From 3a532346fcf2aacc52351e3cb39f9c7a4850f70d Mon Sep 17 00:00:00 2001 From: Gerlando Falauto Date: Fri, 27 Jul 2012 05:16:38 +0000 Subject: [PATCH] powerpc/82xx: add SDRAM detection for km82xx This patch adds SDRAM detection feature to km82xx boards. To enable this feature, define CONFIG_SYS_SDRAM_LIST as the initializer for an array of struct sdram_conf_s. These structs will expose the bitfields within registers PSDMR and OR1 which have to be different between configurations; common bitfields will be defined, as usual, within CONFIG_SYS_PSDMR and CONFIG_SYS_OR1. If CONFIG_SYS_SDRAM_LIST is not defined, then the usual behavior is retained. Signed-off-by: Gerlando Falauto --- board/keymile/km82xx/km82xx.c | 51 +++++++++++++++++++++++++++++++++-- 1 file changed, 49 insertions(+), 2 deletions(-) diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c index 0e50b0bfa0..67b69f6cb3 100644 --- a/board/keymile/km82xx/km82xx.c +++ b/board/keymile/km82xx/km82xx.c @@ -261,6 +261,54 @@ static long int try_init(memctl8260_t *memctl, ulong sdmr, return size; } +#ifdef CONFIG_SYS_SDRAM_LIST + +/* + * If CONFIG_SYS_SDRAM_LIST is defined, we cycle through all SDRAM + * configurations therein (should be from high to lower) to find the + * one actually matching the current configuration. + * CONFIG_SYS_PSDMR and CONFIG_SYS_OR1 will contain the base values which are + * common among all possible configurations; values in CONFIG_SYS_SDRAM_LIST + * (defined as the initialization value for the array of struct sdram_conf_s) + * will then be ORed with such base values. + */ + +struct sdram_conf_s { + ulong size; + int or1; + int psdmr; +}; + +static struct sdram_conf_s sdram_conf[] = CONFIG_SYS_SDRAM_LIST; + +static long probe_sdram(memctl8260_t *memctl) +{ + int n = 0; + long psize = 0; + + for (n = 0; n < ARRAY_SIZE(sdram_conf); psize = 0, n++) { + psize = try_init(memctl, + CONFIG_SYS_PSDMR | sdram_conf[n].psdmr, + CONFIG_SYS_OR1 | sdram_conf[n].or1, + (uchar *) CONFIG_SYS_SDRAM_BASE); + debug("Probing %ld bytes returned %ld\n", + sdram_conf[n].size, psize); + if (psize == sdram_conf[n].size) + break; + } + return psize; +} + +#else /* CONFIG_SYS_SDRAM_LIST */ + +static long probe_sdram(memctl8260_t *memctl) +{ + return try_init(memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1, + (uchar *) CONFIG_SYS_SDRAM_BASE); +} +#endif /* CONFIG_SYS_SDRAM_LIST */ + + phys_size_t initdram(int board_type) { immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; @@ -274,8 +322,7 @@ phys_size_t initdram(int board_type) #ifndef CONFIG_SYS_RAMBOOT /* 60x SDRAM setup: */ - psize = try_init(memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1, - (uchar *) CONFIG_SYS_SDRAM_BASE); + psize = probe_sdram(memctl); #endif /* CONFIG_SYS_RAMBOOT */ icache_enable(); -- 2.25.1