From 3ea657a3e9e755239446dcdbe65069aabc4ecb25 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 30 Apr 2010 15:53:08 +0000 Subject: [PATCH] kernel: bring ssb in sync with upstream (as of current wireless-testing) SVN-Revision: 21269 --- .../patches-2.6.32/150-cpu_fixes.patch | 4 +- .../180-ssb_extif_interrupt.patch | 36 - .../brcm47xx/patches-2.6.32/220-bcm5354.patch | 6 +- .../700-ssb-gigabit-ethernet-driver.patch | 34 +- .../813-use_netdev_alloc_skb.patch | 2 +- .../patches-2.6.32/920-cache-wround.patch | 10 +- .../930-bcm47xx-pci-iomem.patch | 51 - .../patches-2.6.32/951-brcm4716-defines.patch | 2 +- .../180-ssb_extif_interrupt.patch | 36 - .../brcm47xx/patches-2.6.33/220-bcm5354.patch | 6 +- .../930-bcm47xx-pci-iomem.patch | 51 - .../patches-2.6.33/951-brcm4716-defines.patch | 2 +- .../brcm47xx/patches-2.6.34/220-bcm5354.patch | 6 +- .../patches-2.6.34/951-brcm4716-defines.patch | 2 +- .../patches-2.6.30/941-ssb_update.patch | 1113 +++++++++++++-- .../patches-2.6.32/975-ssb_update.patch | 1231 +++++++++++++++++ .../patches-2.6.33/975-ssb_update.patch | 644 +++++++++ .../patches-2.6.34/975-ssb_update.patch | 530 +++++++ 18 files changed, 3478 insertions(+), 288 deletions(-) delete mode 100644 target/linux/brcm47xx/patches-2.6.32/180-ssb_extif_interrupt.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.32/930-bcm47xx-pci-iomem.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.33/180-ssb_extif_interrupt.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.33/930-bcm47xx-pci-iomem.patch create mode 100644 target/linux/generic-2.6/patches-2.6.32/975-ssb_update.patch create mode 100644 target/linux/generic-2.6/patches-2.6.33/975-ssb_update.patch create mode 100644 target/linux/generic-2.6/patches-2.6.34/975-ssb_update.patch diff --git a/target/linux/brcm47xx/patches-2.6.32/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-2.6.32/150-cpu_fixes.patch index 9e33093070..e6ac4c8e8a 100644 --- a/target/linux/brcm47xx/patches-2.6.32/150-cpu_fixes.patch +++ b/target/linux/brcm47xx/patches-2.6.32/150-cpu_fixes.patch @@ -345,7 +345,7 @@ } --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c -@@ -739,6 +739,9 @@ static void __cpuinit build_r4000_tlb_re +@@ -733,6 +733,9 @@ static void __cpuinit build_r4000_tlb_re /* No need for uasm_i_nop */ } @@ -355,7 +355,7 @@ #ifdef CONFIG_64BIT build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */ #else -@@ -1193,6 +1196,9 @@ build_r4000_tlbchange_handler_head(u32 * +@@ -1185,6 +1188,9 @@ build_r4000_tlbchange_handler_head(u32 * struct uasm_reloc **r, unsigned int pte, unsigned int ptr) { diff --git a/target/linux/brcm47xx/patches-2.6.32/180-ssb_extif_interrupt.patch b/target/linux/brcm47xx/patches-2.6.32/180-ssb_extif_interrupt.patch deleted file mode 100644 index d89531cda1..0000000000 --- a/target/linux/brcm47xx/patches-2.6.32/180-ssb_extif_interrupt.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 83e34f03ee9b86b49bde4707a1fe03a1837e29be Mon Sep 17 00:00:00 2001 -From: Jochen Friedrich -Date: Wed, 3 Feb 2010 21:28:11 +0100 -Subject: [PATCH 1/1] ssb: fix interrupt assignment - -Explicitely enable shared interrupt 2 for any core that didn't get a dedicated IRQ -anymore (fallthrough case) and for EXTIF cores to make gpio interrupts work. -Also remove a bogus comment. - -Signed-off-by: Jochen Friedrich -Signed-off-by: John W. Linville ---- - drivers/ssb/driver_mipscore.c | 5 ++++- - 1 files changed, 4 insertions(+), 1 deletions(-) - ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco - set_irq(dev, irq++); - } - break; -- /* fallthrough */ - case SSB_DEV_PCI: - case SSB_DEV_ETHERNET: - case SSB_DEV_ETHERNET_GBIT: -@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco - set_irq(dev, irq++); - break; - } -+ /* fallthrough */ -+ case SSB_DEV_EXTIF: -+ set_irq(dev, 0); -+ break; - } - } - ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); diff --git a/target/linux/brcm47xx/patches-2.6.32/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.32/220-bcm5354.patch index 360751a7ad..1d75e171d3 100644 --- a/target/linux/brcm47xx/patches-2.6.32/220-bcm5354.patch +++ b/target/linux/brcm47xx/patches-2.6.32/220-bcm5354.patch @@ -1,6 +1,6 @@ --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c -@@ -258,6 +258,8 @@ void ssb_chipco_resume(struct ssb_chipco +@@ -260,6 +260,8 @@ void ssb_chipco_resume(struct ssb_chipco void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, u32 *plltype, u32 *n, u32 *m) { @@ -9,7 +9,7 @@ *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); switch (*plltype) { -@@ -281,6 +283,8 @@ void ssb_chipco_get_clockcpu(struct ssb_ +@@ -283,6 +285,8 @@ void ssb_chipco_get_clockcpu(struct ssb_ void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, u32 *plltype, u32 *n, u32 *m) { @@ -31,7 +31,7 @@ } --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -1066,6 +1066,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) +@@ -1073,6 +1073,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) if (bus->chip_id == 0x5365) { rate = 100000000; diff --git a/target/linux/brcm47xx/patches-2.6.32/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-2.6.32/700-ssb-gigabit-ethernet-driver.patch index de25019506..dce689f199 100644 --- a/target/linux/brcm47xx/patches-2.6.32/700-ssb-gigabit-ethernet-driver.patch +++ b/target/linux/brcm47xx/patches-2.6.32/700-ssb-gigabit-ethernet-driver.patch @@ -102,7 +102,7 @@ tg3_readphy(tp, MII_BMSR, &tmp); if (!tg3_readphy(tp, MII_BMSR, &tmp) && (tmp & BMSR_LSTATUS)) -@@ -6264,6 +6289,11 @@ static int tg3_poll_fw(struct tg3 *tp) +@@ -6273,6 +6298,11 @@ static int tg3_poll_fw(struct tg3 *tp) int i; u32 val; @@ -114,7 +114,7 @@ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { /* Wait up to 20ms for init done. */ for (i = 0; i < 200; i++) { -@@ -6541,6 +6571,14 @@ static int tg3_chip_reset(struct tg3 *tp +@@ -6550,6 +6580,14 @@ static int tg3_chip_reset(struct tg3 *tp tw32(0x5000, 0x400); } @@ -129,7 +129,7 @@ tw32(GRC_MODE, tp->grc_mode); if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) { -@@ -6695,9 +6733,12 @@ static int tg3_halt_cpu(struct tg3 *tp, +@@ -6704,9 +6742,12 @@ static int tg3_halt_cpu(struct tg3 *tp, return -ENODEV; } @@ -145,7 +145,7 @@ return 0; } -@@ -6760,6 +6801,11 @@ static int tg3_load_5701_a0_firmware_fix +@@ -6769,6 +6810,11 @@ static int tg3_load_5701_a0_firmware_fix const __be32 *fw_data; int err, i; @@ -157,7 +157,7 @@ fw_data = (void *)tp->fw->data; /* Firmware blob starts with version numbers, followed by -@@ -6819,6 +6865,11 @@ static int tg3_load_tso_firmware(struct +@@ -6828,6 +6874,11 @@ static int tg3_load_tso_firmware(struct unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size; int err, i; @@ -169,7 +169,7 @@ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) return 0; -@@ -7906,6 +7957,11 @@ static void tg3_timer(unsigned long __op +@@ -7915,6 +7966,11 @@ static void tg3_timer(unsigned long __op spin_lock(&tp->lock); @@ -181,7 +181,7 @@ if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) { /* All of this garbage is because when using non-tagged * IRQ status the mailbox/status_block protocol the chip -@@ -9791,6 +9847,11 @@ static int tg3_test_nvram(struct tg3 *tp +@@ -9800,6 +9856,11 @@ static int tg3_test_nvram(struct tg3 *tp if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) return 0; @@ -193,7 +193,7 @@ if (tg3_nvram_read(tp, 0, &magic) != 0) return -EIO; -@@ -10585,7 +10646,7 @@ static int tg3_ioctl(struct net_device * +@@ -10594,7 +10655,7 @@ static int tg3_ioctl(struct net_device * return -EAGAIN; spin_lock_bh(&tp->lock); @@ -202,7 +202,7 @@ spin_unlock_bh(&tp->lock); data->val_out = mii_regval; -@@ -10601,7 +10662,7 @@ static int tg3_ioctl(struct net_device * +@@ -10610,7 +10671,7 @@ static int tg3_ioctl(struct net_device * return -EAGAIN; spin_lock_bh(&tp->lock); @@ -211,7 +211,7 @@ spin_unlock_bh(&tp->lock); return err; -@@ -11246,6 +11307,12 @@ static void __devinit tg3_get_5717_nvram +@@ -11255,6 +11316,12 @@ static void __devinit tg3_get_5717_nvram /* Chips other than 5700/5701 use the NVRAM for fetching info. */ static void __devinit tg3_nvram_init(struct tg3 *tp) { @@ -224,7 +224,7 @@ tw32_f(GRC_EEPROM_ADDR, (EEPROM_ADDR_FSM_RESET | (EEPROM_DEFAULT_CLOCK_PERIOD << -@@ -11506,6 +11573,9 @@ static int tg3_nvram_write_block(struct +@@ -11515,6 +11582,9 @@ static int tg3_nvram_write_block(struct { int ret; @@ -234,7 +234,7 @@ if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) { tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl & ~GRC_LCLCTRL_GPIO_OUTPUT1); -@@ -12788,6 +12858,11 @@ static int __devinit tg3_get_invariants( +@@ -12800,6 +12870,11 @@ static int __devinit tg3_get_invariants( GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701))) tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG; @@ -246,7 +246,7 @@ /* Get eeprom hw config before calling tg3_set_power_state(). * In particular, the TG3_FLG2_IS_NIC flag must be * determined before calling tg3_set_power_state() so that -@@ -13177,6 +13252,10 @@ static int __devinit tg3_get_device_addr +@@ -13189,6 +13264,10 @@ static int __devinit tg3_get_device_addr } if (!is_valid_ether_addr(&dev->dev_addr[0])) { @@ -257,7 +257,7 @@ #ifdef CONFIG_SPARC if (!tg3_get_default_macaddr_sparc(tp)) return 0; -@@ -13669,6 +13748,7 @@ static char * __devinit tg3_phy_string(s +@@ -13681,6 +13760,7 @@ static char * __devinit tg3_phy_string(s case PHY_ID_BCM5704: return "5704"; case PHY_ID_BCM5705: return "5705"; case PHY_ID_BCM5750: return "5750"; @@ -265,7 +265,7 @@ case PHY_ID_BCM5752: return "5752"; case PHY_ID_BCM5714: return "5714"; case PHY_ID_BCM5780: return "5780"; -@@ -13880,6 +13960,13 @@ static int __devinit tg3_init_one(struct +@@ -13892,6 +13972,13 @@ static int __devinit tg3_init_one(struct tp->msg_enable = tg3_debug; else tp->msg_enable = TG3_DEF_MSG_ENABLE; @@ -291,7 +291,7 @@ #define NIC_SRAM_RX_MINI_BUFFER_DESC 0x00001000 -@@ -2821,6 +2824,7 @@ struct tg3 { +@@ -2824,6 +2827,7 @@ struct tg3 { #define PHY_ID_BCM5714 0x60008340 #define PHY_ID_BCM5780 0x60008350 #define PHY_ID_BCM5755 0xbc050cc0 @@ -299,7 +299,7 @@ #define PHY_ID_BCM5787 0xbc050ce0 #define PHY_ID_BCM5756 0xbc050ed0 #define PHY_ID_BCM5784 0xbc050fa0 -@@ -2865,7 +2869,7 @@ struct tg3 { +@@ -2868,7 +2872,7 @@ struct tg3 { (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \ (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \ (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM5761 || \ diff --git a/target/linux/brcm47xx/patches-2.6.32/813-use_netdev_alloc_skb.patch b/target/linux/brcm47xx/patches-2.6.32/813-use_netdev_alloc_skb.patch index c431e40967..a9b2db586a 100644 --- a/target/linux/brcm47xx/patches-2.6.32/813-use_netdev_alloc_skb.patch +++ b/target/linux/brcm47xx/patches-2.6.32/813-use_netdev_alloc_skb.patch @@ -1,6 +1,6 @@ --- a/drivers/net/b44.c +++ b/drivers/net/b44.c -@@ -815,7 +815,7 @@ static int b44_rx(struct b44 *bp, int bu +@@ -848,7 +848,7 @@ static int b44_rx(struct b44 *bp, int bu struct sk_buff *copy_skb; b44_recycle_rx(bp, cons, bp->rx_prod); diff --git a/target/linux/brcm47xx/patches-2.6.32/920-cache-wround.patch b/target/linux/brcm47xx/patches-2.6.32/920-cache-wround.patch index 3a527df251..688d3e1389 100644 --- a/target/linux/brcm47xx/patches-2.6.32/920-cache-wround.patch +++ b/target/linux/brcm47xx/patches-2.6.32/920-cache-wround.patch @@ -31,7 +31,7 @@ --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c -@@ -601,6 +601,9 @@ build_get_pgde32(u32 **p, unsigned int t +@@ -595,6 +595,9 @@ build_get_pgde32(u32 **p, unsigned int t #endif uasm_i_addu(p, ptr, tmp, ptr); #else @@ -41,7 +41,7 @@ UASM_i_LA_mostly(p, ptr, pgdc); #endif uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */ -@@ -739,12 +742,12 @@ static void __cpuinit build_r4000_tlb_re +@@ -733,12 +736,12 @@ static void __cpuinit build_r4000_tlb_re /* No need for uasm_i_nop */ } @@ -57,7 +57,7 @@ build_get_pgde32(&p, K0, K1); /* get pgd in K1 */ #endif -@@ -756,6 +759,9 @@ static void __cpuinit build_r4000_tlb_re +@@ -750,6 +753,9 @@ static void __cpuinit build_r4000_tlb_re build_update_entries(&p, K0, K1); build_tlb_write_entry(&p, &l, &r, tlb_random); uasm_l_leave(&l, p); @@ -67,7 +67,7 @@ uasm_i_eret(&p); /* return from trap */ #ifdef CONFIG_HUGETLB_PAGE -@@ -1196,12 +1202,12 @@ build_r4000_tlbchange_handler_head(u32 * +@@ -1188,12 +1194,12 @@ build_r4000_tlbchange_handler_head(u32 * struct uasm_reloc **r, unsigned int pte, unsigned int ptr) { @@ -83,7 +83,7 @@ build_get_pgde32(p, pte, ptr); /* get pgd in ptr */ #endif -@@ -1238,6 +1244,9 @@ build_r4000_tlbchange_handler_tail(u32 * +@@ -1230,6 +1236,9 @@ build_r4000_tlbchange_handler_tail(u32 * build_update_entries(p, tmp, ptr); build_tlb_write_entry(p, l, r, tlb_indexed); uasm_l_leave(l, *p); diff --git a/target/linux/brcm47xx/patches-2.6.32/930-bcm47xx-pci-iomem.patch b/target/linux/brcm47xx/patches-2.6.32/930-bcm47xx-pci-iomem.patch deleted file mode 100644 index 4f47a3c52d..0000000000 --- a/target/linux/brcm47xx/patches-2.6.32/930-bcm47xx-pci-iomem.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore - .pci_ops = &ssb_pcicore_pciops, - .io_resource = &ssb_pcicore_io_resource, - .mem_resource = &ssb_pcicore_mem_resource, -- .mem_offset = 0x24000000, - }; - --static u32 ssb_pcicore_pcibus_iobase = 0x100; --static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; -- - /* This function is called when doing a pci_enable_device(). - * We must first check if the device is a device on the PCI-core bridge. */ - int ssb_pcicore_plat_dev_init(struct pci_dev *d) - { -- struct resource *res; -- int pos, size; -- u32 *base; -- - if (d->bus->ops != &ssb_pcicore_pciops) { - /* This is not a device on the PCI-core bridge. */ - return -ENODEV; -@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci - ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", - pci_name(d)); - -- /* Fix up resource bases */ -- for (pos = 0; pos < 6; pos++) { -- res = &d->resource[pos]; -- if (res->flags & IORESOURCE_IO) -- base = &ssb_pcicore_pcibus_iobase; -- else -- base = &ssb_pcicore_pcibus_membase; -- res->flags |= IORESOURCE_PCI_FIXED; -- if (res->end) { -- size = res->end - res->start + 1; -- if (*base & (size - 1)) -- *base = (*base + size) & ~(size - 1); -- res->start = *base; -- res->end = res->start + size - 1; -- *base += size; -- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); -- } -- /* Fix up PCI bridge BAR0 only */ -- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) -- break; -- } - /* Fix up interrupt lines */ - d->irq = ssb_mips_irq(extpci_core->dev) + 2; - pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); diff --git a/target/linux/brcm47xx/patches-2.6.32/951-brcm4716-defines.patch b/target/linux/brcm47xx/patches-2.6.32/951-brcm4716-defines.patch index 5cc51100f8..482dbad02e 100644 --- a/target/linux/brcm47xx/patches-2.6.32/951-brcm4716-defines.patch +++ b/target/linux/brcm47xx/patches-2.6.32/951-brcm4716-defines.patch @@ -60,7 +60,7 @@ /* Enumeration space constants */ #define SSB_CORE_SIZE 0x1000 /* Size of a core MMIO area */ -@@ -452,5 +454,41 @@ enum { +@@ -453,5 +455,41 @@ enum { #define SSB_ADM_BASE2 0xFFFF0000 /* Type2 base address for the core */ #define SSB_ADM_BASE2_SHIFT 16 diff --git a/target/linux/brcm47xx/patches-2.6.33/180-ssb_extif_interrupt.patch b/target/linux/brcm47xx/patches-2.6.33/180-ssb_extif_interrupt.patch deleted file mode 100644 index d89531cda1..0000000000 --- a/target/linux/brcm47xx/patches-2.6.33/180-ssb_extif_interrupt.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 83e34f03ee9b86b49bde4707a1fe03a1837e29be Mon Sep 17 00:00:00 2001 -From: Jochen Friedrich -Date: Wed, 3 Feb 2010 21:28:11 +0100 -Subject: [PATCH 1/1] ssb: fix interrupt assignment - -Explicitely enable shared interrupt 2 for any core that didn't get a dedicated IRQ -anymore (fallthrough case) and for EXTIF cores to make gpio interrupts work. -Also remove a bogus comment. - -Signed-off-by: Jochen Friedrich -Signed-off-by: John W. Linville ---- - drivers/ssb/driver_mipscore.c | 5 ++++- - 1 files changed, 4 insertions(+), 1 deletions(-) - ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco - set_irq(dev, irq++); - } - break; -- /* fallthrough */ - case SSB_DEV_PCI: - case SSB_DEV_ETHERNET: - case SSB_DEV_ETHERNET_GBIT: -@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco - set_irq(dev, irq++); - break; - } -+ /* fallthrough */ -+ case SSB_DEV_EXTIF: -+ set_irq(dev, 0); -+ break; - } - } - ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); diff --git a/target/linux/brcm47xx/patches-2.6.33/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.33/220-bcm5354.patch index f396ca745a..a6ab0292ba 100644 --- a/target/linux/brcm47xx/patches-2.6.33/220-bcm5354.patch +++ b/target/linux/brcm47xx/patches-2.6.33/220-bcm5354.patch @@ -1,6 +1,6 @@ --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c -@@ -258,6 +258,8 @@ void ssb_chipco_resume(struct ssb_chipco +@@ -260,6 +260,8 @@ void ssb_chipco_resume(struct ssb_chipco void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, u32 *plltype, u32 *n, u32 *m) { @@ -9,7 +9,7 @@ *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); switch (*plltype) { -@@ -281,6 +283,8 @@ void ssb_chipco_get_clockcpu(struct ssb_ +@@ -283,6 +285,8 @@ void ssb_chipco_get_clockcpu(struct ssb_ void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, u32 *plltype, u32 *n, u32 *m) { @@ -31,7 +31,7 @@ } --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -1069,6 +1069,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) +@@ -1072,6 +1072,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) if (bus->chip_id == 0x5365) { rate = 100000000; diff --git a/target/linux/brcm47xx/patches-2.6.33/930-bcm47xx-pci-iomem.patch b/target/linux/brcm47xx/patches-2.6.33/930-bcm47xx-pci-iomem.patch deleted file mode 100644 index 4f47a3c52d..0000000000 --- a/target/linux/brcm47xx/patches-2.6.33/930-bcm47xx-pci-iomem.