From 2fbdbda1c7c48aa622812054633afc6cdff91eab Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 18 Aug 2015 09:27:17 +0200 Subject: [PATCH] arm: spear: Move to common SPL infrastructure The SPL implementation for SPEAr600 is older than the common SPL infrastructure. This patch now moves the SPEAr600 SPL over to the common SPL code. Tested on the only SPEAr board that currently uses SPL in mainline U-Boot, the x600. Signed-off-by: Stefan Roese Acked-by: Viresh Kumar Cc: Vipin Kumar --- arch/arm/cpu/arm926ejs/spear/Makefile | 2 +- arch/arm/cpu/arm926ejs/spear/spear600.c | 23 ++- arch/arm/cpu/arm926ejs/spear/spl.c | 74 ++++---- arch/arm/cpu/arm926ejs/spear/spl_boot.c | 181 -------------------- arch/arm/cpu/arm926ejs/spear/start.S | 3 +- arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 54 +++--- arch/arm/include/asm/arch-spear/spr_defs.h | 2 - include/configs/x600.h | 17 +- 8 files changed, 85 insertions(+), 271 deletions(-) delete mode 100644 arch/arm/cpu/arm926ejs/spear/spl_boot.c diff --git a/arch/arm/cpu/arm926ejs/spear/Makefile b/arch/arm/cpu/arm926ejs/spear/Makefile index 3f190bc0c0..7b15d4ef7e 100644 --- a/arch/arm/cpu/arm926ejs/spear/Makefile +++ b/arch/arm/cpu/arm926ejs/spear/Makefile @@ -10,7 +10,7 @@ obj-y := cpu.o \ timer.o ifdef CONFIG_SPL_BUILD -obj-y += spl.o spl_boot.o +obj-y += spl.o obj-$(CONFIG_SPEAR600) += spear600.o obj-$(CONFIG_DDR_MT47H64M16) += spr600_mt47h64m16_3_333_cl5_psync.o obj-$(CONFIG_DDR_MT47H32M16) += spr600_mt47h32m16_333_cl5_psync.o diff --git a/arch/arm/cpu/arm926ejs/spear/spear600.c b/arch/arm/cpu/arm926ejs/spear/spear600.c index 6474e9d554..1fdf715da4 100644 --- a/arch/arm/cpu/arm926ejs/spear/spear600.c +++ b/arch/arm/cpu/arm926ejs/spear/spear600.c @@ -12,6 +12,21 @@ #include #include +void spear_late_init(void) +{ + struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE; + + writel(0x80000007, &misc_p->arb_icm_ml1); + writel(0x80000007, &misc_p->arb_icm_ml2); + writel(0x80000007, &misc_p->arb_icm_ml3); + writel(0x80000007, &misc_p->arb_icm_ml4); + writel(0x80000007, &misc_p->arb_icm_ml5); + writel(0x80000007, &misc_p->arb_icm_ml6); + writel(0x80000007, &misc_p->arb_icm_ml7); + writel(0x80000007, &misc_p->arb_icm_ml8); + writel(0x80000007, &misc_p->arb_icm_ml9); +} + static void sel_1v8(void) { struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE; @@ -103,14 +118,6 @@ void plat_ddr_init(void) } } -/* - * soc_init: - */ -void soc_init(void) -{ - /* Nothing to be done for SPEAr600 */ -} - /* * xxx_boot_selected: * diff --git a/arch/arm/cpu/arm926ejs/spear/spl.c b/arch/arm/cpu/arm926ejs/spear/spl.c index b550404352..a60f5838de 100644 --- a/arch/arm/cpu/arm926ejs/spear/spl.c +++ b/arch/arm/cpu/arm926ejs/spear/spl.c @@ -8,12 +8,14 @@ */ #include +#include #include #include #include #include #include #include +#include static void ddr_clock_init(void) { @@ -205,55 +207,51 @@ int get_socrev(void) #endif } -void lowlevel_init(void) +/* + * SNOR (Serial NOR flash) related functions + */ +static void snor_init(void) +{ + struct smi_regs *const smicntl = + (struct smi_regs * const)CONFIG_SYS_SMI_BASE; + + /* Setting the fast mode values. SMI working at 166/4 = 41.5 MHz */ + writel(HOLD1 | FAST_MODE | BANK_EN | DSEL_TIME | PRESCAL4, + &smicntl->smi_cr1); +} + +u32 spl_boot_device(void) +{ + u32 mode; + + /* Currently only SNOR is supported as the only */ + if (snor_boot_selected()) { + /* SNOR-SMI initialization */ + snor_init(); + + mode = BOOT_DEVICE_NOR; + } + + return mode; +} + +void board_init_f(ulong dummy) { struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE; - const char *u_boot_rev = U_BOOT_VERSION; /* Initialize PLLs */ sys_init(); - /* Initialize UART */ - serial_init(); - - /* Print U-Boot SPL version string */ - serial_puts("\nU-Boot SPL "); - /* Avoid a second "U-Boot" coming from this string */ - u_boot_rev = &u_boot_rev[7]; - serial_puts(u_boot_rev); - serial_puts(" ("); - serial_puts(U_BOOT_DATE); - serial_puts(" - "); - serial_puts(U_BOOT_TIME); - serial_puts(")\n"); - -#if defined(CONFIG_OS_BOOT) - writel(readl(&misc_p->periph1_clken) | PERIPH_UART1, - &misc_p->periph1_clken); -#endif + preloader_console_init(); + arch_cpu_init(); /* Enable IPs (release reset) */ writel(PERIPH_RST_ALL, &misc_p->periph1_rst); /* Initialize MPMC */ - serial_puts("Configure DDR\n"); + puts("Configure