From 328ce7fd505288949d83b72562586a139e025549 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 30 Nov 2016 16:54:34 +0800 Subject: [PATCH] sunxi: Set PLL lock enable bits for R40 According to the BSP released by Banana Pi, the R40 (sun8iw11p1) has an extra "PLL lock control" register in the CCU, which controls whether the individual PLL lock status bits in each PLL's control register work or not. This patch enables it for all the PLLs. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard --- arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 2 ++ arch/arm/mach-sunxi/clock_sun6i.c | 5 +++++ 2 files changed, 7 insertions(+) diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index 1bfb48bd52..1aefd5a64c 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -142,6 +142,8 @@ struct sunxi_ccm_reg { u32 apb2_reset_cfg; /* 0x2d8 APB2 Reset config */ u32 reserved25[5]; u32 ccu_sec_switch; /* 0x2f0 CCU Security Switch, H3 only */ + u32 reserved26[11]; + u32 pll_lock_ctrl; /* 0x320 PLL lock control, R40 only */ }; /* apb2 bit field */ diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c index 4762fbf0c3..3c8c53fcf7 100644 --- a/arch/arm/mach-sunxi/clock_sun6i.c +++ b/arch/arm/mach-sunxi/clock_sun6i.c @@ -35,6 +35,11 @@ void clock_init_safe(void) clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK); #endif +#ifdef CONFIG_MACH_SUN8I_R40 + /* Set PLL lock enable bits and switch to old lock mode */ + writel(GENMASK(12, 0), &ccm->pll_lock_ctrl); +#endif + clock_set_pll1(408000000); writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); -- 2.25.1