Register */ -#define MX1_RES_TO __REG(0x00214010) /* MMC/SD Response Time Out Register */ +#define MX1_RES_TO __REG(0x00214010) /* MMC/SD Response Time Out Register */ #define MX1_READ_TO __REG(0x00214014) /* MMC/SD Read Time Out Register */ #define MX1_BLK_LEN __REG(0x00214018) /* MMC/SD Block Length Register */ #define MX1_NOB __REG(0x0021401C) /* MMC/SD Number of Block Register */ #define MX1_REV_NO __REG(0x00214020) /* MMC/SD Revision Number Register */ #define MX1_MMC_INT_MASK __REG(0x00214024) /* MMC/SD Interrupt Mask Register */ -#define MX1_CMD __REG(0x00214028) /* MMC/SD Command Number Register */ -#define MX1_ARGH __REG(0x0021402C) /* MMC/SD Higher Argument Register */ -#define MX1_ARGL __REG(0x00214030) /* MMC/SD Lower Argument Register */ -#define MX1_RES_FIFO __REG(0x00214034) /* MMC/SD Response FIFO Register */ +#define MX1_CMD __REG(0x00214028) /* MMC/SD Command Number Register */ +#define MX1_ARGH __REG(0x0021402C) /* MMC/SD Higher Argument Register */ +#define MX1_ARGL __REG(0x00214030) /* MMC/SD Lower Argument Register */ +#define MX1_RES_FIFO __REG(0x00214034) /* MMC/SD Response FIFO Register */ #define MX1_BUFFER_ACCESS __REG(0x00214038) /* MMC/SD Buffer Access Register */ - - /* * MX1 ASP registers */ - -#define MX1_ASP_PADFIFO __REG(0x00215000) /* Pen Sample FIFO */ -#define MX1_ASP_VADFIFO __REG(0x00215004) /* Voice ADC Register */ -#define MX1_ASP_VDAFIFO __REG(0x00215008) /* Voice DAC Register */ -#define MX1_ASP_VADCOEF __REG(0x0021500C) /* Voice ADC FIR Coefficients RAM */ -#define MX1_ASP_ACNTLCR __REG(0x00215010) /* Control Register */ -#define MX1_ASP_PSMPLRG __REG(0x00215014) /* Pen A/D Sample Rate Control Register */ -#define MX1_ASP_ICNTLR __REG(0x00215018) /* Interrupt Control Register */ -#define MX1_ASP_ISTATR __REG(0x0021501C) /* Interrupt/Error Status Register */ -#define MX1_ASP_VADGAIN __REG(0x00215020) /* Voice ADC Control Register */ -#define MX1_ASP_VDAGAIN __REG(0x00215024) /* Voice DAC Control Register */ -#define MX1_ASP_VDACOEF __REG(0x00215028) /* Voice DAC FIR Coefficients RAM */ -#define MX1_ASP_CLKDIV __REG(0x0021502C) /* Clock Divide Register */ -#define MX1_ASP_CMPCNTL __REG(0x0021502C) /* Compare Control Register */ - - +#define MX1_ASP_PADFIFO __REG(0x00215000) /* Pen Sample FIFO */ +#define MX1_ASP_VADFIFO __REG(0x00215004) /* Voice ADC Register */ +#define MX1_ASP_VDAFIFO __REG(0x00215008) /* Voice DAC Register */ +#define MX1_ASP_VADCOEF __REG(0x0021500C) /* Voice ADC FIR Coefficients RAM */ +#define MX1_ASP_ACNTLCR __REG(0x00215010) /* Control Register */ +#define MX1_ASP_PSMPLRG __REG(0x00215014) /* Pen A/D Sample Rate Control Register */ +#define MX1_ASP_ICNTLR __REG(0x00215018) /* Interrupt Control Register */ +#define MX1_ASP_ISTATR __REG(0x0021501C) /* Interrupt/Error Status Register */ +#define MX1_ASP_VADGAIN __REG(0x00215020) /* Voice ADC Control Register */ +#define MX1_ASP_VDAGAIN __REG(0x00215024) /* Voice DAC Control Register */ +#define MX1_ASP_VDACOEF __REG(0x00215028) /* Voice DAC FIR Coefficients RAM */ +#define MX1_ASP_CLKDIV __REG(0x0021502C) /* Clock Divide Register */ +#define MX1_ASP_CMPCNTL __REG(0x0021502C) /* Compare Control Register */ /* * MX1 BTA registers */ - /* * MX1 I2C registers */ - -#define MX1_IADR __REG(0x00217000) /* I2C Address Register */ -#define MX1_IFDR __REG(0x00217004) /* I2C Frequency Divider Register */ -#define MX1_I2CR __REG(0x00217008) /* I2C Control Register */ -#define MX1_I2CSR __REG(0x0021700C) /* I2C Status Register */ -#define MX1_I2DR __REG(0x00217010) /* I2C Data I/O Register */ - - +#define MX1_IADR __REG(0x00217000) /* I2C Address Register */ +#define MX1_IFDR __REG(0x00217004) /* I2C Frequency Divider Register */ +#define MX1_I2CR __REG(0x00217008) /* I2C Control Register */ +#define MX1_I2CSR __REG(0x0021700C) /* I2C Status Register */ +#define MX1_I2DR __REG(0x00217010) /* I2C Data I/O Register */ /* * MX1 SSI registers */ - -#define MX1_STX __REG(0x00218000) /* SSI Transmit Data Register */ -#define MX1_SRX __REG(0x00218004) /* SSI Receive Data Register */ -#define MX1_SCSR __REG(0x00218008) /* SSI Control/Status Register */ -#define MX1_STCR __REG(0x0021800C) /* SSI Transmit Configuration Register */ -#define MX1_SRCR __REG(0x00218010) /* SSI Recieve Configuration Register */ -#define MX1_STCCR __REG(0x00218014) /* SSI Transmit Clock Control Register */ -#define MX1_SRCCR __REG(0x00218018) /* SSI Receive Clock Control Register */ -#define MX1_STSR __REG(0x0021801C) /* SSI Time Slot Register */ -#define MX1_SFCSR __REG(0x00218020) /* SSI FIFO Control/Status Register */ -#define MX1_SOR __REG(0x00218024) /* SSI Option Register */ - - +#define MX1_STX __REG(0x00218000) /* SSI Transmit Data Register */ +#define MX1_SRX __REG(0x00218004) /* SSI Receive Data Register */ +#define MX1_SCSR __REG(0x00218008) /* SSI Control/Status Register */ +#define MX1_STCR __REG(0x0021800C) /* SSI Transmit Configuration Register */ +#define MX1_SRCR __REG(0x00218010) /* SSI Recieve Configuration Register */ +#define MX1_STCCR __REG(0x00218014) /* SSI Transmit Clock Control Register */ +#define MX1_SRCCR __REG(0x00218018) /* SSI Receive Clock Control Register */ +#define MX1_STSR __REG(0x0021801C) /* SSI Time Slot Register */ +#define MX1_SFCSR __REG(0x00218020) /* SSI FIFO Control/Status Register */ +#define MX1_SOR __REG(0x00218024) /* SSI Option Register */ /* * MX1 SPI 2 registers */ - -#define MX1_RXDATAREG2 __REG(0x00219000) /* SPI 2 Rx Data Register */ -#define MX1_TXDATAREG2 __REG(0x00219004) /* SPI 2 Tx Data Register */ -#define MX1_CONTROLREG2 __REG(0x00219008) /* SPI 2 Control Register */ -#define MX1_INTREG2 __REG(0x0021900C) /* SPI 2 Interrupt Control/Status Register */ -#define MX1_TESTREG2 __REG(0x00219010) /* SPI 2 Test Register */ -#define MX1_PERIODREG2 __REG(0x00219014) /* SPI 2 Sample Period Control Register */ -#define