From 371fc580d244aa81dd315c3bf16bca6c3607cae6 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 12 Jan 2016 08:06:36 +0100 Subject: [PATCH] ARM: zynq: Extend microzed board support Add missing DT nodes and enable USB. Signed-off-by: Michal Simek Reviewed-by: Nathan Rossi --- arch/arm/dts/zynq-microzed.dts | 38 ++++++++++++++++++++++++++++++++- configs/zynq_microzed_defconfig | 4 ++++ include/configs/zynq_microzed.h | 2 ++ 3 files changed, 43 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts index 793ab44eae..cb238cd5e7 100644 --- a/arch/arm/dts/zynq-microzed.dts +++ b/arch/arm/dts/zynq-microzed.dts @@ -1,7 +1,7 @@ /* * Xilinx MicroZED board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2013 - 2016 Xilinx, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -15,12 +15,27 @@ aliases { serial0 = &uart1; spi0 = &qspi; + mmc0 = &sdhci0; }; memory { device_type = "memory"; reg = <0 0x40000000>; }; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; }; &qspi { @@ -32,3 +47,24 @@ u-boot,dm-pre-reloc; status = "okay"; }; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&sdhci0 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +}; diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 1d70e43df0..bd261c16eb 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -21,3 +21,7 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_ZYNQ_GEM=y CONFIG_ZYNQ_QSPI=y +CONFIG_USB=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h index e66088da4f..ec7bb1cef5 100644 --- a/include/configs/zynq_microzed.h +++ b/include/configs/zynq_microzed.h @@ -12,6 +12,8 @@ #define CONFIG_SYS_NO_FLASH +#define CONFIG_ZYNQ_USB + #include #endif /* __CONFIG_ZYNQ_MICROZED_H */ -- 2.25.1