From 447ec175b253ac7d945c14f35b0eab4ddd46f5a5 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 13 Jun 2020 13:20:09 +0530 Subject: [PATCH] powerpc: Remove configs/C29XPCIE_NAND_defconfig board DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Po Liu Signed-off-by: Jagan Teki Reviewed-by: Priyanka Jain --- arch/powerpc/cpu/mpc85xx/Kconfig | 10 - board/freescale/c29xpcie/Kconfig | 14 - board/freescale/c29xpcie/MAINTAINERS | 10 - board/freescale/c29xpcie/Makefile | 25 -- board/freescale/c29xpcie/README | 99 ----- board/freescale/c29xpcie/c29xpcie.c | 159 ------- board/freescale/c29xpcie/cpld.c | 133 ------ board/freescale/c29xpcie/cpld.h | 39 -- board/freescale/c29xpcie/ddr.c | 106 ----- board/freescale/c29xpcie/law.c | 18 - board/freescale/c29xpcie/spl.c | 81 ---- board/freescale/c29xpcie/spl_minimal.c | 63 --- board/freescale/c29xpcie/tlb.c | 84 ---- configs/C29XPCIE_NAND_defconfig | 70 ---- configs/C29XPCIE_NOR_SECBOOT_defconfig | 55 --- configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig | 57 --- configs/C29XPCIE_SPIFLASH_defconfig | 55 --- configs/C29XPCIE_defconfig | 53 --- include/configs/C29XPCIE.h | 443 -------------------- 19 files changed, 1574 deletions(-) delete mode 100644 board/freescale/c29xpcie/Kconfig delete mode 100644 board/freescale/c29xpcie/MAINTAINERS delete mode 100644 board/freescale/c29xpcie/Makefile delete mode 100644 board/freescale/c29xpcie/README delete mode 100644 board/freescale/c29xpcie/c29xpcie.c delete mode 100644 board/freescale/c29xpcie/cpld.c delete mode 100644 board/freescale/c29xpcie/cpld.h delete mode 100644 board/freescale/c29xpcie/ddr.c delete mode 100644 board/freescale/c29xpcie/law.c delete mode 100644 board/freescale/c29xpcie/spl.c delete mode 100644 board/freescale/c29xpcie/spl_minimal.c delete mode 100644 board/freescale/c29xpcie/tlb.c delete mode 100644 configs/C29XPCIE_NAND_defconfig delete mode 100644 configs/C29XPCIE_NOR_SECBOOT_defconfig delete mode 100644 configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig delete mode 100644 configs/C29XPCIE_SPIFLASH_defconfig delete mode 100644 configs/C29XPCIE_defconfig delete mode 100644 include/configs/C29XPCIE.h diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 7a157da763..a78ba2ce3d 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -24,15 +24,6 @@ config TARGET_SOCRATES bool "Support socrates" select ARCH_MPC8544 -config TARGET_C29XPCIE - bool "Support C29XPCIE" - select ARCH_C29X - select BOARD_LATE_INIT if CHAIN_OF_TRUST - select SUPPORT_SPL - select SUPPORT_TPL - select PHYS_64BIT - imply PANIC_HANG - config TARGET_P3041DS bool "Support P3041DS" select PHYS_64BIT @@ -1565,7 +1556,6 @@ config SYS_FSL_LBC_CLK_DIV Defines divider of platform clock(clock input to eLBC controller). -source "board/freescale/c29xpcie/Kconfig" source "board/freescale/corenet_ds/Kconfig" source "board/freescale/mpc8536ds/Kconfig" source "board/freescale/mpc8541cds/Kconfig" diff --git a/board/freescale/c29xpcie/Kconfig b/board/freescale/c29xpcie/Kconfig deleted file mode 100644 index 51e25c39df..0000000000 --- a/board/freescale/c29xpcie/Kconfig +++ /dev/null @@ -1,14 +0,0 @@ -if TARGET_C29XPCIE - -config SYS_BOARD - default "c29xpcie" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "C29XPCIE" - -source "board/freescale/common/Kconfig" - -endif diff --git a/board/freescale/c29xpcie/MAINTAINERS b/board/freescale/c29xpcie/MAINTAINERS deleted file mode 100644 index 44af12cdbe..0000000000 --- a/board/freescale/c29xpcie/MAINTAINERS +++ /dev/null @@ -1,10 +0,0 @@ -C29XPCIE BOARD -M: Po Liu -S: Maintained -F: board/freescale/c29xpcie/ -F: include/configs/C29XPCIE.h -F: configs/C29XPCIE_defconfig -F: configs/C29XPCIE_NAND_defconfig -F: configs/C29XPCIE_SPIFLASH_defconfig -F: configs/C29XPCIE_NOR_SECBOOT_defconfig -F: configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig diff --git a/board/freescale/c29xpcie/Makefile b/board/freescale/c29xpcie/Makefile deleted file mode 100644 index 2a9c1be802..0000000000 --- a/board/freescale/c29xpcie/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2013 Freescale Semiconductor, Inc. -# - -MINIMAL= -ifdef CONFIG_SPL_BUILD -ifdef CONFIG_SPL_INIT_MINIMAL -MINIMAL=y -endif -endif - -ifdef MINIMAL -obj-y += spl_minimal.o -else -ifdef CONFIG_SPL_BUILD -obj-y += spl.o -endif -obj-y += c29xpcie.o -obj-y += cpld.o -obj-y += ddr.o -endif - -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README deleted