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore - .pci_ops = &ssb_pcicore_pciops, - .io_resource = &ssb_pcicore_io_resource, - .mem_resource = &ssb_pcicore_mem_resource, -- .mem_offset = 0x24000000, - }; - --static u32 ssb_pcicore_pcibus_iobase = 0x100; --static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; -- - /* This function is called when doing a pci_enable_device(). - * We must first check if the device is a device on the PCI-core bridge. */ - int ssb_pcicore_plat_dev_init(struct pci_dev *d) - { -- struct resource *res; -- int pos, size; -- u32 *base; -- - if (d->bus->ops != &ssb_pcicore_pciops) { - /* This is not a device on the PCI-core bridge. */ - return -ENODEV; -@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci - ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", - pci_name(d)); - -- /* Fix up resource bases */ -- for (pos = 0; pos < 6; pos++) { -- res = &d->resource[pos]; -- if (res->flags & IORESOURCE_IO) -- base = &ssb_pcicore_pcibus_iobase; -- else -- base = &ssb_pcicore_pcibus_membase; -- res->flags |= IORESOURCE_PCI_FIXED; -- if (res->end) { -- size = res->end - res->start + 1; -- if (*base & (size - 1)) -- *base = (*base + size) & ~(size - 1); -- res->start = *base; -- res->end = res->start + size - 1; -- *base += size; -- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); -- } -- /* Fix up PCI bridge BAR0 only */ -- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) -- break; -- } - /* Fix up interrupt lines */ - d->irq = ssb_mips_irq(extpci_core->dev) + 2; - pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); diff --git a/target/linux/brcm47xx/patches-2.6.33/951-brcm4716-defines.patch b/target/linux/brcm47xx/patches-2.6.33/951-brcm4716-defines.patch index 5cc51100f8..482dbad02e 100644 --- a/target/linux/brcm47xx/patches-2.6.33/951-brcm4716-defines.patch +++ b/target/linux/brcm47xx/patches-2.6.33/951-brcm4716-defines.patch @@ -60,7 +60,7 @@ /* Enumeration space constants */ #define SSB_CORE_SIZE 0x1000 /* Size of a core MMIO area */ -@@ -452,5 +454,41 @@ enum { +@@ -453,5 +455,41 @@ enum { #define SSB_ADM_BASE2 0xFFFF0000 /* Type2 base address for the core */ #define SSB_ADM_BASE2_SHIFT 16 diff --git a/target/linux/brcm47xx/patches-2.6.34/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.34/220-bcm5354.patch index a2691b008d..1d75e171d3 100644 --- a/target/linux/brcm47xx/patches-2.6.34/220-bcm5354.patch +++ b/target/linux/brcm47xx/patches-2.6.34/220-bcm5354.patch @@ -1,6 +1,6 @@ --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c -@@ -258,6 +258,8 @@ void ssb_chipco_resume(struct ssb_chipco +@@ -260,6 +260,8 @@ void ssb_chipco_resume(struct ssb_chipco void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, u32 *plltype, u32 *n, u32 *m) { @@ -9,7 +9,7 @@ *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); switch (*plltype) { -@@ -281,6 +283,8 @@ void ssb_chipco_get_clockcpu(struct ssb_ +@@ -283,6 +285,8 @@ void ssb_chipco_get_clockcpu(struct ssb_ void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, u32 *plltype, u32 *n, u32 *m) { @@ -31,7 +31,7 @@ } --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -1070,6 +1070,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) +@@ -1073,6 +1073,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) if (bus->chip_id == 0x5365) { rate = 100000000; diff --git a/target/linux/brcm47xx/patches-2.6.34/951-brcm4716-defines.patch b/target/linux/brcm47xx/patches-2.6.34/951-brcm4716-defines.patch index 5cc51100f8..482dbad02e 100644 --- a/target/linux/brcm47xx/patches-2.6.34/951-brcm4716-defines.patch +++ b/target/linux/brcm47xx/patches-2.6.34/951-brcm4716-defines.patch @@ -60,7 +60,7 @@ /* Enumeration space constants */ #define SSB_CORE_SIZE 0x1000 /* Size of a core MMIO area */ -@@ -452,5 +454,41 @@ enum { +@@ -453,5 +455,41 @@ enum { #define SSB_ADM_BASE2 0xFFFF0000 /* Type2 base address for the core */ #define SSB_ADM_BASE2_SHIFT 16 diff --git a/target/linux/generic-2.6/patches-2.6.30/941-ssb_update.patch b/target/linux/generic-2.6/patches-2.6.30/941-ssb_update.patch index 7fdb3ca26e..8d2d158953 100644 --- a/target/linux/generic-2.6/patches-2.6.30/941-ssb_update.patch +++ b/target/linux/generic-2.6/patches-2.6.30/941-ssb_update.patch @@ -22,7 +22,28 @@ struct pmu0_plltab_entry { u16 freq; /* Crystal frequency in kHz.*/ u8 xf; /* Crystal frequency value for PMU control */ -@@ -506,3 +521,82 @@ void ssb_pmu_init(struct ssb_chipcommon +@@ -317,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_ + case 0x5354: + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; ++ case 0x4322: ++ if (cc->pmu.rev == 2) { ++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A); ++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0); ++ } ++ break; + default: + ssb_printk(KERN_ERR PFX + "ERROR: PLL init unknown for device %04X\n", +@@ -402,6 +423,7 @@ static void ssb_pmu_resources_init(struc + + switch (bus->chip_id) { + case 0x4312: ++ case 0x4322: + /* We keep the default settings: + * min_msk = 0xCBB + * max_msk = 0x7FFFF +@@ -506,3 +528,82 @@ void ssb_pmu_init(struct ssb_chipcommon ssb_pmu_pll_init(cc); ssb_pmu_resources_init(cc); } @@ -139,9 +160,12 @@ /* ssb must be initialized after PCI but before the ssb drivers. --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -169,8 +169,14 @@ err_pci: +@@ -167,10 +167,16 @@ err_pci: + } + /* Get the word-offset for a SSB_SPROM_XXX define. */ - #define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) +-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) ++#define SPOFF(offset) ((offset) / sizeof(u16)) /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ -#define SPEX(_outvar, _offset, _mask, _shift) \ +#define SPEX16(_outvar, _offset, _mask, _shift) \ @@ -155,6 +179,24 @@ static inline u8 ssb_crc8(u8 crc, u8 data) { +@@ -247,7 +253,7 @@ static int sprom_do_read(struct ssb_bus + int i; + + for (i = 0; i < bus->sprom_size; i++) +- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2)); ++ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2)); + + return 0; + } +@@ -278,7 +284,7 @@ static int sprom_do_write(struct ssb_bus + ssb_printk("75%%"); + else if (i % 2) + ssb_printk("."); +- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2)); ++ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); + mmiowb(); + msleep(20); + } @@ -474,12 +480,14 @@ static void sprom_extract_r8(struct ssb_ /* extract the MAC address */ @@ -235,6 +277,21 @@ sprom_extract_r123(out, in); } } +@@ -568,6 +620,14 @@ static int ssb_pci_sprom_get(struct ssb_ + int err = -ENOMEM; + u16 *buf; + ++ if (!ssb_is_sprom_available(bus)) { ++ ssb_printk(KERN_ERR PFX "No SPROM available!\n"); ++ return -ENODEV; ++ } ++ ++ bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ? ++ SSB_SPROM_BASE1 : SSB_SPROM_BASE31; ++ + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); + if (!buf) + goto out; --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st @@ -255,26 +312,259 @@ "Could not disable SPROM write access.\n"); failed = 1; } -@@ -678,7 +678,8 @@ int ssb_pcmcia_get_invariants(struct ssb - sprom->board_rev = tuple.TupleData[1]; - break; - case SSB_PCMCIA_CIS_PA: +@@ -617,134 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co + } \ + } while (0) + +-int ssb_pcmcia_get_invariants(struct ssb_bus *bus, +- struct ssb_init_invariants *iv) ++static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev, ++ tuple_t *tuple, ++ void *priv) + { +- tuple_t tuple; +- int res; +- unsigned char buf[32]; ++ struct ssb_sprom *sprom = priv; ++ ++ if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID) ++ return -EINVAL; ++ if (tuple->TupleDataLen != ETH_ALEN + 2) ++ return -EINVAL; ++ if (tuple->TupleData[1] != ETH_ALEN) ++ return -EINVAL; ++ memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN); ++ return 0; ++}; ++ ++static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev, ++ tuple_t *tuple, ++ void *priv) ++{ ++ struct ssb_init_invariants *iv = priv; + struct ssb_sprom *sprom = &iv->sprom; + struct ssb_boardinfo *bi = &iv->boardinfo; + const char *error_description; + ++ GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1"); ++ switch (tuple->TupleData[0]) { ++ case SSB_PCMCIA_CIS_ID: ++ GOTO_ERROR_ON((tuple->TupleDataLen != 5) && ++ (tuple->TupleDataLen != 7), ++ "id tpl size"); ++ bi->vendor = tuple->TupleData[1] | ++ ((u16)tuple->TupleData[2] << 8); ++ break; ++ case SSB_PCMCIA_CIS_BOARDREV: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 2, ++ "boardrev tpl size"); ++ sprom->board_rev = tuple->TupleData[1]; ++ break; ++ case SSB_PCMCIA_CIS_PA: ++ GOTO_ERROR_ON((tuple->TupleDataLen != 9) && ++ (tuple->TupleDataLen != 10), ++ "pa tpl size"); ++ sprom->pa0b0 = tuple->TupleData[1] | ++ ((u16)tuple->TupleData[2] << 8); ++ sprom->pa0b1 = tuple->TupleData[3] | ++ ((u16)tuple->TupleData[4] << 8); ++ sprom->pa0b2 = tuple->TupleData[5] | ++ ((u16)tuple->TupleData[6] << 8); ++ sprom->itssi_a = tuple->TupleData[7]; ++ sprom->itssi_bg = tuple->TupleData[7]; ++ sprom->maxpwr_a = tuple->TupleData[8]; ++ sprom->maxpwr_bg = tuple->TupleData[8]; ++ break; ++ case SSB_PCMCIA_CIS_OEMNAME: ++ /* We ignore this. */ ++ break; ++ case SSB_PCMCIA_CIS_CCODE: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 2, ++ "ccode tpl size"); ++ sprom->country_code = tuple->TupleData[1]; ++ break; ++ case SSB_PCMCIA_CIS_ANTENNA: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 2, ++ "ant tpl size"); ++ sprom->ant_available_a = tuple->TupleData[1]; ++ sprom->ant_available_bg = tuple->TupleData[1]; ++ break; ++ case SSB_PCMCIA_CIS_ANTGAIN: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 2, ++ "antg tpl size"); ++ sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ break; ++ case SSB_PCMCIA_CIS_BFLAGS: ++ GOTO_ERROR_ON((tuple->TupleDataLen != 3) && ++ (tuple->TupleDataLen != 5), ++ "bfl tpl size"); ++ sprom->boardflags_lo = tuple->TupleData[1] | ++ ((u16)tuple->TupleData[2] << 8); ++ break; ++ case SSB_PCMCIA_CIS_LEDS: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 5, ++ "leds tpl size"); ++ sprom->gpio0 = tuple->TupleData[1]; ++ sprom->gpio1 = tuple->TupleData[2]; ++ sprom->gpio2 = tuple->TupleData[3]; ++ sprom->gpio3 = tuple->TupleData[4]; ++ break; ++ } ++ return -ENOSPC; /* continue with next entry */ ++ ++error: ++ ssb_printk(KERN_ERR PFX ++ "PCMCIA: Failed to fetch device invariants: %s\n", ++ error_description); ++ return -ENODEV; ++} ++ ++ ++int ssb_pcmcia_get_invariants(struct ssb_bus *bus, ++ struct ssb_init_invariants *iv) ++{ ++ struct ssb_sprom *sprom = &iv->sprom; ++ int res; ++ + memset(sprom, 0xFF, sizeof(*sprom)); + sprom->revision = 1; + sprom->boardflags_lo = 0; + sprom->boardflags_hi = 0; + + /* First fetch the MAC address. */ +- memset(&tuple, 0, sizeof(tuple)); +- tuple.DesiredTuple = CISTPL_FUNCE; +- tuple.TupleData = buf; +- tuple.TupleDataMax = sizeof(buf); +- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "MAC first tpl"); +- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "MAC first tpl data"); +- while (1) { +- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1"); +- if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID) +- break; +- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "MAC next tpl"); +- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "MAC next tpl data"); ++ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE, ++ ssb_pcmcia_get_mac, sprom); ++ if (res != 0) { ++ ssb_printk(KERN_ERR PFX ++ "PCMCIA: Failed to fetch MAC address\n"); ++ return -ENODEV; + } +- GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size"); +- memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN); + + /* Fetch the vendor specific tuples. */ +- memset(&tuple, 0, sizeof(tuple)); +- tuple.DesiredTuple = SSB_PCMCIA_CIS; +- tuple.TupleData = buf; +- tuple.TupleDataMax = sizeof(buf); +- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "VEN first tpl"); +- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "VEN first tpl data"); +- while (1) { +- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1"); +- switch (tuple.TupleData[0]) { +- case SSB_PCMCIA_CIS_ID: +- GOTO_ERROR_ON((tuple.TupleDataLen != 5) && +- (tuple.TupleDataLen != 7), +- "id tpl size"); +- bi->vendor = tuple.TupleData[1] | +- ((u16)tuple.TupleData[2] << 8); +- break; +- case SSB_PCMCIA_CIS_BOARDREV: +- GOTO_ERROR_ON(tuple.TupleDataLen != 2, +- "boardrev tpl size"); +- sprom->board_rev = tuple.TupleData[1]; +- break; +- case SSB_PCMCIA_CIS_PA: - GOTO_ERROR_ON(tuple.TupleDataLen != 9, -+ GOTO_ERROR_ON((tuple.TupleDataLen != 9) && -+ (tuple.TupleDataLen != 10), - "pa tpl size"); - sprom->pa0b0 = tuple.TupleData[1] | - ((u16)tuple.TupleData[2] << 8); -@@ -718,7 +719,8 @@ int ssb_pcmcia_get_invariants(struct ssb - sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1]; - break; - case SSB_PCMCIA_CIS_BFLAGS: +- "pa tpl size"); +- sprom->pa0b0 = tuple.TupleData[1] | +- ((u16)tuple.TupleData[2] << 8); +- sprom->pa0b1 = tuple.TupleData[3] | +- ((u16)tuple.TupleData[4] << 8); +- sprom->pa0b2 = tuple.TupleData[5] | +- ((u16)tuple.TupleData[6] << 8); +- sprom->itssi_a = tuple.TupleData[7]; +- sprom->itssi_bg = tuple.TupleData[7]; +- sprom->maxpwr_a = tuple.TupleData[8]; +- sprom->maxpwr_bg = tuple.TupleData[8]; +- break; +- case SSB_PCMCIA_CIS_OEMNAME: +- /* We ignore this. */ +- break; +- case SSB_PCMCIA_CIS_CCODE: +- GOTO_ERROR_ON(tuple.TupleDataLen != 2, +- "ccode tpl size"); +- sprom->country_code = tuple.TupleData[1]; +- break; +- case SSB_PCMCIA_CIS_ANTENNA: +- GOTO_ERROR_ON(tuple.TupleDataLen != 2, +- "ant tpl size"); +- sprom->ant_available_a = tuple.TupleData[1]; +- sprom->ant_available_bg = tuple.TupleData[1]; +- break; +- case SSB_PCMCIA_CIS_ANTGAIN: +- GOTO_ERROR_ON(tuple.TupleDataLen != 2, +- "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1]; +- break; +- case SSB_PCMCIA_CIS_BFLAGS: - GOTO_ERROR_ON(tuple.TupleDataLen != 3, -+ GOTO_ERROR_ON((tuple.TupleDataLen != 3) && -+ (tuple.TupleDataLen != 5), - "bfl tpl size"); - sprom->boardflags_lo = tuple.TupleData[1] | - ((u16)tuple.TupleData[2] << 8); +- "bfl tpl size"); +- sprom->boardflags_lo = tuple.TupleData[1] | +- ((u16)tuple.TupleData[2] << 8); +- break; +- case SSB_PCMCIA_CIS_LEDS: +- GOTO_ERROR_ON(tuple.TupleDataLen != 5, +- "leds tpl size"); +- sprom->gpio0 = tuple.TupleData[1]; +- sprom->gpio1 = tuple.TupleData[2]; +- sprom->gpio2 = tuple.TupleData[3]; +- sprom->gpio3 = tuple.TupleData[4]; +- break; +- } +- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); +- if (res == -ENOSPC) +- break; +- GOTO_ERROR_ON(res != 0, "VEN next tpl"); +- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "VEN next tpl data"); +- } ++ res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS, ++ ssb_pcmcia_do_get_invariants, sprom); ++ if ((res == 0) || (res == -ENOSPC)) ++ return 0; + +- return 0; +-error: + ssb_printk(KERN_ERR PFX +- "PCMCIA: Failed to fetch device invariants: %s\n", +- error_description); ++ "PCMCIA: Failed to fetch device invariants\n"); + return -ENODEV; + } + --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -27,24 +27,54 @@ struct ssb_sprom { @@ -355,9 +645,13 @@ }; /* board_vendor */ -@@ -240,8 +271,12 @@ struct ssb_bus { +@@ -238,20 +269,33 @@ struct ssb_bus { - /* The core in the basic address register window. (PCI bus only) */ + const struct ssb_bus_ops *ops; + +- /* The core in the basic address register window. (PCI bus only) */ ++ /* The core currently mapped into the MMIO window. ++ * Not valid on all host-buses. So don't use outside of SSB. */ struct ssb_device *mapped_device; - /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ - u8 mapped_pcmcia_seg; @@ -370,19 +664,38 @@ /* Lock for core and segment switching. * On PCMCIA-host busses this is used to protect the whole MMIO access. */ spinlock_t bar_lock; -@@ -252,6 +287,11 @@ struct ssb_bus { - struct pci_dev *host_pci; - /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ - struct pcmcia_device *host_pcmcia; -+ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ -+ struct sdio_func *host_sdio; + +- /* The bus this backplane is running on. */ ++ /* The host-bus this backplane is running on. */ + enum ssb_bustype bustype; +- /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ +- struct pci_dev *host_pci; +- /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ +- struct pcmcia_device *host_pcmcia; ++ /* Pointers to the host-bus. Check bustype before using any of these pointers. */ ++ union { ++ /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ ++ struct pci_dev *host_pci; ++ /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ ++ struct pcmcia_device *host_pcmcia; ++ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ ++ struct sdio_func *host_sdio; ++ }; + + /* See enum ssb_quirks */ + unsigned int quirks; #ifdef CONFIG_SSB_SPROM /* Mutex to protect the SPROM writing. */ -@@ -306,6 +346,11 @@ struct ssb_bus { +@@ -261,6 +305,7 @@ struct ssb_bus { + /* ID information about the Chip. */ + u16 chip_id; + u16 chip_rev; ++ u16 sprom_offset; + u16 sprom_size; /* number of words in sprom */ + u8 chip_package; + +@@ -306,6 +351,11 @@ struct ssb_bus { #endif /* DEBUG */ }; @@ -394,7 +707,7 @@ /* The initialization-invariants. */ struct ssb_init_invariants { /* Versioning information about the PCB. */ -@@ -336,6 +381,12 @@ extern int ssb_bus_pcmciabus_register(st +@@ -336,9 +386,18 @@ extern int ssb_bus_pcmciabus_register(st struct pcmcia_device *pcmcia_dev, unsigned long baseaddr); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -407,9 +720,58 @@ extern void ssb_bus_unregister(struct ssb_bus *bus); ++/* Does the device have an SPROM? */ ++extern bool ssb_is_sprom_available(struct ssb_bus *bus); ++ + /* Set a fallback SPROM. + * See kdoc at the function definition for complete documentation. */ + extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h -@@ -629,5 +629,15 @@ extern int ssb_chipco_serial_init(struct +@@ -53,6 +53,7 @@ + #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ + #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ + #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ ++#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */ + #define SSB_CHIPCO_CORECTL 0x0008 + #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ + #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +@@ -385,6 +386,7 @@ + + + /** Chip specific Chip-Status register contents. */ ++#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */ + #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 + #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ + #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ +@@ -398,6 +400,18 @@ + #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 + #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ + ++/** Macros to determine SPROM presence based on Chip-Status register. */ ++#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \ ++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_OTP_SEL) ++#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \ ++ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS) ++#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \ ++ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \ ++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_OTP_SEL)) ++ + + + /** Clockcontrol masks and values **/ +@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu { + struct ssb_chipcommon { + struct ssb_device *dev; + u32 capabilities; ++ u32 status; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct ssb_chipcommon_pmu pmu; +@@ -629,5 +644,15 @@ extern int ssb_chipco_serial_init(struct /* PMU support */ extern void ssb_pmu_init(struct ssb_chipcommon *cc); @@ -436,27 +798,289 @@ */ #define SSB_SPROMSIZE_WORDS 64 #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) -@@ -327,8 +327,11 @@ +@@ -170,26 +170,27 @@ + #define SSB_SPROMSIZE_WORDS_R4 220 + #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) + #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) +-#define SSB_SPROM_BASE 0x1000 +-#define SSB_SPROM_REVISION 0x107E ++#define SSB_SPROM_BASE1 0x1000 ++#define SSB_SPROM_BASE31 0x0800 ++#define SSB_SPROM_REVISION 0x007E + #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ + #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ + #define SSB_SPROM_REVISION_CRC_SHIFT 8 + + /* SPROM Revision 1 */ +-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */ +-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */ +-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */ +-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */ +-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */ +-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */ +-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */ ++#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */ ++#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */ ++#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */ ++#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */ ++#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */ ++#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */ ++#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */ + #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ + #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ + #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM1_BINF 0x105C /* Board info */ ++#define SSB_SPROM1_BINF 0x005C /* Board info */ + #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ + #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ + #define SSB_SPROM1_BINF_CCODE_SHIFT 8 +@@ -197,63 +198,63 @@ + #define SSB_SPROM1_BINF_ANTBG_SHIFT 12 + #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ + #define SSB_SPROM1_BINF_ANTA_SHIFT 14 +-#define SSB_SPROM1_PA0B0 0x105E +-#define SSB_SPROM1_PA0B1 0x1060 +-#define SSB_SPROM1_PA0B2 0x1062 +-#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */ ++#define SSB_SPROM1_PA0B0 0x005E ++#define SSB_SPROM1_PA0B1 0x0060 ++#define SSB_SPROM1_PA0B2 0x0062 ++#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */ + #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */ + #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */ + #define SSB_SPROM1_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */ ++#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */ + #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM1_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */ ++#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */ + #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */ + #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */ + #define SSB_SPROM1_MAXPWR_A_SHIFT 8 +-#define SSB_SPROM1_PA1B0 0x106A +-#define SSB_SPROM1_PA1B1 0x106C +-#define SSB_SPROM1_PA1B2 0x106E +-#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */ ++#define SSB_SPROM1_PA1B0 0x006A ++#define SSB_SPROM1_PA1B1 0x006C ++#define SSB_SPROM1_PA1B2 0x006E ++#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */ + #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/ + #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_ITSSI_A_SHIFT 8 +-#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */ ++#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */ + #define SSB_SPROM1_AGAIN_BG_SHIFT 0 + #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_AGAIN_A_SHIFT 8 + + /* SPROM Revision 2 (inherits from rev 1) */ +-#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */ +-#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */ ++#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ ++#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */ + #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */ + #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */ + #define SSB_SPROM2_MAXP_A_LO_SHIFT 8 +-#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */ ++#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */ + #define SSB_SPROM2_OPO_VALUE 0x00FF + #define SSB_SPROM2_OPO_UNUSED 0xFF00 +-#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */ ++#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */ + + /* SPROM Revision 3 (inherits most data from rev 2) */ +-#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ +-#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ + #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */ + #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8 + #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */ + #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16 +-#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */ ++#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */ ++#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */ + #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ + #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ + #define SSB_SPROM3_CCKPO_2M_SHIFT 4 +@@ -264,104 +265,156 @@ + #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + + /* SPROM Revision 4 */ +-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ +-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ ++#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ ++#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ ++#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */ ++#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ ++#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM4_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM4_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */ + #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ + #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */ +-#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */ +-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 +-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 +-#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ ++#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 ++#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 ++#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ + #define SSB_SPROM4_AGAIN0_SHIFT 0 + #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */ + #define SSB_SPROM4_AGAIN1_SHIFT 8 +-#define SSB_SPROM4_AGAIN23 0x1060 ++#define SSB_SPROM4_AGAIN23 0x0060 + #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */ + #define SSB_SPROM4_AGAIN2_SHIFT 0 + #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM4_AGAIN3_SHIFT 8 +-#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ +-#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ ++#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ + #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ + #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ + #define SSB_SPROM4_ITSSI_BG_SHIFT 8 +-#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */ ++#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */ + #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ + #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ + #define SSB_SPROM4_ITSSI_A_SHIFT 8 +-#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */ +-#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ +-#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ +-#define SSB_SPROM4_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */ +-#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ +-#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ +-#define SSB_SPROM4_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */ +-#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */ +-#define SSB_SPROM4_PA0B2 0x1086 +-#define SSB_SPROM4_PA1B0 0x108E +-#define SSB_SPROM4_PA1B1 0x1090 +-#define SSB_SPROM4_PA1B2 0x1092 ++#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */ ++#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */ ++#define SSB_SPROM4_PA0B2 0x0086 ++#define SSB_SPROM4_PA1B0 0x008E ++#define SSB_SPROM4_PA1B1 0x0090 ++#define SSB_SPROM4_PA1B2 0x0092 + + /* SPROM Revision 5 (inherits most data from rev 4) */ +-#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ +-#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ +-#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ +-#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ +-#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ ++#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */ ++#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */ ++#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ ++#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ + #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ + #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ + #define SSB_SPROM5_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */ + #define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ #define SSB_SPROM5_GPIOB_P3_SHIFT 8 /* SPROM Revision 8 */ -#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */ -#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */ -+#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ -+#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ -+#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ -+#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ -+#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ - #define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ - #define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ - #define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ -@@ -354,14 +357,63 @@ - #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ - #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ - #define SSB_SPROM8_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ +-#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ +-#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ +-#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ +-#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +-#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ +-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 +-#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */ ++#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */ ++#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */ ++#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */ ++#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */ ++#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */ ++#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */ ++#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM8_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM8_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ ++#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 ++#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 ++#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ + #define SSB_SPROM8_AGAIN0_SHIFT 0 + #define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */ + #define SSB_SPROM8_AGAIN1_SHIFT 8 +-#define SSB_SPROM8_AGAIN23 0x10A0 ++#define SSB_SPROM8_AGAIN23 0x00A0 + #define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */ + #define SSB_SPROM8_AGAIN2_SHIFT 0 + #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM8_AGAIN3_SHIFT 8 +-#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */ +-#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ +-#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ +-#define SSB_SPROM8_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */ +-#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ +-#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ +-#define SSB_SPROM8_GPIOB_P3_SHIFT 8 -#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */ -#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ -+#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ ++#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ +#define SSB_SPROM8_RSSISMF2G 0x000F +#define SSB_SPROM8_RSSISMC2G 0x00F0 +#define SSB_SPROM8_RSSISMC2G_SHIFT 4 @@ -464,7 +1088,7 @@ +#define SSB_SPROM8_RSSISAV2G_SHIFT 8 +#define SSB_SPROM8_BXA2G 0x1800 +#define SSB_SPROM8_BXA2G_SHIFT 11 -+#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ ++#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */ +#define SSB_SPROM8_RSSISMF5G 0x000F +#define SSB_SPROM8_RSSISMC5G 0x00F0 +#define SSB_SPROM8_RSSISMC5G_SHIFT 4 @@ -472,64 +1096,75 @@ +#define SSB_SPROM8_RSSISAV5G_SHIFT 8 +#define SSB_SPROM8_BXA5G 0x1800 +#define SSB_SPROM8_BXA5G_SHIFT 11 -+#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ ++#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */ +#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ +#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ +#define SSB_SPROM8_TRI5G_SHIFT 8 -+#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ ++#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */ +#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ +#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ +#define SSB_SPROM8_TRI5GH_SHIFT 8 -+#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ ++#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ +#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ +#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ +#define SSB_SPROM8_RXPO5G_SHIFT 8 -+#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ ++#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ #define SSB_SPROM8_ITSSI_BG_SHIFT 8 -#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */ -#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ -+#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ -+#define SSB_SPROM8_PA0B1 0x10C4 -+#define SSB_SPROM8_PA0B2 0x10C6 -+#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ ++#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */ ++#define SSB_SPROM8_PA0B1 0x00C4 ++#define SSB_SPROM8_PA0B2 0x00C6 ++#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */ +#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ #define SSB_SPROM8_ITSSI_A_SHIFT 8 -+#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ ++#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */ +#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ +#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ +#define SSB_SPROM8_MAXP_AL_SHIFT 8 -+#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ -+#define SSB_SPROM8_PA1B1 0x10CE -+#define SSB_SPROM8_PA1B2 0x10D0 -+#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ -+#define SSB_SPROM8_PA1LOB1 0x10D4 -+#define SSB_SPROM8_PA1LOB2 0x10D6 -+#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ -+#define SSB_SPROM8_PA1HIB1 0x10DA -+#define SSB_SPROM8_PA1HIB2 0x10DC -+#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ -+#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ -+#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ -+#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ -+#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ ++#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */ ++#define SSB_SPROM8_PA1B1 0x00CE ++#define SSB_SPROM8_PA1B2 0x00D0 ++#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */ ++#define SSB_SPROM8_PA1LOB1 0x00D4 ++#define SSB_SPROM8_PA1LOB2 0x00D6 ++#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ ++#define SSB_SPROM8_PA1HIB1 0x00DA ++#define SSB_SPROM8_PA1HIB2 0x00DC ++#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ ++#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ /* Values for SSB_SPROM1_BINF_CCODE */ enum { --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c -@@ -175,6 +175,8 @@ static u32 scan_read32(struct ssb_bus *b +@@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid) + static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, + u16 offset) + { ++ u32 lo, hi; ++ + switch (bus->bustype) { + case SSB_BUSTYPE_SSB: + offset += current_coreidx * SSB_CORE_SIZE; +@@ -174,6 +176,10 @@ static u32 scan_read32(struct ssb_bus *b + offset -= 0x800; } else ssb_pcmcia_switch_segment(bus, 0); - break; ++ lo = readw(bus->mmio + offset); ++ hi = readw(bus->mmio + offset + 2); ++ return lo | (hi << 16); + default: -+ break; + break; } return readl(bus->mmio + offset); - } -@@ -188,6 +190,8 @@ static int scan_switchcore(struct ssb_bu +@@ -188,6 +194,8 @@ static int scan_switchcore(struct ssb_bu return ssb_pci_switch_coreidx(bus, coreidx); case SSB_BUSTYPE_PCMCIA: return ssb_pcmcia_switch_coreidx(bus, coreidx); @@ -538,7 +1173,7 @@ } return 0; } -@@ -206,6 +210,8 @@ void ssb_iounmap(struct ssb_bus *bus) +@@ -206,6 +214,8 @@ void ssb_iounmap(struct ssb_bus *bus) SSB_BUG_ON(1); /* Can't reach this code. */ #endif break; @@ -547,7 +1182,7 @@ } bus->mmio = NULL; bus->mapped_device = NULL; -@@ -230,6 +236,8 @@ static void __iomem *ssb_ioremap(struct +@@ -230,6 +240,8 @@ static void __iomem *ssb_ioremap(struct SSB_BUG_ON(1); /* Can't reach this code. */ #endif break; @@ -556,3 +1191,327 @@ } return mmio; +@@ -339,7 +351,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + dev->bus = bus; + dev->ops = bus->ops; + +- ssb_dprintk(KERN_INFO PFX ++ printk(KERN_DEBUG PFX + "Core %d found: %s " + "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n", + i, ssb_core_name(dev->id.coreid), +--- a/drivers/ssb/driver_chipcommon.c ++++ b/drivers/ssb/driver_chipcommon.c +@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip + { + if (!cc->dev) + return; /* We don't have a ChipCommon */ ++ if (cc->dev->id.revision >= 11) ++ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); + ssb_pmu_init(cc); + chipco_powercontrol_init(cc); + ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); +@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c + { + return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); + } ++EXPORT_SYMBOL(ssb_chipco_gpio_control); + + u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value) + { +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = { + + static inline u32 ssb_irqflag(struct ssb_device *dev) + { +- return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; ++ u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG); ++ if (tpsflag) ++ return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; ++ else ++ /* not irq supported */ ++ return 0x3f; ++} ++ ++static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag) ++{ ++ struct ssb_bus *bus = rdev->bus; ++ int i; ++ for (i = 0; i < bus->nr_devices; i++) { ++ struct ssb_device *dev; ++ dev = &(bus->devices[i]); ++ if (ssb_irqflag(dev) == irqflag) ++ return dev; ++ } ++ return NULL; + } + + /* Get the MIPS IRQ assignment for a specified device. + * If unassigned, 0 is returned. ++ * If disabled, 5 is returned. ++ * If not supported, 6 is returned. + */ + unsigned int ssb_mips_irq(struct ssb_device *dev) + { + struct ssb_bus *bus = dev->bus; ++ struct ssb_device *mdev = bus->mipscore.dev; + u32 irqflag; + u32 ipsflag; + u32 tmp; + unsigned int irq; + + irqflag = ssb_irqflag(dev); ++ if (irqflag == 0x3f) ++ return 6; + ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG); + for (irq = 1; irq <= 4; irq++) { + tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]); + if (tmp == irqflag) + break; + } +- if (irq == 5) +- irq = 0; ++ if (irq == 5) { ++ if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)) ++ irq = 0; ++ } + + return irq; + } +@@ -97,25 +122,56 @@ static void set_irq(struct ssb_device *d + struct ssb_device *mdev = bus->mipscore.dev; + u32 irqflag = ssb_irqflag(dev); + ++ BUG_ON(oldirq == 6); ++ + dev->irq = irq + 2; + +- ssb_dprintk(KERN_INFO PFX +- "set_irq: core 0x%04x, irq %d => %d\n", +- dev->id.coreid, oldirq, irq); + /* clear the old irq */ + if (oldirq == 0) + ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))); +- else ++ else if (oldirq != 5) + clear_irq(bus, oldirq); + + /* assign the new one */ + if (irq == 0) { + ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC))); + } else { ++ u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG); ++ if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) { ++ u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]; ++ struct ssb_device *olddev = find_device(dev, oldipsflag); ++ if (olddev) ++ set_irq(olddev, 0); ++ } + irqflag <<= ipsflag_irq_shift[irq]; +- irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]); ++ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]); + ssb_write32(mdev, SSB_IPSFLAG, irqflag); + } ++ ssb_dprintk(KERN_INFO PFX ++ "set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.coreid, oldirq+2, irq+2); ++} ++ ++static void print_irq(struct ssb_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ ssb_dprintk(KERN_INFO PFX ++ "core 0x%04x, irq :", dev->id.coreid); ++ for (i = 0; i <= 6; i++) { ++ ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" "); ++ } ++ ssb_dprintk("\n"); ++} ++ ++static void dump_irq(struct ssb_bus *bus) ++{ ++ int i; ++ for (i = 0; i < bus->nr_devices; i++) { ++ struct ssb_device *dev; ++ dev = &(bus->devices[i]); ++ print_irq(dev, ssb_mips_irq(dev)); ++ } + } + + static void ssb_mips_serial_init(struct ssb_mipscore *mcore) +@@ -197,17 +253,23 @@ void ssb_mipscore_init(struct ssb_mipsco + + /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ + for (irq = 2, i = 0; i < bus->nr_devices; i++) { ++ int mips_irq; + dev = &(bus->devices[i]); +- dev->irq = ssb_mips_irq(dev) + 2; ++ mips_irq = ssb_mips_irq(dev); ++ if (mips_irq > 4) ++ dev->irq = 0; ++ else ++ dev->irq = mips_irq + 2; ++ if (dev->irq > 5) ++ continue; + switch (dev->id.coreid) { + case SSB_DEV_USB11_HOST: + /* shouldn't need a separate irq line for non-4710, most of them have a proper + * external usb controller on the pci */ + if ((bus->chip_id == 0x4710) && (irq <= 4)) { + set_irq(dev, irq++); +- break; + } +- /* fallthrough */ ++ break; + case SSB_DEV_PCI: + case SSB_DEV_ETHERNET: + case SSB_DEV_ETHERNET_GBIT: +@@ -218,8 +280,14 @@ void ssb_mipscore_init(struct ssb_mipsco + set_irq(dev, irq++); + break; + } ++ /* fallthrough */ ++ case SSB_DEV_EXTIF: ++ set_irq(dev, 0); ++ break; + } + } ++ ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); ++ dump_irq(bus); + + ssb_mips_serial_init(mcore); + ssb_mips_flash_detect(mcore); +--- a/drivers/ssb/sprom.c ++++ b/drivers/ssb/sprom.c +@@ -13,6 +13,9 @@ + + #include "ssb_private.h" + ++#include ++#include ++ + + static const struct ssb_sprom *fallback_sprom; + +@@ -33,17 +36,27 @@ static int sprom2hex(const u16 *sprom, c + static int hex2sprom(u16 *sprom, const char *dump, size_t len, + size_t sprom_size_words) + { +- char tmp[5] = { 0 }; +- int cnt = 0; ++ char c, tmp[5] = { 0 }; ++ int err, cnt = 0; + unsigned long parsed; + +- if (len < sprom_size_words * 2) ++ /* Strip whitespace at the end. */ ++ while (len) { ++ c = dump[len - 1]; ++ if (!isspace(c) && c != '\0') ++ break; ++ len--; ++ } ++ /* Length must match exactly. */ ++ if (len != sprom_size_words * 4) + return -EINVAL; + + while (cnt < sprom_size_words) { + memcpy(tmp, dump, 4); + dump += 4; +- parsed = simple_strtoul(tmp, NULL, 16); ++ err = strict_strtoul(tmp, 16, &parsed); ++ if (err) ++ return err; + sprom[cnt++] = swab16((u16)parsed); + } + +@@ -90,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_ + u16 *sprom; + int res = 0, err = -ENOMEM; + size_t sprom_size_words = bus->sprom_size; ++ struct ssb_freeze_context freeze; + + sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL); + if (!sprom) +@@ -111,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_ + err = -ERESTARTSYS; + if (mutex_lock_interruptible(&bus->sprom_mutex)) + goto out_kfree; +- err = ssb_devices_freeze(bus); +- if (err == -EOPNOTSUPP) { +- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. " +- "No suspend support. Is CONFIG_PM enabled?\n"); +- goto out_unlock; +- } ++ err = ssb_devices_freeze(bus, &freeze); + if (err) { + ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n"); + goto out_unlock; + } + res = sprom_write(bus, sprom); +- err = ssb_devices_thaw(bus); ++ err = ssb_devices_thaw(&freeze); + if (err) + ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); + out_unlock: +@@ -167,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback + { + return fallback_sprom; + } ++ ++/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ ++bool ssb_is_sprom_available(struct ssb_bus *bus) ++{ ++ /* status register only exists on chipcomon rev >= 11 and we need check ++ for >= 31 only */ ++ /* this routine differs from specs as we do not access SPROM directly ++ on PCMCIA */ ++ if (bus->bustype == SSB_BUSTYPE_PCI && ++ bus->chipco.dev->id.revision >= 31) ++ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; ++ ++ return true; ++} +--- a/drivers/ssb/ssb_private.h ++++ b/drivers/ssb/ssb_private.h +@@ -136,19 +136,27 @@ extern const struct ssb_sprom *ssb_get_f + + /* core.c */ + extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m); +-extern int ssb_devices_freeze(struct ssb_bus *bus); +-extern int ssb_devices_thaw(struct ssb_bus *bus); + extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); + int ssb_for_each_bus_call(unsigned long data, + int (*func)(struct ssb_bus *bus, unsigned long data)); + extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev); + ++struct ssb_freeze_context { ++ /* Pointer to the bus */ ++ struct ssb_bus *bus; ++ /* Boolean list to indicate whether a device is frozen on this bus. */ ++ bool device_frozen[SSB_MAX_NR_CORES]; ++}; ++extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx); ++extern int ssb_devices_thaw(struct ssb_freeze_context *ctx); ++ ++ + + /* b43_pci_bridge.c */ + #ifdef CONFIG_SSB_B43_PCI_BRIDGE + extern int __init b43_pci_ssb_bridge_init(void); + extern void __exit b43_pci_ssb_bridge_exit(void); +-#else /* CONFIG_SSB_B43_PCI_BRIDGR */ ++#else /* CONFIG_SSB_B43_PCI_BRIDGE */ + static inline int b43_pci_ssb_bridge_init(void) + { + return 0; +@@ -156,6 +164,6 @@ static inline int b43_pci_ssb_bridge_ini + static inline void b43_pci_ssb_bridge_exit(void) + { + } +-#endif /* CONFIG_SSB_PCIHOST */ ++#endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + + #endif /* LINUX_SSB_PRIVATE_H_ */ diff --git a/target/linux/generic-2.6/patches-2.6.32/975-ssb_update.patch b/target/linux/generic-2.6/patches-2.6.32/975-ssb_update.patch new file mode 100644 index 0000000000..f48c58052f --- /dev/null +++ b/target/linux/generic-2.6/patches-2.6.32/975-ssb_update.patch @@ -0,0 +1,1231 @@ +--- a/drivers/ssb/driver_chipcommon.c ++++ b/drivers/ssb/driver_chipcommon.c +@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip + { + if (!cc->dev) + return; /* We don't have a ChipCommon */ ++ if (cc->dev->id.revision >= 11) ++ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); + ssb_pmu_init(cc); + chipco_powercontrol_init(cc); + ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); +@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c + { + return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); + } ++EXPORT_SYMBOL(ssb_chipco_gpio_control); + + u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value) + { +--- a/drivers/ssb/driver_chipcommon_pmu.c ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -332,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_ + case 0x5354: + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; ++ case 0x4322: ++ if (cc->pmu.rev == 2) { ++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A); ++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0); ++ } ++ break; + default: + ssb_printk(KERN_ERR PFX + "ERROR: PLL init unknown for device %04X\n", +@@ -417,6 +423,7 @@ static void ssb_pmu_resources_init(struc + + switch (bus->chip_id) { + case 0x4312: ++ case 0x4322: + /* We keep the default settings: + * min_msk = 0xCBB + * max_msk = 0x7FFFF +--- a/drivers/ssb/driver_gige.c ++++ b/drivers/ssb/driver_gige.c +@@ -12,6 +12,7 @@ + #include + #include + #include ++#include + + + /* +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco + set_irq(dev, irq++); + } + break; +- /* fallthrough */ + case SSB_DEV_PCI: + case SSB_DEV_ETHERNET: + case SSB_DEV_ETHERNET_GBIT: +@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco + set_irq(dev, irq++); + break; + } ++ /* fallthrough */ ++ case SSB_DEV_EXTIF: ++ set_irq(dev, 0); ++ break; + } + } + ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore + .pci_ops = &ssb_pcicore_pciops, + .io_resource = &ssb_pcicore_io_resource, + .mem_resource = &ssb_pcicore_mem_resource, +- .mem_offset = 0x24000000, + }; + +-static u32 ssb_pcicore_pcibus_iobase = 0x100; +-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; +- + /* This function is called when doing a pci_enable_device(). + * We must first check if the device is a device on the PCI-core bridge. */ + int ssb_pcicore_plat_dev_init(struct pci_dev *d) + { +- struct resource *res; +- int pos, size; +- u32 *base; +- + if (d->bus->ops != &ssb_pcicore_pciops) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; +@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci + ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", + pci_name(d)); + +- /* Fix up resource bases */ +- for (pos = 0; pos < 6; pos++) { +- res = &d->resource[pos]; +- if (res->flags & IORESOURCE_IO) +- base = &ssb_pcicore_pcibus_iobase; +- else +- base = &ssb_pcicore_pcibus_membase; +- res->flags |= IORESOURCE_PCI_FIXED; +- if (res->end) { +- size = res->end - res->start + 1; +- if (*base & (size - 1)) +- *base = (*base + size) & ~(size - 1); +- res->start = *base; +- res->end = res->start + size - 1; +- *base += size; +- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); +- } +- /* Fix up PCI bridge BAR0 only */ +- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) +- break; +- } + /* Fix up interrupt lines */ + d->irq = ssb_mips_irq(extpci_core->dev) + 2; + pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); +@@ -551,13 +522,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc + might_sleep_if(pdev->id.coreid != SSB_DEV_PCI); + + /* Enable interrupts for this device. */ +- if (bus->host_pci && +- ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) { ++ if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) { + u32 coremask; + + /* Calculate the "coremask" for the device. */ + coremask = (1 << dev->core_index); + ++ SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI); + err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp); + if (err) + goto out; +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -18,6 +18,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -140,6 +141,19 @@ static void ssb_device_put(struct ssb_de + put_device(dev->dev); + } + ++static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) ++{ ++ if (drv) ++ get_driver(&drv->drv); ++ return drv; ++} ++ ++static inline void ssb_driver_put(struct ssb_driver *drv) ++{ ++ if (drv) ++ put_driver(&drv->drv); ++} ++ + static int ssb_device_resume(struct device *dev) + { + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); +@@ -210,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) + EXPORT_SYMBOL(ssb_bus_suspend); + + #ifdef CONFIG_SSB_SPROM +-int ssb_devices_freeze(struct ssb_bus *bus) ++/** ssb_devices_freeze - Freeze all devices on the bus. ++ * ++ * After freezing no device driver will be handling a device ++ * on this bus anymore. ssb_devices_thaw() must be called after ++ * a successful freeze to reactivate the devices. ++ * ++ * @bus: The bus. ++ * @ctx: Context structure. Pass this to ssb_devices_thaw(). ++ */ ++int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx) + { +- struct ssb_device *dev; +- struct ssb_driver *drv; +- int err = 0; +- int i; +- pm_message_t state = PMSG_FREEZE; ++ struct ssb_device *sdev; ++ struct ssb_driver *sdrv; ++ unsigned int i; ++ ++ memset(ctx, 0, sizeof(*ctx)); ++ ctx->bus = bus; ++ SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen)); + +- /* First check that we are capable to freeze all devices. */ + for (i = 0; i < bus->nr_devices; i++) { +- dev = &(bus->devices[i]); +- if (!dev->dev || +- !dev->dev->driver || +- !device_is_registered(dev->dev)) +- continue; +- drv = drv_to_ssb_drv(dev->dev->driver); +- if (!drv) ++ sdev = ssb_device_get(&bus->devices[i]); ++ ++ if (!sdev->dev || !sdev->dev->driver || ++ !device_is_registered(sdev->dev)) { ++ ssb_device_put(sdev); + continue; +- if (!drv->suspend) { +- /* Nope, can't suspend this one. */ +- return -EOPNOTSUPP; + } +- } +- /* Now suspend all devices */ +- for (i = 0; i < bus->nr_devices; i++) { +- dev = &(bus->devices[i]); +- if (!dev->dev || +- !dev->dev->driver || +- !device_is_registered(dev->dev)) ++ sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); ++ if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { ++ ssb_device_put(sdev); + continue; +- drv = drv_to_ssb_drv(dev->dev->driver); +- if (!drv) +- continue; +- err = drv->suspend(dev, state); +- if (err) { +- ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n", +- dev_name(dev->dev)); +- goto err_unwind; + } ++ sdrv->remove(sdev); ++ ctx->device_frozen[i] = 1; + } + + return 0; +-err_unwind: +- for (i--; i >= 0; i--) { +- dev = &(bus->devices[i]); +- if (!dev->dev || +- !dev->dev->driver || +- !device_is_registered(dev->dev)) +- continue; +- drv = drv_to_ssb_drv(dev->dev->driver); +- if (!drv) +- continue; +- if (drv->resume) +- drv->resume(dev); +- } +- return err; + } + +-int ssb_devices_thaw(struct ssb_bus *bus) ++/** ssb_devices_thaw - Unfreeze all devices on the bus. ++ * ++ * This will re-attach the device drivers and re-init the devices. ++ * ++ * @ctx: The context structure from ssb_devices_freeze() ++ */ ++int ssb_devices_thaw(struct ssb_freeze_context *ctx) + { +- struct ssb_device *dev; +- struct ssb_driver *drv; +- int err; +- int i; ++ struct ssb_bus *bus = ctx->bus; ++ struct ssb_device *sdev; ++ struct ssb_driver *sdrv; ++ unsigned int i; ++ int err, result = 0; + + for (i = 0; i < bus->nr_devices; i++) { +- dev = &(bus->devices[i]); +- if (!dev->dev || +- !dev->dev->driver || +- !device_is_registered(dev->dev)) ++ if (!ctx->device_frozen[i]) + continue; +- drv = drv_to_ssb_drv(dev->dev->driver); +- if (!drv) ++ sdev = &bus->devices[i]; ++ ++ if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver)) + continue; +- if (SSB_WARN_ON(!drv->resume)) ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv || !sdrv->probe)) + continue; +- err = drv->resume(dev); ++ ++ err = sdrv->probe(sdev, &sdev->id); + if (err) { + ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n", +- dev_name(dev->dev)); ++ dev_name(sdev->dev)); ++ result = err; + } ++ ssb_driver_put(sdrv); ++ ssb_device_put(sdev); + } + +- return 0; ++ return result; + } + #endif /* CONFIG_SSB_SPROM */ + +@@ -490,8 +495,7 @@ static int ssb_devices_register(struct s + #endif + break; + case SSB_BUSTYPE_SDIO: +-#ifdef CONFIG_SSB_SDIO +- sdev->irq = bus->host_sdio->dev.irq; ++#ifdef CONFIG_SSB_SDIOHOST + dev->parent = &bus->host_sdio->dev; + #endif + break; +@@ -830,6 +834,9 @@ int ssb_bus_pcibus_register(struct ssb_b + if (!err) { + ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " + "PCI device %s\n", dev_name(&host_pci->dev)); ++ } else { ++ ssb_printk(KERN_ERR PFX "Failed to register PCI version" ++ " of SSB with error %d\n", err); + } + + return err; +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -17,6 +17,7 @@ + + #include + #include ++#include + #include + #include + +@@ -167,7 +168,7 @@ err_pci: + } + + /* Get the word-offset for a SSB_SPROM_XXX define. */ +-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) ++#define SPOFF(offset) ((offset) / sizeof(u16)) + /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ + #define SPEX16(_outvar, _offset, _mask, _shift) \ + out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) +@@ -253,7 +254,7 @@ static int sprom_do_read(struct ssb_bus + int i; + + for (i = 0; i < bus->sprom_size; i++) +- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2)); ++ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2)); + + return 0; + } +@@ -284,7 +285,7 @@ static int sprom_do_write(struct ssb_bus + ssb_printk("75%%"); + else if (i % 2) + ssb_printk("."); +- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2)); ++ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); + mmiowb(); + msleep(20); + } +@@ -620,6 +621,14 @@ static int ssb_pci_sprom_get(struct ssb_ + int err = -ENOMEM; + u16 *buf; + ++ if (!ssb_is_sprom_available(bus)) { ++ ssb_printk(KERN_ERR PFX "No SPROM available!