DDR\n"); mpmc_init(); + spear_late_init(); - /* SoC specific initialization */ - soc_init(); -} - -void spear_late_init(void) -{ - struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE; - - writel(0x80000007, &misc_p->arb_icm_ml1); - writel(0x80000007, &misc_p->arb_icm_ml2); - writel(0x80000007, &misc_p->arb_icm_ml3); - writel(0x80000007, &misc_p->arb_icm_ml4); - writel(0x80000007, &misc_p->arb_icm_ml5); - writel(0x80000007, &misc_p->arb_icm_ml6); - writel(0x80000007, &misc_p->arb_icm_ml7); - writel(0x80000007, &misc_p->arb_icm_ml8); - writel(0x80000007, &misc_p->arb_icm_ml9); + board_init_r(NULL, 0); } diff --git a/arch/arm/cpu/arm926ejs/spear/spl_boot.c b/arch/arm/cpu/arm926ejs/spear/spl_boot.c deleted file mode 100644 index c846d758c9..0000000000 --- a/arch/arm/cpu/arm926ejs/spear/spl_boot.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * (C) Copyright 2000-2009 - * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com - * - * Copyright (C) 2012 Stefan Roese - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -static const char kernel_name[] = "Linux"; -static const char loader_name[] = "U-Boot"; - -int image_check_header(image_header_t *hdr, const char *name) -{ - if (image_check_magic(hdr) && - (!strncmp(image_get_name(hdr), name, strlen(name))) && - image_check_hcrc(hdr)) { - return 1; - } - return 0; -} - -int image_check_data(image_header_t *hdr) -{ - if (image_check_dcrc(hdr)) - return 1; - - return 0; -} - -/* - * SNOR (Serial NOR flash) related functions - */ -void snor_init(void) -{ - struct smi_regs *const smicntl = - (struct smi_regs * const)CONFIG_SYS_SMI_BASE; - - /* Setting the fast mode values. SMI working at 166/4 = 41.5 MHz */ - writel(HOLD1 | FAST_MODE | BANK_EN | DSEL_TIME | PRESCAL4, - &smicntl->smi_cr1); -} - -static int snor_image_load(u8 *load_addr, void (**image_p)(void), - const char *image_name) -{ - image_header_t *header; - - /* - * Since calculating the crc in the SNOR flash does not - * work, we copy the image to the destination address - * minus the header size. And point the header to this - * new destination. This will not work for address 0 - * of course. - */ - header = (image_header_t *)load_addr; - memcpy((ulong *)(image_get_load(header) - sizeof(image_header_t)), - (const ulong *)load_addr, - image_get_data_size(header) + sizeof(image_header_t)); - header = (image_header_t *)(image_get_load(header) - - sizeof(image_header_t)); - - if (image_check_header(header, image_name)) { - if (image_check_data(header)) { - /* Jump to boot image */ - *image_p = (void *)image_get_load(header); - return 1; - } - } - - return 0; -} - -static void boot_image(void (*image)(void)) -{ - void (*funcp)(void) __noreturn = (void *)image; - - (*funcp)(); -} - -/* - * spl_boot: - * - * All supported booting types of all supported SoCs are listed here. - * Generic readback APIs are provided for each supported booting type - * eg. nand_read_skip_bad - */ -u32 spl_boot(void) -{ - void (*image)(void); - -#ifdef CONFIG_SPEAR_USBTTY - plat_late_init(); - return 1; -#endif - - /* - * All the supported booting devices are listed here. Each of - * the booting type supported by the platform would define the - * macro xxx_BOOT_SUPPORTED to true. - */ - - if (SNOR_BOOT_SUPPORTED && snor_boot_selected()) { - /* SNOR-SMI initialization */ - snor_init(); - - serial_puts("Booting via SNOR\n"); - /* Serial NOR booting */ - if (1 == snor_image_load((u8 *)CONFIG_SYS_UBOOT_BASE, - &image, loader_name)) { - /* Platform related late initialasations */ - plat_late_init(); - - /* Jump to boot image */ - serial_puts("Jumping to U-Boot\n"); - boot_image(image); - return 1; - } - } - - if (NAND_BOOT_SUPPORTED && nand_boot_selected()) { - /* NAND booting */ - /* Not ported from XLoader to SPL yet */ - return 0; - } - - if (PNOR_BOOT_SUPPORTED && pnor_boot_selected()) { - /* PNOR booting */ - /* Not ported from XLoader to SPL yet */ - return 0; - } - - if (MMC_BOOT_SUPPORTED && mmc_boot_selected()) { - /* MMC booting */ - /* Not ported from XLoader to SPL yet */ - return 0; - } - - if (SPI_BOOT_SUPPORTED && spi_boot_selected()) { - /* SPI booting */ - /* Not supported for any platform as of now */ - return 0; - } - - if (I2C_BOOT_SUPPORTED && i2c_boot_selected()) { - /* I2C booting */ - /* Not supported for any platform as of now */ - return 0; - } - - /* - * All booting types without memory are listed