MX1_DMAREG2 __REG(0x00219018) /* SPI 2 DMA Control Register */ -#define MX1_RESETREG2 __REG(0x00219018) /* SPI 2 Soft Reset Register */ - - +#define MX1_RXDATAREG2 __REG(0x00219000) /* SPI 2 Rx Data Register */ +#define MX1_TXDATAREG2 __REG(0x00219004) /* SPI 2 Tx Data Register */ +#define MX1_CONTROLREG2 __REG(0x00219008) /* SPI 2 Control Register */ +#define MX1_INTREG2 __REG(0x0021900C) /* SPI 2 Interrupt Control/Status Register */ +#define MX1_TESTREG2 __REG(0x00219010) /* SPI 2 Test Register */ +#define MX1_PERIODREG2 __REG(0x00219014) /* SPI 2 Sample Period Control Register */ +#define MX1_DMAREG2 __REG(0x00219018) /* SPI 2 DMA Control Register */ +#define MX1_RESETREG2 __REG(0x00219018) /* SPI 2 Soft Reset Register */ /* * MX1 MSHC registers */ - -#define MX1_MSCMD __REG(0x0021A000) /* Memory Stick Command Register */ -#define MX1_MSCS __REG(0x0021A002) /* Memory Stick Control/Status Register */ -#define MX1_MSTDATA __REG(0x0021A004) /* Memory Stick Transmit FIFO Data Register */ -#define MX1_MSRDATA __REG(0x0021A004) /* Memory Stick Recieve FIFO Data Register */ -#define MX1_MSICS __REG(0x0021A006) /* Memory Stick Interrupt Control/Status Register */ -#define MX1_MSPPCD __REG(0x0021A008) /* Memory Stick Parallel Port Control/Data Register */ -#define MX1_MSC2 __REG(0x0021A00A) /* Memory Stick Control 2 Register */ -#define MX1_MSACD __REG(0x0021A00C) /* Memory Stick Auto Command Register */ -#define MX1_MSFAECS __REG(0x0021A00E) /* Memory Stick FIFO Access Error Control/Status Register */ -#define MX1_MSCLKD __REG(0x0021A010) /* Memory Stick Serial Clock divider Register */ -#define MX1_MSDRQC __REG(0x0021A012) /* Memory Stick DMA Request Control Register */ - - +#define MX1_MSCMD __REG(0x0021A000) /* Memory Stick Command Register */ +#define MX1_MSCS __REG(0x0021A002) /* Memory Stick Control/Status Register */ +#define MX1_MSTDATA __REG(0x0021A004) /* Memory Stick Transmit FIFO Data Register */ +#define MX1_MSRDATA __REG(0x0021A004) /* Memory Stick Recieve FIFO Data Register */ +#define MX1_MSICS __REG(0x0021A006) /* Memory Stick Interrupt Control/Status Register */ +#define MX1_MSPPCD __REG(0x0021A008) /* Memory Stick Parallel Port Control/Data Register */ +#define MX1_MSC2 __REG(0x0021A00A) /* Memory Stick Control 2 Register */ +#define MX1_MSACD __REG(0x0021A00C) /* Memory Stick Auto Command Register */ +#define MX1_MSFAECS __REG(0x0021A00E) /* Memory Stick FIFO Access Error Control/Status Register */ +#define MX1_MSCLKD __REG(0x0021A010) /* Memory Stick Serial Clock divider Register */ +#define MX1_MSDRQC __REG(0x0021A012) /* Memory Stick DMA Request Control Register */ /* * MX1 PLLCLK registers */ - -#define MX1_CSCR __REG(0x0021B000) /* Clock Source Control Register */ -#define MX1_MPCTL0 __REG(0x0021B004) /* MCU PLL Control Register 0 */ +#define MX1_CSCR __REG(0x0021B000) /* Clock Source Control Register */ +#define MX1_MPCTL0 __REG(0x0021B004) /* MCU PLL Control Register 0 */ #define MX1_MPCTL1 __REG(0x0021B008) /* MCU PLL & System Clock Control Register 1 */ #define MX1_UPCTL0 __REG(0x0021B00C) /* USB PLL Control Register 0 */ #define MX1_UPCTL1 __REG(0x0021B010) /* USB PLL Control Register 1 */ -#define MX1_PCDR __REG(0x0021B020) /* Peripheral Clock Divider Register */ - +#define MX1_PCDR __REG(0x0021B020) /* Peripheral Clock Divider Register */ /* * MX1 RESET registers */ - -#define MX1_RSR __REG(0x0021B800) /* Reset Source Register */ - - +#define MX1_RSR __REG(0x0021B800) /* Reset Source Register */ /* * MX1 SYS CTRL registers */ - -#define MX1_SIDR __REG(0x0021B804) /* Silicon ID Register */ -#define MX1_FMCR __REG(0x0021B808) /* Function MultiPlexing Control Register */ -#define MX1_GPCR __REG(0x0021B80C) /* Global Peripheral Control Register */ - +#define MX1_SIDR __REG(0x0021B804) /* Silicon ID Register */ +#define MX1_FMCR __REG(0x0021B808) /* Function MultiPlexing Control Register */ +#define MX1_GPCR __REG(0x0021B80C) /* Global Peripheral Control Register */ /* * MX1 GPIO registers */ /* Port A */ -#define MX1_DDIR_A __REG(0x0021C000) /* Port A Data Direction Register */ +#define MX1_DDIR_A __REG(0x0021C000) /* Port A Data Direction Register */ #define MX1_OCR1_A __REG(0x0021C004) /* Port A Output Configuration Register 1 */ #define MX1_OCR2_A __REG(0x0021C008) /* Port A Output Configuration Register 2 */ #define MX1_ICONFA1_A __REG(0x0021C00C) /* Port A Input Configuration Register A1 */ #define MX1_ICONFA2_A __REG(0x0021C010) /* Port A Input Configuration Register A2 */ #define MX1_ICONFB1_A __REG(0x0021C014) /* Port A Input Configuration Register B1 */ #define MX1_ICONFB2_A __REG(0x0021C018) /* Port A Input Configuration Register B2 */ -#define MX1_DR_A __REG(0x0021C01C) /* Port A Data Register */ -#define MX1_GIUS_A __REG(0x0021C020) /* Port A GPIO In Use Register */ -#define MX1_SSR_A __REG(0x0021C024) /* Port A Sample Status Register */ -#define MX1_ICR1_A __REG(0x0021C028) /* Port A Interrupt Configuration Register 1 */ -#define MX1_ICR2_A __REG(0x0021C02C) /* Port A Interrupt Configuration Register 2 */ +#define MX1_DR_A __REG(0x0021C01C) /* Port A Data Register */ +#define MX1_GIUS_A __REG(0x0021C020) /* Port A GPIO In Use Register */ +#define MX1_SSR_A __REG(0x0021C024) /* Port A Sample Status Register */ +#define MX1_ICR1_A __REG(0x0021C028) /* Port A Interrupt Configuration Register 1 */ +#define MX1_ICR2_A __REG(0x0021C02C) /* Port A Interrupt Configuration Register 2 */ #define MX1_IMR_A __REG(0x0021C030) /* Port A Interrupt Mask Register */ #define MX1_ISR_A __REG(0x0021C034) /* Port A Interrupt Status Register */ #define MX1_GPR_A __REG(0x0021C038) /* Port A General Purpose Register */ #define MX1_SWR_A __REG(0x0021C03C) /* Port A Software Reset Register */ #define MX1_PUEN_A __REG(0x0021C040) /* Port A Pull Up Enable Register */ - /* Port B */ -#define MX1_DDIR_B __REG(0x0021C100) /* Port B Data