From 41ad9ed13a7792775ad3cca88e9d4eac6e594c63 Mon Sep 17 00:00:00 2001 From: Daniel Gonzalez Cabanelas Date: Sat, 3 Dec 2016 15:51:05 +0100 Subject: [PATCH] brcm63xx: Add Observa VH4032N support Add support for the Observa Telecom VH4032N router. This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB host ports. The wifi chip is an onboard Broadcom BCM43222. Signed-off-by: Daniel Gonzalez Cabanelas [jonas.gorski: use gpio-hog instead of abusing ephy-reset] Signed-off-by: Jonas Gorski --- .../base-files/etc/board.d/02_network | 5 + target/linux/brcm63xx/base-files/etc/diag.sh | 3 + .../base-files/etc/uci-defaults/09_fix_crc | 1 + .../linux/brcm63xx/base-files/lib/brcm63xx.sh | 3 + target/linux/brcm63xx/dts/vh4032n.dts | 102 ++++++++++++++++++ target/linux/brcm63xx/image/bcm63xx.mk | 15 +++ .../patches-4.4/577-board_VH4032N.patch | 64 +++++++++++ 7 files changed, 193 insertions(+) create mode 100644 target/linux/brcm63xx/dts/vh4032n.dts create mode 100644 target/linux/brcm63xx/patches-4.4/577-board_VH4032N.patch diff --git a/target/linux/brcm63xx/base-files/etc/board.d/02_network b/target/linux/brcm63xx/base-files/etc/board.d/02_network index 1cf54cbff2..ff5fc7a201 100755 --- a/target/linux/brcm63xx/base-files/etc/board.d/02_network +++ b/target/linux/brcm63xx/base-files/etc/board.d/02_network @@ -99,6 +99,11 @@ vr-3026e) "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "8t@eth0" ;; +vh4032n) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "8t@eth0" + ;; + bcm96368mvwg) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "4:lan" "5:lan" "8t@eth0" diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh index 5f9a4d0b1c..df1d616f65 100644 --- a/target/linux/brcm63xx/base-files/etc/diag.sh +++ b/target/linux/brcm63xx/base-files/etc/diag.sh @@ -36,6 +36,9 @@ set_state() { spw303v) status_led="spw303v:green:power+adsl" ;; + vh4032n) + status_led="VH4032N:red:power" + ;; vr-3025un) status_led="VR-3025un:green:power" ;; diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc index 1201168feb..650db9da60 100644 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc @@ -31,6 +31,7 @@ case "$(brcm63xx_board_name)" in spw303v |\ v2110 |\ v2500v_bb |\ + vh4032n |\ vr-3025u |\ vr-3025un |\ vr-3026e |\ diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh index 1679482dbe..bceba8fe13 100755 --- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh +++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh @@ -192,6 +192,9 @@ brcm63xx_dt_detect() { "NuCom R5010UN v2") board_name="r5010un_v2" ;; + "Observa VH4032N") + board_name="vh4032n" + ;; "Pirelli A226G") board_name="a226g" ;; diff --git a/target/linux/brcm63xx/dts/vh4032n.dts b/target/linux/brcm63xx/dts/vh4032n.dts new file mode 100644 index 0000000000..8b8abd9b4a --- /dev/null +++ b/target/linux/brcm63xx/dts/vh4032n.dts @@ -0,0 +1,102 @@ +/dts-v1/; + +#include "bcm6368.dtsi" + +#include + +/ { + model = "Observa VH4032N"; + compatible = "observa,vh4032n", "brcm,bcm6368"; + + chosen { + bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + debounce-interval = <60>; + + reset { + label = "reset"; + gpios = <&gpio1 2 1>; + linux,code = ; + }; + wps { + label = "wps"; + gpios = <&gpio1 3 