as below - * Control has to be returned to BootROM in case of all - * the following booting scenarios - */ - - if (USB_BOOT_SUPPORTED && usb_boot_selected()) { - plat_late_init(); - return 1; - } - - if (TFTP_BOOT_SUPPORTED && tftp_boot_selected()) { - plat_late_init(); - return 1; - } - - if (UART_BOOT_SUPPORTED && uart_boot_selected()) { - plat_late_init(); - return 1; - } - - /* Ideally, the control should not reach here. */ - hang(); -} diff --git a/arch/arm/cpu/arm926ejs/spear/start.S b/arch/arm/cpu/arm926ejs/spear/start.S index 290ac2e561..f392e7b7d5 100644 --- a/arch/arm/cpu/arm926ejs/spear/start.S +++ b/arch/arm/cpu/arm926ejs/spear/start.S @@ -45,7 +45,6 @@ reset: * BSS area lies in the DDR location which is not yet initialized * bss is assumed to be uninitialized. */ - bl spl_boot ldmia sp!, {r0-r12,pc} /* @@ -77,5 +76,5 @@ cpu_init_crit: * Go setup Memory and board specific bits prior to relocation. */ stmdb sp!, {lr} - bl lowlevel_init /* go setup pll,mux,memory */ + bl _main /* _main will call board_init_f */ ldmia sp!, {pc} diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds index c7ee19912f..47910d3e4f 100644 --- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds @@ -1,4 +1,6 @@ /* + * Copyright (C) 2015 Stefan Roese + * * Copyright (C) 2011 Marek Vasut * on behalf of DENX Software Engineering GmbH * @@ -11,59 +13,43 @@ * SPDX-License-Identifier: GPL-2.0+ */ +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } + OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") OUTPUT_ARCH(arm) ENTRY(_start) SECTIONS { - . = 0x00000000; - - . = ALIGN(4); - .text : + .text : { + __start = .; *(.vectors) - arch/arm/cpu/arm926ejs/spear/start.o (.text*) + CPUDIR/spear/start.o (.text*) *(.text*) - } + } > .sram . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram . = ALIGN(4); - .data : { - *(.data*) - } + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } > .sram - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } + . = ALIGN(4); + __image_copy_end = .; + _end = .; - .bss : { + .bss : + { . = ALIGN(4); __bss_start = .; *(.bss*) . = ALIGN(4); __bss_end = .; - } - - .end : - { - *(.__end) - } - - _image_binary_end = .; - - .dynsym _image_binary_end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } + } > .sram } diff --git a/arch/arm/include/asm/arch-spear/spr_defs.h b/arch/arm/include/asm/arch-spear/spr_defs.h index 7e77a3033c..bece2d69ac 100644 --- a/arch/arm/include/asm/arch-spear/spr_defs.h +++ b/arch/arm/include/asm/arch-spear/spr_defs.h @@ -13,9 +13,7 @@ extern void setfreq(unsigned int, unsigned int); extern unsigned int setfreq_sz; void plat_ddr_init(void); -void soc_init(void); void spear_late_init(void); -void plat_late_init(void); int snor_boot_selected(void); int nand_boot_selected(void); diff --git a/include/configs/x600.h b/include/configs/x600.h index edb16b1a70..70e633c274 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -2,7 +2,7 @@ * (C) Copyright 2009 * Vipin Kumar, STMicroelectronics, * - * Copyright (C) 2012 Stefan Roese + * Copyright (C) 2012, 2015 Stefan Roese * * SPDX-License-Identifier: GPL-2.0+ */ @@ -162,7 +162,8 @@ /* Use last 2 lwords in internal SRAM for bootcounter */ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_SYS_BOOTCOUNT_ADDR 0xd2801ff8 +#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SRAM_BASE + \ + CONFIG_SRAM_SIZE) #define CONFIG_HOSTNAME x600 #define CONFIG_UBI_PART ubi0 @@ -248,8 +249,11 @@ #define PHYS_SDRAM_1_MAXSIZE 0x40000000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 +#define CONFIG_SRAM_BASE 0xd2800000 +/* Preserve the last 2 lwords for the boot-counter */ +#define CONFIG_SRAM_SIZE ((8 << 10) - 0x8) +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SRAM_BASE +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SRAM_SIZE #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) @@ -260,10 +264,13 @@ /* * SPL related defines */ -#define CONFIG_SPL_TEXT_BASE 0xd2800b00 +#define CONFIG_SPL_TEXT_BASE 0xd2800b00 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SRAM_SIZE - 0xb00) #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear" #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds" +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_NOR_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ #define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ -- 2.25.1