From 3b98b57fa796d0c8d4cbdf6b2b6faa08197a9858 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 8 Jan 2014 20:11:27 +0900 Subject: [PATCH] include: delete unused header files Signed-off-by: Masahiro Yamada --- include/amba_clcd.h | 77 ----- include/asm-generic/global_data_flags.h | 28 -- include/at45.h | 68 ----- include/at91rm9200_i2c.h | 114 ------- include/at91rm9200_net.h | 50 --- include/bcm5221.h | 88 ------ include/configs/AdderUSB.h | 35 --- include/configs/EXBITGEN.h | 190 ------------ include/configs/MVS1.h | 384 ------------------------ include/configs/ORSG.h | 282 ----------------- include/configs/mpq101.h | 359 ---------------------- include/configs/tb0229.h | 175 ----------- include/cramfs/cramfs_fs_sb.h | 19 -- include/da9030.h | 102 ------- include/dm9161.h | 127 -------- include/faraday/ftsdc021.h | 13 - include/ks8721.h | 75 ----- include/linux/mtd/inftl-user.h | 89 ------ include/linux/mtd/jffs2-user.h | 35 --- include/smiLynxEM.h | 163 ---------- 20 files changed, 2473 deletions(-) delete mode 100644 include/amba_clcd.h delete mode 100644 include/asm-generic/global_data_flags.h delete mode 100644 include/at45.h delete mode 100644 include/at91rm9200_i2c.h delete mode 100644 include/at91rm9200_net.h delete mode 100644 include/bcm5221.h delete mode 100644 include/configs/AdderUSB.h delete mode 100644 include/configs/EXBITGEN.h delete mode 100644 include/configs/MVS1.h delete mode 100644 include/configs/ORSG.h delete mode 100644 include/configs/mpq101.h delete mode 100644 include/configs/tb0229.h delete mode 100644 include/cramfs/cramfs_fs_sb.h delete mode 100644 include/da9030.h delete mode 100644 include/dm9161.h delete mode 100644 include/faraday/ftsdc021.h delete mode 100644 include/ks8721.h delete mode 100644 include/linux/mtd/inftl-user.h delete mode 100644 include/linux/mtd/jffs2-user.h delete mode 100644 include/smiLynxEM.h diff --git a/include/amba_clcd.h b/include/amba_clcd.h deleted file mode 100644 index db80517e53..0000000000 --- a/include/amba_clcd.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Register definitions for the AMBA CLCD logic cell. - * - * derived from David A Rusling, although rearranged as a C structure - * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel. - * - * Copyright (C) 2001 ARM Limited - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -/* - * CLCD Controller Internal Register addresses - */ -struct clcd_registers { - u32 tim0; /* 0x00 */ - u32 tim1; - u32 tim2; - u32 tim3; - u32 ubas; /* 0x10 */ - u32 lbas; -#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW) - u32 ienb; - u32 cntl; -#else /* Someone rearranged these two registers on the Versatile */ - u32 cntl; - u32 ienb; -#endif - u32 stat; /* 0x20 */ - u32 intr; - u32 ucur; - u32 lcur; - u32 unused[0x74]; /* 0x030..0x1ff */ - u32 palette[0x80]; /* 0x200..0x3ff */ -}; - -/* Bit definition for TIM2 */ -#define TIM2_CLKSEL (1 << 5) -#define TIM2_IVS (1 << 11) -#define TIM2_IHS (1 << 12) -#define TIM2_IPC (1 << 13) -#define TIM2_IOE (1 << 14) -#define TIM2_BCD (1 << 26) - -/* Bit definitions for control register */ -#define CNTL_LCDEN (1 << 0) -#define CNTL_LCDBPP1 (0 << 1) -#define CNTL_LCDBPP2 (1 << 1) -#define CNTL_LCDBPP4 (2 << 1) -#define CNTL_LCDBPP8 (3 << 1) -#define CNTL_LCDBPP16 (4 << 1) -#define CNTL_LCDBPP16_565 (6 << 1) -#define CNTL_LCDBPP24 (5 << 1) -#define CNTL_LCDBW (1 << 4) -#define CNTL_LCDTFT (1 << 5) -#define CNTL_LCDMONO8 (1 << 6) -#define CNTL_LCDDUAL (1 << 7) -#define CNTL_BGR (1 << 8) -#define CNTL_BEBO (1 << 9) -#define CNTL_BEPO (1 << 10) -#define CNTL_LCDPWR (1 << 11) -#define CNTL_LCDVCOMP(x) ((x) << 12) -#define CNTL_LDMAFIFOTIME (1 << 15) -#define CNTL_WATERMARK (1 << 16) - -/* u-boot specific: information passed by the board file */ -struct clcd_config { - struct clcd_registers *address; - u32 tim0; - u32 tim1; - u32 tim2; - u32 tim3; - u32 cntl; - unsigned long pixclock; -}; diff --git a/include/asm-generic/global_data_flags.h b/include/asm-generic/global_data_flags.h deleted file mode 100644 index bb57fb6c4a..0000000000 --- a/include/asm-generic/global_data_flags.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * transitional header until we merge global_data.h - * - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __ASM_GENERIC_GLOBAL_DATA_FLAGS_H -#define __ASM_GENERIC_GLOBAL_DATA_FLAGS_H - -/* - * Global Data Flags - * - * Note: The low 16 bits are expected for common code. If your arch - * really needs to add your own, use the high 16bits. - */ -#define GD_FLG_RELOC 0x0001 /* Code was relocated to RAM */ -#define GD_FLG_DEVINIT 0x0002 /* Devices have been initialized */ -#define GD_FLG_SILENT 0x0004 /* Silent mode */ -#define GD_FLG_POSTFAIL 0x0008 /* Critical POST test failed */ -#define GD_FLG_POSTSTOP 0x0010 /* POST seqeunce aborted */ -#define GD_FLG_LOGINIT 0x0020 /* Log Buffer has been initialized */ -#define GD_FLG_DISABLE_CONSOLE 0x0040 /* Disable console (in & out) */ -#define GD_FLG_ENV_READY 0x0080 /* Environment imported into hash table */ - -#endif diff --git a/include/at45.h b/include/at45.h deleted file mode 100644 index df649ba971..0000000000 --- a/include/at45.h +++ /dev/null @@ -1,68 +0,0 @@ -#ifndef _AT45_H_ -#define _AT45_H_ -#ifdef CONFIG_DATAFLASH_MMC_SELECT -extern void AT91F_SelectMMC(void); -extern void AT91F_SelectSPI(void); -extern int AT91F_GetMuxStatus(void); -#endif -extern void AT91F_SpiInit(void); -extern void AT91F_SpiEnable(int cs); -extern unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc ); -extern AT91S_DataFlashStatus AT91F_DataFlashSendCommand( - AT91PS_DataFlash pDataFlash, - unsigned char OpCode, - unsigned int CmdSize, - unsigned int DataflashAddress); -extern AT91S_DataFlashStatus AT91F_DataFlashGetStatus ( - AT91PS_DataflashDesc pDesc); -extern AT91S_DataFlashStatus AT91F_DataFlashWaitReady ( - AT91PS_DataflashDesc pDataFlashDesc, - unsigned int timeout); -extern AT91S_DataFlashStatus AT91F_DataFlashContinuousRead ( - AT91PS_DataFlash pDataFlash, - int src, - unsigned char *dataBuffer, - int sizeToRead ); -extern AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - unsigned int dest, - unsigned int SizeToWrite); -extern AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned int page); -extern AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer ( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned char *dataBuffer, - unsigned int bufferAddress, - int SizeToWrite ); -extern AT91S_DataFlashStatus AT91F_PageErase( - AT91PS_DataFlash pDataFlash, - unsigned int page); -extern AT91S_DataFlashStatus AT91F_BlockErase( - AT91PS_DataFlash pDataFlash, - unsigned int block); -extern AT91S_DataFlashStatus AT91F_WriteBufferToMain ( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned int dest ); -extern AT91S_DataFlashStatus AT91F_PartialPageWrite ( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - unsigned int dest, - unsigned int size); -extern AT91S_DataFlashStatus AT91F_DataFlashWrite( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - int dest, - int size ); -extern int AT91F_DataFlashRead( - AT91PS_DataFlash pDataFlash, - unsigned long addr, - unsigned long size, - char *buffer); -extern int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc); - -#endif diff --git a/include/at91rm9200_i2c.h b/include/at91rm9200_i2c.h deleted file mode 100644 index 486660638c..0000000000 --- a/include/at91rm9200_i2c.h +++ /dev/null @@ -1,114 +0,0 @@ -/* ---------------------------------------------------------------------------- */ -/* ATMEL Microcontroller Software Support - ROUSSET - */ -/* ---------------------------------------------------------------------------- */ -/* The software is delivered "AS IS" without warranty or condition of any */ -/* kind, either express, implied or statutory. This includes without */ -/* limitation any warranty or condition with respect to merchantability or */ -/* fitness for any particular purpose, or against the infringements of */ -/* intellectual property rights of others. */ -/* ---------------------------------------------------------------------------- */ -/* File Name : at91rm9200_i2c.h */ -/* Object : AT91RM9200 / TWI definitions */ -/* Generated : AT91 SW Application Group 12/03/2002 (10:48:02) */ -/* */ -/* ---------------------------------------------------------------------------- */ - -#ifndef AT91RM9200_TWI_H -#define AT91RM9200_TWI_H - -/* ******************************************************************************/ -/* SOFTWARE API DEFINITION FOR Two-wire Interface */ -/* ******************************************************************************/ -#ifndef __ASSEMBLY__ - -typedef struct _AT91S_TWI { - AT91_REG TWI_CR; /* Control Register */ - AT91_REG TWI_MMR; /* Master Mode Register */ - AT91_REG TWI_SMR; /* Slave Mode Register */ - AT91_REG TWI_IADR; /* Internal Address Register */ - AT91_REG TWI_CWGR; /* Clock Waveform Generator Register */ - AT91_REG Reserved0[3]; - AT91_REG TWI_SR; /* Status Register */ - AT91_REG TWI_IER; /* Interrupt Enable Register */ - AT91_REG TWI_IDR; /* Interrupt Disable Register */ - AT91_REG TWI_IMR; /* Interrupt Mask Register */ - AT91_REG TWI_RHR; /* Receive Holding Register */ - AT91_REG TWI_THR; /* Transmit Holding Register */ - AT91_REG Reserved1[50]; - AT91_REG TWI_RPR; /* Receive Pointer Register */ - AT91_REG TWI_RCR; /* Receive Counter Register */ - AT91_REG TWI_TPR; /* Transmit Pointer Register */ - AT91_REG TWI_TCR; /* Transmit Counter Register */ - AT91_REG TWI_RNPR; /* Receive Next Pointer Register */ - AT91_REG TWI_RNCR; /* Receive Next Counter Register */ - AT91_REG TWI_TNPR; /* Transmit Next Pointer Register */ - AT91_REG TWI_TNCR; /* Transmit Next Counter Register */ - AT91_REG TWI_PTCR; /* PDC Transfer Control Register */ - AT91_REG TWI_PTSR; /* PDC Transfer Status Register */ -} AT91S_TWI, *AT91PS_TWI; - -#endif - -/* -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- */ -#define AT91C_TWI_START (0x1 << 0) /* (TWI) Send a START Condition */ -#define AT91C_TWI_STOP (0x1 << 1) /* (TWI) Send a STOP Condition */ -#define AT91C_TWI_MSEN (0x1 << 2) /* (TWI) TWI Master Transfer Enabled */ -#define AT91C_TWI_MSDIS (0x1 << 3) /* (TWI) TWI Master Transfer Disabled */ -#define AT91C_TWI_SVEN (0x1 << 4) /* (TWI) TWI Slave Transfer Enabled */ -#define AT91C_TWI_SVDIS (0x1 << 5) /* (TWI) TWI Slave Transfer Disabled */ -#define AT91C_TWI_SWRST (0x1 << 7) /* (TWI) Software Reset */ -/* -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- */ -#define AT91C_TWI_IADRSZ (0x3 << 8) /* (TWI) Internal Device Address Size */ -#define AT91C_TWI_IADRSZ_NO (0x0 << 8) /* (TWI) No internal device address */ -#define AT91C_TWI_IADRSZ_1_BYTE (0x1 << 8) /* (TWI) One-byte internal device address */ -#define AT91C_TWI_IADRSZ_2_BYTE (0x2 << 8) /* (TWI) Two-byte internal device address */ -#define AT91C_TWI_IADRSZ_3_BYTE (0x3 << 8) /* (TWI) Three-byte internal device address */ -#define AT91C_TWI_MREAD (0x1 << 12) /* (TWI) Master Read Direction */ -#define AT91C_TWI_DADR (0x7F << 6) /* (TWI) Device Address */ -/* -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- */ -#define AT91C_TWI_SADR (0x7F << 16) /* (TWI) Slave Device Address */ -/* -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- */ -#define AT91C_TWI_CLDIV (0xFF << 0) /* (TWI) Clock Low Divider */ -#define AT91C_TWI_CHDIV (0xFF << 8) /* (TWI) Clock High Divider */ -#define AT91C_TWI_CKDIV (0x7 << 16) /* (TWI) Clock Divider */ -/* -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- */ -#define AT91C_TWI_TXCOMP (0x1 << 0) /* (TWI) Transmission Completed */ -#define AT91C_TWI_RXRDY (0x1 << 1) /* (TWI) Receive holding register ReaDY */ -#define AT91C_TWI_TXRDY (0x1 << 2) /* (TWI) Transmit holding register ReaDY*/ -#define AT91C_TWI_SVREAD (0x1 << 3) /* (TWI) Slave Read */ -#define AT91C_TWI_SVACC (0x1 << 4) /* (TWI) Slave Access */ -#define AT91C_TWI_GCACC (0x1 << 5) /* (TWI) General Call Access */ -#define AT91C_TWI_OVRE (0x1 << 6) /* (TWI) Overrun Error */ -#define AT91C_TWI_UNRE (0x1 << 7) /* (TWI) Underrun Error */ -#define AT91C_TWI_NACK (0x1 << 8) /* (TWI) Not Acknowledged */ -#define AT91C_TWI_ARBLST (0x1 << 9) /* (TWI) Arbitration Lost */ -/* -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- */ -/* -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register ------- */ -/* -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- */ - -/* - i2c Support for Atmel's AT91RM9200 Two-Wire Interface - - (c) Rick Bronson - - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef AT91_I2C_H -#define AT91_I2C_H - -#define AT91C_TWI_CLOCK 100000 -#define AT91C_TWI_SCLOCK (10 * AT91C_MASTER_CLOCK / AT91C_TWI_CLOCK) -#define AT91C_TWI_CKDIV1 (2 << 16) /* TWI clock divider. NOTE: see Errata #22 */ - -#if (AT91C_TWI_SCLOCK % 10) >= 5 -#define AT91C_TWI_CLDIV2 ((AT91C_TWI_SCLOCK / 10) - 5) -#else -#define AT91C_TWI_CLDIV2 ((AT91C_TWI_SCLOCK / 10) - 6) -#endif -#define AT91C_TWI_CLDIV3 ((AT91C_TWI_CLDIV2 + (4 - AT91C_TWI_CLDIV2 % 4)) >> 2) - -#define AT91C_EEPROM_I2C_ADDRESS (0x50 << 16) - -#endif /* __ASSEMBLY__ */ -#endif /* AT91RM9200_TWI_H */ diff --git a/include/at91rm9200_net.h b/include/at91rm9200_net.h deleted file mode 100644 index 831cb1e260..0000000000 --- a/include/at91rm9200_net.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Ethernet: An implementation of the Ethernet Device Driver suite for the - * uClinux 2.0.38 operating system. This Driver has been developed - * for AT75C220 board. - * - * NOTE: The driver is implemented for one MAC - * - * Version: @(#)at91rm9200_net.h 1.0.0 01/10/2001 - * - * Authors: Lineo Inc - * - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef AT91RM9200_ETHERNET -#define AT91RM9200_ETHERNET - -#include -#include -#include - -#define ETHERNET_ADDRESS_SIZE 6 - -typedef unsigned char UCHAR; - -/* Interface to drive the physical layer */ -typedef struct _AT91S_PhyOps -{ - unsigned char (*Init)(AT91S_EMAC *pmac); - unsigned int (*IsPhyConnected)(AT91S_EMAC *pmac); - unsigned char (*GetLinkSpeed)(AT91S_EMAC *pmac); - unsigned char (*AutoNegotiate)(AT91S_EMAC *pmac, int *); - -} AT91S_PhyOps,*AT91PS_PhyOps; - - -#define EMAC_DESC_DONE 0x00000001 /* ownership bit */ -#define EMAC_DESC_WRAP 0x00000002 /* bit for wrap */ - -/****************** function prototypes **********************/ - -/* MII functions */ -void at91rm9200_EmacEnableMDIO(AT91PS_EMAC p_mac); -void at91rm9200_EmacDisableMDIO(AT91PS_EMAC p_mac); -UCHAR at91rm9200_EmacReadPhy(AT91PS_EMAC p_mac, unsigned char RegisterAddress, unsigned short *pInput); -UCHAR at91rm9200_EmacWritePhy(AT91PS_EMAC p_mac, unsigned char RegisterAddress, unsigned short *pOutput); -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops); - -#endif /* AT91RM9200_ETHERNET */ diff --git a/include/bcm5221.h b/include/bcm5221.h deleted file mode 100644 index 4719389cfd..0000000000 --- a/include/bcm5221.