From 3fd9579085fae691760486f595b9eda228bfc656 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Fri, 9 Jun 2017 13:13:12 -0700 Subject: [PATCH] imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit i.MX 6UL and 6ULL have different boot device capabilities and use therefor use a different boot device selection table than other i.MX 6 devices. Particularly, the value which has been used so far (b0001) is assigned to QSPI boot for these two devices. There is no common reserved value for all i.MX 6devices. Use b0010 for i.MX 6UL and 6ULL via compile time ifdef. Reported-by: Joël Esponde Signed-off-by: Stefan Agner Reviewed-by: Fabio Estevam Tested-by: Joël Esponde --- arch/arm/cpu/armv7/mx6/soc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 2bedbdbf20..b881766487 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -548,7 +548,11 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) const struct boot_mode soc_boot_modes[] = { {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, /* reserved value should start rom usb */ +#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) + {"usb", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, +#else {"usb", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)}, +#endif {"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, {"ecspi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)}, {"ecspi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)}, -- 2.25.1