From 482cf22333dbfb7c706d6a7ec1ffbfa5409cc6a3 Mon Sep 17 00:00:00 2001 From: Philipp Tomsich Date: Fri, 29 Sep 2017 19:28:01 +0200 Subject: [PATCH] rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE The (Qseven) BIOS_DISABLE signal on the RK3399-Q7 (Puma) keeps the eMMC and SPI in reset initially and we need to write a GPIO to turn them on before continuing the boot-up. This adds the DTS entries for the additional regulator and makes pinctrl and gpio3 available during SPL. It also adds a hook to the spl_board_init() to ensure that the regulator gets probed and enabled. Signed-off-by: Philipp Tomsich Reviewed-by: Simon Glass --- arch/arm/dts/rk3399-puma.dtsi | 30 ++++++++++++++++--- .../puma_rk3399/puma-rk3399.c | 10 +++++++ 2 files changed, 36 insertions(+), 4 deletions(-) diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index f95c68e9f6..65ab380139 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -101,6 +101,24 @@ regulator-max-microvolt = <3300000>; }; + /* + * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module + * eMMC and SPI flash powered-down initially (in fact it keeps the + * reset signal asserted). Even though it is an enable signal, we + * model this as a regulator. + */ + bios_enable: bios_enable { + compatible = "regulator-fixed"; + u-boot,dm-pre-reloc; + regulator-name = "bios_enable"; + enable-active-low; + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vccadc_ref: vccadc-ref { compatible = "regulator-fixed"; regulator-name = "vcc1v8_sys"; @@ -459,7 +477,7 @@ }; &pcie_phy { - status = "okay"; + status = "okay"; }; &pmu_io_domains { @@ -486,7 +504,7 @@ }; &sdmmc { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; clock-frequency = <150000000>; clock-freq-min-max = <100000 150000000>; supports-sd; @@ -533,10 +551,15 @@ status = "okay"; }; +&gpio3 { + u-boot,dm-pre-reloc; +}; + &pinctrl { /* Pins that are not explicitely used by any devices */ pinctrl-names = "default"; pinctrl-0 = <&puma_pin_hog>; + hog { puma_pin_hog: puma_pin_hog { rockchip,pins = @@ -576,7 +599,7 @@ i2c8 { i2c8_xfer_a: i2c8-xfer { rockchip,pins = <1 21 RK_FUNC_1 &pcfg_pull_up>, - <1 20 RK_FUNC_1 &pcfg_pull_up>; + <1 20 RK_FUNC_1 &pcfg_pull_up>; }; }; }; @@ -652,4 +675,3 @@ &spi5 { status = "okay"; }; - diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c index 3cab7b1d48..2b4988e2d2 100644 --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c @@ -34,6 +34,16 @@ int board_init(void) void spl_board_init(void) { + int ret; + + /* + * Turning the eMMC and SPI back on (if disabled via the Qseven + * BIOS_ENABLE) signal is done through a always-on regulator). + */ + ret = regulators_enable_boot_on(false); + if (ret) + debug("%s: Cannot enable boot on regulator\n", __func__); + preloader_console_init(); } -- 2.25.1