Direction Register */ +#define MX1_DDIR_B __REG(0x0021C100) /* Port B Data Direction Register */ #define MX1_OCR1_B __REG(0x0021C104) /* Port B Output Configuration Register 1 */ #define MX1_OCR2_B __REG(0x0021C108) /* Port B Output Configuration Register 2 */ #define MX1_ICONFA1_B __REG(0x0021C10C) /* Port B Input Configuration Register A1 */ #define MX1_ICONFA2_B __REG(0x0021C110) /* Port B Input Configuration Register A2 */ #define MX1_ICONFB1_B __REG(0x0021C114) /* Port B Input Configuration Register B1 */ #define MX1_ICONFB2_B __REG(0x0021C118) /* Port B Input Configuration Register B2 */ -#define MX1_DR_B __REG(0x0021C11C) /* Port B Data Register */ -#define MX1_GIUS_B __REG(0x0021C120) /* Port B GPIO In Use Register */ -#define MX1_SSR_B __REG(0x0021C124) /* Port B Sample Status Register */ -#define MX1_ICR1_B __REG(0x0021C128) /* Port B Interrupt Configuration Register 1 */ -#define MX1_ICR2_B __REG(0x0021C12C) /* Port B Interrupt Configuration Register 2 */ +#define MX1_DR_B __REG(0x0021C11C) /* Port B Data Register */ +#define MX1_GIUS_B __REG(0x0021C120) /* Port B GPIO In Use Register */ +#define MX1_SSR_B __REG(0x0021C124) /* Port B Sample Status Register */ +#define MX1_ICR1_B __REG(0x0021C128) /* Port B Interrupt Configuration Register 1 */ +#define MX1_ICR2_B __REG(0x0021C12C) /* Port B Interrupt Configuration Register 2 */ #define MX1_IMR_B __REG(0x0021C130) /* Port B Interrupt Mask Register */ #define MX1_ISR_B __REG(0x0021C134) /* Port B Interrupt Status Register */ #define MX1_GPR_B __REG(0x0021C138) /* Port B General Purpose Register */ #define MX1_SWR_B __REG(0x0021C13C) /* Port B Software Reset Register */ #define MX1_PUEN_B __REG(0x0021C140) /* Port B Pull Up Enable Register */ - - /* Port C */ -#define MX1_DDIR_C __REG(0x0021C200) /* Port C Data Direction Register */ +#define MX1_DDIR_C __REG(0x0021C200) /* Port C Data Direction Register */ #define MX1_OCR1_C __REG(0x0021C204) /* Port C Output Configuration Register 1 */ #define MX1_OCR2_C __REG(0x0021C208) /* Port C Output Configuration Register 2 */ #define MX1_ICONFA1_C __REG(0x0021C20C) /* Port C Input Configuration Register A1 */ #define MX1_ICONFA2_C __REG(0x0021C210) /* Port C Input Configuration Register A2 */ #define MX1_ICONFB1_C __REG(0x0021C214) /* Port C Input Configuration Register B1 */ #define MX1_ICONFB2_C __REG(0x0021C218) /* Port C Input Configuration Register B2 */ -#define MX1_DR_C __REG(0x0021C21C) /* Port C Data Register */ -#define MX1_GIUS_C __REG(0x0021C220) /* Port C GPIO In Use Register */ -#define MX1_SSR_C __REG(0x0021C224) /* Port C Sample Status Register */ -#define MX1_ICR1_C __REG(0x0021C228) /* Port C Interrupt Configuration Register 1 */ -#define MX1_ICR2_C __REG(0x0021C22C) /* Port C Interrupt Configuration Register 2 */ +#define MX1_DR_C __REG(0x0021C21C) /* Port C Data Register */ +#define MX1_GIUS_C __REG(0x0021C220) /* Port C GPIO In Use Register */ +#define MX1_SSR_C __REG(0x0021C224) /* Port C Sample Status Register */ +#define MX1_ICR1_C __REG(0x0021C228) /* Port C Interrupt Configuration Register 1 */ +#define MX1_ICR2_C __REG(0x0021C22C) /* Port C Interrupt Configuration Register 2 */ #define MX1_IMR_C __REG(0x0021C230) /* Port C Interrupt Mask Register */ #define MX1_ISR_C __REG(0x0021C234) /* Port C Interrupt Status Register */ #define MX1_GPR_C __REG(0x0021C238) /* Port C General Purpose Register */ #define MX1_SWR_C __REG(0x0021C23C) /* Port C Software Reset Register */ #define MX1_PUEN_C __REG(0x0021C240) /* Port C Pull Up Enable Register */ - - /* Port D */ -#define MX1_DDIR_D __REG(0x0021C300) /* Port D Data Direction Register */ +#define MX1_DDIR_D __REG(0x0021C300) /* Port D Data Direction Register */ #define MX1_OCR1_D __REG(0x0021C304) /* Port D Output Configuration Register 1 */ #define MX1_OCR2_D __REG(0x0021C308) /* Port D Output Configuration Register 2 */ #define MX1_ICONFA1_D __REG(0x0021C30C) /* Port D Input Configuration Register A1 */ #define MX1_ICONFA2_D __REG(0x0021C310) /* Port D Input Configuration Register A2 */ #define MX1_ICONFB1_D __REG(0x0021C314) /* Port D Input Configuration Register B1 */ #define MX1_ICONFB2_D __REG(0x0021C318) /* Port D Input Configuration Register B2 */ -#define MX1_DR_D __REG(0x0021C31C) /* Port D Data Register */ -#define MX1_GIUS_D __REG(0x0021C320) /* Port D GPIO In Use Register */ -#define MX1_SSR_D __REG(0x0021C324) /* Port D Sample Status Register */ -#define MX1_ICR1_D __REG(0x0021C328) /* Port D Interrupt Configuration Register 1 */ -#define MX1_ICR2_D __REG(0x0021C32C) /* Port D Interrupt Configuration Register 2 */ +#define MX1_DR_D __REG(0x0021C31C) /* Port D Data Register */ +#define MX1_GIUS_D __REG(0x0021C320) /* Port D GPIO In Use Register */ +#define MX1_SSR_D __REG(0x0021C324) /* Port D Sample Status Register */ +#define MX1_ICR1_D __REG(0x0021C328) /* Port D Interrupt Configuration Register 1 */ +#define MX1_ICR2_D __REG(0x0021C32C) /* Port D Interrupt Configuration Register 2 */ #define MX1_IMR_D __REG(0x0021C330) /* Port D Interrupt Mask Register */ #define MX1_ISR_D __REG(0x0021C334) /* Port D Interrupt Status Register */ #define MX1_GPR_D __REG(0x0021C338) /* Port D General Purpose Register */ #define MX1_SWR_D __REG(0x0021C33C) /* Port D Software Reset Register */ #define MX1_PUEN_D __REG(0x0021C340) /* Port D Pull Up Enable Register */ - - /* * MX1 EIM registers */ - -#define MX1_CS0U __REG(0x00220000) /* Chip Select 0 Upper Control Register */ -#define MX1_CS0L __REG(0x00220004) /* Chip Select 0 Lower Control Register */ -#define MX1_CS1U __REG(0x00220008) /* Chip Select 1 Upper Control Register */ -#define MX1_CS1L __REG(0x0022000C) /* Chip Select 1 Lower Control Register */ -#define MX1_CS2U __REG(0x00220010) /* Chip Select 2 Upper Control Register */ -#define MX1_CS2L __REG(0x00220014) /* Chip Select 2 Lower Control Register */ -#define MX1_CS3U __REG(0x00220018) /* Chip Select 3 Upper Control Register */ -#define MX1_CS3L __REG(0x0022001C) /* Chip Select 3 Lower Control Register */ -#define MX1_CS4U __REG(0x00220020) /* Chip Select 4 Upper Control Register */ -#define MX1_CS4L __REG(0x00220024) /* Chip Select 4 Lower Control Register */ -#define MX1_CS5U __REG(0x00220028) /* Chip Select 5 Upper Control Register */ -#define MX1_CS5L __REG(0x0022002C) /* Chip Select 5 Lower Control Register */ -#define MX1_WEIM __REG(0x00220030) /* weim cONFIGURATION Register */ - - +#define MX1_CS0U __REG(0x00220000) /* Chip Select 0 Upper Control Register */ +#define MX1_CS0L __REG(0x00220004) /* Chip Select 0 Lower Control Register */ +#define MX1_CS1U __REG(0x00220008) /* Chip Select 1 Upper Control Register */ +#define MX1_CS1L __REG(0x0022000C) /* Chip Select 1 Lower Control Register */ +#define MX1_CS2U __REG(0x00220010) /* Chip Select 2 Upper Control Register */ +#define MX1_CS2L __REG(0x00220014) /* Chip Select 2 Lower Control Register */ +#define MX1_CS3U __REG(0x00220018) /* Chip Select 3 Upper Control Register */ +#define MX1_CS3L __REG(0x0022001C) /* Chip Select 3 Lower Control Register */ +#define MX1_CS4U __REG(0x00220020) /* Chip Select 4 Upper Control Register */ +#define MX1_CS4L __REG(0x00220024) /* Chip Select 4 Lower Control Register */ +#define MX1_CS5U __REG(0x00220028) /* Chip Select 5 Upper Control Register */ +#define MX1_CS5L __REG(0x0022002C) /* Chip Select 5 Lower Control Register */ +#define MX1_WEIM __REG(0x00220030) /* weim cONFIGURATION Register */ /* * MX1 SDRAMC registers */ - -#define MX1_SDCTL0 __REG(0x00221000) /* SDRAM 0 Control Register */ -#define MX1_SDCTL1 __REG(0x00221004) /* SDRAM 1 Control Register */ -#define MX1_MISCELLANEOUS __REG(0x00221014) /* Miscellaneous Register */ -#define MX1_SDRST __REG(0x00221018) /* SDRAM Reset Register */ - - +#define MX1_SDCTL0 __REG(0x00221000) /* SDRAM 0 Control Register */ +#define MX1_SDCTL1 __REG(0x00221004) /* SDRAM 1 Control Register */ +#define MX1_MISCELLANEOUS __REG(0x00221014) /* Miscellaneous Register */ +#define MX1_SDRST __REG(0x00221018) /* SDRAM Reset Register */ /* * MX1 MMA registers */ - -#define MX1_MMA_MAC_MOD __REG(0x00222000) /* MMA MAC Module Register */ -#define MX1_MMA_MAC_CTRL __REG(0x00222004) /* MMA MAC Control Register */ -#define MX1_MMA_MAC_MULT __REG(0x00222008) /* MMA MAC Multiply Counter Register */ -#define MX1_MMA_MAC_ACCU __REG(0x0022200C) /* MMA MAC Accumulate Counter Register */ -#define MX1_MMA_MAC_INTR __REG(0x00222010) /* MMA MAC Interrupt Register */ -#define MX1_MMA_MAC_INTR_MASK __REG(0x00222014) /* MMA MAC Interrupt Mask Register */ -#define MX1_MMA_MAC_FIFO __REG(0x00222018) /* MMA MAC FIFO Register */ -#define MX1_MMA_MAC_FIFO_STAT __REG(0x0022201C) /* MMA MAC FIFO Status Register */ -#define MX1_MMA_MAC_BURST __REG(0x00222020) /* MMA MAC Burst Count Register */ -#define MX1_MMA_MAC_BITSEL __REG(0x00222024) /* MMA MAC Bit Select Register */ +#define MX1_MMA_MAC_MOD __REG(0x00222000) /* MMA MAC Module Register */ +#define MX1_MMA_MAC_CTRL __REG(0x00222004) /* MMA MAC Control Register */ +#define MX1_MMA_MAC_MULT __REG(0x00222008) /* MMA MAC Multiply Counter Register */ +#define MX1_MMA_MAC_ACCU __REG(0x0022200C) /* MMA MAC Accumulate Counter Register */ +#define MX1_MMA_MAC_INTR __REG(0x00222010) /* MMA MAC Interrupt Register */ +#define MX1_MMA_MAC_INTR_MASK __REG(0x00222014) /* MMA MAC Interrupt Mask Register */ +#define MX1_MMA_MAC_FIFO __REG(0x00222018) /* MMA MAC FIFO Register */ +#define MX1_MMA_MAC_FIFO_STAT __REG(0x0022201C) /* MMA MAC FIFO Status Register */ +#define MX1_MMA_MAC_BURST __REG(0x00222020) /* MMA MAC Burst Count Register */ +#define MX1_MMA_MAC_BITSEL __REG(0x00222024) /* MMA MAC Bit Select Register */ #define MX1_MMA_MAC_XBASE __REG(0x00222200) /* MMA MAC X Base Address Register */ -#define MX1_MMA_MAC_XINDEX __REG(0x00222204) /* MMA MAC X Index Register */ -#define MX1_MMA_MAC_XLENGTH __REG(0x00222208) /* MMA MAC X Length Register */ -#define MX1_MMA_MAC_XMODIFY __REG(0x0022220C) /* MMA MAC X Modify Register */ -#define MX1_MMA_MAC_XINCR __REG(0x00222210) /* MMA MAC X Increment Register */ -#define MX1_MMA_MAC_XCOUNT __REG(0x00222214) /* MMA MAC X Count Register */ - +#define MX1_MMA_MAC_XINDEX __REG(0x00222204) /* MMA MAC X Index Register */ +#define MX1_MMA_MAC_XLENGTH __REG(0x00222208) /* MMA MAC X Length Register */ +#define MX1_MMA_MAC_XMODIFY __REG(0x0022220C) /* MMA MAC X Modify Register */ +#define MX1_MMA_MAC_XINCR __REG(0x00222210) /* MMA MAC X Increment Register */ +#define MX1_MMA_MAC_XCOUNT __REG(0x00222214) /* MMA MAC X Count Register */ #define MX1_MMA_MAC_YBASE __REG(0x00222300) /* MMA MAC Y Base Address Register */ -#define MX1_MMA_MAC_YINDEX __REG(0x00222304) /* MMA MAC Y Index Register */ -#define MX1_MMA_MAC_YLENGTH __REG(0x00222308) /* MMA MAC Y Length Register */ -#define MX1_MMA_MAC_YMODIFY __REG(0x0022230C) /* MMA MAC Y Modify Register */ -#define MX1_MMA_MAC_YINCR __REG(0x00222310) /* MMA MAC Y Increment Register */ -#define MX1_MMA_MAC_YCOUNT __REG(0x00222314) /* MMA MAC Y Count Register */ - - -#define MX1_MMA_DCTCTRL __REG(0x00222400) /* DCT/iDCT Control Register */ -#define MX1_MMA_DCTVERSION __REG(0x00222404) /* DCT/iDCT Version Register */ -#define MX1_MMA_DCTIRQENA __REG(0x00222408) /* DCT/iDCT IRQ Enable Register */ -#define MX1_MMA_DCTIRQSTAT __REG(0x0022240C) /* DCT/iDCT IRQ Status Register */ -#define MX1_MMA_DCTSRCDATA __REG(0x00222410) /* DCT/iDCT Source Data Address */ -#define MX1_MMA_DCTDESDATA __REG(0x00222414) /* DCT/iDCT Destination Data Address */ -#define MX1_MMA_DCTXOFF __REG(0x00222418) /* DCT/iDCT X-Offset Address */ -#define MX1_MMA_DCTYOFF __REG(0x0022241C) /* DCT/iDCT Y-Offset Address */ -#define MX1_MMA_DCTXYCNT __REG(0x00222420) /* DCT/iDCT XY Count */ -#define MX1_MMA_DCTSKIP __REG(0x00222424) /* DCT/iDCT