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Broadcom BCM5221 Ethernet PHY - * - * (C) Copyright 2005 REA Elektronik GmbH - * Anders Larsen - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define BCM5221_BMCR 0 /* Basic Mode Control Register */ -#define BCM5221_BMSR 1 /* Basic Mode Status Register */ -#define BCM5221_PHYID1 2 /* PHY Identifier Register 1 */ -#define BCM5221_PHYID2 3 /* PHY Identifier Register 2 */ -#define BCM5221_ANAR 4 /* Auto-negotiation Advertisement Register */ -#define BCM5221_ANLPAR 5 /* Auto-negotiation Link Partner Ability Register */ -#define BCM5221_ANER 6 /* Auto-negotiation Expansion Register */ -#define BCM5221_ACSR 24 /* Auxiliary Control/Status Register */ -#define BCM5221_INTR 26 /* Interrupt Register */ - -/* --Bit definitions: BCM5221_BMCR */ -#define BCM5221_RESET (1 << 15) /* 1= Software Reset; 0=Normal Operation */ -#define BCM5221_LOOPBACK (1 << 14) /* 1=loopback Enabled; 0=Normal Operation */ -#define BCM5221_SPEED_SELECT (1 << 13) /* 1=100Mbps; 0=10Mbps */ -#define BCM5221_AUTONEG (1 << 12) -#define BCM5221_POWER_DOWN (1 << 11) -#define BCM5221_ISOLATE (1 << 10) -#define BCM5221_RESTART_AUTONEG (1 << 9) -#define BCM5221_DUPLEX_MODE (1 << 8) -#define BCM5221_COLLISION_TEST (1 << 7) - -/*--Bit definitions: BCM5221_BMSR */ -#define BCM5221_100BASE_T4 (1 << 15) -#define BCM5221_100BASE_TX_FD (1 << 14) -#define BCM5221_100BASE_TX_HD (1 << 13) -#define BCM5221_10BASE_T_FD (1 << 12) -#define BCM5221_10BASE_T_HD (1 << 11) -#define BCM5221_MF_PREAMB_SUPPR (1 << 6) -#define BCM5221_AUTONEG_COMP (1 << 5) -#define BCM5221_REMOTE_FAULT (1 << 4) -#define BCM5221_AUTONEG_ABILITY (1 << 3) -#define BCM5221_LINK_STATUS (1 << 2) -#define BCM5221_JABBER_DETECT (1 << 1) -#define BCM5221_EXTEND_CAPAB (1 << 0) - -/*--definitions: BCM5221_PHYID1 */ -#define BCM5221_PHYID1_OUI 0x1018 -#define BCM5221_LSB_MASK 0x3F - -/*--Bit definitions: BCM5221_ANAR, BCM5221_ANLPAR */ -#define BCM5221_NP (1 << 15) -#define BCM5221_ACK (1 << 14) -#define BCM5221_RF (1 << 13) -#define BCM5221_FCS (1 << 10) -#define BCM5221_T4 (1 << 9) -#define BCM5221_TX_FDX (1 << 8) -#define BCM5221_TX_HDX (1 << 7) -#define BCM5221_10_FDX (1 << 6) -#define BCM5221_10_HDX (1 << 5) -#define BCM5221_AN_IEEE_802_3 0x0001 - -/*--Bit definitions: BCM5221_ANER */ -#define BCM5221_PDF (1 << 4) -#define BCM5221_LP_NP_ABLE (1 << 3) -#define BCM5221_NP_ABLE (1 << 2) -#define BCM5221_PAGE_RX (1 << 1) -#define BCM5221_LP_AN_ABLE (1 << 0) - -/*--Bit definitions: BCM5221_ACSR */ -#define BCM5221_100 (1 << 1) -#define BCM5221_FDX (1 << 0) - -/*--Bit definitions: BCM5221_INTR */ -#define BCM5221_FDX_LED (1 << 15) -#define BCM5221_INTR_ENABLE (1 << 14) -#define BCM5221_FDX_MASK (1 << 11) -#define BCM5221_SPD_MASK (1 << 10) -#define BCM5221_LINK_MASK (1 << 9) -#define BCM5221_INTR_MASK (1 << 8) -#define BCM5221_FDX_CHG (1 << 3) -#define BCM5221_SPD_CHG (1 << 2) -#define BCM5221_LINK_CHG (1 << 1) -#define BCM5221_INTR_STATUS (1 << 0) - -/****************** function prototypes **********************/ -unsigned int bcm5221_IsPhyConnected(AT91PS_EMAC p_mac); -unsigned char bcm5221_GetLinkSpeed(AT91PS_EMAC p_mac); -unsigned char bcm5221_AutoNegotiate(AT91PS_EMAC p_mac, int *status); -unsigned char bcm5221_InitPhy(AT91PS_EMAC p_mac); diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h deleted file mode 100644 index ef76ce4cfc..0000000000 --- a/include/configs/AdderUSB.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2006 CodeHermit. - * Bryan O'Donoghue - * - * Provides support for USB console on the Analogue & Micro Adder87x - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __ADDERUSB__ -#define __ADDERUSB__ - -/* Include the board port */ -#include "Adder.h" - -#define CONFIG_USB_DEVICE /* Include UDC driver */ -#define CONFIG_USB_TTY /* Bind the TTY driver to UDC */ -#define CONFIG_SYS_USB_EXTC_CLK 0x02 /* Oscillator on EXTC_CLK 2 */ -#define CONFIG_SYS_USB_BRG_CLK 0x04 /* or use Baud rate generator 0x04 */ -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Console is in env */ - -/* If you have a USB-IF assigned VendorID then you may wish to define - * your own vendor specific values either in BoardName.h or directly in - * usbd_vendor_info.h - */ - -/* -#define CONFIG_USBD_MANUFACTURER "CodeHermit.ie" -#define CONFIG_USBD_PRODUCT_NAME "Das U-Boot" -#define CONFIG_USBD_VENDORID 0xFFFF -#define CONFIG_USBD_PRODUCTID_GSERIAL 0xFFFF -#define CONFIG_USBD_PRODUCTID_CDCACM 0xFFFE -*/ - -#endif /* __ADDERUSB_H__ */ diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h deleted file mode 100644 index 208b599f6d..0000000000 --- a/include/configs/EXBITGEN.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ -#define CONFIG_EXBITGEN 1 /* on a Exbit Generic board */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ - -/* I2C configuration */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_SPEED 40000 /* I2C speed */ -#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ - -/* environment is in EEPROM */ -#define CONFIG_ENV_IS_IN_EEPROM 1 -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM - -#ifdef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x56 /* 1010110 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit internal addressing */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 /* ... and 1 bit in I2C address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 4 bytes per page */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 40 /* write takes up to 40 msec */ -#define CONFIG_ENV_OFFSET 4 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 350 /* that is 350 bytes only! */ -#endif - -#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ -/* Explanation: - autbooting is altogether disabled and cannot be - enabled if CONFIG_BOOTDELAY is negative. - If you want shorter bootdelay, then - - "setenv bootdelay " to the proper value -*/ - -#define CONFIG_BOOTCOMMAND "bootm 20400000 20800000" - -#define CONFIG_BOOTARGS "root=/dev/ram " \ - "ramdisk_size=32768 " \ - "console=ttyS0,115200 " \ - "ram=128M debug" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_PPC4xx_EMAC -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -/* UART configuration */ -#define CONFIG_SYS_BASE_BAUD 691200 - -/* Default baud rate */ -#define CONFIG_BAUDRATE 115200 - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#undef CONFIG_PCI /* no pci support */ - -/*----------------------------------------------------------------------- - * External peripheral base address - *----------------------------------------------------------------------- - */ -#undef CONFIG_IDE_PCMCIA /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* no reset for ide supported */ - -#define CONFIG_SYS_KEY_REG_BASE_ADDR 0xF0100000 -#define CONFIG_SYS_IR_REG_BASE_ADDR 0xF0200000 -#define CONFIG_SYS_FPGA_REG_BASE_ADDR 0xF0300000 - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH0_BASE 0xFFF80000 -#define CONFIG_SYS_FLASH0_SIZE 0x00080000 -#define CONFIG_SYS_FLASH1_BASE 0x20000000 -#define CONFIG_SYS_FLASH1_SIZE 0x02000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ - -#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_RAMSTART -#endif - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 5 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OFFSET 0x00060000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x00010000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x00010000 /* see README - env sector total size */ -#endif - -/* On Chip Memory location/size */ -#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 - -/* Global info and initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif -#endif /* __CONFIG_H */ diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h deleted file mode 100644 index 73cd2a9a37..0000000000 --- a/include/configs/MVS1.h +++ /dev/null @@ -1,384 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ -#define CONFIG_MVS 1 /* ...on a MVsensor module */ -#define CONFIG_MVS_16BIT_FLASH /* ...with 16-bit flash access */ -#define CONFIG_8xx_GCLK_FREQ 50000000/* ... and