From 3a7f25b7653a00f8dad40a42a68da9d7b8a7a81d Mon Sep 17 00:00:00 2001 From: Joris Offouga Date: Mon, 23 Sep 2019 14:54:41 +0200 Subject: [PATCH] pico-imx7d: Remove dead code for dm_video Since convert dm_video, unused code introduced, so remove this Signed-off-by: Joris Offouga Reviewed-by: Otavio Salvador --- arch/arm/dts/imx7d-pico-u-boot.dtsi | 37 ------------------------ board/technexion/pico-imx7d/pico-imx7d.c | 12 -------- 2 files changed, 49 deletions(-) diff --git a/arch/arm/dts/imx7d-pico-u-boot.dtsi b/arch/arm/dts/imx7d-pico-u-boot.dtsi index ef19de2b30..7307fbaf68 100644 --- a/arch/arm/dts/imx7d-pico-u-boot.dtsi +++ b/arch/arm/dts/imx7d-pico-u-boot.dtsi @@ -4,37 +4,6 @@ usb0 = &usbotg1; display0 = &lcdif; }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_backlight>; - pwms = <&pwm4 0 50000 0>; - brightness-levels = <0 36 72 108 144 180 216 255>; - default-brightness-level = <6>; - status = "okay"; - }; - - reg_lcd_3v3: regulator-lcd-3v3 { - compatible = "regulator-fixed"; - regulator-name = "lcd-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - panel { - compatible = "vxt,vl050-8048nt-c01"; - backlight = <&backlight>; - power-supply = <®_lcd_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; - }; }; &usbotg1 { @@ -48,12 +17,6 @@ display = <&display0>; u-boot,dm-pre-reloc; - port { - display_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - display0: display { bits-per-pixel = <16>; bus-width = <24>; diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c index 32b04b8fd6..bfa3c3c87f 100644 --- a/board/technexion/pico-imx7d/pico-imx7d.c +++ b/board/technexion/pico-imx7d/pico-imx7d.c @@ -33,13 +33,6 @@ DECLARE_GLOBAL_DATA_PTR; #define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM) - -#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \ - PAD_CTL_DSE_3P3V_49OHM) - -#define LCD_SYNC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \ - PAD_CTL_DSE_3P3V_196OHM) - #ifdef CONFIG_SYS_I2C_MXC #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) @@ -224,13 +217,8 @@ int board_early_init_f(void) } #ifdef CONFIG_DM_VIDEO -static iomux_v3_cfg_t const lcd_pads[] = { - MX7D_PAD_GPIO1_IO11__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - void setup_lcd(void) { - imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); gpio_request(IMX_GPIO_NR(1, 11), "lcd_brightness"); gpio_request(IMX_GPIO_NR(1, 6), "lcd_enable"); /* Set Brightness to high */ -- 2.25.1