From 313407468f8746aac62365b316d7dc3cd732e5b8 Mon Sep 17 00:00:00 2001 From: wdenk Date: Tue, 1 Oct 2002 01:07:28 +0000 Subject: [PATCH] Das U-Boot: Universal Boot Loader --- common/cmd_spi.c | 116 ++++++++++++++++++++++++++++ common/soft_spi.c | 138 +++++++++++++++++++++++++++++++++ cpu/mpc8260/status_led.c | 160 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 414 insertions(+) create mode 100644 common/cmd_spi.c create mode 100644 common/soft_spi.c create mode 100644 cpu/mpc8260/status_led.c diff --git a/common/cmd_spi.c b/common/cmd_spi.c new file mode 100644 index 0000000000..ccf9cc2879 --- /dev/null +++ b/common/cmd_spi.c @@ -0,0 +1,116 @@ +/* + * (C) Copyright 2002 + * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * SPI Read/Write Utilities + */ + +#include +#include +#include +#include + +#if (CONFIG_COMMANDS & CFG_CMD_SPI) + +#define MAX_SPI_BYTES 32 /* max number of bytes we can handle */ + +/* + * External table of chip select functions (see the appropriate board + * support for the actual definition of the table). + */ +extern spi_chipsel_type spi_chipsel[]; + + +/* + * Values from last command. + */ +static int device; +static int bitlen; +static uchar dout[MAX_SPI_BYTES]; +static uchar din[MAX_SPI_BYTES]; + +/* + * SPI read/write + * + * Syntax: + * spi {dev} {num_bits} {dout} + * {dev} is the device number for controlling chip select (see TBD) + * {num_bits} is the number of bits to send & receive (base 10) + * {dout} is a hexadecimal string of data to send + * The command prints out the hexadecimal string received via SPI. + */ + +int do_spi (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) +{ + char *cp = 0; + uchar tmp; + int j; + int rcode = 0; + + /* + * We use the last specified parameters, unless new ones are + * entered. + */ + + if ((flag & CMD_FLAG_REPEAT) == 0) + { + if (argc >= 2) + device = simple_strtoul(argv[1], NULL, 10); + if (argc >= 3) + bitlen = simple_strtoul(argv[2], NULL, 10); + if (argc >= 4) + cp = argv[3]; + for(j = 0; *cp; j++, cp++) { + tmp = *cp - '0'; + if(tmp > 9) + tmp -= ('A' - '0') - 10; + if(tmp > 15) + tmp -= ('a' - 'A'); + if(tmp > 15) { + printf("Conversion error on %c, bailing out.\n", *cp); + break; + } + if((j % 2) == 0) + dout[j / 2] = (tmp << 4); + else + dout[j / 2] |= tmp; + } + } + +printf("spi_chipsel[%d] = %08X\n", device, (uint)spi_chipsel[device]); + if(spi_xfer(spi_chipsel[device], bitlen, dout, din) != 0) { + printf("Error with the SPI transaction.\n"); + rcode = 1; + } else { + cp = din; + for(j = 0; j < ((bitlen + 7) / 8); j++) { + printf("%02X", *cp++); + } + printf("\n"); + } + + return rcode; +} + +#endif /* CFG_CMD_SPI */ + diff --git a/common/soft_spi.c b/common/soft_spi.c new file mode 100644 index 0000000000..a5b62f28ea --- /dev/null +++ b/common/soft_spi.c @@ -0,0 +1,138 @@ +/* + * (C) Copyright 2002 + * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com. + * + * Influenced by code from: + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#if defined(CONFIG_SOFT_SPI) + +#define DEBUG_SPI + + +/*----------------------------------------------------------------------- + * Definitions + */ + +#ifdef DEBUG_SPI +#define PRINTD(fmt,args...) printf (fmt ,##args) +#else +#define PRINTD(fmt,args...) +#endif + + + +/*=====================================================================*/ +/* Public Functions */ +/*=====================================================================*/ + +/*----------------------------------------------------------------------- + * Initialization + */ +void spi_init (void) +{ +#ifdef SPI_INIT + volatile immap_t *immr = (immap_t *)CFG_IMMR; + + SPI_INIT; +#endif +} + + +/*----------------------------------------------------------------------- + * SPI transfer + * + * This writes "bitlen" bits out the SPI MOSI port and simultaneously clocks + * "bitlen" bits in the SPI MISO port. That's just the way SPI works. + * + * The source of the outgoing bits is the "dout" parameter and the + * destination of the input bits is the "din" parameter. Note that "dout" + * and "din" can point to the same memory location, in which case the + * input data overwrites the output data (since both are buffered by + * temporary variables, this is OK). + * + * If the chipsel() function is not NULL, it is called with a parameter + * of '1' (chip