a 50 MHz CPU */ - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#undef CONFIG_8xx_CONS_SMC1 /* Console is *NOT* on SMC1 */ -#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 115200 /* console baudrate */ -#define CONFIG_BOOTDELAY 5 /* autoboot after this many seconds */ - -#define CONFIG_PREBOOT "echo;" \ - "echo To mount root over NFS use \"run bootnet\";" \ - "echo To mount root from FLASH use \"run bootflash\";" \ - "echo" -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw" -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#define CONFIG_WATCHDOG /* watchdog disabled/enabled */ - -#undef CONFIG_STATUS_LED /* Status LED disabled/enabled */ - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_VENDOREX - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_IMI -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_RUN - - -/* - * Miscellaneous configurable options - */ -#undef CONFIG_SYS_LONGHELP /* undef to save memory */ - -#undef CONFIG_SYS_HUSH_PARSER /* Hush parse for U-Boot ?? */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 - -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 192 kB for Monitor */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip (for AMD320DB chip) */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* 4MB flash - use bottom sectors of a bottom boot sector flash (16 bit access) */ -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector (bottom boot sector) */ -#define CONFIG_ENV_SIZE 0x2000 /* Used Size of Environment Sector 8k */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - */ -#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR (SCCR_TBS | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PCCARD 0 /* **DON'T** Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 0 /* max. no. of IDE buses */ -#define CONFIG_SYS_IDE_MAXDEVICE 0 /* max. no. of drives per IDE bus */ - - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#undef FLASH_BASE1_PRELIM - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - - -/* - * FLASH timing: - */ -/* 50 MHz CPU - 50 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 2, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ - OR_SCY_2_CLK | OR_EHTR | OR_BI) -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -/* -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \ - OR_SCY_5_CLK | OR_EHTR) -*/ - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#ifdef CONFIG_MVS_16BIT_FLASH -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) -#else -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V ) -#endif - -#undef CONFIG_SYS_OR1_REMAP -#undef CONFIG_SYS_OR1_PRELIM -#undef CONFIG_SYS_BR1_PRELIM -/* - * BR2/3 and OR2/3 (SDRAM) - * - */ -#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ -#undef SDRAM_BASE3_PRELIM -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 - -#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -#undef CONFIG_SYS_OR3_PRELIM -#undef CONFIG_SYS_BR3_PRELIM - - -/* - * Memory Periodic Timer Prescaler - * - * The Divider for PTA (refresh timer) configuration is based on an - * example SDRAM configuration (64 MBit, one bank). The adjustment to - * the number of chip selects (NCS) and the actually needed refresh - * rate is done by setting MPTPR. - * - * PTA is calculated from - * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) - * - * gclk CPU clock (not bus clock!) - * Trefresh Refresh cycle * 4 (four word bursts used) - * - * 4096 Rows from SDRAM example configuration - * 1000 factor s -> ms - * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - * -------------------------------------------- - * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 - * - * 50 MHz => 50.000.000 / Divider = 98 - * 66 Mhz => 66.000.000 / Divider = 129 - * 80 Mhz => 80.000.000 / Divider = 156 - */ -#define CONFIG_SYS_MAMR_PTA 98 - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A7 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -#endif /* __CONFIG_H */ diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h deleted file mode 100644 index 5a9bee3496..0000000000 --- a/include/configs/ORSG.h +++ /dev/null @@ -1,282 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ -#define CONFIG_ORSG 1 /* ...on a ORSG board */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ - -#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ - -#define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND "go fff00100" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_ELF -#define CONFIG_CMD_BSP -#define CONFIG_CMD_EEPROM - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() - -#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ -#define CONFIG_SYS_BASE_BAUD 691200 - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci adapter */ -#undef CONFIG_PCI_PNP /* no pci plug-and-play */ - /* resource configuration */ - -#undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0411 /* PCI Device ID: ORSG */ -#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ -#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */ -#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFFD0000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ -#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ -#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ -/* - * The following defines are added for buggy IOP480 byte interface. - * All other boards should use the standard values (CPCI405 etc.) - */ -#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ -#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ -#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#if 0 /* Use NVRAM for environment variables */ -/*----------------------------------------------------------------------- - * NVRAM organization - */ -#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */ -#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */ -#define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */ -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */ -#define CONFIG_SYS_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */ - -#else /* Use EEPROM for environment variables */ - -#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 0x300 /* 768 bytes may be used for env vars */ - /* total size of a CAT24WC08 is 1024 bytes */ -#endif - -/*----------------------------------------------------------------------- - * I2C EEPROM (CAT24WC08) for environment - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ - /* 16 byte page write mode using*/ - /* last 4 bits of the address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */ - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - */ - -/* Memory Bank 0 (Flash Bank 0) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x92015480 -#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */ - -/* Memory Bank 1 (Flash Bank 1) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x92015480 -#define CONFIG_SYS_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */ - -/* Memory Bank 2 (PLD - FPGA-boot) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 3 (PLD - OSL) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB3CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 4 (Spartan2 1) initialization */ -#define CONFIG_SYS_EBC_PB4AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB4CR 0xF209C000 /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/ - -/* Memory Bank 5 (Spartan2 2) initialization */ -#define CONFIG_SYS_EBC_PB5AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB5CR 0xF309C000 /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/ - -/* Memory Bank 6 (Virtex 1) initialization */ -#define