From 3ef64444de157a2e4f6a61b3ea617b9d201a6836 Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Wed, 22 May 2019 00:09:46 -0700 Subject: [PATCH] dm: net: macb: Implement link speed change callback At present the link speed change callback is a nop. According to macb device tree bindings, an optional "tx_clk" is used to clock the ethernet controller's TX_CLK under different link speed. In 10/100 MII mode, transmit logic must be clocked from a free running clock generated by the external PHY. In gigabit GMII mode, the controller, not the external PHY, must generate the 125 MHz transmit clock towards the PHY. Signed-off-by: Bin Meng Reviewed-by: Lukas Auer Tested-by: Lukas Auer Acked-by: Joe Hershberger --- drivers/net/macb.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/net/macb.c b/drivers/net/macb.c index b7f404e857..c5560a7111 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -497,6 +497,41 @@ static int macb_phy_find(struct macb_device *macb, const char *name) #ifdef CONFIG_DM_ETH int __weak macb_linkspd_cb(struct udevice *dev, unsigned int speed) { +#ifdef CONFIG_CLK + struct clk tx_clk; + ulong rate; + int ret; + + /* + * "tx_clk" is an optional clock source for MACB. + * Ignore if it does not exist in DT. + */ + ret = clk_get_by_name(dev, "tx_clk", &tx_clk); + if (ret) + return 0; + + switch (speed) { + case _10BASET: + rate = 2500000; /* 2.5 MHz */ + break; + case _100BASET: + rate = 25000000; /* 25 MHz */ + break; + case _1000BASET: + rate = 125000000; /* 125 MHz */ + break; + default: + /* does not change anything */ + return 0; + } + + if (tx_clk.dev) { + ret = clk_set_rate(&tx_clk, rate); + if (ret) + return ret; + } +#endif + return 0; } #else -- 2.25.1