From 41c881c0caed2dd0cc6824ad7b355e15e6c410cd Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 24 Oct 2011 08:08:00 +0000 Subject: [PATCH] mx53: Turn off child clocks before reconfigure perclk_root In addition to ensuring that PERCLK remains at least 2.5 times slower than the AHB clock, certain steps need to be followed to ensure robust operation of PERCLK when reconfiguring the PERCLK clock source. To properly configure the PERCLK clock source, the following steps are required: 1.In the CCGR registers, gate the clocks to all PERCLK-dependent modules. 2.Select the desired input clock for the PERCLK root clock (to be either source from the peripherals main source clock or the lp_apm clock source). Refer to the CMCBR register, perclk_lp_apm_sel bit. 3.Configure the perclk_pred1, perclk_pred2, and perclk_podf dividers to the desired setting. Refer to the CBCDR register for details. 4.In the CCGR registers, enable the desired clocks for the PERCLK-dependent module clocks. If these steps aren't followed, GPT timer may stop and the kernel stops at "Calibrating delay loop". Signed-off-by: Terry Lv Signed-off-by: Fabio Estevam --- arch/arm/cpu/armv7/mx5/lowlevel_init.S | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 7e37221e03..01f6d759b9 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -180,6 +180,21 @@ 1: ldr r1, [r0, #CLKCTL_CDHIPR] cmp r1, #0x0 bne 1b +#else + ldr r1, =0x3FFFFFFF + str r1, [r0, #CLKCTL_CCGR0] + ldr r1, =0x0 + str r1, [r0, #CLKCTL_CCGR1] + str r1, [r0, #CLKCTL_CCGR2] + str r1, [r0, #CLKCTL_CCGR3] + str r1, [r0, #CLKCTL_CCGR7] + + ldr r1, =0x00030000 + str r1, [r0, #CLKCTL_CCGR4] + ldr r1, =0x00FFF030 + str r1, [r0, #CLKCTL_CCGR5] + ldr r1, =0x0F00030F + str r1, [r0, #CLKCTL_CCGR6] #endif /* Switch ARM to step clock */ -- 2.25.1