CONFIG_SYS_EBC_PB6AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB6CR 0xF409A000 /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/ - -/* Memory Bank 7 (Virtex 2) initialization */ -#define CONFIG_SYS_EBC_PB7AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB7CR 0xF509A000 /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/ - - -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ - -/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ -#define CONFIG_SYS_TEMP_STACK_OCM 1 - -/* On Chip Memory location */ -#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#endif /* __CONFIG_H */ diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h deleted file mode 100644 index 4cac8ee46a..0000000000 --- a/include/configs/mpq101.h +++ /dev/null @@ -1,359 +0,0 @@ -/* - * Copyright 2011 Alex Dubov - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Merury Computers MPQ101 board configuration file - * - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifdef CONFIG_36BIT -# define CONFIG_PHYS_64BIT -#endif - -/* High Level Configuration Options */ -#define CONFIG_BOOKE /* BOOKE */ -#define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */ -#define CONFIG_MPC8548 /* MPC8548 specific */ -#define CONFIG_MPQ101 /* MPQ101 board specific */ - -#define CONFIG_SYS_SRIO /* enable serial RapidIO */ -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ -#define CONFIG_FSL_LAW /* Use common FSL init code */ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_PANIC_HANG - -/* - * Only possible on E500 Version 2 or newer cores. - */ -#define CONFIG_ENABLE_36BIT_PHYS - -#ifdef CONFIG_PHYS_64BIT -# define CONFIG_ADDR_MAP -# define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ -#endif - - -#define CONFIG_SYS_CLK_FREQ 33000000 /* sysclk for MPC85xx */ - -#define CONFIG_SYS_CCSRBAR 0xe0000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* DDR Setup */ -#define CONFIG_SYS_FSL_DDR2 - -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -/* Fixed 512MB DDR2 parameters */ -#define CONFIG_SYS_SDRAM_SIZE_LOG 29 /* DDR is 512MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014102 -#define CONFIG_SYS_DDR_TIMING_3 0x00010000 -#define CONFIG_SYS_DDR_TIMING_0 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1 0x5c47a432 -#define CONFIG_SYS_DDR_TIMING_1_PERF 0x49352322 -#define CONFIG_SYS_DDR_TIMING_2 0x03984cce -#define CONFIG_SYS_DDR_TIMING_2_PERF 0x14904cca -#define CONFIG_SYS_DDR_MODE_1 0x00400442 -#define CONFIG_SYS_DDR_MODE_1_PERF 0x00480432 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_MODE_2_PERF 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x08200100 -#define CONFIG_SYS_DDR_INTERVAL_PERF 0x06180100 -#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 -#define CONFIG_SYS_DDR_CONTROL 0xc3008000 /* Type = DDR2 */ -#define CONFIG_SYS_DDR_CONTROL2 0x04400000 - -#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_SYS_MEMTEST_START 0x0ff00000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0ffffffc - -/* - * RAM definitions - */ -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ - - -/* - * FLASH on the Local Bus - * One bank, 128M, using the CFI driver. - */ -#define CONFIG_SYS_BOOT_BLOCK 0xf8000000 /* boot TLB block */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_BOOT_BLOCK /* start of FLASH 128M */ - -#ifdef CONFIG_PHYS_64BIT -# define CONFIG_SYS_FLASH_BASE_PHYS 0xff8000000ull -#else -# define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -/* 0xf8001801 */ -#define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ - | BR_PS_32 | BR_V) - -/* 0xf8006ff7 */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(128) | OR_GPCM_XAM | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 | OR_GPCM_TRLX \ - | OR_GPCM_EHTR | OR_GPCM_EAD) - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 -/* - * When initializing flash, if we cannot find the manufacturer ID, - * assume this is the AMD flash. - */ -#define CONFIG_ASSUME_AMD_FLASH - -/* - * Environment parameters - */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_USE_PPCENV -#define ENV_IS_EMBEDDED -#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K */ -#define CONFIG_ENV_SIZE 0x800 - -/* Environment at the start of flash sector, before text. */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE - CONFIG_ENV_SIZE) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#define CONFIG_SYS_TEXT_BASE 0xfffc0800 -#define CONFIG_SYS_LDSCRIPT "board/mercury/mpq101/u-boot.lds" - -/* - * Cypress CY7C67200 USB controller on the Local Bus. - * Not supported by u-boot at present. - */ -#define CONFIG_SYS_LBC_OPTION_BASE 0xf0000000 - -#ifdef CONFIG_PHYS_64BIT -# define CONFIG_SYS_LBC_OPTION_BASE_PHYS 0xff0000000ull -#else -# define CONFIG_SYS_LBC_OPTION_BASE_PHYS CONFIG_SYS_LBC_OPTION_BASE -#endif - -/* 0xf0001001 */ -#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_LBC_OPTION_BASE_PHYS) \ - | BR_PS_16 | BR_V) - -/* fffff002 */ -#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(0x8000) | OR_GPCM_XAM \ - | OR_GPCM_BCTLD | OR_GPCM_EHTR) - -/* - * Serial Ports - */ -#define CONFIG_CONS_INDEX 2 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, 9600, \ - 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* - * I2C buses and peripherals - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* I2C RTC - M41T81 */ -#define CONFIG_RTC_M41T62 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 2000 - -/* I2C EEPROM - 24C256 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_BUS_NUM 1 - -/* - * RapidIO MMU - */ -#ifdef CONFIG_SYS_SRIO -# define CONFIG_SRIO1 -# define CONFIG_SYS_SRIO1_MEM_VIRT 0xc0000000 -# define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ - -# ifdef CONFIG_PHYS_64BIT -# define CONFIG_SYS_SRIO1_MEM_PHYS 0xfc0000000ull -# else -# define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_VIRT -# endif -#endif - -/* - * Ethernet - */ -#ifdef CONFIG_TSEC_ENET - -# define CONFIG_MII /* MII PHY management */ -# define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ - -# define CONFIG_TSEC1 -# define CONFIG_TSEC1_NAME "eTSEC0" -# define TSEC1_PHY_ADDR 0x10 -# define TSEC1_PHYIDX 0 -# define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -# define CONFIG_TSEC2 -# define CONFIG_TSEC2_NAME "eTSEC1" -# define TSEC2_PHY_ADDR 0x11 -# define TSEC2_PHYIDX 0 -# define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -# define CONFIG_TSEC3 -# define CONFIG_TSEC3_NAME "eTSEC2" -# define TSEC3_PHY_ADDR 0x12 -# define TSEC3_PHYIDX 0 -# define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -# define CONFIG_TSEC4 -# define CONFIG_TSEC4_NAME "eTSEC3" -# define TSEC4_PHY_ADDR 0x13 -# define TSEC4_PHYIDX 0 -# define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -/* Options are: eTSEC[0-3] */ -# define CONFIG_ETHPRIME "eTSEC0" -# define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ -#endif - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_MII -#define CONFIG_CMD_ELF -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_JFFS2 - -/* - * Miscellaneous configurable options - */ - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - -#define CONFIG_FIT /* new uImage format support */ -#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - - -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ - -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "MPQ-101=> " /* Monitor Command Prompt */ - -/* Console I/O Buffer Size */ -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024 -#else -# define CONFIG_SYS_CBSIZE 256 -#endif - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16) - -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ - -#ifdef