From 45d85f0872ef92779ea5b51a424845a919a41462 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 29 Jul 2016 13:15:05 -0600 Subject: [PATCH] ARM: tegra: enable SD card on p2771-0000 Now that clock and reset drivers exist for Tegra186, we can enable the SD card controller. Now that a BPMP I2C driver exists for Tegra186, we can communicate with the PMIC to enable power to the SD card. Hook up the DT content and board code required to make the SD card work. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- arch/arm/dts/tegra186-p2771-0000-a02.dts | 5 +++++ arch/arm/dts/tegra186-p2771-0000-b00.dts | 5 +++++ arch/arm/dts/tegra186-p2771-0000.dtsi | 14 +++++++++++++ board/nvidia/p2771-0000/p2771-0000.c | 26 ++++++++++++++++++++++++ configs/p2771-0000-a02_defconfig | 1 + configs/p2771-0000-b00_defconfig | 1 + 6 files changed, 52 insertions(+) diff --git a/arch/arm/dts/tegra186-p2771-0000-a02.dts b/arch/arm/dts/tegra186-p2771-0000-a02.dts index 70f4326c09..5ed3817a41 100644 --- a/arch/arm/dts/tegra186-p2771-0000-a02.dts +++ b/arch/arm/dts/tegra186-p2771-0000-a02.dts @@ -5,4 +5,9 @@ / { model = "NVIDIA P2771-0000 A02"; compatible = "nvidia,p2771-0000-a02", "nvidia,p2771-0000", "nvidia,tegra186"; + + sdhci@3400000 { + cd-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_HIGH>; + }; }; diff --git a/arch/arm/dts/tegra186-p2771-0000-b00.dts b/arch/arm/dts/tegra186-p2771-0000-b00.dts index 2384a65e87..90c99c33cc 100644 --- a/arch/arm/dts/tegra186-p2771-0000-b00.dts +++ b/arch/arm/dts/tegra186-p2771-0000-b00.dts @@ -5,4 +5,9 @@ / { model = "NVIDIA P2771-0000 B00"; compatible = "nvidia,p2771-0000-b00", "nvidia,p2771-0000", "nvidia,tegra186"; + + sdhci@3400000 { + cd-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>; + }; }; diff --git a/arch/arm/dts/tegra186-p2771-0000.dtsi b/arch/arm/dts/tegra186-p2771-0000.dtsi index 4e2b6fbf97..d867674fd0 100644 --- a/arch/arm/dts/tegra186-p2771-0000.dtsi +++ b/arch/arm/dts/tegra186-p2771-0000.dtsi @@ -10,6 +10,8 @@ aliases { sdhci0 = "/sdhci@3460000"; + sdhci1 = "/sdhci@3400000"; + i2c0 = "/bpmp/i2c"; i2c1 = "/i2c@3160000"; i2c2 = "/i2c@c240000"; i2c3 = "/i2c@3180000"; @@ -39,6 +41,12 @@ status = "okay"; }; + sdhci@3400000 { + status = "okay"; + wp-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + }; + sdhci@3460000 { status = "okay"; bus-width = <8>; @@ -55,4 +63,10 @@ i2c@31e0000 { status = "okay"; }; + + bpmp { + i2c { + status = "okay"; + }; + }; }; diff --git a/board/nvidia/p2771-0000/p2771-0000.c b/board/nvidia/p2771-0000/p2771-0000.c index 4ba8ebc0dc..0c828a2005 100644 --- a/board/nvidia/p2771-0000/p2771-0000.c +++ b/board/nvidia/p2771-0000/p2771-0000.c @@ -5,3 +5,29 @@ */ #include +#include +#include "../p2571/max77620_init.h" + +int tegra_board_init(void) +{ + struct udevice *dev; + uchar val; + int ret; + + /* Turn on MAX77620 LDO3 to 3.3V for SD card power */ + debug("%s: Set LDO3 for VDDIO_SDMMC_AP power to 3.3V\n", __func__); + ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev); + if (ret) { + printf("%s: Cannot find MAX77620 I2C chip\n", __func__); + return ret; + } + /* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */ + val = 0xF2; + ret = dm_i2c_write(dev, MAX77620_CNFG1_L3_REG, &val, 1); + if (ret) { + printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret); + return ret; + } + + return 0; +} diff --git a/configs/p2771-0000-a02_defconfig b/configs/p2771-0000-a02_defconfig index 1fe25f58f1..404f7acf7e 100644 --- a/configs/p2771-0000-a02_defconfig +++ b/configs/p2771-0000-a02_defconfig @@ -26,6 +26,7 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_TEGRA186_BPMP_I2C=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/p2771-0000-b00_defconfig b/configs/p2771-0000-b00_defconfig index 552fb6cec7..ad35c99bbb 100644 --- a/configs/p2771-0000-b00_defconfig +++ b/configs/p2771-0000-b00_defconfig @@ -26,6 +26,7 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_TEGRA186_BPMP_I2C=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y -- 2.25.1