select active) at the start of the transfer and again with + * a parameter of '0' at the end of the transfer. + * + * If the chipsel() function _is_ NULL, it the responsibility of the + * caller to make the appropriate chip select active before calling + * spi_xfer() and making it inactive after spi_xfer() returns. + */ +int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din) +{ + volatile immap_t *immr = (immap_t *)CFG_IMMR; + uchar tmpdin = 0; + uchar tmpdout = 0; + int j; + + PRINTD("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n", + (int)chipsel, *(uint *)dout, *(uint *)din, bitlen); + + if(chipsel != NULL) { + (*chipsel)(1); /* select the target chip */ + } + + for(j = 0; j < bitlen; j++) { + /* + * Check if it is time to work on a new byte. + */ + if((j % 8) == 0) { + tmpdout = *dout++; + if(j != 0) { + *din++ = tmpdin; + } + tmpdin = 0; + } + SPI_SCL(0); + SPI_SDA(tmpdout & 0x80); + SPI_DELAY; + SPI_SCL(1); + SPI_DELAY; + tmpdin <<= 1; + tmpdin |= SPI_READ; + tmpdout <<= 1; + } + /* + * If the number of bits isn't a multiple of 8, shift the last + * bits over to left-justify them. Then store the last byte + * read in. + */ + if((bitlen % 8) != 0) + tmpdin <<= 8 - (bitlen % 8); + *din++ = tmpdin; + + SPI_SCL(0); /* SPI wants the clock left low for idle */ + + if(chipsel != NULL) { + (*chipsel)(0); /* deselect the target chip */ + + } + + return(0); +} + +#endif /* CONFIG_SOFT_SPI */ + diff --git a/cpu/mpc8260/status_led.c b/cpu/mpc8260/status_led.c new file mode 100644 index 0000000000..0174e39916 --- /dev/null +++ b/cpu/mpc8260/status_led.c @@ -0,0 +1,160 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +/* + * The purpose of this code is to signal the operational status of a + * target which usually boots over the network; while running in + * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply + * message has been received, the LED is turned off. The Linux + * kernel, once it is running, will start blinking the LED again, + * with another frequency. + */ + +/* ------------------------------------------------------------------------- */ + +#ifdef CONFIG_STATUS_LED + +typedef struct { + ulong mask; + int state; + int period; + int cnt; +} led_dev_t; + +led_dev_t led_dev[] = { + { STATUS_LED_BIT, + STATUS_LED_STATE, + STATUS_LED_PERIOD, + 0, + }, +#if defined(STATUS_LED_BIT1) + { STATUS_LED_BIT1, + STATUS_LED_STATE1, + STATUS_LED_PERIOD1, + 0, + }, +#endif +#if defined(STATUS_LED_BIT2) + { STATUS_LED_BIT2, + STATUS_LED_STATE2, + STATUS_LED_PERIOD2, + 0, + }, +#endif +}; + +#define MAX_LED_DEV (sizeof(led_dev)/sizeof(led_dev_t)) + +static int status_led_init_done = 0; + +static void status_led_init (void) +{ + volatile immap_t *immr = (immap_t *)CFG_IMMR; + int i; + + for (i=0; iSTATUS_LED_PAR &= ~(ld->mask); +#ifdef STATUS_LED_ODR + immr->STATUS_LED_ODR &= ~(ld->mask); +#endif +#if (STATUS_LED_ACTIVE == 0) + if (ld->state == STATUS_LED_ON) + immr->STATUS_LED_DAT &= ~(ld->mask); + else + immr->STATUS_LED_DAT |= ld->mask ; +#else + if (ld->state == STATUS_LED_ON) + immr->STATUS_LED_DAT |= ld->mask ; + else + immr->STATUS_LED_DAT &= ~(ld->mask); +#endif + immr->STATUS_LED_DIR |= ld->mask ; + } + + status_led_init_done = 1; +} + +void status_led_tick (ulong timestamp) +{ + volatile immap_t *immr = (immap_t *)CFG_IMMR; + int i; + + if (!status_led_init_done) + status_led_init(); + + for (i=0; istate != STATUS_LED_BLINKING) + continue; + + if (++(ld->cnt) >= ld->period) { + immr->STATUS_LED_DAT ^= ld->mask; + ld->cnt -= ld->period; + } + } +} + +void status_led_set (int led, int state) +{ + volatile immap_t *immr = (immap_t *)CFG_IMMR; + led_dev_t *ld; + + if (led < 0 || led >= MAX_LED_DEV) + return; + + if (!status_led_init_done) + status_led_init(); + + ld = &led_dev[led]; + + switch (state) { + default: + return; + case STATUS_LED_BLINKING: + ld->cnt = 0; /* always start with full period */ + /* fall through */ /* always start with LED _ON_ */ + case STATUS_LED_ON: +#if (STATUS_LED_ACTIVE == 0) + immr->STATUS_LED_DAT &= ~(ld->mask); +#else + immr->STATUS_LED_DAT |= ld->mask ; +#endif + break; + case STATUS_LED_OFF: +#if (STATUS_LED_ACTIVE == 0) + immr->STATUS_LED_DAT |= ld->mask ; +#else + immr->STATUS_LED_DAT &= ~(ld->mask); +#endif + break; + } + ld->state = state; +} + +#endif /* CONFIG_STATUS_LED */ -- 2.25.1