CONFIG_CMD_KGDB -# define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Basic Environment Configuration - */ -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ - -/*default location for tftp and bootm*/ -#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR - -#endif /* __CONFIG_H */ diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h deleted file mode 100644 index 2901ed1eeb..0000000000 --- a/include/configs/tb0229.h +++ /dev/null @@ -1,175 +0,0 @@ -/* - * (C) Copyright 2003 - * Masami Komiya - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Config header file for TANBAC TB0229 board using an VR4131 CPU module - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */ -#define CONFIG_TB0229 1 /* on a TB0229 Board */ - -#ifndef CPU_CLOCK_RATE -#define CPU_CLOCK_RATE 200000000 /* 200 MHz clock for the MIPS core */ -#endif -#define CPU_TCLOCK_RATE 16588800 /* 16.5888 MHz for TClock */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"boot\\\" for the network boot using DHCP, TFTP and NFS;" \ - "echo Type \\\"run netboot_initrd\\\" for the network boot with initrd;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo Type \\\"run flash_local\\\" to mount local root filesystem;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netboot=dhcp;tftp;run netargs; bootm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs ip=dhcp\0" \ - "localargs=setenv bootargs root=1F02 ip=dhcp\0" \ - "addmisc=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate} " \ - "read-only=readonly\0" \ - "netargs=run nfsargs addmisc\0" \ - "flash_nfs=run nfsargs addmisc;" \ - "bootm ${kernel_addr}\0" \ - "flash_local=run localargs addmisc;" \ - "bootm ${kernel_addr}\0" \ - "netboot_initrd=dhcp;tftp;tftp 80600000 initrd;" \ - "setenv bootargs root=/dev/ram ramdisk_size=8192 ip=dhcp;"\ - "run addmisc;" \ - "bootm 80400000 80600000\0" \ - "rootpath=/export/miniroot-mipsel\0" \ - "autoload=no\0" \ - "kernel_addr=BFC60000\0" \ - "ramdisk_addr=B0100000\0" \ - "u-boot=u-boot.bin\0" \ - "bootfile=uImage\0" \ - "load=dhcp;tftp 80400000 ${u-boot}\0" \ - "load_kernel=dhcp;tftp 80400000 ${bootfile}\0" \ - "update_uboot=run load;" \ - "protect off BFC00000 BFC3FFFF;" \ - "erase BFC00000 BFC3FFFF;" \ - "cp.b 80400000 BFC00000 ${filesize}\0" \ - "update_kernel=run load_kernel;" \ - "erase BFC60000 BFD5FFFF;" \ - "cp.b 80400000 BFC60000 ${filesize}\0" \ - "initenv=erase bfc40000 bfc5ffff\0" \ - "" -/*#define CONFIG_BOOTCOMMAND "run flash_local" */ -#define CONFIG_BOOTCOMMAND "run netboot" - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_PCI -#define CONFIG_CMD_ELF - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "# " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ - -#define CONFIG_SYS_MALLOC_LEN 128*1024 - -#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 - -#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_TCLOCK_RATE/4) - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 - -#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */ - -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END 0x80800000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -#define PHYS_FLASH_1 0xbfc00000 /* Flash Bank #1 */ - -/* The following #defines are needed to get flash environment right */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) - -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR 0xBFC40000 -#define CONFIG_ENV_SIZE 0x20000 - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -#define CONFIG_NR_DRAM_BANKS 1 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_DCACHE_SIZE 16384 -#define CONFIG_SYS_ICACHE_SIZE 16384 -#define CONFIG_SYS_CACHELINE_SIZE 16 - -/*----------------------------------------------------------------------- - * Serial Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK 18432000 -#define CONFIG_SYS_NS16550_COM1 0xaf000800 - -/*----------------------------------------------------------------------- - * PCI stuff - */ -#define CONFIG_PCI -#define CONFIG_PCI_PNP -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - -#define CONFIG_RTL8139 - -#endif /* __CONFIG_H */ diff --git a/include/cramfs/cramfs_fs_sb.h b/include/cramfs/cramfs_fs_sb.h deleted file mode 100644 index bc23f94b94..0000000000 --- a/include/cramfs/cramfs_fs_sb.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _CRAMFS_FS_SB -#define _CRAMFS_FS_SB - -/* - * cramfs super-block data in memory - */ -struct cramfs_sb_info { - unsigned long magic; - unsigned long size; - unsigned long blocks; - unsigned long files; - unsigned long flags; -#ifdef CONFIG_CRAMFS_LINEAR - unsigned long linear_phys_addr; - char * linear_virt_addr; -#endif -}; - -#endif diff --git a/include/da9030.h b/include/da9030.h deleted file mode 100644 index 275d6813b0..0000000000 --- a/include/da9030.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * (C) Copyright 2006 DENX Software Engineering - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* DA9030 register definitions */ -#define CID 0x00 -#define EVENT_A 0x01 -#define EVENT_B 0x02 -#define EVENT_C 0x03 -#define STATUS 0x04 -#define IRQ_MASK_A 0x05 -#define IRQ_MASK_B 0x06 -#define IRQ_MASK_C 0x07 -#define SYS_CONTROL_A 0x08 -#define SYS_CONTROL_B 0x09 -#define FAULT_LOG 0x0A -#define LDO_10_11 0x10 -#define LDO_15 0x11 -#define LDO_14_16 0x12 -#define LDO_18_19 0x13 -#define LDO_17_SIMCP0 0x14 -#define BUCK2_DVC1 0x15 -#define BUCK2_DVC2 0x16 -#define REG_CONTROL_1_17 0x17 -#define REG_CONTROL_2_18 0x18 -#define USBPUMP 0x19 -#define SLEEP_CONTROL 0x1A -#define STARTUP_CONTROL 0x1B -#define LED1_CONTROL 0x20 -#define LED2_CONTROL 0x21 -#define LED3_CONTROL 0x22 -#define LED4_CONTROL 0x23 -#define LEDPC_CONTROL 0x24 -#define WLED_CONTROL 0x25 -#define MISC_CONTROLA 0x26 -#define MISC_CONTROLB 0x27 -#define CHARGE_CONTROL 0x28 -#define CCTR_CONTROL 0x29 -#define TCTR_CONTROL 0x2A -#define CHARGE_PULSE 0x2B - -/* ... some missing ...*/ - -#define LDO1 0x90 -#define LDO2_3 0x91 -#define LDO4_5 0x92 -#define LDO6_SIMCP 0x93 -#define LDO7_8 0x94 -#define LDO9_12 0x95 -#define BUCK 0x96 -#define REG_CONTROL_1_97 0x97 -#define REG_CONTROL_2_98 0x98 -#define REG_SLEEP_CONTROL1 0x99 -#define REG_SLEEP_CONTROL2 0x9A -#define REG_SLEEP_CONTROL3 0x9B -#define ADC_MAN_CONTROL 0xA0 -#define ADC_AUTO_CONTROL 0xA1 -#define VBATMON 0xA2 -#define VBATMONTXMON 0xA3 -#define TBATHIGHP 0xA4 -#define TBATHIGHN 0xA5 -#define TBATLOW 0xA6 -#define MAN_RES 0xB0 -#define VBAT_RES 0xB1 -#define VBATMIN_RES 0xB2 -#define VBATMINTXON_RES 0xB3 -#define ICHMAX_RES 0xB4 -#define ICHMIN_RES 0xB5 -#define ICHAVERAGE_RES 0xB6 -#define VCHMAX_RES 0xB7 -#define VCHMIN_RES 0xB8 -#define TBAT_RES 0xB9 -#define ADC_IN4_RES 0xBA - -#define STATUS_ONKEY_N 0x1 /* current ONKEY_N value */ -#define STATUS_PWREN1 (1<<1) /* PWREN1 value */ -#define STATUS_EXTON (1<<2) /* EXTON value */ -#define STATUS_CHDET (1<<3) /* Charger detection status */ -#define STATUS_TBAT (1<<4) /* Battery over/under temperature status */ -#define STATUS_VBATMON (1<<5) /* VBATMON comparison status */ -#define STATUS_VBATMONTXON (1<<6) /* VBATMONTXON comparison status */ -#define STATUS_CHIOVER (1<<7) /* Charge overcurrent */ - -#define SYS_CONTROL_A_SLEEP_N_PIN_ENABLE 0x1 -#define SYS_CONTROL_A_SHUT_DOWN (1<<1) -#define SYS_CONTROL_A_HWRES_ENABLE (1<<2) -#define SYS_CONTROL_A_WDOG_ACTION (1<<3) -#define SYS_CONTROL_A_WATCHDOG (1<<7) - -#define MISC_CONTROLB_USB_INT_RISING (1<<2) -#define MISC_CONTROLB_SESSION_VALID_EN (1<<3) - -#define USB_PUMP_USBVE (1<<0) -#define USB_PUMP_USBVEP (1<<1) -#define USB_PUMP_SRP_DETECT (1<<2) -#define USB_PUMP_SESSION_VALID (1<<3) -#define USB_PUMP_VBUS_VALID_4_0 (1<<4) -#define USB_PUMP_VBUS_VALID_4_4 (1<<5) -#define USB_PUMP_EN_USBVE (1<<6) -#define USB_PUMP_EN_USBVEP (1<<7) diff --git a/include/dm9161.h b/include/dm9161.h deleted file mode 100644 index bd85e4287e..0000000000 --- a/include/dm9161.