\n"); ++ return -ENODEV; ++ } ++ ++ bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ? ++ SSB_SPROM_BASE1 : SSB_SPROM_BASE31; ++ + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); + if (!buf) + goto out; +--- a/drivers/ssb/pcihost_wrapper.c ++++ b/drivers/ssb/pcihost_wrapper.c +@@ -12,6 +12,7 @@ + */ + + #include ++#include + #include + + +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co + } \ + } while (0) + +-int ssb_pcmcia_get_invariants(struct ssb_bus *bus, +- struct ssb_init_invariants *iv) ++static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev, ++ tuple_t *tuple, ++ void *priv) ++{ ++ struct ssb_sprom *sprom = priv; ++ ++ if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID) ++ return -EINVAL; ++ if (tuple->TupleDataLen != ETH_ALEN + 2) ++ return -EINVAL; ++ if (tuple->TupleData[1] != ETH_ALEN) ++ return -EINVAL; ++ memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN); ++ return 0; ++}; ++ ++static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev, ++ tuple_t *tuple, ++ void *priv) + { +- tuple_t tuple; +- int res; +- unsigned char buf[32]; ++ struct ssb_init_invariants *iv = priv; + struct ssb_sprom *sprom = &iv->sprom; + struct ssb_boardinfo *bi = &iv->boardinfo; + const char *error_description; + ++ GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1"); ++ switch (tuple->TupleData[0]) { ++ case SSB_PCMCIA_CIS_ID: ++ GOTO_ERROR_ON((tuple->TupleDataLen != 5) && ++ (tuple->TupleDataLen != 7), ++ "id tpl size"); ++ bi->vendor = tuple->TupleData[1] | ++ ((u16)tuple->TupleData[2] << 8); ++ break; ++ case SSB_PCMCIA_CIS_BOARDREV: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 2, ++ "boardrev tpl size"); ++ sprom->board_rev = tuple->TupleData[1]; ++ break; ++ case SSB_PCMCIA_CIS_PA: ++ GOTO_ERROR_ON((tuple->TupleDataLen != 9) && ++ (tuple->TupleDataLen != 10), ++ "pa tpl size"); ++ sprom->pa0b0 = tuple->TupleData[1] | ++ ((u16)tuple->TupleData[2] << 8); ++ sprom->pa0b1 = tuple->TupleData[3] | ++ ((u16)tuple->TupleData[4] << 8); ++ sprom->pa0b2 = tuple->TupleData[5] | ++ ((u16)tuple->TupleData[6] << 8); ++ sprom->itssi_a = tuple->TupleData[7]; ++ sprom->itssi_bg = tuple->TupleData[7]; ++ sprom->maxpwr_a = tuple->TupleData[8]; ++ sprom->maxpwr_bg = tuple->TupleData[8]; ++ break; ++ case SSB_PCMCIA_CIS_OEMNAME: ++ /* We ignore this. */ ++ break; ++ case SSB_PCMCIA_CIS_CCODE: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 2, ++ "ccode tpl size"); ++ sprom->country_code = tuple->TupleData[1]; ++ break; ++ case SSB_PCMCIA_CIS_ANTENNA: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 2, ++ "ant tpl size"); ++ sprom->ant_available_a = tuple->TupleData[1]; ++ sprom->ant_available_bg = tuple->TupleData[1]; ++ break; ++ case SSB_PCMCIA_CIS_ANTGAIN: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 2, ++ "antg tpl size"); ++ sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ break; ++ case SSB_PCMCIA_CIS_BFLAGS: ++ GOTO_ERROR_ON((tuple->TupleDataLen != 3) && ++ (tuple->TupleDataLen != 5), ++ "bfl tpl size"); ++ sprom->boardflags_lo = tuple->TupleData[1] | ++ ((u16)tuple->TupleData[2] << 8); ++ break; ++ case SSB_PCMCIA_CIS_LEDS: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 5, ++ "leds tpl size"); ++ sprom->gpio0 = tuple->TupleData[1]; ++ sprom->gpio1 = tuple->TupleData[2]; ++ sprom->gpio2 = tuple->TupleData[3]; ++ sprom->gpio3 = tuple->TupleData[4]; ++ break; ++ } ++ return -ENOSPC; /* continue with next entry */ ++ ++error: ++ ssb_printk(KERN_ERR PFX ++ "PCMCIA: Failed to fetch device invariants: %s\n", ++ error_description); ++ return -ENODEV; ++} ++ ++ ++int ssb_pcmcia_get_invariants(struct ssb_bus *bus, ++ struct ssb_init_invariants *iv) ++{ ++ struct ssb_sprom *sprom = &iv->sprom; ++ int res; ++ + memset(sprom, 0xFF, sizeof(*sprom)); + sprom->revision = 1; + sprom->boardflags_lo = 0; + sprom->boardflags_hi = 0; + + /* First fetch the MAC address. */ +- memset(&tuple, 0, sizeof(tuple)); +- tuple.DesiredTuple = CISTPL_FUNCE; +- tuple.TupleData = buf; +- tuple.TupleDataMax = sizeof(buf); +- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "MAC first tpl"); +- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "MAC first tpl data"); +- while (1) { +- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1"); +- if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID) +- break; +- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "MAC next tpl"); +- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "MAC next tpl data"); ++ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE, ++ ssb_pcmcia_get_mac, sprom); ++ if (res != 0) { ++ ssb_printk(KERN_ERR PFX ++ "PCMCIA: Failed to fetch MAC address\n"); ++ return -ENODEV; + } +- GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size"); +- memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN); + + /* Fetch the vendor specific tuples. */ +- memset(&tuple, 0, sizeof(tuple)); +- tuple.DesiredTuple = SSB_PCMCIA_CIS; +- tuple.TupleData = buf; +- tuple.TupleDataMax = sizeof(buf); +- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "VEN first tpl"); +- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "VEN first tpl data"); +- while (1) { +- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1"); +- switch (tuple.TupleData[0]) { +- case SSB_PCMCIA_CIS_ID: +- GOTO_ERROR_ON((tuple.TupleDataLen != 5) && +- (tuple.TupleDataLen != 7), +- "id tpl size"); +- bi->vendor = tuple.TupleData[1] | +- ((u16)tuple.TupleData[2] << 8); +- break; +- case SSB_PCMCIA_CIS_BOARDREV: +- GOTO_ERROR_ON(tuple.TupleDataLen != 2, +- "boardrev tpl size"); +- sprom->board_rev = tuple.TupleData[1]; +- break; +- case SSB_PCMCIA_CIS_PA: +- GOTO_ERROR_ON((tuple.TupleDataLen != 9) && +- (tuple.TupleDataLen != 10), +- "pa tpl size"); +- sprom->pa0b0 = tuple.TupleData[1] | +- ((u16)tuple.TupleData[2] << 8); +- sprom->pa0b1 = tuple.TupleData[3] | +- ((u16)tuple.TupleData[4] << 8); +- sprom->pa0b2 = tuple.TupleData[5] | +- ((u16)tuple.TupleData[6] << 8); +- sprom->itssi_a = tuple.TupleData[7]; +- sprom->itssi_bg = tuple.TupleData[7]; +- sprom->maxpwr_a = tuple.TupleData[8]; +- sprom->maxpwr_bg = tuple.TupleData[8]; +- break; +- case SSB_PCMCIA_CIS_OEMNAME: +- /* We ignore this. */ +- break; +- case SSB_PCMCIA_CIS_CCODE: +- GOTO_ERROR_ON(tuple.TupleDataLen != 2, +- "ccode tpl size"); +- sprom->country_code = tuple.TupleData[1]; +- break; +- case SSB_PCMCIA_CIS_ANTENNA: +- GOTO_ERROR_ON(tuple.TupleDataLen != 2, +- "ant tpl size"); +- sprom->ant_available_a = tuple.TupleData[1]; +- sprom->ant_available_bg = tuple.TupleData[1]; +- break; +- case SSB_PCMCIA_CIS_ANTGAIN: +- GOTO_ERROR_ON(tuple.TupleDataLen != 2, +- "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1]; +- break; +- case SSB_PCMCIA_CIS_BFLAGS: +- GOTO_ERROR_ON((tuple.TupleDataLen != 3) && +- (tuple.TupleDataLen != 5), +- "bfl tpl size"); +- sprom->boardflags_lo = tuple.TupleData[1] | +- ((u16)tuple.TupleData[2] << 8); +- break; +- case SSB_PCMCIA_CIS_LEDS: +- GOTO_ERROR_ON(tuple.TupleDataLen != 5, +- "leds tpl size"); +- sprom->gpio0 = tuple.TupleData[1]; +- sprom->gpio1 = tuple.TupleData[2]; +- sprom->gpio2 = tuple.TupleData[3]; +- sprom->gpio3 = tuple.TupleData[4]; +- break; +- } +- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); +- if (res == -ENOSPC) +- break; +- GOTO_ERROR_ON(res != 0, "VEN next tpl"); +- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "VEN next tpl data"); +- } ++ res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS, ++ ssb_pcmcia_do_get_invariants, sprom); ++ if ((res == 0) || (res == -ENOSPC)) ++ return 0; + +- return 0; +-error: + ssb_printk(KERN_ERR PFX +- "PCMCIA: Failed to fetch device invariants: %s\n", +- error_description); ++ "PCMCIA: Failed to fetch device invariants\n"); + return -ENODEV; + } + +--- a/drivers/ssb/scan.c ++++ b/drivers/ssb/scan.c +@@ -354,7 +354,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + dev->bus = bus; + dev->ops = bus->ops; + +- ssb_dprintk(KERN_INFO PFX ++ printk(KERN_DEBUG PFX + "Core %d found: %s " + "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n", + i, ssb_core_name(dev->id.coreid), +--- a/drivers/ssb/sprom.c ++++ b/drivers/ssb/sprom.c +@@ -14,6 +14,7 @@ + #include "ssb_private.h" + + #include ++#include + + + static const struct ssb_sprom *fallback_sprom; +@@ -102,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_ + u16 *sprom; + int res = 0, err = -ENOMEM; + size_t sprom_size_words = bus->sprom_size; ++ struct ssb_freeze_context freeze; + + sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL); + if (!sprom) +@@ -123,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_ + err = -ERESTARTSYS; + if (mutex_lock_interruptible(&bus->sprom_mutex)) + goto out_kfree; +- err = ssb_devices_freeze(bus); +- if (err == -EOPNOTSUPP) { +- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. " +- "No suspend support. Is CONFIG_PM enabled?\n"); +- goto out_unlock; +- } ++ err = ssb_devices_freeze(bus, &freeze); + if (err) { + ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n"); + goto out_unlock; + } + res = sprom_write(bus, sprom); +- err = ssb_devices_thaw(bus); ++ err = ssb_devices_thaw(&freeze); + if (err) + ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); + out_unlock: +@@ -179,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback + { + return fallback_sprom; + } ++ ++/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ ++bool ssb_is_sprom_available(struct ssb_bus *bus) ++{ ++ /* status register only exists on chipcomon rev >= 11 and we need check ++ for >= 31 only */ ++ /* this routine differs from specs as we do not access SPROM directly ++ on PCMCIA */ ++ if (bus->bustype == SSB_BUSTYPE_PCI && ++ bus->chipco.dev->id.revision >= 31) ++ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; ++ ++ return true; ++} +--- a/drivers/ssb/ssb_private.h ++++ b/drivers/ssb/ssb_private.h +@@ -176,19 +176,27 @@ extern const struct ssb_sprom *ssb_get_f + + /* core.c */ + extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m); +-extern int ssb_devices_freeze(struct ssb_bus *bus); +-extern int ssb_devices_thaw(struct ssb_bus *bus); + extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); + int ssb_for_each_bus_call(unsigned long data, + int (*func)(struct ssb_bus *bus, unsigned long data)); + extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev); + ++struct ssb_freeze_context { ++ /* Pointer to the bus */ ++ struct ssb_bus *bus; ++ /* Boolean list to indicate whether a device is frozen on this bus. */ ++ bool device_frozen[SSB_MAX_NR_CORES]; ++}; ++extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx); ++extern int ssb_devices_thaw(struct ssb_freeze_context *ctx); ++ ++ + + /* b43_pci_bridge.c */ + #ifdef CONFIG_SSB_B43_PCI_BRIDGE + extern int __init b43_pci_ssb_bridge_init(void); + extern void __exit b43_pci_ssb_bridge_exit(void); +-#else /* CONFIG_SSB_B43_PCI_BRIDGR */ ++#else /* CONFIG_SSB_B43_PCI_BRIDGE */ + static inline int b43_pci_ssb_bridge_init(void) + { + return 0; +@@ -196,6 +204,6 @@ static inline int b43_pci_ssb_bridge_ini + static inline void b43_pci_ssb_bridge_exit(void) + { + } +-#endif /* CONFIG_SSB_PCIHOST */ ++#endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + + #endif /* LINUX_SSB_PRIVATE_H_ */ +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -269,7 +269,8 @@ struct ssb_bus { + + const struct ssb_bus_ops *ops; + +- /* The core in the basic address register window. (PCI bus only) */ ++ /* The core currently mapped into the MMIO window. ++ * Not valid on all host-buses. So don't use outside of SSB. */ + struct ssb_device *mapped_device; + union { + /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ +@@ -281,14 +282,17 @@ struct ssb_bus { + * On PCMCIA-host busses this is used to protect the whole MMIO access. */ + spinlock_t bar_lock; + +- /* The bus this backplane is running on. */ ++ /* The host-bus this backplane is running on. */ + enum ssb_bustype bustype; +- /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ +- struct pci_dev *host_pci; +- /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ +- struct pcmcia_device *host_pcmcia; +- /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ +- struct sdio_func *host_sdio; ++ /* Pointers to the host-bus. Check bustype before using any of these pointers. */ ++ union { ++ /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ ++ struct pci_dev *host_pci; ++ /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ ++ struct pcmcia_device *host_pcmcia; ++ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ ++ struct sdio_func *host_sdio; ++ }; + + /* See enum ssb_quirks */ + unsigned int quirks; +@@ -301,6 +305,7 @@ struct ssb_bus { + /* ID information about the Chip. */ + u16 chip_id; + u16 chip_rev; ++ u16 sprom_offset; + u16 sprom_size; /* number of words in sprom */ + u8 chip_package; + +@@ -390,6 +395,9 @@ extern int ssb_bus_sdiobus_register(stru + + extern void ssb_bus_unregister(struct ssb_bus *bus); + ++/* Does the device have an SPROM? */ ++extern bool ssb_is_sprom_available(struct ssb_bus *bus); ++ + /* Set a fallback SPROM. + * See kdoc at the function definition for complete documentation. */ + extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -53,6 +53,7 @@ + #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ + #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ + #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ ++#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */ + #define SSB_CHIPCO_CORECTL 0x0008 + #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ + #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +@@ -385,6 +386,7 @@ + + + /** Chip specific Chip-Status register contents. */ ++#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */ + #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 + #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ + #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ +@@ -398,6 +400,18 @@ + #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 + #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ + ++/** Macros to determine SPROM presence based on Chip-Status register. */ ++#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \ ++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_OTP_SEL) ++#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \ ++ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS) ++#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \ ++ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \ ++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_OTP_SEL)) ++ + + + /** Clockcontrol masks and values **/ +@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu { + struct ssb_chipcommon { + struct ssb_device *dev; + u32 capabilities; ++ u32 status; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct ssb_chipcommon_pmu pmu; +--- a/include/linux/ssb/ssb_regs.h ++++ b/include/linux/ssb/ssb_regs.h +@@ -170,26 +170,27 @@ + #define SSB_SPROMSIZE_WORDS_R4 220 + #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) + #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) +-#define SSB_SPROM_BASE 0x1000 +-#define SSB_SPROM_REVISION 0x107E ++#define SSB_SPROM_BASE1 0x1000 ++#define SSB_SPROM_BASE31 0x0800 ++#define SSB_SPROM_REVISION 0x007E + #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ + #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ + #define SSB_SPROM_REVISION_CRC_SHIFT 8 + + /* SPROM Revision 1 */ +-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */ +-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */ +-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */ +-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */ +-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */ +-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */ +-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */ ++#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */ ++#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */ ++#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */ ++#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */ ++#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */ ++#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */ ++#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */ + #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ + #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ + #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM1_BINF 0x105C /* Board info */ ++#define SSB_SPROM1_BINF 0x005C /* Board info */ + #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ + #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ + #define SSB_SPROM1_BINF_CCODE_SHIFT 8 +@@ -197,63 +198,63 @@ + #define SSB_SPROM1_BINF_ANTBG_SHIFT 12 + #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ + #define SSB_SPROM1_BINF_ANTA_SHIFT 14 +-#define SSB_SPROM1_PA0B0 0x105E +-#define SSB_SPROM1_PA0B1 0x1060 +-#define SSB_SPROM1_PA0B2 0x1062 +-#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */ ++#define SSB_SPROM1_PA0B0 0x005E ++#define SSB_SPROM1_PA0B1 0x0060 ++#define SSB_SPROM1_PA0B2 0x0062 ++#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */ + #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */ + #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */ + #define SSB_SPROM1_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */ ++#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */ + #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM1_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */ ++#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */ + #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */ + #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */ + #define SSB_SPROM1_MAXPWR_A_SHIFT 8 +-#define SSB_SPROM1_PA1B0 0x106A +-#define SSB_SPROM1_PA1B1 0x106C +-#define SSB_SPROM1_PA1B2 0x106E +-#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */ ++#define SSB_SPROM1_PA1B0 0x006A ++#define SSB_SPROM1_PA1B1 0x006C ++#define SSB_SPROM1_PA1B2 0x006E ++#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */ + #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/ + #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_ITSSI_A_SHIFT 8 +-#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */ ++#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */ + #define SSB_SPROM1_AGAIN_BG_SHIFT 0 + #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_AGAIN_A_SHIFT 8 + + /* SPROM Revision 2 (inherits from rev 1) */ +-#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */ +-#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */ ++#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ ++#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */ + #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */ + #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */ + #define SSB_SPROM2_MAXP_A_LO_SHIFT 8 +-#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */ ++#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */ + #define SSB_SPROM2_OPO_VALUE 0x00FF + #define SSB_SPROM2_OPO_UNUSED 0xFF00 +-#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */ ++#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */ + + /* SPROM Revision 3 (inherits most data from rev 2) */ +-#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ +-#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ + #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */ + #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8 + #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */ + #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16 +-#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */ ++#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */ ++#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */ + #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ + #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ + #define SSB_SPROM3_CCKPO_2M_SHIFT 4 +@@ -264,100 +265,100 @@ + #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + + /* SPROM Revision 4 */ +-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ +-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ ++#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ ++#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ ++#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */ ++#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ ++#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM4_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM4_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */ + #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ + #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */ +-#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */ +-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 +-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 +-#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ ++#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 ++#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 ++#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ + #define SSB_SPROM4_AGAIN0_SHIFT 0 + #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */ + #define SSB_SPROM4_AGAIN1_SHIFT 8 +-#define SSB_SPROM4_AGAIN23 0x1060 ++#define SSB_SPROM4_AGAIN23 0x0060 + #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */ + #define SSB_SPROM4_AGAIN2_SHIFT 0 + #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM4_AGAIN3_SHIFT 8 +-#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ +-#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ ++#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ + #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ + #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ + #define SSB_SPROM4_ITSSI_BG_SHIFT 8 +-#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */ ++#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */ + #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ + #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ + #define SSB_SPROM4_ITSSI_A_SHIFT 8 +-#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */ +-#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ +-#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ +-#define SSB_SPROM4_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */ +-#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ +-#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ +-#define SSB_SPROM4_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */ +-#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */ +-#define SSB_SPROM4_PA0B2 0x1086 +-#define SSB_SPROM4_PA1B0 0x108E +-#define SSB_SPROM4_PA1B1 0x1090 +-#define SSB_SPROM4_PA1B2 0x1092 ++#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */ ++#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */ ++#define SSB_SPROM4_PA0B2 0x0086 ++#define SSB_SPROM4_PA1B0 0x008E ++#define SSB_SPROM4_PA1B1 0x0090 ++#define SSB_SPROM4_PA1B2 0x0092 + + /* SPROM Revision 5 (inherits most data from rev 4) */ +-#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ +-#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ +-#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ +-#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ +-#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ ++#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */ ++#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */ ++#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ ++#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ + #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ + #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ + #define SSB_SPROM5_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */ + #define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM5_GPIOB_P3_SHIFT 8 + + /* SPROM Revision 8 */ +-#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ +-#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ +-#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ +-#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ +-#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ +-#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ +-#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ +-#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ +-#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ +-#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +-#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ +-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 +-#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */ ++#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */ ++#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */ ++#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */ ++#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */ ++#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */ ++#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */ ++#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM8_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM8_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ ++#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 ++#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 ++#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ + #define SSB_SPROM8_AGAIN0_SHIFT 0 + #define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */ + #define SSB_SPROM8_AGAIN1_SHIFT 8 +-#define SSB_SPROM8_AGAIN23 0x10A0 ++#define SSB_SPROM8_AGAIN23 0x00A0 + #define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */ + #define SSB_SPROM8_AGAIN2_SHIFT 0 + #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM8_AGAIN3_SHIFT 8 +-#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */ +-#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ +-#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ +-#define SSB_SPROM8_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */ +-#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ +-#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ +-#define SSB_SPROM8_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ ++#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ + #define SSB_SPROM8_RSSISMF2G 0x000F + #define SSB_SPROM8_RSSISMC2G 0x00F0 + #define SSB_SPROM8_RSSISMC2G_SHIFT 4 +@@ -365,7 +366,7 @@ + #define SSB_SPROM8_RSSISAV2G_SHIFT 8 + #define SSB_SPROM8_BXA2G 0x1800 + #define SSB_SPROM8_BXA2G_SHIFT 11 +-#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ ++#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */ + #define SSB_SPROM8_RSSISMF5G 0x000F + #define SSB_SPROM8_RSSISMC5G 0x00F0 + #define SSB_SPROM8_RSSISMC5G_SHIFT 4 +@@ -373,47 +374,47 @@ + #define SSB_SPROM8_RSSISAV5G_SHIFT 8 + #define SSB_SPROM8_BXA5G 0x1800 + #define SSB_SPROM8_BXA5G_SHIFT 11 +-#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ ++#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */ + #define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ + #define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ + #define SSB_SPROM8_TRI5G_SHIFT 8 +-#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ ++#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */ + #define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ + #define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ + #define SSB_SPROM8_TRI5GH_SHIFT 8 +-#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ ++#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ + #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ + #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ + #define SSB_SPROM8_RXPO5G_SHIFT 8 +-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ ++#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ + #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ + #define SSB_SPROM8_ITSSI_BG_SHIFT 8 +-#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ +-#define SSB_SPROM8_PA0B1 0x10C4 +-#define SSB_SPROM8_PA0B2 0x10C6 +-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ ++#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */ ++#define SSB_SPROM8_PA0B1 0x00C4 ++#define SSB_SPROM8_PA0B2 0x00C6 ++#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */ + #define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ + #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ + #define SSB_SPROM8_ITSSI_A_SHIFT 8 +-#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ ++#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */ + #define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ + #define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ + #define SSB_SPROM8_MAXP_AL_SHIFT 8 +-#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ +-#define SSB_SPROM8_PA1B1 0x10CE +-#define SSB_SPROM8_PA1B2 0x10D0 +-#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ +-#define SSB_SPROM8_PA1LOB1 0x10D4 +-#define SSB_SPROM8_PA1LOB2 0x10D6 +-#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ +-#define SSB_SPROM8_PA1HIB1 0x10DA +-#define SSB_SPROM8_PA1HIB2 0x10DC +-#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ +-#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ +-#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ +-#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ +-#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ ++#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */ ++#define SSB_SPROM8_PA1B1 0x00CE ++#define SSB_SPROM8_PA1B2 0x00D0 ++#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */ ++#define SSB_SPROM8_PA1LOB1 0x00D4 ++#define SSB_SPROM8_PA1LOB2 0x00D6 ++#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ ++#define SSB_SPROM8_PA1HIB1 0x00DA ++#define SSB_SPROM8_PA1HIB2 0x00DC ++#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ ++#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { diff --git a/target/linux/generic-2.6/patches-2.6.33/975-ssb_update.patch b/target/linux/generic-2.6/patches-2.6.33/975-ssb_update.patch new file mode 100644 index 0000000000..fbc8f517b0 --- /dev/null +++ b/target/linux/generic-2.6/patches-2.6.33/975-ssb_update.patch @@ -0,0 +1,644 @@ +--- a/drivers/ssb/driver_chipcommon.c ++++ b/drivers/ssb/driver_chipcommon.c +@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip + { + if (!cc->dev) + return; /* We don't have a ChipCommon */ ++ if (cc->dev->id.revision >= 11) ++ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); + ssb_pmu_init(cc); + chipco_powercontrol_init(cc); + ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); +@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c + { + return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); + } ++EXPORT_SYMBOL(ssb_chipco_gpio_control); + + u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value) + { +--- a/drivers/ssb/driver_chipcommon_pmu.c ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -332,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_ + case 0x5354: + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; ++ case 0x4322: ++ if (cc->pmu.rev == 2) { ++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A); ++ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0); ++ } ++ break; + default: + ssb_printk(KERN_ERR PFX + "ERROR: PLL init unknown for device %04X\n", +@@ -417,6 +423,7 @@ static void ssb_pmu_resources_init(struc + + switch (bus->chip_id) { + case 0x4312: ++ case 0x4322: + /* We keep the default settings: + * min_msk = 0xCBB + * max_msk = 0x7FFFF +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco + set_irq(dev, irq++); + } + break; +- /* fallthrough */ + case SSB_DEV_PCI: + case SSB_DEV_ETHERNET: + case SSB_DEV_ETHERNET_GBIT: +@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco + set_irq(dev, irq++); + break; + } ++ /* fallthrough */ ++ case SSB_DEV_EXTIF: ++ set_irq(dev, 0); ++ break; + } + } + ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore + .pci_ops = &ssb_pcicore_pciops, + .io_resource = &ssb_pcicore_io_resource, + .mem_resource = &ssb_pcicore_mem_resource, +- .mem_offset = 0x24000000, + }; + +-static u32 ssb_pcicore_pcibus_iobase = 0x100; +-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; +- + /* This function is called when doing a pci_enable_device(). + * We must first check if the device is a device on the PCI-core bridge. */ + int ssb_pcicore_plat_dev_init(struct pci_dev *d) + { +- struct resource *res; +- int pos, size; +- u32 *base; +- + if (d->bus->ops != &ssb_pcicore_pciops) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; +@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci + ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", + pci_name(d)); + +- /* Fix up resource bases */ +- for (pos = 0; pos < 6; pos++) { +- res = &d->resource[pos]; +- if (res->flags & IORESOURCE_IO) +- base = &ssb_pcicore_pcibus_iobase; +- else +- base = &ssb_pcicore_pcibus_membase; +- res->flags |= IORESOURCE_PCI_FIXED; +- if (res->end) { +- size = res->end - res->start + 1; +- if (*base & (size - 1)) +- *base = (*base + size) & ~(size - 1); +- res->start = *base; +- res->end = res->start + size - 1; +- *base += size; +- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); +- } +- /* Fix up PCI bridge BAR0 only */ +- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) +- break; +- } + /* Fix up interrupt lines */ + d->irq = ssb_mips_irq(extpci_core->dev) + 2; + pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -833,6 +833,9 @@ int ssb_bus_pcibus_register(struct ssb_b + if (!err) { + ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " + "PCI device %s\n", dev_name(&host_pci->dev)); ++ } else { ++ ssb_printk(KERN_ERR PFX "Failed to register PCI version" ++ " of SSB with error %d\n", err); + } + + return err; +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -167,7 +167,7 @@ err_pci: + } + + /* Get the word-offset for a SSB_SPROM_XXX define. */ +-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) ++#define SPOFF(offset) ((offset) / sizeof(u16)) + /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ + #define SPEX16(_outvar, _offset, _mask, _shift) \ + out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) +@@ -253,7 +253,7 @@ static int sprom_do_read(struct ssb_bus + int i; + + for (i = 0; i < bus->sprom_size; i++) +- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2)); ++ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2)); + + return 0; + } +@@ -284,7 +284,7 @@ static int sprom_do_write(struct ssb_bus + ssb_printk("75%%"); + else if (i % 2) + ssb_printk("."); +- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2)); ++ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); + mmiowb(); + msleep(20); + } +@@ -620,6 +620,14 @@ static int ssb_pci_sprom_get(struct ssb_ + int err = -ENOMEM; + u16 *buf; + ++ if (!ssb_is_sprom_available(bus)) { ++ ssb_printk(KERN_ERR PFX "No SPROM available!