file mode 100644 index a6120f1845..0000000000 --- a/board/freescale/c29xpcie/README +++ /dev/null @@ -1,99 +0,0 @@ -Overview -========= -C29XPCIE board is a series of Freescale PCIe add-in cards to perform -as public key crypto accelerator or secure key management module. -It includes C293PCIE board, C293PCIE board and C291PCIE board. -The Freescale C29x family is a high performance crypto co-processor. -It combines a single e500v2 core with necessary SEC engines. -(maximum core frequency 1000/1200 MHz). - -The C29xPCIE board features are as follows: -Memory subsystem: - - 512Mbyte unbuffered DDR3 SDRAM discrete devices (32-bit bus) - - 64 Mbyte NOR flash single-chip memory - - 4 Gbyte NAND flash memory - - 1 Mbit AT24C1024 I2C EEPROM - - 16 Mbyte SPI memory - -Interfaces: - - 10/100/1000 BaseT Ethernet ports: - - eTSEC1, RGMII: one 10/100/1000 port - - eTSEC2, RGMII: one 10/100/1000 port - - DUART interface: - - DUART interface: supports two UARTs up to 115200 bps for - console display - -Board connectors: - - Mini-ITX power supply connector - - JTAG/COP for debugging - -Physical Memory Map on C29xPCIE -=============================== -Address Start Address End Memory type -0x0_0000_0000 - 0x0_1fff_ffff 512MB DDR -0xc_0000_0000 - 0xc_8fff_ffff 256MB PCIE memory -0xf_ec00_0000 - 0xf_efff_ffff 64MB NOR flash -0xf_ffb0_0000 - 0xf_ffb7_ffff 512KB SRAM -0xf_ffc0_0000 - 0xf_ffc0_ffff 64KB PCIE IO -0xf_ffdf_0000 - 0xf_ffdf_0fff 4KB CPLD -0xf_ffe0_0000 - 0xf_ffef_ffff 1MB CCSR - -Serial Port Configuration on C29xPCIE -===================================== -Configure the serial port of the attached computer with the following values: - -Data rate: 115200 bps - -Number of data bits: 8 - -Parity: None - -Number of Stop bits: 1 - -Flow Control: Hardware/None - -Settings of DIP-switch -====================== - SW5[1:4]= 1111 and SW5[6]=0 for boot from 16bit NOR flash - SW5[1:4]= 0110 and SW5[6]=0 for boot from SPI flash -Note: 1 stands for 'off', 0 stands for 'on' - -Build and program U-Boot to NOR flash -================================== -1. Build u-boot.bin image example: - export CROSS_COMPILE=/your_path/powerpc-linux-gnu- - make C293PCIE - -2. Program u-boot.bin into NOR flash - => tftp $loadaddr $uboot - => protect off eff40000 +$filesize - => erase eff40000 +$filesize - => cp.b $loadaddr eff40000 $filesize - -3. Check SW5[1:4]= 1111 and SW5[6]=0, then power on. - -Alternate NOR bank -================== -There are four banks in C29XPCIE board, example to change bank booting: -1. Program u-boot.bin into alternate NOR bank - => tftp $loadaddr $uboot - => protect off e9f40000 +$filesize - => erase e9f40000 +$filesize - => cp.b $loadaddr e9f40000 $filesize - -2. Switch to alternate NOR bank - => cpld_cmd reset altbank [bank] - - [bank] bank value select 1-4 - - bank 1 on the flash 0x0000000~0x0ffffff - - bank 2 on the flash 0x1000000~0x1ffffff - - bank 3 on the flash 0x2000000~0x2ffffff - - bank 4 on the flash 0x3000000~0x3ffffff - or set SW5[7]= ON/OFF and SW5[7]= ON/OFF, then power on again. - -Build and program U-Boot to SPI flash -================================== -1. Build u-boot-spi.bin image - make C29xPCIE_SPIFLASH_config; make - Need the boot_format tool to generate u-boot-spi.bin from the u-boot.bin. - -2. Program u-boot-spi.bin into SPI flash - => tftp $loadaddr $uboot-spi - => sf erase 0 100000 - => sf write $loadaddr 0 $filesize - -3. Check SW5[1:4]= 0110 and SW5[6]=0, then power on. diff --git a/board/freescale/c29xpcie/c29xpcie.c b/board/freescale/c29xpcie/c29xpcie.c deleted file mode 100644 index 74502c6d18..0000000000 --- a/board/freescale/c29xpcie/c29xpcie.c +++ /dev/null @@ -1,159 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "cpld.h" - -DECLARE_GLOBAL_DATA_PTR; - -int checkboard(void) -{ - struct cpu_type *cpu = gd->arch.cpu; - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); - - printf("Board: %sPCIe, ", cpu->name); - printf("CPLD Ver: 0x%02x\n", in_8(&cpld_data->cpldver)); - - return 0; -} - -int board_early_init_f(void) -{ - struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL}; - - /* Clock configuration to access CPLD using IFC(GPCM) */ - setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); - - return 0; -} - -int board_early_init_r(void) -{ - const unsigned long flashbase = CONFIG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap Boot flash region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 1; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_64M, 1); - - return 0; -} - -#ifdef CONFIG_PCI -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} -#endif /* ifdef CONFIG_PCI */ - -int board_eth_init(bd_t *bis) -{ -#ifdef CONFIG_TSEC_ENET - struct fsl_pq_mdio_info mdio_info; - struct tsec_info_struct tsec_info[2]; - int num = 0; - -#ifdef CONFIG_TSEC1 - SET_STD_TSEC_INFO(tsec_info[num], 1); - num++; -#endif -#ifdef CONFIG_TSEC2 - SET_STD_TSEC_INFO(tsec_info[num], 2); - num++; -#endif - if (!num) { - printf("No TSECs initialized\n"); - return 0; - } - - /* Register 1G MDIO bus */ - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - - fsl_pq_mdio_init(bis, &mdio_info); - - tsec_eth_init(bis, tsec_info, num); -#endif - - return pci_eth_init(bis); -} - -#if defined(CONFIG_OF_BOARD_SETUP) -void fdt_del_sec(void *blob, int offset) -{ - int nodeoff = 0; - - while ((nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,sec-v6.0", - CONFIG_SYS_CCSRBAR_PHYS + CONFIG_SYS_FSL_SEC_OFFSET - + offset * CONFIG_SYS_FSL_SEC_IDX_OFFSET)) >= 0) { - fdt_del_node(blob, nodeoff); - offset++; - } -} - -int ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - struct cpu_type *cpu; - - cpu = gd->arch.cpu; - - ft_cpu_setup(blob, bd); - - base = env_get_bootm_low(); - size = env_get_bootm_size(); - -#if defined(CONFIG_PCI) - FT_FSL_PCI_SETUP; -#endif - - fdt_fixup_memory(blob, (u64)base, (u64)size); - if (cpu->soc_ver == SVR_C291) - fdt_del_sec(blob, 1); - else if (cpu->soc_ver == SVR_C292) - fdt_del_sec(blob, 2); - - return 0; -} -#endif diff --git a/board/freescale/c29xpcie/cpld.c b/board/freescale/c29xpcie/cpld.c deleted file mode 100644 index 826af428ce..0000000000 --- a/board/freescale/c29xpcie/cpld.c +++ /dev/null @@ -1,133 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/** - * Copyright 2013 Freescale Semiconductor - * Author: Mingkai Hu - * Po Liu - * - * This file provides support for the board-specific CPLD used on some Freescale - * reference boards. - * - * The following macros need to be defined: - * - * CONFIG_SYS_CPLD_BASE - The virtual address of the base of the - * CPLD register map - * - */ - -#include -#include -#include -#include - -#include "cpld.h" -/** - * Set the boot bank to the alternate bank - */ -void cpld_set_altbank(u8 banksel) -{ - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); - u8 reg11; - - reg11 = in_8(&cpld_data->flhcsr); - - switch (banksel) { - case 1: - out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) - | CPLD_BANKSEL_EN | CPLD_SELECT_BANK1); - break; - case 2: - out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) - | CPLD_BANKSEL_EN | CPLD_SELECT_BANK2); - break; - case 3: - out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) - | CPLD_BANKSEL_EN | CPLD_SELECT_BANK3); - break; - case 4: - out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) - | CPLD_BANKSEL_EN | CPLD_SELECT_BANK4); - break; - default: - printf("Invalid value! [1-4]\n"); - return; - } - - udelay(100); - do_reset(NULL, 0, 0, NULL); -} - -/** - * Set the boot bank to the default bank - */ -void cpld_set_defbank(void) -{ - cpld_set_altbank(4); -} - -#ifdef DEBUG -static void cpld_dump_regs(void) -{ - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); - - printf("chipid1 = 0x%02x\n", in_8(&cpld_data->chipid1)); - printf("chipid2 = 0x%02x\n", in_8(&cpld_data->chipid2)); - printf("hwver = 0x%02x\n", in_8(&cpld_data->hwver)); - printf("cpldver = 0x%02x\n", in_8(&cpld_data->cpldver)); - printf("rstcon = 0x%02x\n", in_8(&cpld_data->rstcon)); - printf("flhcsr = 0x%02x\n", in_8(&cpld_data->flhcsr)); - printf("wdcsr = 0x%02x\n", in_8(&cpld_data->wdcsr)); - printf("wdkick = 0x%02x\n", in_8(&cpld_data->wdkick)); - printf("fancsr = 0x%02x\n", in_8(&cpld_data->fancsr)); - printf("ledcsr = 0x%02x\n", in_8(&cpld_data->ledcsr)); - printf("misc = 0x%02x\n", in_8(&cpld_data->misccsr)); - printf("bootor = 0x%02x\n", in_8(&cpld_data->bootor)); - printf("bootcfg1 = 0x%02x\n", in_8(&cpld_data->bootcfg1)); - printf("bootcfg2 = 0x%02x\n", in_8(&cpld_data->bootcfg2)); - printf("bootcfg3 = 0x%02x\n", in_8(&cpld_data->bootcfg3)); - printf("bootcfg4 = 0x%02x\n", in_8(&cpld_data->bootcfg4)); - putc('\n'); -} -#endif - -#ifndef CONFIG_SPL_BUILD -int cpld_cmd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - int rc = 0; - unsigned char value; - - if (argc <= 1) - return cmd_usage(cmdtp); - - if (strcmp(argv[1], "reset") == 