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * NOTE: DAVICOM ethernet Physical layer - * - * Version: @(#)DM9161.h 1.0.0 01/10/2001 - * - * Authors: ATMEL Rousset - * - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -/* DAVICOM PHYSICAL LAYER TRANSCEIVER DM9161 */ - -#define DM9161_BMCR 0 /* Basic Mode Control Register */ -#define DM9161_BMSR 1 /* Basic Mode Status Register */ -#define DM9161_PHYID1 2 /* PHY Idendifier Register 1 */ -#define DM9161_PHYID2 3 /* PHY Idendifier Register 2 */ -#define DM9161_ANAR 4 /* Auto_Negotiation Advertisement Register */ -#define DM9161_ANLPAR 5 /* Auto_negotiation Link Partner Ability Register */ -#define DM9161_ANER 6 /* Auto-negotiation Expansion Register */ -#define DM9161_DSCR 16 /* Specified Configuration Register */ -#define DM9161_DSCSR 17 /* Specified Configuration and Status Register */ -#define DM9161_10BTCSR 18 /* 10BASE-T Configuration and Satus Register */ -#define DM9161_MDINTR 21 /* Specified Interrupt Register */ -#define DM9161_RECR 22 /* Specified Receive Error Counter Register */ -#define DM9161_DISCR 23 /* Specified Disconnect Counter Register */ -#define DM9161_RLSR 24 /* Hardware Reset Latch State Register */ - - -/* --Bit definitions: DM9161_BMCR */ -#define DM9161_RESET (1 << 15) /* 1= Software Reset; 0=Normal Operation */ -#define DM9161_LOOPBACK (1 << 14) /* 1=loopback Enabled; 0=Normal Operation */ -#define DM9161_SPEED_SELECT (1 << 13) /* 1=100Mbps; 0=10Mbps */ -#define DM9161_AUTONEG (1 << 12) -#define DM9161_POWER_DOWN (1 << 11) -#define DM9161_ISOLATE (1 << 10) -#define DM9161_RESTART_AUTONEG (1 << 9) -#define DM9161_DUPLEX_MODE (1 << 8) -#define DM9161_COLLISION_TEST (1 << 7) - -/*--Bit definitions: DM9161_BMSR */ -#define DM9161_100BASE_TX (1 << 15) -#define DM9161_100BASE_TX_FD (1 << 14) -#define DM9161_100BASE_TX_HD (1 << 13) -#define DM9161_10BASE_T_FD (1 << 12) -#define DM9161_10BASE_T_HD (1 << 11) -#define DM9161_MF_PREAMB_SUPPR (1 << 6) -#define DM9161_AUTONEG_COMP (1 << 5) -#define DM9161_REMOTE_FAULT (1 << 4) -#define DM9161_AUTONEG_ABILITY (1 << 3) -#define DM9161_LINK_STATUS (1 << 2) -#define DM9161_JABBER_DETECT (1 << 1) -#define DM9161_EXTEND_CAPAB (1 << 0) - -/*--definitions: DM9161_PHYID1 */ -#define DM9161_PHYID1_OUI 0x606E -#define DM9161_LSB_MASK 0x3F - -/*--Bit definitions: DM9161_ANAR, DM9161_ANLPAR */ -#define DM9161_NP (1 << 15) -#define DM9161_ACK (1 << 14) -#define DM9161_RF (1 << 13) -#define DM9161_FCS (1 << 10) -#define DM9161_T4 (1 << 9) -#define DM9161_TX_FDX (1 << 8) -#define DM9161_TX_HDX (1 << 7) -#define DM9161_10_FDX (1 << 6) -#define DM9161_10_HDX (1 << 5) -#define DM9161_AN_IEEE_802_3 0x0001 - -/*--Bit definitions: DM9161_ANER */ -#define DM9161_PDF (1 << 4) -#define DM9161_LP_NP_ABLE (1 << 3) -#define DM9161_NP_ABLE (1 << 2) -#define DM9161_PAGE_RX (1 << 1) -#define DM9161_LP_AN_ABLE (1 << 0) - -/*--Bit definitions: DM9161_DSCR */ -#define DM9161_BP4B5B (1 << 15) -#define DM9161_BP_SCR (1 << 14) -#define DM9161_BP_ALIGN (1 << 13) -#define DM9161_BP_ADPOK (1 << 12) -#define DM9161_REPEATER (1 << 11) -#define DM9161_TX (1 << 10) -#define DM9161_RMII_ENABLE (1 << 8) -#define DM9161_F_LINK_100 (1 << 7) -#define DM9161_SPLED_CTL (1 << 6) -#define DM9161_COLLED_CTL (1 << 5) -#define DM9161_RPDCTR_EN (1 << 4) -#define DM9161_SM_RST (1 << 3) -#define DM9161_MFP SC (1 << 2) -#define DM9161_SLEEP (1 << 1) -#define DM9161_RLOUT (1 << 0) - -/*--Bit definitions: DM9161_DSCSR */ -#define DM9161_100FDX (1 << 15) -#define DM9161_100HDX (1 << 14) -#define DM9161_10FDX (1 << 13) -#define DM9161_10HDX (1 << 12) - -/*--Bit definitions: DM9161_10BTCSR */ -#define DM9161_LP_EN (1 << 14) -#define DM9161_HBE (1 << 13) -#define DM9161_SQUELCH (1 << 12) -#define DM9161_JABEN (1 << 11) -#define DM9161_10BT_SER (1 << 10) -#define DM9161_POLR (1 << 0) - - -/*--Bit definitions: DM9161_MDINTR */ -#define DM9161_INTR_PEND (1 << 15) -#define DM9161_FDX_MASK (1 << 11) -#define DM9161_SPD_MASK (1 << 10) -#define DM9161_LINK_MASK (1 << 9) -#define DM9161_INTR_MASK (1 << 8) -#define DM9161_FDX_CHANGE (1 << 4) -#define DM9161_SPD_CHANGE (1 << 3) -#define DM9161_LINK_CHANGE (1 << 2) -#define DM9161_INTR_STATUS (1 << 0) - - -/****************** function prototypes **********************/ -unsigned int dm9161_IsPhyConnected(AT91PS_EMAC p_mac); -unsigned char dm9161_GetLinkSpeed(AT91PS_EMAC p_mac); -unsigned char dm9161_AutoNegotiate(AT91PS_EMAC p_mac, int *status); -unsigned char dm9161_InitPhy(AT91PS_EMAC p_mac); diff --git a/include/faraday/ftsdc021.h b/include/faraday/ftsdc021.h deleted file mode 100644 index de8e250839..0000000000 --- a/include/faraday/ftsdc021.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * (C) Copyright 2013 Faraday Technology - * Dante Su - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __FTSDC021_H -#define __FTSDC021_H - -int ftsdc021_sdhci_init(u32 regbase); - -#endif /* __FTSDC021_H */ diff --git a/include/ks8721.h b/include/ks8721.h deleted file mode 100644 index 90ed178087..0000000000 --- a/include/ks8721.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * NOTE: MICREL ethernet Physical layer - * - * Version: KS8721.h - * - * Authors: Eric Benard (based on dm9161.h) - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* MICREL PHYSICAL LAYER TRANSCEIVER KS8721 */ - -#define KS8721_BMCR 0 -#define KS8721_BMSR 1 -#define KS8721_PHYID1 2 -#define KS8721_PHYID2 3 -#define KS8721_ANAR 4 -#define KS8721_ANLPAR 5 -#define KS8721_ANER 6 -#define KS8721_RECR 15 -#define KS8721_MDINTR 27 -#define KS8721_100BT 31 - -/* --Bit definitions: KS8721_BMCR */ -#define KS8721_RESET (1 << 15) -#define KS8721_LOOPBACK (1 << 14) -#define KS8721_SPEED_SELECT (1 << 13) -#define KS8721_AUTONEG (1 << 12) -#define KS8721_POWER_DOWN (1 << 11) -#define KS8721_ISOLATE (1 << 10) -#define KS8721_RESTART_AUTONEG (1 << 9) -#define KS8721_DUPLEX_MODE (1 << 8) -#define KS8721_COLLISION_TEST (1 << 7) -#define KS8721_DISABLE (1 << 0) - -/*--Bit definitions: KS8721_BMSR */ -#define KS8721_100BASE_T4 (1 << 15) -#define KS8721_100BASE_TX_FD (1 << 14) -#define KS8721_100BASE_T4_HD (1 << 13) -#define KS8721_10BASE_T_FD (1 << 12) -#define KS8721_10BASE_T_HD (1 << 11) -#define KS8721_MF_PREAMB_SUPPR (1 << 6) -#define KS8721_AUTONEG_COMP (1 << 5) -#define KS8721_REMOTE_FAULT (1 << 4) -#define KS8721_AUTONEG_ABILITY (1 << 3) -#define KS8721_LINK_STATUS (1 << 2) -#define KS8721_JABBER_DETECT (1 << 1) -#define KS8721_EXTEND_CAPAB (1 << 0) - -/*--Bit definitions: KS8721_PHYID */ -#define KS8721_PHYID_OUI 0x0885 -#define KS8721_LSB_MASK 0x3F - -#define KS8721BL_MODEL 0x21 -#define KS8721_MODELMASK 0x3F0 -#define KS8721BL_REV 0x9 -#define KS8721_REVMASK 0xF - -/*--Bit definitions: KS8721_ANAR, KS8721_ANLPAR */ -#define KS8721_NP (1 << 15) -#define KS8721_ACK (1 << 14) -#define KS8721_RF (1 << 13) -#define KS8721_PAUSE (1 << 10) -#define KS8721_T4 (1 << 9) -#define KS8721_TX_FDX (1 << 8) -#define KS8721_TX_HDX (1 << 7) -#define KS8721_10_FDX (1 << 6) -#define KS8721_10_HDX (1 << 5) -#define KS8721_AN_IEEE_802_3 0x0001 - -/****************** function prototypes **********************/ -unsigned int ks8721_isphyconnected(AT91PS_EMAC p_mac); -unsigned char ks8721_getlinkspeed(AT91PS_EMAC p_mac); -unsigned char ks8721_autonegotiate(AT91PS_EMAC p_mac, int *status); -unsigned char ks8721_initphy(AT91PS_EMAC p_mac); diff --git a/include/linux/mtd/inftl-user.h b/include/linux/mtd/inftl-user.h deleted file mode 100644 index 45220ed76f..0000000000 --- a/include/linux/mtd/inftl-user.