\n"); ++ return -ENODEV; ++ } ++ ++ bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ? ++ SSB_SPROM_BASE1 : SSB_SPROM_BASE31; ++ + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); + if (!buf) + goto out; +--- a/drivers/ssb/sprom.c ++++ b/drivers/ssb/sprom.c +@@ -175,3 +175,17 @@ const struct ssb_sprom *ssb_get_fallback + { + return fallback_sprom; + } ++ ++/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ ++bool ssb_is_sprom_available(struct ssb_bus *bus) ++{ ++ /* status register only exists on chipcomon rev >= 11 and we need check ++ for >= 31 only */ ++ /* this routine differs from specs as we do not access SPROM directly ++ on PCMCIA */ ++ if (bus->bustype == SSB_BUSTYPE_PCI && ++ bus->chipco.dev->id.revision >= 31) ++ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; ++ ++ return true; ++} +--- a/drivers/ssb/ssb_private.h ++++ b/drivers/ssb/ssb_private.h +@@ -196,7 +196,7 @@ extern int ssb_devices_thaw(struct ssb_f + #ifdef CONFIG_SSB_B43_PCI_BRIDGE + extern int __init b43_pci_ssb_bridge_init(void); + extern void __exit b43_pci_ssb_bridge_exit(void); +-#else /* CONFIG_SSB_B43_PCI_BRIDGR */ ++#else /* CONFIG_SSB_B43_PCI_BRIDGE */ + static inline int b43_pci_ssb_bridge_init(void) + { + return 0; +@@ -204,6 +204,6 @@ static inline int b43_pci_ssb_bridge_ini + static inline void b43_pci_ssb_bridge_exit(void) + { + } +-#endif /* CONFIG_SSB_PCIHOST */ ++#endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + + #endif /* LINUX_SSB_PRIVATE_H_ */ +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -305,6 +305,7 @@ struct ssb_bus { + /* ID information about the Chip. */ + u16 chip_id; + u16 chip_rev; ++ u16 sprom_offset; + u16 sprom_size; /* number of words in sprom */ + u8 chip_package; + +@@ -394,6 +395,9 @@ extern int ssb_bus_sdiobus_register(stru + + extern void ssb_bus_unregister(struct ssb_bus *bus); + ++/* Does the device have an SPROM? */ ++extern bool ssb_is_sprom_available(struct ssb_bus *bus); ++ + /* Set a fallback SPROM. + * See kdoc at the function definition for complete documentation. */ + extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -53,6 +53,7 @@ + #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ + #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ + #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ ++#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */ + #define SSB_CHIPCO_CORECTL 0x0008 + #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ + #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +@@ -385,6 +386,7 @@ + + + /** Chip specific Chip-Status register contents. */ ++#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */ + #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 + #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ + #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ +@@ -398,6 +400,18 @@ + #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 + #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ + ++/** Macros to determine SPROM presence based on Chip-Status register. */ ++#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \ ++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_OTP_SEL) ++#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \ ++ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS) ++#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \ ++ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \ ++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_OTP_SEL)) ++ + + + /** Clockcontrol masks and values **/ +@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu { + struct ssb_chipcommon { + struct ssb_device *dev; + u32 capabilities; ++ u32 status; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct ssb_chipcommon_pmu pmu; +--- a/include/linux/ssb/ssb_regs.h ++++ b/include/linux/ssb/ssb_regs.h +@@ -170,26 +170,27 @@ + #define SSB_SPROMSIZE_WORDS_R4 220 + #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) + #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) +-#define SSB_SPROM_BASE 0x1000 +-#define SSB_SPROM_REVISION 0x107E ++#define SSB_SPROM_BASE1 0x1000 ++#define SSB_SPROM_BASE31 0x0800 ++#define SSB_SPROM_REVISION 0x007E + #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ + #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ + #define SSB_SPROM_REVISION_CRC_SHIFT 8 + + /* SPROM Revision 1 */ +-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */ +-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */ +-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */ +-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */ +-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */ +-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */ +-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */ ++#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */ ++#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */ ++#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */ ++#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */ ++#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */ ++#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */ ++#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */ + #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ + #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ + #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM1_BINF 0x105C /* Board info */ ++#define SSB_SPROM1_BINF 0x005C /* Board info */ + #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ + #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ + #define SSB_SPROM1_BINF_CCODE_SHIFT 8 +@@ -197,63 +198,63 @@ + #define SSB_SPROM1_BINF_ANTBG_SHIFT 12 + #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ + #define SSB_SPROM1_BINF_ANTA_SHIFT 14 +-#define SSB_SPROM1_PA0B0 0x105E +-#define SSB_SPROM1_PA0B1 0x1060 +-#define SSB_SPROM1_PA0B2 0x1062 +-#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */ ++#define SSB_SPROM1_PA0B0 0x005E ++#define SSB_SPROM1_PA0B1 0x0060 ++#define SSB_SPROM1_PA0B2 0x0062 ++#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */ + #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */ + #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */ + #define SSB_SPROM1_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */ ++#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */ + #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM1_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */ ++#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */ + #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */ + #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */ + #define SSB_SPROM1_MAXPWR_A_SHIFT 8 +-#define SSB_SPROM1_PA1B0 0x106A +-#define SSB_SPROM1_PA1B1 0x106C +-#define SSB_SPROM1_PA1B2 0x106E +-#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */ ++#define SSB_SPROM1_PA1B0 0x006A ++#define SSB_SPROM1_PA1B1 0x006C ++#define SSB_SPROM1_PA1B2 0x006E ++#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */ + #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/ + #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_ITSSI_A_SHIFT 8 +-#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */ ++#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */ + #define SSB_SPROM1_AGAIN_BG_SHIFT 0 + #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_AGAIN_A_SHIFT 8 + + /* SPROM Revision 2 (inherits from rev 1) */ +-#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */ +-#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */ ++#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ ++#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */ + #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */ + #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */ + #define SSB_SPROM2_MAXP_A_LO_SHIFT 8 +-#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */ ++#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */ + #define SSB_SPROM2_OPO_VALUE 0x00FF + #define SSB_SPROM2_OPO_UNUSED 0xFF00 +-#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */ ++#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */ + + /* SPROM Revision 3 (inherits most data from rev 2) */ +-#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ +-#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ + #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */ + #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8 + #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */ + #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16 +-#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */ ++#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */ ++#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */ + #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ + #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ + #define SSB_SPROM3_CCKPO_2M_SHIFT 4 +@@ -264,100 +265,100 @@ + #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + + /* SPROM Revision 4 */ +-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ +-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ ++#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ ++#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ ++#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */ ++#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ ++#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM4_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM4_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */ + #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ + #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */ +-#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */ +-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 +-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 +-#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ ++#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 ++#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 ++#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ + #define SSB_SPROM4_AGAIN0_SHIFT 0 + #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */ + #define SSB_SPROM4_AGAIN1_SHIFT 8 +-#define SSB_SPROM4_AGAIN23 0x1060 ++#define SSB_SPROM4_AGAIN23 0x0060 + #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */ + #define SSB_SPROM4_AGAIN2_SHIFT 0 + #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM4_AGAIN3_SHIFT 8 +-#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ +-#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ ++#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ + #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ + #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ + #define SSB_SPROM4_ITSSI_BG_SHIFT 8 +-#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */ ++#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */ + #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ + #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ + #define SSB_SPROM4_ITSSI_A_SHIFT 8 +-#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */ +-#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ +-#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ +-#define SSB_SPROM4_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */ +-#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ +-#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ +-#define SSB_SPROM4_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */ +-#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */ +-#define SSB_SPROM4_PA0B2 0x1086 +-#define SSB_SPROM4_PA1B0 0x108E +-#define SSB_SPROM4_PA1B1 0x1090 +-#define SSB_SPROM4_PA1B2 0x1092 ++#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */ ++#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */ ++#define SSB_SPROM4_PA0B2 0x0086 ++#define SSB_SPROM4_PA1B0 0x008E ++#define SSB_SPROM4_PA1B1 0x0090 ++#define SSB_SPROM4_PA1B2 0x0092 + + /* SPROM Revision 5 (inherits most data from rev 4) */ +-#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ +-#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ +-#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ +-#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ +-#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ ++#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */ ++#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */ ++#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ ++#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ + #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ + #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ + #define SSB_SPROM5_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */ + #define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM5_GPIOB_P3_SHIFT 8 + + /* SPROM Revision 8 */ +-#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ +-#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ +-#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ +-#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ +-#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ +-#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ +-#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ +-#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ +-#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ +-#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +-#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ +-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 +-#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */ ++#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */ ++#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */ ++#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */ ++#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */ ++#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */ ++#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */ ++#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM8_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM8_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ ++#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 ++#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 ++#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ + #define SSB_SPROM8_AGAIN0_SHIFT 0 + #define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */ + #define SSB_SPROM8_AGAIN1_SHIFT 8 +-#define SSB_SPROM8_AGAIN23 0x10A0 ++#define SSB_SPROM8_AGAIN23 0x00A0 + #define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */ + #define SSB_SPROM8_AGAIN2_SHIFT 0 + #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM8_AGAIN3_SHIFT 8 +-#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */ +-#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ +-#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ +-#define SSB_SPROM8_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */ +-#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ +-#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ +-#define SSB_SPROM8_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ ++#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ + #define SSB_SPROM8_RSSISMF2G 0x000F + #define SSB_SPROM8_RSSISMC2G 0x00F0 + #define SSB_SPROM8_RSSISMC2G_SHIFT 4 +@@ -365,7 +366,7 @@ + #define SSB_SPROM8_RSSISAV2G_SHIFT 8 + #define SSB_SPROM8_BXA2G 0x1800 + #define SSB_SPROM8_BXA2G_SHIFT 11 +-#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ ++#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */ + #define SSB_SPROM8_RSSISMF5G 0x000F + #define SSB_SPROM8_RSSISMC5G 0x00F0 + #define SSB_SPROM8_RSSISMC5G_SHIFT 4 +@@ -373,47 +374,47 @@ + #define SSB_SPROM8_RSSISAV5G_SHIFT 8 + #define SSB_SPROM8_BXA5G 0x1800 + #define SSB_SPROM8_BXA5G_SHIFT 11 +-#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ ++#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */ + #define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ + #define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ + #define SSB_SPROM8_TRI5G_SHIFT 8 +-#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ ++#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */ + #define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ + #define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ + #define SSB_SPROM8_TRI5GH_SHIFT 8 +-#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ ++#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ + #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ + #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ + #define SSB_SPROM8_RXPO5G_SHIFT 8 +-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ ++#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ + #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ + #define SSB_SPROM8_ITSSI_BG_SHIFT 8 +-#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ +-#define SSB_SPROM8_PA0B1 0x10C4 +-#define SSB_SPROM8_PA0B2 0x10C6 +-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ ++#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */ ++#define SSB_SPROM8_PA0B1 0x00C4 ++#define SSB_SPROM8_PA0B2 0x00C6 ++#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */ + #define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ + #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ + #define SSB_SPROM8_ITSSI_A_SHIFT 8 +-#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ ++#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */ + #define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ + #define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ + #define SSB_SPROM8_MAXP_AL_SHIFT 8 +-#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ +-#define SSB_SPROM8_PA1B1 0x10CE +-#define SSB_SPROM8_PA1B2 0x10D0 +-#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ +-#define SSB_SPROM8_PA1LOB1 0x10D4 +-#define SSB_SPROM8_PA1LOB2 0x10D6 +-#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ +-#define SSB_SPROM8_PA1HIB1 0x10DA +-#define SSB_SPROM8_PA1HIB2 0x10DC +-#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ +-#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ +-#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ +-#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ +-#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ ++#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */ ++#define SSB_SPROM8_PA1B1 0x00CE ++#define SSB_SPROM8_PA1B2 0x00D0 ++#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */ ++#define SSB_SPROM8_PA1LOB1 0x00D4 ++#define SSB_SPROM8_PA1LOB2 0x00D6 ++#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ ++#define SSB_SPROM8_PA1HIB1 0x00DA ++#define SSB_SPROM8_PA1HIB2 0x00DC ++#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ ++#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { diff --git a/target/linux/generic-2.6/patches-2.6.34/975-ssb_update.patch b/target/linux/generic-2.6/patches-2.6.34/975-ssb_update.patch new file mode 100644 index 0000000000..ce2c487bff --- /dev/null +++ b/target/linux/generic-2.6/patches-2.6.34/975-ssb_update.patch @@ -0,0 +1,530 @@ +--- a/drivers/ssb/driver_chipcommon.c ++++ b/drivers/ssb/driver_chipcommon.c +@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip + { + if (!cc->dev) + return; /* We don't have a ChipCommon */ ++ if (cc->dev->id.revision >= 11) ++ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); + ssb_pmu_init(cc); + chipco_powercontrol_init(cc); + ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); +@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c + { + return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); + } ++EXPORT_SYMBOL(ssb_chipco_gpio_control); + + u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value) + { +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -834,6 +834,9 @@ int ssb_bus_pcibus_register(struct ssb_b + if (!err) { + ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " + "PCI device %s\n", dev_name(&host_pci->dev)); ++ } else { ++ ssb_printk(KERN_ERR PFX "Failed to register PCI version" ++ " of SSB with error %d\n", err); + } + + return err; +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -168,7 +168,7 @@ err_pci: + } + + /* Get the word-offset for a SSB_SPROM_XXX define. */ +-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) ++#define SPOFF(offset) ((offset) / sizeof(u16)) + /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ + #define SPEX16(_outvar, _offset, _mask, _shift) \ + out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) +@@ -254,7 +254,7 @@ static int sprom_do_read(struct ssb_bus + int i; + + for (i = 0; i < bus->sprom_size; i++) +- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2)); ++ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2)); + + return 0; + } +@@ -285,7 +285,7 @@ static int sprom_do_write(struct ssb_bus + ssb_printk("75%%"); + else if (i % 2) + ssb_printk("."); +- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2)); ++ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); + mmiowb(); + msleep(20); + } +@@ -621,6 +621,14 @@ static int ssb_pci_sprom_get(struct ssb_ + int err = -ENOMEM; + u16 *buf; + ++ if (!ssb_is_sprom_available(bus)) { ++ ssb_printk(KERN_ERR PFX "No SPROM available!