0) { - if (!strcmp(argv[2], "altbank") && argv[3]) { - value = (u8)simple_strtoul(argv[3], NULL, 16); - cpld_set_altbank(value); - } else if (!argv[2]) - cpld_set_defbank(); - else - cmd_usage(cmdtp); -#ifdef DEBUG - } else if (strcmp(argv[1], "dump") == 0) { - cpld_dump_regs(); -#endif - } else - rc = cmd_usage(cmdtp); - - return rc; -} - -U_BOOT_CMD( - cpld_cmd, CONFIG_SYS_MAXARGS, 1, cpld_cmd, - "Reset the board using the CPLD sequencer", - "reset - hard reset to default bank 4\n" - "cpld_cmd reset altbank [bank]- reset to alternate bank\n" - " - [bank] bank value select 1-4\n" - " - bank 1 on the flash 0x0000000~0x0ffffff\n" - " - bank 2 on the flash 0x1000000~0x1ffffff\n" - " - bank 3 on the flash 0x2000000~0x2ffffff\n" - " - bank 4 on the flash 0x3000000~0x3ffffff\n" -#ifdef DEBUG - "cpld_cmd dump - display the CPLD registers\n" -#endif - ); -#endif diff --git a/board/freescale/c29xpcie/cpld.h b/board/freescale/c29xpcie/cpld.h deleted file mode 100644 index 02e9160854..0000000000 --- a/board/freescale/c29xpcie/cpld.h +++ /dev/null @@ -1,39 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/** - * Copyright 2013 Freescale Semiconductor - * Author: Mingkai Hu - * Po Liu - * - * This file provides support for the ngPIXIS, a board-specific FPGA used on - * some Freescale reference boards. - */ - -/* - * CPLD register set. Feel free to add board-specific #ifdefs where necessary. - */ -struct cpld_data { - u8 chipid1; /* 0x0 - CPLD Chip ID1 Register */ - u8 chipid2; /* 0x1 - CPLD Chip ID2 Register */ - u8 hwver; /* 0x2 - Hardware Version Register */ - u8 cpldver; /* 0x3 - Software Version Register */ - u8 res[12]; - u8 rstcon; /* 0x10 - Reset control register */ - u8 flhcsr; /* 0x11 - Flash control and status Register */ - u8 wdcsr; /* 0x12 - Watchdog control and status Register */ - u8 wdkick; /* 0x13 - Watchdog kick Register */ - u8 fancsr; /* 0x14 - Fan control and status Register */ - u8 ledcsr; /* 0x15 - LED control and status Register */ - u8 misccsr; /* 0x16 - Misc control and status Register */ - u8 bootor; /* 0x17 - Boot configure override Register */ - u8 bootcfg1; /* 0x18 - Boot configure 1 Register */ - u8 bootcfg2; /* 0x19 - Boot configure 2 Register */ - u8 bootcfg3; /* 0x1a - Boot configure 3 Register */ - u8 bootcfg4; /* 0x1b - Boot configure 4 Register */ -}; - -#define CPLD_BANKSEL_EN 0x02 -#define CPLD_BANKSEL_MASK 0x3f -#define CPLD_SELECT_BANK1 0xc0 -#define CPLD_SELECT_BANK2 0x80 -#define CPLD_SELECT_BANK3 0x40 -#define CPLD_SELECT_BANK4 0x00 diff --git a/board/freescale/c29xpcie/ddr.c b/board/freescale/c29xpcie/ddr.c deleted file mode 100644 index 5795a27f65..0000000000 --- a/board/freescale/c29xpcie/ddr.c +++ /dev/null @@ -1,106 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include - -#include "cpld.h" - -#define C29XPCIE_HARDWARE_REVA 0x40 -/* - * Micron MT41J128M16HA-15E - * */ -dimm_params_t ddr_raw_timing = { - .n_ranks = 1, - .rank_density = 536870912u, - .capacity = 536870912u, - .primary_sdram_width = 32, - .ec_sdram_width = 8, - .registered_dimm = 0, - .mirrored_dimm = 0, - .n_row_addr = 14, - .n_col_addr = 10, - .n_banks_per_sdram_device = 8, - .edc_config = 2, - .burst_lengths_bitmask = 0x0c, - - .tckmin_x_ps = 1650, - .caslat_x = 0x7e << 4, /* 5,6,7,8,9,10 */ - .taa_ps = 14050, - .twr_ps = 15000, - .trcd_ps = 13500, - .trrd_ps = 75000, - .trp_ps = 13500, - .tras_ps = 40000, - .trc_ps = 49500, - .trfc_ps = 160000, - .twtr_ps = 75000, - .trtp_ps = 75000, - .refresh_rate_ps = 7800000, - .tfaw_ps = 30000, -}; - -int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, - unsigned int controller_number, - unsigned int dimm_number) -{ - const char dimm_model[] = "Fixed DDR on board"; - - if ((controller_number == 0) && (dimm_number == 0)) { - memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t)); - memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); - memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1); - } - - return 0; -} - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); - int i; - - popts->clk_adjust = 4; - popts->cpo_override = 0x1f; - popts->write_data_delay = 4; - popts->half_strength_driver_enable = 1; - popts->bstopre = 0x3cf; - popts->quad_rank_present = 1; - popts->rtt_override = 1; - popts->rtt_override_value = 1; - popts->dynamic_power = 1; - /* Write leveling override */ - popts->wrlvl_en = 1; - popts->wrlvl_override = 1; - popts->wrlvl_sample = 0xf; - popts->wrlvl_start = 0x4; - popts->trwt_override = 1; - popts->trwt = 0; - - if (in_8(&cpld_data->hwver) == C29XPCIE_HARDWARE_REVA) - popts->ecc_mode = 0; - - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER; - popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS; - } -} - -void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) -{ - int ret = i2c_read(i2c_address, 0, 2, (uint8_t *)spd, - sizeof(generic_spd_eeprom_t)); - - if (ret) { - printf("DDR: failed to read SPD from address %u\n", - i2c_address); - memset(spd, 0, sizeof(generic_spd_eeprom_t)); - } -} diff --git a/board/freescale/c29xpcie/law.c b/board/freescale/c29xpcie/law.c deleted file mode 100644 index 6d441d87a7..0000000000 --- a/board/freescale/c29xpcie/law.c +++ /dev/null @@ -1,18 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include -#include -#include - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_IFC), - SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), - SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), - SET_LAW(CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS, LAW_SIZE_512K, - LAW_TRGT_IF_PLATFORM_SRAM), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/c29xpcie/spl.c b/board/freescale/c29xpcie/spl.c deleted file mode 100644 index 421c2d4b1f..0000000000 --- a/board/freescale/c29xpcie/spl.c +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -phys_size_t get_effective_memsize(void) -{ - return CONFIG_SYS_L2_SIZE; -} - -void board_init_f(ulong bootflag) -{ - u32 plat_ratio; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - console_init_f(); - - /* initialize selected port with appropriate baud rate */ - plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; - plat_ratio >>= 1; - gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; - - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - gd->bus_clk / 16 / CONFIG_BAUDRATE); - - /* copy code to RAM and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *)CONFIG_SPL_GD_ADDR; - bd_t *bd; - - memset(gd, 0, sizeof(gd_t)); - bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); - memset(bd, 0, sizeof(bd_t)); - gd->bd = bd; - bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; - bd->bi_memsize = CONFIG_SYS_L2_SIZE; - - arch_cpu_init(); - get_clocks(); - mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, - CONFIG_SPL_RELOC_MALLOC_SIZE); - gd->flags |= GD_FLG_FULL_MALLOC_INIT; - - /* relocate environment function pointers etc. */ - nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)SPL_ENV_ADDR); - gd->env_addr = (ulong)(SPL_ENV_ADDR); - gd->env_valid = ENV_VALID; - - i2c_init_all(); - - dram_init(); - -#ifdef CONFIG_SPL_NAND_BOOT - puts("TPL\n"); -#else - puts("SPL\n"); -#endif - - nand_boot(); -} diff --git a/board/freescale/c29xpcie/spl_minimal.c b/board/freescale/c29xpcie/spl_minimal.c deleted file mode 100644 index 8193afdf6a..0000000000 --- a/board/freescale/c29xpcie/spl_minimal.c +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -void board_init_f(ulong bootflag) -{ - u32 plat_ratio; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - -#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM) - set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); - set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); -#endif - - /* initialize selected port with appropriate baud rate */ - plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; - plat_ratio >>= 1; - gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; - - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - gd->bus_clk / 16 / CONFIG_BAUDRATE); - - puts("\nNAND boot...\n"); - - /* copy code to RAM and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - puts("SPL\n"); - nand_boot(); -} - -void putc(char c) -{ - if (c == '\n') - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); - - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); -} - -void puts(const char *str) -{ - while (*str) - putc(*str++); -} diff --git a/board/freescale/c29xpcie/tlb.c b/board/freescale/c29xpcie/tlb.c deleted file mode 100644 index ef844a0b3d..0000000000 --- a/board/freescale/c29xpcie/tlb.c +++ /dev/null @@ -1,84 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_1M, 1), - -#ifndef CONFIG_SPL_BUILD - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, - 0, 1, BOOKE_PAGESZ_64M, 1), - -#ifdef CONFIG_PCI - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_256K, 1), -#endif -#endif - - SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_64K, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_64K, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE, - CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 6, BOOKE_PAGESZ_256K, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE + 0x40000, - CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS + 0x40000, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 7, BOOKE_PAGESZ_256K, 1), - -#if defined(CONFIG_SYS_RAMBOOT) || \ - (defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, - CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 8, BOOKE_PAGESZ_256M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 9, BOOKE_PAGESZ_256M, 1), -#endif - -#ifdef CONFIG_SYS_INIT_L2_ADDR - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, - 0, 12, BOOKE_PAGESZ_256K, 1) -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/C29XPCIE_NAND_defconfig b/configs/C29XPCIE_NAND_defconfig deleted file mode 100644 index cdcf50eee8..0000000000 --- a/configs/C29XPCIE_NAND_defconfig +++ /dev/null @@ -1,70 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11001000 -CONFIG_ENV_SIZE=0x100000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_TPL_LIBCOMMON_SUPPORT=y -CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0xFF800000 -CONFIG_MPC85xx=y -CONFIG_TARGET_C29XPCIE=y -CONFIG_SYS_CUSTOM_LDSCRIPT=y -CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=-1 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_MISC_INIT_R is not set -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_TPL=y -CONFIG_TPL_ENV_SUPPORT=y -CONFIG_TPL_I2C_SUPPORT=y -CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_TPL_NAND_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_DOS_PARTITION=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_CAAM=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_OF_LIBFDT=y diff --git a/configs/C29XPCIE_NOR_SECBOOT_defconfig b/configs/C29XPCIE_NOR_SECBOOT_defconfig deleted file mode 100644 index e43c72860a..0000000000 --- a/configs/C29XPCIE_NOR_SECBOOT_defconfig +++ /dev/null @@ -1,55 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_NXP_ESBC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_C29XPCIE=y -# CONFIG_SYS_MALLOC_F is not set -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=-1 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_MISC_INIT_R is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_DOS_PARTITION=y -CONFIG_DM=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_RSA=y -CONFIG_SPL_RSA=y -CONFIG_RSA_SOFTWARE_EXP=y -CONFIG_OF_LIBFDT=y diff --git a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig deleted file mode 100644 index b7eb77e2a0..0000000000 --- a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig +++ /dev/null @@ -1,57 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_NXP_ESBC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_C29XPCIE=y -# CONFIG_SYS_MALLOC_F is not set -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_BOOTDELAY=-1 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_MISC_INIT_R is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_DOS_PARTITION=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_DM=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_RSA=y -CONFIG_SPL_RSA=y -CONFIG_RSA_SOFTWARE_EXP=y -CONFIG_OF_LIBFDT=y diff --git a/configs/C29XPCIE_SPIFLASH_defconfig b/configs/C29XPCIE_SPIFLASH_defconfig deleted file mode 100644 index 9bfdcd0461..0000000000 --- a/configs/C29XPCIE_SPIFLASH_defconfig +++ /dev/null @@ -1,55 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_MPC85xx=y -CONFIG_TARGET_C29XPCIE=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_BOOTDELAY=-1 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_MISC_INIT_R is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_DOS_PARTITION=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_CAAM=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_OF_LIBFDT=y diff --git a/configs/C29XPCIE_defconfig b/configs/C29XPCIE_defconfig deleted file mode 100644 index 3e7f19692a..0000000000 --- a/configs/C29XPCIE_defconfig +++ /dev/null @@ -1,53 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -CONFIG_TARGET_C29XPCIE=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=-1 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_MISC_INIT_R is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_DOS_PARTITION=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0xEFF20000 -CONFIG_FSL_CAAM=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h deleted file mode 100644 index 9a8cba6b7c..0000000000 --- a/include/configs/C29XPCIE.h +++ /dev/null @@ -1,443 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -/* - * C29XPCIE board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -#ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH -#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc -#endif - -#ifdef CONFIG_MTD_RAW_NAND -#ifdef CONFIG_TPL_BUILD -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_NAND_INIT -#define CONFIG_TPL_DRIVERS_MISC_SUPPORT -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SPL_MAX_SIZE (128 << 10) -#define CONFIG_TPL_TEXT_BASE 0xf8f81000 -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) -#elif defined(CONFIG_SPL_BUILD) -#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_NAND_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_MAX_SIZE 8192 -#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 -#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) -#endif -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_TPL_PAD_TO 0x20000 -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#endif - -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -#ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE -#elif defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif - -/* High Level Configuration Options */ -#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ - -#ifdef CONFIG_PCI -#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - -/* - * PCI Windows - * Memory space is mapped 1-1, but I/O space must start from 0. - */ -/* controller 1, Slot 1, tgtid 1, Base address a000 */ -#define CONFIG_SYS_PCIE1_NAME "Slot 1" -#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ -#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#endif - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_DDR_CLK_FREQ 100000000 -#define CONFIG_SYS_CLK_FREQ 66666666 - -#define CONFIG_HWCONFIG - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - - -#define CONFIG_ENABLE_36BIT_PHYS - -#define CONFIG_ADDR_MAP 1 -#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ - -/* DDR Setup */ -#define CONFIG_DDR_SPD -#define CONFIG_SYS_SPD_BUS_NUM 0 -#define SPD_EEPROM_ADDRESS 0x50 -#define CONFIG_SYS_DDR_RAW_TIMING - -/* DDR ECC Setup*/ -#define CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER - -#define CONFIG_SYS_SDRAM_SIZE 512 -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 - -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* Platform SRAM setting */ -#define CONFIG_SYS_PLATFORM_SRAM_BASE 0xffb00000 -#define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \ - (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE) -#define CONFIG_SYS_PLATFORM_SRAM_SIZE (512 << 10) - -/* - * IFC Definitions - */ -/* NOR Flash on IFC */ -#define CONFIG_SYS_FLASH_BASE 0xec000000 -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ - -#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) - -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* in ms */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* in ms */ - -/* 16Bit NOR Flash - S29GL512S10TFI01 */ -#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ - CSPR_PORT_SIZE_16 | \ - CSPR_MSEL_NOR | \ - CSPR_V) -#define CONFIG_SYS_NOR_AMASK IFC_AMASK(64*1024*1024) -#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) - -#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ - FTIM0_NOR_TEADC(0x5) | \ - FTIM0_NOR_TEAHC(0x5)) -#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ - FTIM1_NOR_TRAD_NOR(0x1A) |\ - FTIM1_NOR_TSEQRAD_NOR(0x13)) -#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ - FTIM2_NOR_TCH(0x4) | \ - FTIM2_NOR_TWPH(0x0E) | \ - FTIM2_NOR_TWP(0x1c)) -#define CONFIG_SYS_NOR_FTIM3 0x0 - -/* CFI for NOR Flash */ -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* NAND Flash on IFC */ -#define CONFIG_NAND_FSL_IFC -#define CONFIG_SYS_NAND_BASE 0xff800000 -#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull - -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (1024 * 1024) - -/* 8Bit NAND Flash - K9F1G08U0B */ -#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | CSPR_PORT_SIZE_8 \ - | CSPR_MSEL_NAND \ - | CSPR_V) -#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) -#define CONFIG_SYS_NAND_OOBSIZE 0x00000280 /* 640b */ -#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ - | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ - | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ - | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \ - | CSOR_NAND_PGS_8K /* Page Size = 8K */ \ - | CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\ - | CSOR_NAND_PB(128)) /*128 Pages Per Block*/ -#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x01) | \ - FTIM0_NAND_TWP(0x0c) | \ - FTIM0_NAND_TWCHT(0x08) | \ - FTIM0_NAND_TWH(0x06)) -#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x28) | \ - FTIM1_NAND_TWBE(0x1d) | \ - FTIM1_NAND_TRR(0x08) | \ - FTIM1_NAND_TRP(0x0c)) -#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0c) | \ - FTIM2_NAND_TREH(0x0a) | \ - FTIM2_NAND_TWHRE(0x18)) -#define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x04)) - -#define CONFIG_SYS_NAND_DDR_LAW 11 - -/* Set up IFC registers for boot location NOR/NAND */ -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR -#define CONFIG_SYS_CSOR0_EXT CONFIG_SYS_NAND_OOBSIZE -#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR -#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 -#else -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR -#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR -#define CONFIG_SYS_CSOR1_EXT CONFIG_SYS_NAND_OOBSIZE -#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 -#endif - -/* CPLD on IFC, selected by CS2 */ -#define CONFIG_SYS_CPLD_BASE 0xffdf0000 -#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull \ - | CONFIG_SYS_CPLD_BASE) - -#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ - | CSPR_PORT_SIZE_8 \ - | CSPR_MSEL_GPCM \ - | CSPR_V) -#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) -#define CONFIG_SYS_CSOR2 0x0 -/* CPLD Timing parameters for IFC CS2 */ -#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ - FTIM0_GPCM_TEADC(0x0e) | \ - FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ - FTIM1_GPCM_TRAD(0x1f)) -#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x8) | \ - FTIM2_GPCM_TWP(0x1f)) -#define CONFIG_SYS_CS2_FTIM3 0x0 - -#if defined(CONFIG_RAMBOOT_SPIFLASH) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) - -/* - * Config the L2 Cache as L2 SRAM - */ -#if defined(CONFIG_SPL_BUILD) -#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_L2_SIZE (256 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (96 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) -#elif defined(CONFIG_MTD_RAW_NAND) -#ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_L2_SIZE (256 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) -#else -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_L2_SIZE (256 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) -#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) -#endif -#endif -#endif - -/* Serial Port */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) -#define CONFIG_NS16550_MIN_FUNCTIONS -#endif - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 - -/* I2C EEPROM */ -/* enable read and write access to EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 - -/* eSPI - Enhanced SPI */ - -#ifdef CONFIG_TSEC_ENET -#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" - -/* Default mode is RGMII mode */ -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 2 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define CONFIG_ETHPRIME "eTSEC1" -#endif /* CONFIG_TSEC_ENET */ - -/* - * Environment - */ -#if defined(CONFIG_SYS_RAMBOOT) -#elif defined(CONFIG_MTD_RAW_NAND) -#ifdef CONFIG_TPL_BUILD -#define SPL_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) -#else -#define CONFIG_ENV_RANGE CONFIG_ENV_SIZE -#endif -#endif - -#define CONFIG_LOADS_ECHO -#define CONFIG_SYS_LOADS_BAUD_CHANGE - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -/* - * Environment Configuration - */ - -#ifdef CONFIG_TSEC_ENET -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#endif - -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_DEF_HWCONFIG fsl_ddr:ecc=on - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ - "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ - "loadaddr=1000000\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=rootfs.ext2.gz.uboot\0" \ - "fdtaddr=1e00000\0" \ - "fdtfile=name/of/device-tree.dtb\0" \ - "othbootargs=ramdisk_size=600000\0" \ - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND - -#include - -#endif /* __CONFIG_H */ -- 2.25.1