From 4654af27b894277c9e3dac5359f6b3e74d1405ac Mon Sep 17 00:00:00 2001 From: wdenk Date: Wed, 22 Oct 2003 09:00:28 +0000 Subject: [PATCH] Fix PCI problems on PPChameleon board --- CHANGELOG | 2 ++ board/dave/PPChameleonEVB/PPChameleonEVB.c | 2 +- cpu/ppc4xx/405gp_pci.c | 5 ++++- doc/README.mpc85xxads | 4 ++++ drivers/ns8382x.c | 2 +- drivers/pci.c | 2 -- include/configs/PPChameleonEVB.h | 2 +- include/configs/trab.h | 2 +- 8 files changed, 14 insertions(+), 7 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 13ce748ae8..abd42a0b0f 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes for U-Boot 1.0.0: ====================================================================== +* Fix PCI problems on PPChameleon board + * Patch by Steven Scholz, 18 Oct 2003: Fix AT91RM9200 ethernet driver diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c index 803c798228..a7682ba338 100644 --- a/board/dave/PPChameleonEVB/PPChameleonEVB.c +++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c @@ -68,7 +68,7 @@ int board_pre_init (void) mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ mtdcr(uicer, 0x00000000); /* disable all ints */ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ + mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ mtdcr(uictr, 0x10000000); /* set int trigger levels */ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index fa5acfc0de..d3f6b23794 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -206,11 +206,14 @@ void pci_405gp_init(struct pci_controller *hose) *--------------------------------------------------------------------------*/ out32r(PTM1LA, ptmla[0]); /* insert address */ out32r(PTM1MS, ptmms[0]); /* insert size, enable bit is 1 */ + pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_1, ptmpcila[0]); /*--------------------------------------------------------------------------+ * 405GP PCI Target configuration. (PTM2) *--------------------------------------------------------------------------*/ out32r(PTM2LA, ptmla[1]); /* insert address */ + pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, ptmpcila[1]); + if (ptmms[1] == 0) { out32r(PTM2MS, 0x00000001); /* set enable bit */ @@ -251,7 +254,7 @@ void pci_405gp_init(struct pci_controller *hose) } #if (CONFIG_PCI_HOST != PCI_HOST_ADAPTER) -#if (CONFIG_PCI_HOSE == PCI_HOST_AUTO) +#if (CONFIG_PCI_HOST == PCI_HOST_AUTO) if (mfdcr(strap) & PSR_PCI_ARBIT_EN) #endif { diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads index 3eb5d95744..f78c9c6b39 100644 --- a/doc/README.mpc85xxads +++ b/doc/README.mpc85xxads @@ -4,6 +4,10 @@ Xianghua Xiao(X.Xiao@motorola.com) Created 10/15/03 ----------------------------------------- +0. Toolchain +The Binutils in current ELDK toolchain will not support MPC85xx chip. You need +use the newest binutils-2.14.tar.bz2 from http://ftp.gnu.org/gnu/binutils. + 1. SWITCH SETTINGS & JUMPERS 1.1 First, make sure the board default setting is consistent with the document shipped with your board. Then apply the following changes: diff --git a/drivers/ns8382x.c b/drivers/ns8382x.c index 978080eb20..154d6cacef 100644 --- a/drivers/ns8382x.c +++ b/drivers/ns8382x.c @@ -321,7 +321,7 @@ ns8382x_initialize(bd_t * bis) if ((devno = pci_find_devices(supported, idx++)) < 0) break; - pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase); + pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); iobase &= ~0x3; /* 1: unused and 0:I/O Space Indicator */ #ifdef NS8382X_DEBUG diff --git a/drivers/pci.c b/drivers/pci.c index c91c992e8d..e014f91444 100644 --- a/drivers/pci.c +++ b/drivers/pci.c @@ -428,11 +428,9 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus) dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); dev += PCI_BDF(0,0,1)) { -#if ((!defined(CONFIG_405GP)) && (!defined(CONFIG_405EP))) /* don't skip host bridge on ppc405gp and 405ep */ /* Skip our host bridge */ if ( dev == PCI_BDF(hose->first_busno,0,0) ) continue; -#endif if (PCI_FUNC(dev) && !found_multi) continue; diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 52c65e920c..b480114373 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -282,7 +282,7 @@ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #undef CONFIG_PCI_PNP /* do pci plug-and-play */ /* resource configuration */ diff --git a/include/configs/trab.h b/include/configs/trab.h index caf1bbd0dc..e7d1b263e6 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -204,7 +204,7 @@ "loadaddr=c400000\0" \ "net_load=tftpboot $loadaddr $loadfile\0" \ "net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \ - "kernel_addr=000C0000\0" \ + "kernel_addr=00060000\0" \ "flash_nfs=run nfs_args add_net add_misc;bootm $kernel_addr\0" \ "mdm_init1=ATZ\0" \ "mdm_init2=ATS0=1\0" \ -- 2.25.1