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * $Id: inftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $ - * - * Parts of INFTL headers shared with userspace - * - */ - -#ifndef __MTD_INFTL_USER_H__ -#define __MTD_INFTL_USER_H__ - -#define OSAK_VERSION 0x5120 -#define PERCENTUSED 98 - -#define SECTORSIZE 512 - -/* Block Control Information */ - -struct inftl_bci { - uint8_t ECCsig[6]; - uint8_t Status; - uint8_t Status1; -} __attribute__((packed)); - -struct inftl_unithead1 { - uint16_t virtualUnitNo; - uint16_t prevUnitNo; - uint8_t ANAC; - uint8_t NACs; - uint8_t parityPerField; - uint8_t discarded; -} __attribute__((packed)); - -struct inftl_unithead2 { - uint8_t parityPerField; - uint8_t ANAC; - uint16_t prevUnitNo; - uint16_t virtualUnitNo; - uint8_t NACs; - uint8_t discarded; -} __attribute__((packed)); - -struct inftl_unittail { - uint8_t Reserved[4]; - uint16_t EraseMark; - uint16_t EraseMark1; -} __attribute__((packed)); - -union inftl_uci { - struct inftl_unithead1 a; - struct inftl_unithead2 b; - struct inftl_unittail c; -}; - -struct inftl_oob { - struct inftl_bci b; - union inftl_uci u; -}; - - -/* INFTL Media Header */ - -struct INFTLPartition { - __u32 virtualUnits; - __u32 firstUnit; - __u32 lastUnit; - __u32 flags; - __u32 spareUnits; - __u32 Reserved0; - __u32 Reserved1; -} __attribute__((packed)); - -struct INFTLMediaHeader { - char bootRecordID[8]; - __u32 NoOfBootImageBlocks; - __u32 NoOfBinaryPartitions; - __u32 NoOfBDTLPartitions; - __u32 BlockMultiplierBits; - __u32 FormatFlags; - __u32 OsakVersion; - __u32 PercentUsed; - struct INFTLPartition Partitions[4]; -} __attribute__((packed)); - -/* Partition flag types */ -#define INFTL_BINARY 0x20000000 -#define INFTL_BDTL 0x40000000 -#define INFTL_LAST 0x80000000 - -#endif /* __MTD_INFTL_USER_H__ */ diff --git a/include/linux/mtd/jffs2-user.h b/include/linux/mtd/jffs2-user.h deleted file mode 100644 index d508ef0ae0..0000000000 --- a/include/linux/mtd/jffs2-user.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * $Id: jffs2-user.h,v 1.1 2004/05/05 11:57:54 dwmw2 Exp $ - * - * JFFS2 definitions for use in user space only - */ - -#ifndef __JFFS2_USER_H__ -#define __JFFS2_USER_H__ - -/* This file is blessed for inclusion by userspace */ -#include -#include -#include - -#undef cpu_to_je16 -#undef cpu_to_je32 -#undef cpu_to_jemode -#undef je16_to_cpu -#undef je32_to_cpu -#undef jemode_to_cpu - -extern int target_endian; - -#define t16(x) ({ uint16_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_16(__b); }) -#define t32(x) ({ uint32_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_32(__b); }) - -#define cpu_to_je16(x) ((jint16_t){t16(x)}) -#define cpu_to_je32(x) ((jint32_t){t32(x)}) -#define cpu_to_jemode(x) ((jmode_t){t32(x)}) - -#define je16_to_cpu(x) (t16((x).v16)) -#define je32_to_cpu(x) (t32((x).v32)) -#define jemode_to_cpu(x) (t32((x).m)) - -#endif /* __JFFS2_USER_H__ */ diff --git a/include/smiLynxEM.h b/include/smiLynxEM.h deleted file mode 100644 index c020115f86..0000000000 --- a/include/smiLynxEM.h +++ /dev/null @@ -1,163 +0,0 @@ -/* - * (C) Copyright 1997-2002 ELTEC Elektronik AG - * Frank Gottschling - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * smiLynxEM.h - * Silicon Motion graphic interface for sm810/sm710/sm712 accelerator - * - * - * modification history - * -------------------- - * 04-18-2002 Rewritten for U-Boot . - */ - -#ifndef _SMI_LYNX_EM_H_ -#define _SMI_LYNX_EM_H_ - -/* - * SMI 710/712 have 4MB internal RAM; SMI 810 2MB internal + 2MB external - */ -#define VIDEO_MEM_SIZE 0x400000 - -/* - * Supported video modes for SMI Lynx E/EM/EM+ - */ -#define VIDEO_MODES 7 -#define DUAL_800_600 0 /* SMI710:VGA1:75Hz (pitch=1600) */ - /* VGA2:60/120Hz (pitch=1600) */ - /* SMI810:VGA1:75Hz (pitch=1600) */ - /* VGA2:75Hz (pitch=1600) */ -#define DUAL_1024_768 1 /* VGA1:75Hz VGA2:73Hz (pitch=2048) */ -#define SINGLE_800_600 2 /* VGA1:75Hz (pitch=800) */ -#define SINGLE_1024_768 3 /* VGA1:75Hz (pitch=1024) */ -#define SINGLE_1280_1024 4 /* VGA1:75Hz (pitch=1280) */ -#define TV_MODE_CCIR 5 /* VGA1:50Hz (h=720;v=576;pitch=720) */ -#define TV_MODE_EIA 6 /* VGA1:60Hz (h=720;v=484;pitch=720) */ - - -/* - * ISA mapped regs - */ -#define SMI_INDX_C4 (pGD->isaBase + 0x03c4) /* index reg */ -#define SMI_DATA_C5 (pGD->isaBase + 0x03c5) /* data reg */ -#define SMI_INDX_D4 (pGD->isaBase + 0x03d4) /* index reg */ -#define SMI_DATA_D5 (pGD->isaBase + 0x03d5) /* data reg */ -#define SMI_INDX_CE (pGD->isaBase + 0x03ce) /* index reg */ -#define SMI_DATA_CF (pGD->isaBase + 0x03cf) /* data reg */ -#define SMI_LOCK_REG (pGD->isaBase + 0x03c3) /* unlock/lock ext crt reg */ -#define SMI_MISC_REG (pGD->isaBase + 0x03c2) /* misc reg */ -#define SMI_LUT_MASK (pGD->isaBase + 0x03c6) /* lut mask reg */ -#define SMI_LUT_START (pGD->isaBase + 0x03c8) /* lut start index */ -#define SMI_LUT_RGB (pGD->isaBase + 0x03c9) /* lut colors auto incr.*/ - - -/* - * Video processor control - */ -typedef struct { - unsigned int control; - unsigned int colorKey; - unsigned int colorKeyMask; - unsigned int start; - unsigned short offset; - unsigned short width; - unsigned int fifoPrio; - unsigned int fifoERL; - unsigned int YUVtoRGB; -} SmiVideoProc; - -/* - * Video window control - */ -typedef struct { - unsigned short top; - unsigned short left; - unsigned short bottom; - unsigned short right; - unsigned int srcStart; - unsigned short width; - unsigned short offset; - unsigned char hStretch; - unsigned char vStretch; -} SmiVideoWin; - -/* - * Capture port control - */ -typedef struct { - unsigned int control; - unsigned short topClip; - unsigned short leftClip; - unsigned short srcHeight; - unsigned short srcWidth; - unsigned int srcBufStart1; - unsigned int srcBufStart2; - unsigned short srcOffset; - unsigned short fifoControl; -} SmiCapturePort; - - -/******************************************************************************/ -/* Export Graphic Driver Control */ -/******************************************************************************/ - -typedef struct { - unsigned int isaBase; - unsigned int pciBase; - unsigned int dprBase; - unsigned int vprBase; - unsigned int cprBase; - unsigned int frameAdrs; - unsigned int memSize; - unsigned int mode; - unsigned int gdfIndex; - unsigned int gdfBytesPP; - unsigned int fg; - unsigned int bg; - unsigned int plnSizeX; - unsigned int plnSizeY; - unsigned int winSizeX; - unsigned int winSizeY; - char modeIdent[80]; -} GraphicDevice; - -extern GraphicDevice smi; - - -/******************************************************************************/ -/* Export Graphic Functions */ -/******************************************************************************/ - -void *video_hw_init (void); /* returns GraphicDevice struct or NULL */ - -void video_hw_bitblt ( - unsigned int bpp, /* bytes per pixel */ - unsigned int src_x, /* source pos x */ - unsigned int src_y, /* source pos y */ - unsigned int dst_x, /* dest pos x */ - unsigned int dst_y, /* dest pos y */ - unsigned int dim_x, /* frame width */ - unsigned int dim_y /* frame height */ - ); - -void video_hw_rectfill ( - unsigned int bpp, /* bytes per pixel */ - unsigned int dst_x, /* dest pos x */ - unsigned int dst_y, /* dest pos y */ - unsigned int dim_x, /* frame width */ - unsigned int dim_y, /* frame height */ - unsigned int color /* fill color */ - ); - -void video_set_lut ( - unsigned int index, /* color number */ - unsigned char r, /* red */ - unsigned char g, /* green */ - unsigned char b /* blue */ - ); - -#endif /*_SMI_LYNX_EM_H_ */ -- 2.25.1