1>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + dsl_blue { + label = "VH4032N:blue:dsl"; + gpios = <&gpio0 2 1>; + }; + dsl_red { + label = "VH4032N:red:dsl"; + gpios = <&gpio0 5 1>; + }; + hspa_blue { + label = "VH4032N:blue:hspa"; + gpios = <&gpio0 11 1>; + }; + hspa_red { + label = "VH4032N:red:hspa"; + gpios = <&gpio0 12 1>; + }; + power_blue { + label = "VH4032N:blue:power"; + gpios = <&gpio0 22 0>; + }; + power_red { + label = "VH4032N:red:power"; + gpios = <&gpio0 24 0>; + default-state = "on"; + }; + voice_blue { + label = "VH4032N:blue:voice"; + gpios = <&gpio0 25 1>; + }; + voice_red { + label = "VH4032N:red:voice"; + gpios = <&gpio0 26 1>; + }; + }; +}; + +&gpio0 { + usb_hub_reset { + gpio-hog; + gpios = <27 0>; + output-high; + line-name = "usb-hub-reset-gpio"; + }; +}; + +&pflash { + status = "ok"; + + linux,part-probe = "bcm63xxpart"; + + cfe@0 { + label = "CFE"; + reg = <0x0000000 0x0020000>; + read-only; + }; + + linux@20000 { + label = "linux"; + reg = <0x0020000 0x1fc0000>; + }; + + nvram@1fe0000 { + label = "nvram"; + reg = <0x1fe0000 0x020000>; + }; +}; diff --git a/target/linux/brcm63xx/image/bcm63xx.mk b/target/linux/brcm63xx/image/bcm63xx.mk index f38147eb36..0749c292e3 100644 --- a/target/linux/brcm63xx/image/bcm63xx.mk +++ b/target/linux/brcm63xx/image/bcm63xx.mk @@ -818,6 +818,21 @@ define Device/R5010UNv2 endef TARGET_DEVICES += R5010UNv2 +### Observa ### +define Device/VH4032N + $(Device/bcm63xx) + IMAGES += sysupgrade.bin + DEVICE_TITLE := Observa VH4032N + DEVICE_DTS := vh4032n + CFE_BOARD_ID := 96368VVW + CFE_CHIP_ID := 6368 + BLOCK_SIZE := 0x20000 + FLASH_MB := 32 + DEVICE_PACKAGES := \ + $(B43_PACKAGES) $(USB2_PACKAGES) +endef +TARGET_DEVICES += VH4032N + ### Pirelli ### define Device/A226G $(Device/bcm63xx) diff --git a/target/linux/brcm63xx/patches-4.4/577-board_VH4032N.patch b/target/linux/brcm63xx/patches-4.4/577-board_VH4032N.patch new file mode 100644 index 0000000000..2e5c13e577 --- /dev/null +++ b/target/linux/brcm63xx/patches-4.4/577-board_VH4032N.patch @@ -0,0 +1,64 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2356,6 +2356,45 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_VH4032N = { ++ .name = "VH4032N", ++ .expected_cpu_id = 0x6368, ++ ++ .has_uart0 = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "LAN4", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "LAN3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "LAN2", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "LAN1", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++}; ++ + static struct b53_platform_data WAP5813n_b53_pdata = { + .alias = "eth0", + }; +@@ -2662,6 +2701,7 @@ static const struct board_info __initcon + &board_HG622, + &board_HG655b, + &board_P870HW51A_V2, ++ &board_VH4032N, + &board_VR3025u, + &board_VR3025un, + &board_VR3026e, +@@ -2773,6 +2813,7 @@ static struct of_device_id const bcm963x + { .compatible = "huawei,hg655b", .data = &board_HG655b, }, + { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, }, + { .compatible = "netgear,evg2000", .data = &board_EVG2000, }, ++ { .compatible = "observa,vh4032n", .data = &board_VH4032N, }, + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, + #endif + #ifdef CONFIG_BCM63XX_CPU_63268 -- 2.25.1