Skip Address */ -#define MX1_MMA_DCTFIFO __REG(0x00222500) /* DCT/iDCT Data FIFO */ - - - +#define MX1_MMA_MAC_YINDEX __REG(0x00222304) /* MMA MAC Y Index Register */ +#define MX1_MMA_MAC_YLENGTH __REG(0x00222308) /* MMA MAC Y Length Register */ +#define MX1_MMA_MAC_YMODIFY __REG(0x0022230C) /* MMA MAC Y Modify Register */ +#define MX1_MMA_MAC_YINCR __REG(0x00222310) /* MMA MAC Y Increment Register */ +#define MX1_MMA_MAC_YCOUNT __REG(0x00222314) /* MMA MAC Y Count Register */ + +#define MX1_MMA_DCTCTRL __REG(0x00222400) /* DCT/iDCT Control Register */ +#define MX1_MMA_DCTVERSION __REG(0x00222404) /* DCT/iDCT Version Register */ +#define MX1_MMA_DCTIRQENA __REG(0x00222408) /* DCT/iDCT IRQ Enable Register */ +#define MX1_MMA_DCTIRQSTAT __REG(0x0022240C) /* DCT/iDCT IRQ Status Register */ +#define MX1_MMA_DCTSRCDATA __REG(0x00222410) /* DCT/iDCT Source Data Address */ +#define MX1_MMA_DCTDESDATA __REG(0x00222414) /* DCT/iDCT Destination Data Address */ +#define MX1_MMA_DCTXOFF __REG(0x00222418) /* DCT/iDCT X-Offset Address */ +#define MX1_MMA_DCTYOFF __REG(0x0022241C) /* DCT/iDCT Y-Offset Address */ +#define MX1_MMA_DCTXYCNT __REG(0x00222420) /* DCT/iDCT XY Count */ +#define MX1_MMA_DCTSKIP __REG(0x00222424) /* DCT/iDCT Skip Address */ +#define MX1_MMA_DCTFIFO __REG(0x00222500) /* DCT/iDCT Data FIFO */ /* * MX1 AITC registers */ - -#define MX1_INTCNTL __REG(0x00223000) /* Interrupt Control Register */ -#define MX1_NIMASK __REG(0x00223004) /* Normal Interrupt Mask Register */ -#define MX1_INTENNUM __REG(0x00223008) /* Interrupt Enable Number Register */ -#define MX1_INTDISNUM __REG(0x0022300C) /* Interrupt Disable Number Register */ -#define MX1_INTENABLEH __REG(0x00223010) /* Interrupt Enable Register High */ -#define MX1_INTENABLEL __REG(0x00223014) /* Interrupt Enable Register Low */ -#define MX1_INTTYPEH __REG(0x00223018) /* Interrupt Type Register High */ -#define MX1_INTTYPEL __REG(0x0022301C) /* Interrupt Type Register Low */ -#define MX1_NIPRIORITY7 __REG(0x00223020) /* Normal Interrupt Priority Level Register 7*/ -#define MX1_NIPRIORITY6 __REG(0x00223024) /* Normal Interrupt Priority Level Register 6*/ -#define MX1_NIPRIORITY5 __REG(0x00223028) /* Normal Interrupt Priority Level Register 5*/ -#define MX1_NIPRIORITY4 __REG(0x0022302C) /* Normal Interrupt Priority Level Register 4*/ -#define MX1_NIPRIORITY3 __REG(0x00223030) /* Normal Interrupt Priority Level Register 3*/ -#define MX1_NIPRIORITY2 __REG(0x00223034) /* Normal Interrupt Priority Level Register 2*/ -#define MX1_NIPRIORITY1 __REG(0x00223038) /* Normal Interrupt Priority Level Register 1*/ -#define MX1_NIPRIORITY0 __REG(0x0022303C) /* Normal Interrupt Priority Level Register 0*/ +#define MX1_INTCNTL __REG(0x00223000) /* Interrupt Control Register */ +#define MX1_NIMASK __REG(0x00223004) /* Normal Interrupt Mask Register */ +#define MX1_INTENNUM __REG(0x00223008) /* Interrupt Enable Number Register */ +#define MX1_INTDISNUM __REG(0x0022300C) /* Interrupt Disable Number Register */ +#define MX1_INTENABLEH __REG(0x00223010) /* Interrupt Enable Register High */ +#define MX1_INTENABLEL __REG(0x00223014) /* Interrupt Enable Register Low */ +#define MX1_INTTYPEH __REG(0x00223018) /* Interrupt Type Register High */ +#define MX1_INTTYPEL __REG(0x0022301C) /* Interrupt Type Register Low */ +#define MX1_NIPRIORITY7 __REG(0x00223020) /* Normal Interrupt Priority Level Register 7*/ +#define MX1_NIPRIORITY6 __REG(0x00223024) /* Normal Interrupt Priority Level Register 6*/ +#define MX1_NIPRIORITY5 __REG(0x00223028) /* Normal Interrupt Priority Level Register 5*/ +#define MX1_NIPRIORITY4 __REG(0x0022302C) /* Normal Interrupt Priority Level Register 4*/ +#define MX1_NIPRIORITY3 __REG(0x00223030) /* Normal Interrupt Priority Level Register 3*/ +#define MX1_NIPRIORITY2 __REG(0x00223034) /* Normal Interrupt Priority Level Register 2*/ +#define MX1_NIPRIORITY1 __REG(0x00223038) /* Normal Interrupt Priority Level Register 1*/ +#define MX1_NIPRIORITY0 __REG(0x0022303C) /* Normal Interrupt Priority Level Register 0*/ #define MX1_NIVECSR __REG(0x00223040) /* Normal Interrupt Vector & Status Register */ #define MX1_FIVECSR __REG(0x00223044) /* Fast Interrupt Vector & Status Register */ -#define MX1_INTSRCH __REG(0x00223048) /* Interrupt Source Register High */ -#define MX1_INTSRCL __REG(0x0022304C) /* Interrupt Source Register Low */ -#define MX1_INTFRCH __REG(0x00223050) /* Interrupt Force Register High */ -#define MX1_INTFRCL __REG(0x00223054) /* Interrupt Force Register Low */ -#define MX1_NIPNDH __REG(0x00223058) /* Normal Interrupt Pending Register High */ -#define MX1_NIPNDL __REG(0x0022305C) /* Normal Interrupt Pending Register Low */ -#define MX1_FIPNDH __REG(0x00223060) /* Fast Interrupt Pending Register High */ -#define MX1_FIPNDL __REG(0x00223064) /* Fast Interrupt Pending Register Low */ - +#define MX1_INTSRCH __REG(0x00223048) /* Interrupt Source Register High */ +#define MX1_INTSRCL __REG(0x0022304C) /* Interrupt Source Register Low */ +#define MX1_INTFRCH __REG(0x00223050) /* Interrupt Force Register High */ +#define MX1_INTFRCL __REG(0x00223054) /* Interrupt Force Register Low */ +#define MX1_NIPNDH __REG(0x00223058) /* Normal Interrupt Pending Register High */ +#define MX1_NIPNDL __REG(0x0022305C) /* Normal Interrupt Pending Register Low */ +#define MX1_FIPNDH __REG(0x00223060) /* Fast Interrupt Pending Register High */ +#define MX1_FIPNDL __REG(0x00223064) /* Fast Interrupt Pending Register Low */ /* * MX1 CSI registers */ - -#define MX1_CSICR1 __REG(0x00224000) /* CSI Control Register 1 */ -#define MX1_CSICR2 __REG(0x00224004) /* CSI Control Register 2 */ -#define MX1_CSISR __REG(0x00224008) /* CSI Status Register 1 */ +#define MX1_CSICR1 __REG(0x00224000) /* CSI Control Register 1 */ +#define MX1_CSICR2 __REG(0x00224004) /* CSI Control Register 2 */ +#define MX1_CSISR __REG(0x00224008) /* CSI Status Register 1 */ #define MX1_CSISTATR __REG(0x0022400C) /* CSI Statistic FIFO Register 1 */ #define MX1_CSIRXR __REG(0x00224010) /* CSI RxFIFO Register 1 */ - - #endif /* __MC9328_H__ */ - - - - - - - - - - - - - - - - - - - - - - #if 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - /* - MX1 dma definition + MX1 dma definition */ #define MAX_DMA_ADDRESS 0xffffffff -//#define MAX_DMA_CHANNELS 0 +/*#define MAX_DMA_CHANNELS 0 */ -#define MAX_DMA_CHANNELS 11 +#define MAX_DMA_CHANNELS 11 #define MAX_DMA_2D_REGSET 2 /* MX1 DMA module registers' address */ -#define MX1_DMA_BASE IO_ADDRESS(0x00209000) -#define MX1_DMA_DCR (MX1_DMA_BASE + 0x00) // DMA control register -#define MX1_DMA_DISR (MX1_DMA_BASE + 0x04) // DMA interrupt status register -#define MX1_DMA_DIMR (MX1_DMA_BASE + 0x08) // DMA interrupt mask register -#define MX1_DMA_DBTOSR (MX1_DMA_BASE + 0x0C) // DMA burst time-out status register -#define MX1_DMA_DRTOSR (MX1_DMA_BASE + 0x10) // DMA request time-out status register -#define MX1_DMA_DSESR (MX1_DMA_BASE + 0x14) // DMA transfer error status register -#define MX1_DMA_DBOSR (MX1_DMA_BASE + 0x18) // DMA buffer overflow status register -#define MX1_DMA_DBTOCR (MX1_DMA_BASE + 0x1C) // DMA burst time-out control register -#define MX1_DMA_WSRA (MX1_DMA_BASE + 0x40) // W-size register A -#define MX1_DMA_XSRA (MX1_DMA_BASE + 0x44) // X-size register A -#define MX1_DMA_YSRA (MX1_DMA_BASE + 0x48) // Y-size register A -#define MX1_DMA_WSRB (MX1_DMA_BASE + 0x4C) // W-size register B -#define MX1_DMA_XSRB (MX1_DMA_BASE + 0x50) // X-size register B -#define MX1_DMA_YSRB (MX1_DMA_BASE + 0x54) // Y-size register B - -#define MX1_DMA_SAR0 (MX1_DMA_BASE + 0x80) // source address register 0 -#define MX1_DMA_DAR0 (MX1_DMA_BASE + 0x84) // destination address register 0 -#define MX1_DMA_CNTR0 (MX1_DMA_BASE + 0x88) // count register 0 -#define MX1_DMA_CCR0 (MX1_DMA_BASE + 0x8C) // channel control register 0 -#define MX1_DMA_RSSR0 (MX1_DMA_BASE + 0x90) // request source select register 0 -#define MX1_DMA_BLR0 (MX1_DMA_BASE + 0x94) // burst length register 0 -#define MX1_DMA_RTOR0 (MX1_DMA_BASE + 0x98) // request time-out register 0 -#define MX1_DMA_BUCR0 (MX1_DMA_BASE + 0x98) // bus utilization control register 0 +#define MX1_DMA_BASE IO_ADDRESS(0x00209000) +#define MX1_DMA_DCR (MX1_DMA_BASE + 0x00) /* DMA control register */ +#define MX1_DMA_DISR (MX1_DMA_BASE + 0x04) /* DMA interrupt status register */ +#define MX1_DMA_DIMR (MX1_DMA_BASE + 0x08) /* DMA interrupt mask register */ +#define MX1_DMA_DBTOSR (MX1_DMA_BASE + 0x0C) /* DMA burst time-out status register */ +#define MX1_DMA_DRTOSR (MX1_DMA_BASE + 0x10) /* DMA request time-out status register */ +#define MX1_DMA_DSESR (MX1_DMA_BASE + 0x14) /* DMA transfer error status register */ +#define MX1_DMA_DBOSR (MX1_DMA_BASE + 0x18) /* DMA buffer overflow status register */ +#define MX1_DMA_DBTOCR (MX1_DMA_BASE + 0x1C) /* DMA burst time-out control register */ +#define MX1_DMA_WSRA (MX1_DMA_BASE + 0x40) /* W-size register A */ +#define MX1_DMA_XSRA (MX1_DMA_BASE + 0x44) /* X-size register A */ +#define MX1_DMA_YSRA (MX1_DMA_BASE + 0x48) /* Y-size register A */ +#define MX1_DMA_WSRB (MX1_DMA_BASE + 0x4C) /* W-size register B */ +#define MX1_DMA_XSRB (MX1_DMA_BASE + 0x50) /* X-size register B */ +#define MX1_DMA_YSRB (MX1_DMA_BASE + 0x54) /* Y-size register B */ + +#define MX1_DMA_SAR0 (MX1_DMA_BASE + 0x80) /* source address register 0 */ +#define MX1_DMA_DAR0 (MX1_DMA_BASE + 0x84) /* destination address register 0 */ +#define MX1_DMA_CNTR0 (MX1_DMA_BASE + 0x88) /* count register 0 */ +#define MX1_DMA_CCR0 (MX1_DMA_BASE + 0x8C) /* channel control register 0 */ +#define MX1_DMA_RSSR0 (MX1_DMA_BASE + 0x90) /* request source select register 0 */ +#define MX1_DMA_BLR0 (MX1_DMA_BASE + 0x94) /* burst length register 0 */ +#define MX1_DMA_RTOR0 (MX1_DMA_BASE + 0x98) /* request time-out register 0 */ +#define MX1_DMA_BUCR0 (MX1_DMA_BASE + 0x98) /* bus utilization control register 0 */ /* register set 1 to 10 are offseted by 0x40 each = 0x10 pointers away */ -#define DMA_REG_SET_OFS 0x10 - +#define DMA_REG_SET_OFS 0x10 /* MX1 DMA module registers */ -#define _reg_DMA_DCR (*((P_VU32)MX1_DMA_DCR)) -#define _reg_DMA_DISR (*((P_VU32)MX1_DMA_DISR)) -#define _reg_DMA_DIMR (*((P_VU32)MX1_DMA_DIMR)) -#define _reg_DMA_DBTOSR (*((P_VU32)MX1_DMA_DBTOSR)) -#define _reg_DMA_DRTOSR (*((P_VU32)MX1_DMA_DRTOSR)) -#define _reg_DMA_DSESR (*((P_VU32)MX1_DMA_DSESR)) -#define _reg_DMA_DBOSR (*((P_VU32)MX1_DMA_DBOSR)) -#define _reg_DMA_DBTOCR (*((P_VU32)MX1_DMA_DBTOCR)) -#define _reg_DMA_WSRA (*((P_VU32)MX1_DMA_WSRA)) -#define _reg_DMA_XSRA (*((P_VU32)MX1_DMA_XSRA)) -#define _reg_DMA_YSRA (*((P_VU32)MX1_DMA_YSRA)) -#define _reg_DMA_WSRB (*((P_VU32)MX1_DMA_WSRB)) -#define _reg_DMA_XSRB (*((P_VU32)MX1_DMA_XSRB)) -#define _reg_DMA_YSRB (*((P_VU32)MX1_DMA_YSRB)) -#define _reg_DMA_SAR0 (*((P_VU32)MX1_DMA_SAR0)) -#define _reg_DMA_DAR0 (*((P_VU32)MX1_DMA_DAR0)) -#define _reg_DMA_CNTR0 (*((P_VU32)MX1_DMA_CNTR0)) -#define _reg_DMA_CCR0 (*((P_VU32)MX1_DMA_CCR0)) -#define _reg_DMA_RSSR0 (*((P_VU32)MX1_DMA_RSSR0)) -#define _reg_DMA_BLR0 (*((P_VU32)MX1_DMA_BLR0)) -#define _reg_DMA_RTOR0 (*((P_VU32)MX1_DMA_RTOR0)) -#define _reg_DMA_BUCR0 (*((P_VU32)MX1_DMA_BUCR0)) +#define _reg_DMA_DCR (*((P_VU32)MX1_DMA_DCR)) +#define _reg_DMA_DISR (*((P_VU32)MX1_DMA_DISR)) +#define _reg_DMA_DIMR (*((P_VU32)MX1_DMA_DIMR)) +#define _reg_DMA_DBTOSR (*((P_VU32)MX1_DMA_DBTOSR)) +#define _reg_DMA_DRTOSR (*((P_VU32)MX1_DMA_DRTOSR)) +#define _reg_DMA_DSESR (*((P_VU32)MX1_DMA_DSESR)) +#define _reg_DMA_DBOSR (*((P_VU32)MX1_DMA_DBOSR)) +#define _reg_DMA_DBTOCR (*((P_VU32)MX1_DMA_DBTOCR)) +#define _reg_DMA_WSRA (*((P_VU32)MX1_DMA_WSRA)) +#define _reg_DMA_XSRA (*((P_VU32)MX1_DMA_XSRA)) +#define _reg_DMA_YSRA (*((P_VU32)MX1_DMA_YSRA)) +#define _reg_DMA_WSRB (*((P_VU32)MX1_DMA_WSRB)) +#define _reg_DMA_XSRB (*((P_VU32)MX1_DMA_XSRB)) +#define _reg_DMA_YSRB (*((P_VU32)MX1_DMA_YSRB)) +#define _reg_DMA_SAR0 (*((P_VU32)MX1_DMA_SAR0)) +#define _reg_DMA_DAR0 (*((P_VU32)MX1_DMA_DAR0)) +#define _reg_DMA_CNTR0 (*((P_VU32)MX1_DMA_CNTR0)) +#define _reg_DMA_CCR0 (*((P_VU32)MX1_DMA_CCR0)) +#define _reg_DMA_RSSR0 (*((P_VU32)MX1_DMA_RSSR0)) +#define _reg_DMA_BLR0 (*((P_VU32)MX1_DMA_BLR0)) +#define _reg_DMA_RTOR0 (*((P_VU32)MX1_DMA_RTOR0)) +#define _reg_DMA_BUCR0 (*((P_VU32)MX1_DMA_BUCR0)) /* DMA error type definition */ -#define MX1_DMA_ERR_BTO 0 // burst time-out -#define MX1_DMA_ERR_RTO 1 // request time-out -#define MX1_DMA_ERR_TE 2 // transfer error -#define MX1_DMA_ERR_BO 3 // buffer overflow - +#define MX1_DMA_ERR_BTO 0 /* burst time-out */ +#define MX1_DMA_ERR_RTO 1 /* request time-out */ +#define MX1_DMA_ERR_TE 2 /* transfer error */ +#define MX1_DMA_ERR_BO 3 /* buffer overflow */ /* Embedded SRAM */ #define MX1_SRAM_BASE 0x00300000 #define MX1_SRAM_SIZE 0x00020000 -#define - +#define -#define MX1ADS_SFLASH_BASE 0x0C000000 -#define MX1ADS_SFLASH_SIZE SZ_16M +#define MX1ADS_SFLASH_BASE 0x0C000000 +#define MX1ADS_SFLASH_SIZE SZ_16M -#define MX1ADS_IO_BASE 0x00200000 -#define MX1ADS_IO_SIZE SZ_256K +#define MX1ADS_IO_BASE 0x00200000 +#define MX1ADS_IO_SIZE SZ_256K -#define MX1ADS_VID_BASE 0x00300000 -#define MX1ADS_VID_SIZE 0x26000 +#define MX1ADS_VID_BASE 0x00300000 +#define MX1ADS_VID_SIZE 0x26000 -#define MX1ADS_VID_START IO_ADDRESS(MX1ADS_VID_BASE) +#define MX1ADS_VID_START IO_ADDRESS(MX1ADS_VID_BASE) -#define MX1_GPIO_BASE 0x0021C000 // GPIO -#define MX1_EXT_UART_BASE 0x15000000 // external UART -#define MX1_TMR1_BASE 0x00202000 // Timer1 -#define MX1ADS_FLASH_BASE 0x0C000000 // sync FLASH -#define MX1_ESRAM_BASE 0x00300000 // embedded SRAM -#define MX1ADS_SDRAM_DISK_BASE 0x0B000000 // SDRAM disk base (last 16M of SDRAM) +#define MX1_GPIO_BASE 0x0021C000 /* GPIO */ +#define MX1_EXT_UART_BASE 0x15000000 /* external UART */ +#define MX1_TMR1_BASE 0x00202000 /* Timer1 */ +#define MX1ADS_FLASH_BASE 0x0C000000 /* sync FLASH */ +#define MX1_ESRAM_BASE 0x00300000 /* embedded SRAM */ +#define MX1ADS_SDRAM_DISK_BASE 0x0B000000 /* SDRAM disk base (last 16M of SDRAM) */ /* ------------------------------------------------------------------------ * Motorola MX1 system registers @@ -1074,148 +911,141 @@ typedef VU32 * P_VU32; * */ -#define MX1ADS_AIPI1_OFFSET 0x00000 -#define MX1ADS_WDT_OFFSET 0x01000 -#define MX1ADS_TIM1_OFFSET 0x02000 -#define MX1ADS_TIM2_OFFSET 0x03000 -#define MX1ADS_RTC_OFFSET 0x04000 -#define MX1ADS_LCDC_OFFSET 0x05000 -#define MX1ADS_UART1_OFFSET 0x06000 -#define MX1ADS_UART2_OFFSET 0x07000 -#define MX1ADS_PWM_OFFSET 0x08000 -#define MX1ADS_DMAC_OFFSET 0x09000 -#define MX1ADS_AIPI2_OFFSET 0x10000 -#define MX1ADS_SIM_OFFSET 0x11000 -#define MX1ADS_USBD_OFFSET 0x12000 -#define MX1ADS_SPI1_OFFSET 0x13000 -#define MX1ADS_MMC_OFFSET 0x14000 -#define MX1ADS_ASP_OFFSET 0x15000 -#define MX1ADS_BTA_OFFSET 0x16000 -#define MX1ADS_I2C_OFFSET 0x17000 -#define MX1ADS_SSI_OFFSET 0x18000 -#define MX1ADS_SPI2_OFFSET 0x19000 -#define MX1ADS_MSHC_OFFSET 0x1A000 -#define MX1ADS_PLL_OFFSET 0x1B000 -#define MX1ADS_GPIO_OFFSET 0x1C000 -#define MX1ADS_EIM_OFFSET 0x20000 -#define MX1ADS_SDRAMC_OFFSET 0x21000 -#define MX1ADS_MMA_OFFSET 0x22000 -#define MX1ADS_AITC_OFFSET 0x23000 -#define MX1ADS_CSI_OFFSET 0x24000 - +#define MX1ADS_AIPI1_OFFSET 0x00000 +#define MX1ADS_WDT_OFFSET 0x01000 +#define MX1ADS_TIM1_OFFSET 0x02000 +#define MX1ADS_TIM2_OFFSET 0x03000 +#define MX1ADS_RTC_OFFSET 0x04000 +#define MX1ADS_LCDC_OFFSET 0x05000 +#define MX1ADS_UART1_OFFSET 0x06000 +#define MX1ADS_UART2_OFFSET 0x07000 +#define MX1ADS_PWM_OFFSET 0x08000 +#define MX1ADS_DMAC_OFFSET 0x09000 +#define MX1ADS_AIPI2_OFFSET 0x10000 +#define MX1ADS_SIM_OFFSET 0x11000 +#define MX1ADS_USBD_OFFSET 0x12000 +#define MX1ADS_SPI1_OFFSET 0x13000 +#define MX1ADS_MMC_OFFSET 0x14000 +#define MX1ADS_ASP_OFFSET 0x15000 +#define MX1ADS_BTA_OFFSET 0x16000 +#define MX1ADS_I2C_OFFSET 0x17000 +#define MX1ADS_SSI_OFFSET 0x18000 +#define MX1ADS_SPI2_OFFSET 0x19000 +#define MX1ADS_MSHC_OFFSET 0x1A000 +#define MX1ADS_PLL_OFFSET 0x1B000 +#define MX1ADS_GPIO_OFFSET 0x1C000 +#define MX1ADS_EIM_OFFSET 0x20000 +#define MX1ADS_SDRAMC_OFFSET 0x21000 +#define MX1ADS_MMA_OFFSET 0x22000 +#define MX1ADS_AITC_OFFSET 0x23000 +#define MX1ADS_CSI_OFFSET 0x24000 /* * Register BASEs, based on OFFSETs * */ -#define MX1ADS_AIPI1_BASE (MX1ADS_AIPI1_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_WDT_BASE (MX1ADS_WDT_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_TIM1_BASE (MX1ADS_TIM1_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_TIM2_BASE (MX1ADS_TIM2_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_RTC_BASE (MX1ADS_RTC_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_LCDC_BASE (MX1ADS_LCDC_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_UART1_BASE (MX1ADS_UART1_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_UART2_BASE (MX1ADS_UART2_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_PWM_BASE (MX1ADS_PWM_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_DMAC_BASE (MX1ADS_DMAC_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_AIPI2_BASE (MX1ADS_AIPI2_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_SIM_BASE (MX1ADS_SIM_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_USBD_BASE (MX1ADS_USBD_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_SPI1_BASE (MX1ADS_SPI1_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_MMC_BASE (MX1ADS_MMC_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_ASP_BASE (MX1ADS_ASP_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_BTA_BASE (MX1ADS_BTA_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_I2C_BASE (MX1ADS_I2C_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_SSI_BASE (MX1ADS_SSI_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_SPI2_BASE (MX1ADS_SPI2_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_MSHC_BASE (MX1ADS_MSHC_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_PLL_BASE (MX1ADS_PLL_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_GPIO_BASE (MX1ADS_GPIO_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_EIM_BASE (MX1ADS_EIM_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_SDRAMC_BASE (MX1ADS_SDRAMC_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_MMA_BASE (MX1ADS_MMA_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_AITC_BASE (MX1ADS_AITC_OFFSET + MX1ADS_IO_BASE) -#define MX1ADS_CSI_BASE (MX1ADS_CSI_OFFSET + MX1ADS_IO_BASE) - +#define MX1ADS_AIPI1_BASE (MX1ADS_AIPI1_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_WDT_BASE (MX1ADS_WDT_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_TIM1_BASE (MX1ADS_TIM1_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_TIM2_BASE (MX1ADS_TIM2_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_RTC_BASE (MX1ADS_RTC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_LCDC_BASE (MX1ADS_LCDC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_UART1_BASE (MX1ADS_UART1_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_UART2_BASE (MX1ADS_UART2_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_PWM_BASE (MX1ADS_PWM_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_DMAC_BASE (MX1ADS_DMAC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_AIPI2_BASE (MX1ADS_AIPI2_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_SIM_BASE (MX1ADS_SIM_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_USBD_BASE (MX1ADS_USBD_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_SPI1_BASE (MX1ADS_SPI1_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_MMC_BASE (MX1ADS_MMC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_ASP_BASE (MX1ADS_ASP_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_BTA_BASE (MX1ADS_BTA_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_I2C_BASE (MX1ADS_I2C_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_SSI_BASE (MX1ADS_SSI_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_SPI2_BASE (MX1ADS_SPI2_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_MSHC_BASE (MX1ADS_MSHC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_PLL_BASE (MX1ADS_PLL_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_GPIO_BASE (MX1ADS_GPIO_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_EIM_BASE (MX1ADS_EIM_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_SDRAMC_BASE (MX1ADS_SDRAMC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_MMA_BASE (MX1ADS_MMA_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_AITC_BASE (MX1ADS_AITC_OFFSET + MX1ADS_IO_BASE) +#define MX1ADS_CSI_BASE (MX1ADS_CSI_OFFSET + MX1ADS_IO_BASE) /* * MX1 Interrupt numbers * */ -#define INT_SOFTINT 0 -#define CSI_INT 6 -#define DSPA_MAC_INT 7 -#define DSPA_INT 8 -#define COMP_INT 9 -#define MSHC_XINT 10 -#define GPIO_INT_PORTA 11 -#define GPIO_INT_PORTB 12 -#define GPIO_INT_PORTC 13 -#define LCDC_INT 14 -#define SIM_INT 15 -#define SIM_DATA_INT 16 -#define RTC_INT 17 -#define RTC_SAMINT 18 -#define UART2_MINT_PFERR 19 -#define UART2_MINT_RTS 20 -#define UART2_MINT_DTR 21 -#define UART2_MINT_UARTC 22 -#define UART2_MINT_TX 23 -#define UART2_MINT_RX 24 -#define UART1_MINT_PFERR 25 -#define UART1_MINT_RTS 26 -#define UART1_MINT_DTR 27 -#define UART1_MINT_UARTC 28 -#define UART1_MINT_TX 29 -#define UART1_MINT_RX 30 -#define VOICE_DAC_INT 31 -#define VOICE_ADC_INT 32 -#define PEN_DATA_INT 33 -#define PWM_INT 34 -#define SDHC_INT 35 -#define I2C_INT 39 -#define CSPI_INT 41 -#define SSI_TX_INT 42 -#define SSI_TX_ERR_INT 43 -#define SSI_RX_INT 44 -#define SSI_RX_ERR_INT 45 -#define TOUCH_INT 46 -#define USBD_INT0 47 -#define USBD_INT1 48 -#define USBD_INT2 49 -#define USBD_INT3 50 -#define USBD_INT4 51 -#define USBD_INT5 52 -#define USBD_INT6 53 -#define BTSYS_INT 55 -#define BTTIM_INT 56 -#define BTWUI_INT 57 -#define TIMER2_INT 58 -#define TIMER1_INT 59 -#define DMA_ERR 60 -#define DMA_INT 61 -#define GPIO_INT_PORTD 62 - - -#define MAXIRQNUM 62 -#define MAXFIQNUM 62 -#define MAXSWINUM 62 - - -#define TICKS_PER_uSEC 24 +#define INT_SOFTINT 0 +#define CSI_INT 6 +#define DSPA_MAC_INT 7 +#define DSPA_INT 8 +#define COMP_INT 9 +#define MSHC_XINT 10 +#define GPIO_INT_PORTA 11 +#define GPIO_INT_PORTB 12 +#define GPIO_INT_PORTC 13 +#define LCDC_INT 14 +#define SIM_INT 15 +#define SIM_DATA_INT 16 +#define RTC_INT 17 +#define RTC_SAMINT 18 +#define UART2_MINT_PFERR 19 +#define UART2_MINT_RTS 20 +#define UART2_MINT_DTR 21 +#define UART2_MINT_UARTC 22 +#define UART2_MINT_TX 23 +#define UART2_MINT_RX 24 +#define UART1_MINT_PFERR 25 +#define UART1_MINT_RTS 26 +#define UART1_MINT_DTR 27 +#define UART1_MINT_UARTC 28 +#define UART1_MINT_TX 29 +#define UART1_MINT_RX 30 +#define VOICE_DAC_INT 31 +#define VOICE_ADC_INT 32 +#define PEN_DATA_INT 33 +#define PWM_INT 34 +#define SDHC_INT 35 +#define I2C_INT 39 +#define CSPI_INT 41 +#define SSI_TX_INT 42 +#define SSI_TX_ERR_INT 43 +#define SSI_RX_INT 44 +#define SSI_RX_ERR_INT 45 +#define TOUCH_INT 46 +#define USBD_INT0 47 +#define USBD_INT1 48 +#define USBD_INT2 49 +#define USBD_INT3 50 +#define USBD_INT4 51 +#define USBD_INT5 52 +#define USBD_INT6 53 +#define BTSYS_INT 55 +#define BTTIM_INT 56 +#define BTWUI_INT 57 +#define TIMER2_INT 58 +#define TIMER1_INT 59 +#define DMA_ERR 60 +#define DMA_INT 61 +#define GPIO_INT_PORTD 62 + +#define MAXIRQNUM 62 +#define MAXFIQNUM 62 +#define MAXSWINUM 62 + +#define TICKS_PER_uSEC 24 /* * These are useconds NOT ticks. * */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - - -#endif - +#define mSEC_1 1000 +#define mSEC_5 (mSEC_1 * 5) +#define mSEC_10 (mSEC_1 * 10) +#define mSEC_25 (mSEC_1 * 25) +#define SEC_1 (mSEC_1 * 1000) +#endif -- 2.25.1