\n"); ++ return -ENODEV; ++ } ++ ++ bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ? ++ SSB_SPROM_BASE1 : SSB_SPROM_BASE31; ++ + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); + if (!buf) + goto out; +--- a/drivers/ssb/sprom.c ++++ b/drivers/ssb/sprom.c +@@ -176,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback + { + return fallback_sprom; + } ++ ++/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ ++bool ssb_is_sprom_available(struct ssb_bus *bus) ++{ ++ /* status register only exists on chipcomon rev >= 11 and we need check ++ for >= 31 only */ ++ /* this routine differs from specs as we do not access SPROM directly ++ on PCMCIA */ ++ if (bus->bustype == SSB_BUSTYPE_PCI && ++ bus->chipco.dev->id.revision >= 31) ++ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; ++ ++ return true; ++} +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -305,6 +305,7 @@ struct ssb_bus { + /* ID information about the Chip. */ + u16 chip_id; + u16 chip_rev; ++ u16 sprom_offset; + u16 sprom_size; /* number of words in sprom */ + u8 chip_package; + +@@ -394,6 +395,9 @@ extern int ssb_bus_sdiobus_register(stru + + extern void ssb_bus_unregister(struct ssb_bus *bus); + ++/* Does the device have an SPROM? */ ++extern bool ssb_is_sprom_available(struct ssb_bus *bus); ++ + /* Set a fallback SPROM. + * See kdoc at the function definition for complete documentation. */ + extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -53,6 +53,7 @@ + #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ + #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ + #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ ++#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */ + #define SSB_CHIPCO_CORECTL 0x0008 + #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ + #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +@@ -385,6 +386,7 @@ + + + /** Chip specific Chip-Status register contents. */ ++#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */ + #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 + #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ + #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ +@@ -398,6 +400,18 @@ + #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 + #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ + ++/** Macros to determine SPROM presence based on Chip-Status register. */ ++#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \ ++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_OTP_SEL) ++#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \ ++ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS) ++#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \ ++ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \ ++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_OTP_SEL)) ++ + + + /** Clockcontrol masks and values **/ +@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu { + struct ssb_chipcommon { + struct ssb_device *dev; + u32 capabilities; ++ u32 status; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct ssb_chipcommon_pmu pmu; +--- a/include/linux/ssb/ssb_regs.h ++++ b/include/linux/ssb/ssb_regs.h +@@ -170,26 +170,27 @@ + #define SSB_SPROMSIZE_WORDS_R4 220 + #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) + #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) +-#define SSB_SPROM_BASE 0x1000 +-#define SSB_SPROM_REVISION 0x107E ++#define SSB_SPROM_BASE1 0x1000 ++#define SSB_SPROM_BASE31 0x0800 ++#define SSB_SPROM_REVISION 0x007E + #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ + #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ + #define SSB_SPROM_REVISION_CRC_SHIFT 8 + + /* SPROM Revision 1 */ +-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */ +-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */ +-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */ +-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */ +-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */ +-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */ +-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */ ++#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */ ++#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */ ++#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */ ++#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */ ++#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */ ++#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */ ++#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */ + #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ + #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ + #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM1_BINF 0x105C /* Board info */ ++#define SSB_SPROM1_BINF 0x005C /* Board info */ + #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ + #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ + #define SSB_SPROM1_BINF_CCODE_SHIFT 8 +@@ -197,63 +198,63 @@ + #define SSB_SPROM1_BINF_ANTBG_SHIFT 12 + #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ + #define SSB_SPROM1_BINF_ANTA_SHIFT 14 +-#define SSB_SPROM1_PA0B0 0x105E +-#define SSB_SPROM1_PA0B1 0x1060 +-#define SSB_SPROM1_PA0B2 0x1062 +-#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */ ++#define SSB_SPROM1_PA0B0 0x005E ++#define SSB_SPROM1_PA0B1 0x0060 ++#define SSB_SPROM1_PA0B2 0x0062 ++#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */ + #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */ + #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */ + #define SSB_SPROM1_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */ ++#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */ + #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM1_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */ ++#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */ + #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */ + #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */ + #define SSB_SPROM1_MAXPWR_A_SHIFT 8 +-#define SSB_SPROM1_PA1B0 0x106A +-#define SSB_SPROM1_PA1B1 0x106C +-#define SSB_SPROM1_PA1B2 0x106E +-#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */ ++#define SSB_SPROM1_PA1B0 0x006A ++#define SSB_SPROM1_PA1B1 0x006C ++#define SSB_SPROM1_PA1B2 0x006E ++#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */ + #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/ + #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_ITSSI_A_SHIFT 8 +-#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */ ++#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */ + #define SSB_SPROM1_AGAIN_BG_SHIFT 0 + #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_AGAIN_A_SHIFT 8 + + /* SPROM Revision 2 (inherits from rev 1) */ +-#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */ +-#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */ ++#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ ++#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */ + #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */ + #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */ + #define SSB_SPROM2_MAXP_A_LO_SHIFT 8 +-#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */ ++#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */ + #define SSB_SPROM2_OPO_VALUE 0x00FF + #define SSB_SPROM2_OPO_UNUSED 0xFF00 +-#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */ ++#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */ + + /* SPROM Revision 3 (inherits most data from rev 2) */ +-#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ +-#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ + #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */ + #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8 + #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */ + #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16 +-#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */ ++#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */ ++#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */ + #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ + #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ + #define SSB_SPROM3_CCKPO_2M_SHIFT 4 +@@ -264,100 +265,100 @@ + #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + + /* SPROM Revision 4 */ +-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ +-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ ++#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ ++#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ ++#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */ ++#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ ++#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM4_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM4_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */ + #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ + #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */ +-#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */ +-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 +-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 +-#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ ++#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 ++#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 ++#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ + #define SSB_SPROM4_AGAIN0_SHIFT 0 + #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */ + #define SSB_SPROM4_AGAIN1_SHIFT 8 +-#define SSB_SPROM4_AGAIN23 0x1060 ++#define SSB_SPROM4_AGAIN23 0x0060 + #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */ + #define SSB_SPROM4_AGAIN2_SHIFT 0 + #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM4_AGAIN3_SHIFT 8 +-#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ +-#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ ++#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ + #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ + #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ + #define SSB_SPROM4_ITSSI_BG_SHIFT 8 +-#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */ ++#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */ + #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ + #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ + #define SSB_SPROM4_ITSSI_A_SHIFT 8 +-#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */ +-#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ +-#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ +-#define SSB_SPROM4_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */ +-#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ +-#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ +-#define SSB_SPROM4_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */ +-#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */ +-#define SSB_SPROM4_PA0B2 0x1086 +-#define SSB_SPROM4_PA1B0 0x108E +-#define SSB_SPROM4_PA1B1 0x1090 +-#define SSB_SPROM4_PA1B2 0x1092 ++#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */ ++#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */ ++#define SSB_SPROM4_PA0B2 0x0086 ++#define SSB_SPROM4_PA1B0 0x008E ++#define SSB_SPROM4_PA1B1 0x0090 ++#define SSB_SPROM4_PA1B2 0x0092 + + /* SPROM Revision 5 (inherits most data from rev 4) */ +-#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ +-#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ +-#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ +-#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ +-#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ ++#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */ ++#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */ ++#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ ++#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ + #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ + #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ + #define SSB_SPROM5_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */ + #define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM5_GPIOB_P3_SHIFT 8 + + /* SPROM Revision 8 */ +-#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ +-#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ +-#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ +-#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ +-#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ +-#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ +-#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ +-#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ +-#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ +-#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +-#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ +-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 +-#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */ ++#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */ ++#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */ ++#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */ ++#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */ ++#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */ ++#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */ ++#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM8_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM8_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ ++#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 ++#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 ++#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ + #define SSB_SPROM8_AGAIN0_SHIFT 0 + #define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */ + #define SSB_SPROM8_AGAIN1_SHIFT 8 +-#define SSB_SPROM8_AGAIN23 0x10A0 ++#define SSB_SPROM8_AGAIN23 0x00A0 + #define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */ + #define SSB_SPROM8_AGAIN2_SHIFT 0 + #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM8_AGAIN3_SHIFT 8 +-#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */ +-#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ +-#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ +-#define SSB_SPROM8_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */ +-#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ +-#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ +-#define SSB_SPROM8_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ ++#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ + #define SSB_SPROM8_RSSISMF2G 0x000F + #define SSB_SPROM8_RSSISMC2G 0x00F0 + #define SSB_SPROM8_RSSISMC2G_SHIFT 4 +@@ -365,7 +366,7 @@ + #define SSB_SPROM8_RSSISAV2G_SHIFT 8 + #define SSB_SPROM8_BXA2G 0x1800 + #define SSB_SPROM8_BXA2G_SHIFT 11 +-#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ ++#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */ + #define SSB_SPROM8_RSSISMF5G 0x000F + #define SSB_SPROM8_RSSISMC5G 0x00F0 + #define SSB_SPROM8_RSSISMC5G_SHIFT 4 +@@ -373,47 +374,47 @@ + #define SSB_SPROM8_RSSISAV5G_SHIFT 8 + #define SSB_SPROM8_BXA5G 0x1800 + #define SSB_SPROM8_BXA5G_SHIFT 11 +-#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ ++#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */ + #define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ + #define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ + #define SSB_SPROM8_TRI5G_SHIFT 8 +-#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ ++#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */ + #define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ + #define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ + #define SSB_SPROM8_TRI5GH_SHIFT 8 +-#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ ++#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ + #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ + #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ + #define SSB_SPROM8_RXPO5G_SHIFT 8 +-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ ++#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ + #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ + #define SSB_SPROM8_ITSSI_BG_SHIFT 8 +-#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ +-#define SSB_SPROM8_PA0B1 0x10C4 +-#define SSB_SPROM8_PA0B2 0x10C6 +-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ ++#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */ ++#define SSB_SPROM8_PA0B1 0x00C4 ++#define SSB_SPROM8_PA0B2 0x00C6 ++#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */ + #define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ + #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ + #define SSB_SPROM8_ITSSI_A_SHIFT 8 +-#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ ++#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */ + #define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ + #define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ + #define SSB_SPROM8_MAXP_AL_SHIFT 8 +-#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ +-#define SSB_SPROM8_PA1B1 0x10CE +-#define SSB_SPROM8_PA1B2 0x10D0 +-#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ +-#define SSB_SPROM8_PA1LOB1 0x10D4 +-#define SSB_SPROM8_PA1LOB2 0x10D6 +-#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ +-#define SSB_SPROM8_PA1HIB1 0x10DA +-#define SSB_SPROM8_PA1HIB2 0x10DC +-#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ +-#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ +-#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ +-#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ +-#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ ++#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */ ++#define SSB_SPROM8_PA1B1 0x00CE ++#define SSB_SPROM8_PA1B2 0x00D0 ++#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */ ++#define SSB_SPROM8_PA1LOB1 0x00D4 ++#define SSB_SPROM8_PA1LOB2 0x00D6 ++#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ ++#define SSB_SPROM8_PA1HIB1 0x00DA ++#define SSB_SPROM8_PA1HIB2 0x00DC ++#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ ++#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { -- 2.25.1