From 4024006e528b2f062024796c15293a820409c232 Mon Sep 17 00:00:00 2001 From: Ryder Lee Date: Thu, 22 Aug 2019 12:26:54 +0200 Subject: [PATCH] dt-bindings: phy: add a document for MediaTek tphy This adds a document for tphy which supports physical layer functionality for a number of controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA. Signed-off-by: Ryder Lee Signed-off-by: Frank Wunderlich --- doc/device-tree-bindings/phy/phy-mtk-tphy.txt | 86 +++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 doc/device-tree-bindings/phy/phy-mtk-tphy.txt diff --git a/doc/device-tree-bindings/phy/phy-mtk-tphy.txt b/doc/device-tree-bindings/phy/phy-mtk-tphy.txt new file mode 100644 index 0000000000..037c5a4be5 --- /dev/null +++ b/doc/device-tree-bindings/phy/phy-mtk-tphy.txt @@ -0,0 +1,86 @@ +MediaTek T-PHY binding +-------------------------- + +T-phy controller supports physical layer functionality for a number of +controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA. + +Required properties (controller (parent) node): + - compatible : should be one of + "mediatek,generic-tphy-v1" + - clocks : (deprecated, use port's clocks instead) a list of phandle + + clock-specifier pairs, one for each entry in clock-names + - clock-names : (deprecated, use port's one instead) must contain + "u3phya_ref": for reference clock of usb3.0 analog phy. + +Required nodes : a sub-node is required for each port the controller + provides. Address range information including the usual + 'reg' property is used inside these nodes to describe + the controller's topology. + +Optional properties (controller (parent) node): + - reg : offset and length of register shared by multiple ports, + exclude port's private register. + - mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate + calibrate + - mediatek,src-coef : coefficient for slew rate calibrate, depends on + SoC process + +Required properties (port (child) node): +- reg : address and length of the register set for the port. +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names +- clock-names : must contain + "ref": 48M reference clock for HighSpeed analog phy; and 26M + reference clock for SuperSpeed analog phy, sometimes is + 24M, 25M or 27M, depended on platform. +- #phy-cells : should be 1 (See second example) + cell after port phandle is phy type from: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + - PHY_TYPE_PCIE + - PHY_TYPE_SATA + +Example: + + u3phy2: usb-phy@1a244000 { + compatible = "mediatek,generic-tphy-v1"; + reg = <0x1a244000 0x0700>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + u2port1: usb-phy@1a244800 { + reg = <0x1a244800 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u3port1: usb-phy@1a244900 { + reg = <0x1a244900 0x0700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + +Specifying phy control of devices +--------------------------------- + +Device nodes should specify the configuration required in their "phys" +property, containing a phandle to the phy port node and a device type; +phy-names for each port are optional. + +Example: + +#include + +usb30: usb@11270000 { + ... + phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; + phy-names = "usb2-0", "usb3-0"; + ... +}; -- 2.25.1